CS Paper Radar

V2-STRep: VLM-Grounded Structured Task Representations for Reusable Robot Skills Acquired from Generated Videos

Yexin Hu, Dongheui Lee

cs.RO ·submitted 2026-09-17 15:37 UTC · v2

Abstract

Human manipulation videos provide rich motion and interaction cues for acquiring robot skills without robot demonstrations. Video generation models synthesize such demonstrations from an initial scene image and task instruction, avoiding the need to record demonstrations for each task. However, the recovered motion captures only one scene-specific realization, leaving task structure, geometric relations, and constraints implicit. We present V2-STRep, a zero-shot framework that converts generated video motion into reusable robot skills through VLM-grounded structured task representations. The representation specifies motion phases, references, and task-relevant constraints, with targets described by minimal geometric structures: points, point-normals, axes, planes, and full 6D poses. VLM-provided 2D image-space cues are lifted into 3D using RGB-D observations to reconstruct task geometry and candidate grasp poses. Geometry-specific rules transfer motion to new scenes, while task-constrained trajectory optimization couples grasp selection with complete robot motion planning. It preserves task requirements while using remaining rotational freedom to accommodate joint limits. Updating deployment grounding and constraints enables reuse under new compatible instructions without generating another video. Experiments on six real-world manipulation tasks demonstrate improved execution success over baselines, reliable cross-scene transfer of successfully acquired skills, and adaptation to changed deployment instructions. Details are available on the project website: https://tuwien-asl.github.io/V2-STRep/.

Closest papers

Nearest neighbours by meaning across the whole index.

Gen2Dex: Learning Dexterous Manipulation from Simulation-Initialized Generated Video Demonstrations

cs.RO ·2026-10-17 ·Xiaowen Qiu, Yian Wang, Haoxiang You, Chuang Gan
similarity 0.80
Abstract

Human video demonstrations provide rich manipulation strategies for dexterous manipulation learning. We study a setting in which a fully specified simulated scene is used to generate videos that specify the demonstrated manipulation behavior. This setup provides access to scene information such as object geometry, articulation, and camera parameters, while allowing direct control over task and scene configuration. However, generated videos may contain geometric distortions, inaccurate contacts, and other physical inconsistencies, making the recovered motion difficult to execute directly on a robot. We present an end-to-end framework for converting such simulation-grounded videos into physically executable dexterous robot demonstrations. Our perception pipeline leverages the known scene through model-based object tracking with dense foundation-model features and depth-based hand-object alignment. The recovered human motion is then retargeted and physically grounded using residual reinforcement learning, where a backward curriculum and a cache of physically valid reset states enable the policy to correct imperfect video-derived references while preserving the demonstrated manipulation strategy. On clean ARCTIC demonstrations, our method achieves competitive performance with prior dexterous retargeting approaches and shows greater robustness when applied to references extracted from generated videos. We further demonstrate diverse rigid and articulated manipulation tasks in simulation and successful open-loop transfer of the optimized trajectories to a real dexterous robot.

0.15

VLMs are Native Action Models: Unleashing the Manipulation Capabilities of VLMs with Explicit Action-Space Grounding

cs.RO ·2026-10-09 ·Jingkun Yi, Shujie Zhang, Zirui Zhou, Haoxiao Wang, Haiyang Sun +6 more
code/data similarity 0.78
Abstract · 30 pages, 13 figures. Project page: https://general-robo.github.io/EASG/

Pretrained vision-language models (VLMs) already exhibit strong visual, spatial and reasoning capabilities relevant to robotic manipulation. The key challenge in turning pretrained VLMs into generalist manipulation policies is to expose these capabilities through an appropriate action interface. Vision-language-action (VLA) models provide a unified trainable policy, but typically introduce learned action tokens, action heads, or action experts whose semantics must be learned from robot data pretraining. In contrast, modular foundation-model-based manipulation methods can exploit pretrained VLM capabilities for zero-shot manipulation, but rely on external planning and control scaffolds that are not end-to-end trainable as a unified continuous-action policy. In this work, we introduce EASG, an Explicit Action-Space Grounding framework that bridges these two paradigms. By projecting a tool center point (TCP)-centered action frame into the wrist camera observation and expressing actions in the form of VLM's native textual generation interface, EASG makes the semantics of a continuous robot action space directly observable in the VLM's perceptual context. This allows pretrained VLMs to directly generate executable robot actions using their existing visual-spatial reasoning capabilities, without robot-action pretraining or additional action modules. Besides, the same action interface supports direct fine-tuning with robot trajectories, allowing the models to continuously improve beyond their manipulation capabilities unleashed by EASG. Overall, EASG enables zero-shot manipulation and generalization across object positions, categories, and robot embodiments, while supporting effective fine-tuning in the same continuous action space. These results demonstrate that, given an appropriate action interface, pretrained VLMs can themselves serve as native action models for robotic manipulation.

0.53

GTA-2: A Multi-VLM Framework for Synthesizing Robot Manipulation Skills via Grounded Task Axes

cs.RO ·2026-09-09 ·M. Yunus Seker, Shobhit Aggarwal, Ruwan Wickramarachchi, Jonathan Francis, Oliver Kroemer
code/data similarity 0.77
Abstract

Robotic manipulation tasks are often decomposed into behaviors or skills. However, one often needs to predefine these behaviors for specific tasks or try to cover a wide range of tasks using generic skills. As a result, these behaviors can remain too coarse to expose the geometric, control, and scene-dependent decisions required for execution. We introduce Grounded Task Axes v2 (GTA-2), a modular multi-VLM framework that constructs executable, task-bespoke manipulation skills from reusable object-centric task-axis components. Rather than predicting actions end-to-end or composing fixed task-level primitives, GTA-2 represents each skill as semantic subtasks comprising task-relevant keypoints and axes, controller compositions, and scene-dependent parameters. Four specialized VLM agents separately decompose the task, construct an abstract task-axis skill, assign controller parameters, and ground the required visual features from RGB-D observations. This abstraction-to-grounding factorization enables zero-shot skill generation without task-specific robot demonstrations, policy training, or fine-tuning. It also keeps intermediate decisions explicit, allowing targeted human feedback to refine an incorrect stage while preserving correct components. We evaluate GTA-2 on 14 real-robot manipulation tasks against a VLA policy pi_{0.5} and two Code-as-Policies baselines using task-axis controllers or conventional robot primitives. GTA-2 achieves an average zero-shot success rate of 73.9%, exceeding the strongest baseline by 31.4 percentage points, while targeted refinement raises GTA-2's average success rate to 90.7%. Project page: https://gta2-project.github.io/

0.27

SAKI: Skill Assembly and Kinematic Imitation from Human Videos for Long-Horizon Mobile Manipulation

cs.RO ·2026-09-28 ·Yijie Lu, James Zhao, Weiming Zhi
similarity 0.76
Abstract · 8 pages, 9 figures, 5 tables

Learning from human videos offers a promising route to acquiring diverse manipulation skills. Extending this capability beyond tabletop settings to long-horizon mobile manipulation requires adapting and composing demonstrated interactions across changing scenes and robot configurations. We present Skill Assembly and Kinematic Imitation (SAKI), a framework connecting human-video skill acquisition, cross-demonstration assembly and closed-loop whole-body execution. SAKI prepares reusable object-centric skills that preserve task-critical interactions while allowing transfer paths to adapt. Given a goal and supplied task dependencies, it selects and orders skills, binds their object roles to the current scene, and carries scene estimates and robot configuration between successive skills. Whole-body kinematic imitation generates coordinated base, arm and gripper motion. During execution, persistent object estimates maintain task references across viewpoint changes, while visual feedback updates remaining trajectories. Real-robot experiments demonstrate skill reuse across layouts and the composition of independently demonstrated interactions into continuous mobile tasks, including tidying and wiping. Ablation results show that task-conditioned reference preparation substantially improves long-horizon task completion with whole-body optimisation and visual feedback held fixed. Check https://aus.bot/research/saki/ for video demos!

0.30

VidAct: Learning Manipulation from In-the-Wild Videos with Object-Centric 3D Awareness

cs.RO ·2026-09-29 ·Hang Li, Mingxin Zhang, Zihan Wu, Yang Tian, Dong Chen +7 more
similarity 0.76
Abstract

Video demonstrations offer a scalable alternative to costly robot data for learning manipulation, yet existing reconstruction-based approaches often rely on constrained camera viewpoints or human-to-robot retargeting, while the reconstructed trajectories are difficult to adapt to new objects configurations without distorting the trajectory shape. Another key limitation is that the resulting policies often lack precise object-level 3D geometry awareness, limiting object grounding and object shape awareness critical for precise manipulation. To bridge these gaps, we propose VidAct, an efficient video-to-robot framework that learns object-centric, 3D-aware manipulation policies from a single monocular video per task and enables zero-shot real-world deployment. VidAct consists of three key components. First, VidAct reconstructs object meshes and motion from arbitrary demo videos and canonicalizes the motion in the static object frame, avoiding embodiment-specific retargeting and accommodating diverse camera viewpoints. Second, VidAct employ residual trajectory transfer for adapting the reconstructed motion to novel object configurations while preserving its motion shape. Finally, as the key policy-learning component, VidAct predicts simulation-provided privileged complete-object point clouds at each frame as an auxiliary task while retaining RGB-only deployment, providing dense object-centric supervision over both object pose and 3D geometry. Experiments on human, robot, generated, and internet videos demonstrate broad video applicability and zero-shot deployment. Per-frame complete-object 3D supervision improves policy generalization and sim-to-real success, while residual trajectory transfer enables reliable trajectory adaptation with better shape preservation.

0.37

KnowDemo: Knowledge-Guided Robot Demonstration Generation from Human Videos

cs.RO cs.AI ·2026-09-18 ·Zhiyuan Gao, Yanxiang Zhan, Mohammad Khoshnazar, Jeroen Schäfer, Michael Beetz
code/data similarity 0.76
Abstract

Learning robot manipulation policies typically requires substantial demonstration data, which are costly to collect on real robots. Recent methods generate robot demonstrations from human videos by adapting recovered motion and validating the resulting trajectories in simulation. However, methods centered on motion-reference adaptation can limit behavioral diversity by retaining the demonstrated contact strategies and subtask orders, while insufficient understanding of task requirements and scene relations can reduce demonstration generation efficiency by generating invalid candidates. To address these limitations, we propose KnowDemo, a framework that uses structured manipulation knowledge from human videos to generate diverse robot demonstrations for a target workspace. To distinguish task requirements from demonstration-specific choices, we develop a knowledge extraction and reasoning module based on a vision-language model (VLM) that associates object and action descriptions with inferred task conditions, demonstration references, and permissible execution variations. To translate this knowledge into executable demonstrations, we resolve the descriptions against target-scene entities and geometry to guide candidate generation and screening before motion planning and simulation. The resulting demonstrations exhibit multimodal behavior through alternative contact strategies and valid subtask orders, with structured execution labels. Experiments demonstrate additional verified execution modes beyond a reference-only configuration and improved candidate planning success through task-guided grasp sampling. To validate the generated data for policy learning, we fine-tune the pretrained $π_{0.5}$ model on simulation data, achieving sim-to-real transfer across three tasks. Project page: https://zhiyuan-gao.github.io/knowdemo/

0.25

CASTER: Formalizing Zero-Shot Manipulation from Synthetic Videos as Constrained Optimization

cs.RO cs.CV ·2026-10-08 ·Yinlong Dai, Homanga Bharadhwaj, Dylan P. Losey
similarity 0.76
Abstract

Prior research on learning from humans often requires real human demonstrations. But advances in video generation models offer a new paradigm: we can now prompt these generators to make synthetic videos of the task. On the plus side, these synthetic videos take place in the robot's current environment, and do not require actual human teaching. However, while the generated videos appear to show plausible motions, they lack both physical consistency and robot grounding, and thus the robot cannot directly roll out the trajectory shown by the video. In this paper we seek to formalize the process of going from synthetic video generation to real-world robot trajectories for zero-shot manipulation tasks. We recognize that this problem is an instance of constrained optimization. The object trajectories extracted from the synthetic video provide an initial guess at the correct motion, and the robot must refine these trajectories (for instance, within a digital twin) while enforcing physical feasibility and semantic consistency. Our optimization-based formalism provides insights into the video generation properties necessary for success. Specifically, we show that the video generation must probabilistically seed the search within a semantic basin of attraction where the trajectory can be locally modified without losing its task alignment. Our analysis further reveals that state-of-the-art approaches can be viewed as instances of our unified formalism with key simplifications. In our experiments we remove these simplifications to more closely match the underlying optimization, leading to more robust zero-shot trajectories from synthetic videos and improving average task success by 34.1% compared to the best-performing baseline. See videos at our project website: https://collab.me.vt.edu/CASTER

0.28

HiWE: Hierarchical World Knowledge Model with Visual Keypoint Enhancement for Zero-Shot 3D Path Planning

cs.RO cs.AI ·2026-09-30 ·Guoqing Ma, Mingqi Yuan, Chen Gao, Jiayu Chen, Shan Yu
similarity 0.75
Abstract

Robot demonstration generation requires a system to identify where an interaction should occur, plan a feasible motion, and execute the required contact. HiWE connects these decisions through a point-based interface between visual grounding and language-based planning. PointVLM is instruction-tuned to associate task-relevant objects with image coordinates using a mixture of point annotations, segmentation-derived samples, robot observations, and visual question answering data. Depth measurements lift these predictions into a semantic 3D representation. A language planner, 3DLLM, uses this representation to specify end-effector waypoints and gripper commands, while a hybrid grasping module resolves local grasp poses. The evaluation covers 14 simulated manipulation tasks and four physical-robot tasks, together with ablations of the visual training data, spatial inputs, and grasp selection. Here, zero-shot execution refers to deployment without task-specific demonstration training; the visual model uses existing robot data during fine-tuning. This paper describes the original point-based formulation of the framework; its relationship to the subsequent GeneralVLA extension is detailed in the introduction.

0.19