CS Paper Radar

An Approximate Queueing Model of LLM Inference Serving for SLO-Driven Autoscaling

Vishakha Ramani, Asser N. Tantawi

cs.PF ·submitted 2026-09-17 18:11 UTC · v1

Abstract

Performance models of LLM servers support both latency evaluation and the design of controllers for autoscaling against service level objectives (SLOs) and for inference optimization. We model the multiplexed execution of prefill and decode operations with a tractable, approximate queueing model under Markovian assumptions. Three parameters characterize a model-accelerator pair, namely a baseline per-iteration overhead, a per-token compute cost, and a per-token key-value (KV) cache access cost. The model combines a mean-value analysis of per-iteration work with a state-dependent Markov chain for batch occupancy to predict mean time to first token (TTFT) and inter-token latency (ITL). We validate these predictions against measurements and show that the three parameters can be estimated from observed latencies. Over a grid of input and output lengths and arrival rates spanning light to moderate load, the relative error of the average ITL is about 5% for Llama-3.1-8B and 8% for Qwen2.5-14B running on an H100 GPU, and the corresponding TTFT errors are 14% and 16%. We then implement an autoscaling controller that uses the model to adjust inference-server replica counts as the workload changes. On an OpenShift cluster of H100 GPUs it tracks a fourfold load ramp under both latency targets, missing one in 7 of 127 control cycles, and its in-loop predictions carry median errors of at most 5% for TTFT and 9% for ITL. A decode-throughput analyzer from an existing autoscaler, which takes no latency target, misses 27 of 128 cycles under the same controller and load while provisioning 4% and 28% fewer replicas.

Comment
13 pages, 4 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Simulate Before You Scale: High-Fidelity LLM Inference Planning Without GPUs

cs.PF ·2026-10-09 ·Dipanwita Guhathakurta, Mert Toslali, Srinivasan Parthasarathy, Jing Chen, Michael Kalantar +4 more
top venuecode/data similarity 0.72
Abstract · This paper is accepted at ACM SIGMETRICS 2027

Deploying large language model (LLM) inference at scale requires jointly selecting hardware layout, parallelism strategy, scheduling policy, admission control, and request routing to meet latency and throughput targets. These choices interact: a routing decision that improves cache locality can concentrate load, and an admission threshold that triggers only at saturation allows queues to grow deep enough to degrade critical-tier traffic. Evaluating candidates on GPU clusters is too expensive for iterative exploration, yet existing predictive tools either ignore batching and queueing dynamics or model only fragments of the pipeline. In this paper, we present BLIS, a deterministic, CPU-only discrete-event simulator that models the full inference serving pipeline (admission, routing, scheduling, prefill/decode execution, KV-cache management, and preemption). BLIS pairs analytical basis functions with learned scaling coefficients and overhead terms, fit once globally, to predict step latency without per-model or per-GPU profiling. Across 36 experiments spanning six models and three GPU types, BLIS achieves 6.7% median end-to-end error while running around 200 times faster than real execution. In a configuration search over 420 serving configurations for Llama-2-70B, BLIS identifies a 4-GPU deployment that meets a 300ms mean TTFT service-level objective (SLO), whereas competing tools either require double the GPUs or recommend configurations that fail under load. Two policies evolved entirely in simulation were validated on real hardware and merged into llm-d, a widely adopted open-source platform for distributed LLM serving: an admission policy that reduces critical-tier TTFT P90 by up to 82%, and a flow-control policy that reduces E2E P50 latency by 32-48% on overloaded workloads.

0.40

Characterization of Request and Token Energy Costs for LLM Inference Workloads on GPU Platforms

cs.PF cs.DCcs.LG ·2026-08-28 ·Prabhu Vellaisamy, Vanessa Lam, Shawn Blanton, John Paul Shen
publishedhighly cited similarity 0.70
Abstract · Accepted at the 2026 IEEE International Symposium on Workload Characterization (IISWC 2026). 13 pages, 6 figures, 9 tables

Large language model (LLM) inference serving is priced by tokens, but GPU energy is consumed over inference windows. This accounting mismatch makes token-normalized metrics incomplete, since average output-token energy can decrease even when total request energy increases. We characterize this behavior with a decomposed energy model: a fixed one-time prefill with a fixed generation setup cost, while each output-token generation step adds marginal step energy. We evaluate this LLM inference energy model on NVIDIA H100 and H200 GPUs across dense and mixture-of-experts (MoE) models, reporting both request energy and token energy as functions of model type (M), phase (P), batch size (B), context length (C), and output length (N). For Llama-3.2-1B on H200 at batch-16 and context-4K, increasing output length from 10 to 512 tokens reduces token energy from 7.46 to 0.72 J/token while total batched inference-window energy increases from 1.19 to 5.93 kJ. Batching also reduces token energy, but the gain is context-bounded: at 10 output tokens, the batch-16 to batch-1 gain falls from 6.31x at context-512 to 1.17x at context-4K. MoE models amplify this effect: sparse routing and fragmented expert execution increase fixed energy at low concurrency, while batching spreads that energy across more generated tokens and substantially narrows the dense-vs.-MoE token-energy gap. These results show that energy-aware serving should jointly optimize both request energy and token energy, rather than only reducing per-token energy cost.

0.44

Asymptotic Optimality of $cμ$-Rule for LLM Inference Scheduling under Memory Constraint

cs.AI math.OC ·2026-11-03 ·Zhenghao Li, Shengbo Wang, Nian Si
theory similarity 0.70
Abstract

Large language model (LLM) inference, the process by which a pre-trained model receives an input prompt and generates output tokens sequentially, has become increasingly important with the widespread deployment of LLM-based applications. As inference workloads continue to scale, GPU memory has emerged as a critical bottleneck: the long input prompts and generation sequences common in agentic and reasoning workloads lead to substantial key-value (KV) cache usage. In this paper, we study the resulting online scheduling problem from a queueing perspective. Requests arrive stochastically with heterogeneous prompt and output lengths, undergo prefill and autoregressive decode, and compete for a finite KV-cache capacity. Unlike classical queueing models, the duration of a processing step depends on both prefill computation and KV-cache I/O, so service capacity is jointly determined by computation, memory access, and memory occupancy. We develop a fluid model that reduces the system to a multiclass single-server queue with effective service rates capturing computation, memory access, and memory capacity. This fluid analysis yields a $cμ$ priority rule, where the effective service rate $μ$ is jointly determined by computational speed, memory bandwidth, and memory capacity. We prove that this rule minimizes cumulative holding cost in the fluid model and, for a finite workload, also minimizes completion time and maximizes full-run output-token throughput. We then construct a feasible scheduling policy for the original finite system and prove that its scaled dynamics converge to the optimal fluid policy. Finally, experiments on a real LLM serving engine using an NVIDIA H800 show that practical implementations of the proposed priority rule substantially reduce average latency while maintaining high throughput relative to existing scheduling policies.

0.20

Compositional Performance Modeling of LLM Inference Clusters with Hierarchical KV Caching

cs.PF cs.DC ·2026-10-11 ·Ruiyang Ma, Sheng Qi, DaiKang Kuang, Teng Ma, Guojie Luo
similarity 0.70
Abstract

Design-space exploration of LLM inference clusters requires predicting how hardware and serving policies interact with hierarchical key-value (KV) caching. Isolated operation profiles alone do not determine cluster latency: reuse changes computational demand, while KV location, capacity, and contention govern execution order. We present a compositional discrete-event simulator based on separating local service costs from shared resource and KV availability. Compute and transfer models calibrated on one-prefill/one-decode (1P-1D) deployments are reused across compatible workers, enabling policy and topology comparisons without per-configuration latency fitting. Validation against SGLang covers Qwen3-8B and Qwen3-32B on 1P-1D and 3P-1D clusters. Mean request end-to-end latency error is 1.34% for question answering and 6.36% for captured coding sessions, measured as mean absolute percentage error. CPU simulation reduces replay turnaround by 15.33 times on average; real replay includes prescribed arrival gaps. Measured session-affinity and simulated retention studies demonstrate how the framework guides policy selection by predicting the joint effects on computation, latency, and KV occupancy.

0.14

GAUSS: A Workload-Aware Analytical and Monte-Carlo Simulator for LLM Inference Serving

cs.AI ·2026-10-27 ·Srikant Bharadwaj, Ankur Mallick, Spyridon Mastorakis, Anjaly Parayil, Dhruv Deshmukh +1 more
hot direction similarity 0.69
Abstract

Large language model (LLM) inference has become an operational workload that fleets must provision, monitor, and bill against latency service-level objectives (SLOs). A single throughput number cannot answer the questions operators actually face, because generative serving couples two phases with very different service characteristics, continuous batching reshapes the effective service process, and user-visible tail latency can degrade long before aggregate throughput saturates. We present GAUSS, a workload-aware analytical and Monte-Carlo simulator that predicts the full distributions of time-to-first-token (TTFT) and time-between-tokens (TBT), together with the sustainable request rate, for a given workload, engine, and accelerator. GAUSS pairs calibrated, phase-specific latency surfaces for prefill and decode with a Lindley-recurrence model of queueing under stochastic arrivals and estimates performance by ensemble Monte-Carlo sampling rather than by replaying a single trace. This lets GAUSS reason about workloads, routing policies, and hardware that have never been deployed, and to capture the latency tails that trace-driven simulators systematically under-sample. We describe the model and show how it supports operating-point selection, traffic segmentation, and shortest-remaining-processing-time scheduling capacity questions that trace-driven simulators cannot address.

0.26

Scaling LLM Inference via Parallelism: Throughput-Latency Trade-off

cs.DC cs.AIcs.LGcs.PF ·2026-10-14 ·Javad Mirzaei, Jeebak Mitra
similarity 0.68
Abstract · 15 pages, 7 figures

Large Language Model (LLM) serving systems must balance latency and throughput while efficiently utilizing distributed GPU resources. This challenge arises because inference consists of two fundamentally different phases: prefill, which determines time-to-first-token (TTFT), and decode, which determines inter-token latency (ITL). The use of tensor parallelism (TP), pipeline parallelism (PP), and hybrid configurations exposes different trade-offs between these latency dimensions, making the optimal parallelism configuration highly dependent on workload characteristics, latency requirements, and context length. Moreover, despite the widespread adoption of distributed inference, there is still limited understanding of how parallelism configurations should be selected under varying workload conditions and service-level objectives (SLO). In this paper, we develop a systematic framework for characterizing LLM inference parallelism via throughput-latency trade-offs, SLO-aware serving, and long-context scalability. We introduce the notion of parallelism operating regions by constructing TTFT-ITL feasible sets and Pareto frontiers across different workload compositions, thereby revealing a systematic transition from TP-dominant to PP-dominant configurations as workloads become increasingly prefill-heavy. We further formulate SLO-aware parallelism selection using goodput, showing that stringent TTFT requirements favor PP-dominated configurations, whereas relaxed latency constraints progressively shift the optimality toward TP-dominated configurations with higher serving capacity. Finally, we demonstrate that increasing context length fundamentally changes the relative advantages of parallelism configurations, with PP-dominant configurations exhibiting more favorable scalability and SLO attainment in the long-context regime.

0.19

VelServe: Taming Decode Jitters in LLM Inference with Tail-Calibrated Scheduling

cs.AI ·2026-11-13 ·Ishaan Datta, Alind Khare, Koushik Kumar Dey, Ratnesh Jamidar, Anand Kumar Singh
similarity 0.68
Abstract

Interactive LLM services must meet latency service-level objectives (SLOs) for the time to first token (TTFT) and the time between tokens (TBT), as streaming and soft real-time applications require predictable token delivery. We identify decode jitters in both aggregated and disaggregated serving. A jitter delays every request in the batch, and long responses span hundreds of steps, so even rare overruns cause many SLO violations. In aggregated serving, SLO-aware schedulers set each step's prefill budget until its predicted latency just meets the TBT target, leaving no room for mispredictions or host stalls. Disaggregation meets average TBT targets at a cost in capacity, yet the steps that admit new requests still run late. We present \sysname, a scheduler that calibrates how much prefill work each decode step carries using the measured tail of its own iteration latency. The SLO determines how rare a late step must be, and \sysname leaves enough headroom in each iteration to prevent overruns and meet the target decode latency. This headroom slows prefill, so \sysname serves the shortest waiting prompt first. When TTFT deadlines grow with prompt length, the long prompts it delays have the most time to spare. Under disaggregation, it spaces admissions so that no request waits on more slow admission steps than its P99 target allows. On three attention families and varying workloads, \sysname sustains 2.4--2.9$\times$ the SLO goodput of the strongest baseline on Qwen3-8B and DeepSeek-V4-Flash, and at least 4.4$\times$ on DeepSeek-V2-Lite. With prefill and decode disaggregated on eight GPUs, \sysname meets the SLO for more than twice as many requests as state-of-the-art baselines.

0.19

Stable Token-level Scheduling for Serverless LLM Inference

cs.AI ·2026-10-13 ·Hardi Ashishbhai Desai, Balaji N K, Sourav Kanti Addya
similarity 0.68
Abstract · 10 Pages, 7 figures, Conference

Serverless inference is emerging as an efficient deployment model for Large Language Models (LLMs) due to its ability to elastically scale resources, improve GPU utilization through resource sharing, and reduce infrastructure costs. However, existing approaches primarily optimize time to first token (TTFT) while overlooking inter-token latency (ITL), a key determinant of user experience during response generation. We observe that LLM inference comprises a computation-intensive prefill stage and a bandwidth-bound decode stage, where admitting new requests can disrupt ongoing decoding and increase latency. To address this, we propose Token Window Pacing (TWP), a closed-loop scheduling framework that leverages runtime feedback from ITL, queue depth, and workload characteristics to regulate request admission at the token level instead of the batch level. TWP dynamically adjusts a selfregulating token window and incorporates chunk-based prefill to minimize interference from incoming requests. Experiments on realistic serverless workloads show that TWP delivers stable TTFT, significantly reduces latency spikes, lowers P99 tail latency, minimizes ITL variation, and improves throughput by up to 45% over ServerlessLLM and 58% over conventional schedulers. These results demonstrate that feedback-driven tokenlevel scheduling enables stable, high-throughput serverless LLM inference without modifying the underlying model.

0.18