CS Paper Radar

Noctif3R: Feed-Forward Monocular Real-Time SLAM for Photon-Limited Scenes on Embedded Hardware

Mihir Chauhan, Aditya Uday Abhang, Kevin Biju Mathew, Aniket Bera

cs.RO ·submitted 2026-09-17 21:57 UTC · v1

Abstract

Robots carrying out tasks in dark environments need to localize from a single RGB camera, in light so low that the per-pixel signal approaches the sensor's own noise, on a power-constrained onboard computer, in real time. Each of these constraints has matured pipelines, but the intersection does not. Offline low-light reconstruction now recovers structure below -4 dB but is far too slow to run in real time, while the real-time monocular systems a robot can actually carry (DROID-SLAM, DPV-SLAM, etc.) degrade or fail when SNR gets low. We measured how they fail: across the nine lowest darkness levels of our scenes, DROID-SLAM returns a full-length trajectory carrying no information about the camera's motion on all nine, VGGT-SLAM and CUT3R on eight, pi^3 on seven, and DPV-SLAM on four. We present SYS, a monocular pipeline built on a low-light feed-forward pointmap front end with an explicit match gate, which returns three tracked trajectories and no uninformative ones, at the lowest error of any method where it tracks (24-47% of the no-information ceiling against 56-73% for the strongest baseline), and at the narrowest coverage. On a real robot video take in which 86.5% of delivered frames are entirely black, every configuration of ours stops after the lit beginning, while DROID-SLAM and DPV-SLAM each emit a pose for all 1178 frames. Our method contribution is an embedded execution path for the Jetson AGX Orin: running the map, keyframes and backend at 384 pixels with tracking at 256, together with two fixes to the per-frame pose solve, is a replicated Pareto improvement, 1.28x throughput at 0.964x error on one scene and 1.42x at 0.68x on a second, with 47% less peak GPU memory and 29% less energy per pose. We evaluate on a calibrated, bit-exact regenerable noise ladder, on relabelled real-world dark exposures, and on a new dark-room video ladder recorded from a Boston Dynamics Spot robot.

Closest papers

Nearest neighbours by meaning across the whole index.

Pow3R-SLAM: Real-Time RGB-D SLAM with 3D Reconstruction Priors

cs.RO cs.CV ·2026-09-29 ·Christopher Kolios, Ishaan Mehta, Sasa Janjic, Yeganeh Bahoo, Sajad Saeedi
code/data similarity 0.71
Abstract · 9 pages, 4 figures, 4 tables. Project page: https://chriskolios.github.io/Pow3R-SLAM/

We present Pow3R-SLAM, a real-time RGB-D simultaneous localization and mapping (SLAM) system that uses Pow3R for tracking and mapping. Inspired by MASt3R-SLAM, a recent work on monocular SLAM using two-view 3D reconstruction priors, we extend the work to incorporate depth as a prior on the network's prediction, rather than as geometry to fuse. Where traditional RGB-D SLAM systems struggle with sparsity in the depth images, Pow3R utilizes the available depth to give a better-conditioned pointmap, while inferring the depths in empty regions from the two-view photometric, depth, and intrinsic data. Evaluated against MASt3R-SLAM following its protocol on 24 sequences from TUM, 7-Scenes, and Replica, Pow3R-SLAM runs 1.6x faster in wall time, has 15% lower mean trajectory error, a 3.1x lower unscaled error, and produces denser maps, with a 30% lower Chamfer distance. We also introduce a hybrid variant that runs 2.1x faster than MASt3R-SLAM at 25.3 frames per second (FPS), while maintaining improved tracking and mapping accuracy. Against ORB-SLAM3 in RGB-D mode, Pow3R-SLAM is more accurate on TUM, 7-Scenes, and ETH3D-SLAM, and completes every TUM sequence. While Pow3R-SLAM can struggle on a small set of self-similar scenes, its overall performance shows that adding depth as a prior for two-view 3D reconstruction SLAM can be beneficial. A project webpage is available at: https://ChrisKolios.github.io/Pow3R-SLAM , and code will be made open-source upon acceptance.

0.32

4D Reconstruction with Events & RGB

cs.CV ·2026-10-27 ·Dulanga Weerakoon, Darshana Rathnayake, Van Minh Do, Hemanth Sabbella, Kaichen Zhou +5 more
publishedbenchmark similarity 0.68
Abstract · Accepted at NeVi 2026 workshop at the 19th European Conference on Computer Vision (ECCV 2026)

Reconstructing dynamic 3D scenes over time (4D reconstruction) from a single moving camera is central to robotics and AR/VR applications, yet state-of the-art feed-forward methods rely solely on RGB frames and therefore inherit the failure modes of conventional cameras, including motion blur and temporal aliasing under fast or non-uniform camera and object motion. Event cameras report per-pixel brightness changes asynchronously at microsecond resolution, offering a complementary signal that is largely immune to these artifacts, but whether this modality can be incorporated into existing RGB based 4D reconstruction pipelines without a full architectural redesign remains an open question. In this preliminary study, we investigate a minimal extension: we augment Monst3R, an existing RGB-only 4D reconstruction model, with an additional event-camera input branch, leaving the rest of the architecture unchanged. Across 3 benchmark datasets, this simple RGB-event fusion reduces Abs Rel by 3.4% on average relative to the RGB-only Monst3R baseline, and a sensitivity analysis shows that the improvement grows with the magnitude of camera and object motion, with the largest gains observed under high object motion conditions where RGB-only reconstruction degrades most. These early results suggest that even a lightweight, non-invasive fusion of event data can meaningfully improve 4D reconstruction robustness, motivating a more thorough architectural investigation in future work.

0.35

AMB3R-SLAM: Kilometer-scale SLAM with Hierarchical Backend

cs.CV cs.RO ·2026-09-17 ·Hengyi Wang, Lourdes Agapito
code/datahot direction similarity 0.67
Abstract · Project page: https://hengyiwang.github.io/projects/amber-slam

We present AMB3R-SLAM, a real-time monocular SLAM system capable of reconstructing kilometer-scale trajectories over 10k frames on a single consumer-grade GPU. Our model couples a lightweight front-end for low-latency online tracking with a hierarchical backend that progressively enforces local, mid-level, and global consistency. By avoiding bundle adjustment that relies on the static world assumption, our system naturally handles complex dynamic scenes out of the box. Furthermore, we demonstrate that our method can be extended to leverage stereo, RGB-D, and LiDAR as additional inputs. AMB3R-SLAM achieves strong camera tracking performance across 9 datasets, reducing the absolute trajectory error (ATE) of previous state-of-the-art methods on VBR and Oxford Spires by over 70%. With additional LiDAR input, our model further reduces ATE to sub-meter level on KITTI and VBR datasets.

0.62

All-St3R SLAM: Real-time RGB Dynamic SLAM with Pixel-wise Motion Masking

cs.CV cs.RO ·2026-10-12 ·Yewon Kim, Paul Hongsuck Seo, Sang Chul Ahn
publishedcode/data similarity 0.66
Abstract · Accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2026. Project Page: https://yellowon0103.github.i…

SLAM (Simultaneous Localization and Mapping) is a core technology in autonomous systems that enables them to estimate their own position and build a map of unknown environments simultaneously. SLAM systems in dynamic environments are of great practical importance. However, existing dynamic SLAM approaches still have several limitations like over-removal and high computational costs. To address these limitations, we propose a real-time RGB Dynamic SLAM framework that precisely removes moving objects at the pixel level without relying on predefined labels or segmentation models. Our system combines pixel motion predicted by ego-motion using DUSt3R with point tracking from All-Tracker, removing only actually moving pixels by analyzing discrepancies between the two motion sources. Unlike object-level masking methods, our approach eliminates only currently moving regions, allowing temporarily static parts to be utilized for tracking. Operating at approximately 10 FPS, the system achieves real-time performance on standard 30 FPS video streams by subsampling every 3 frames. Relying solely on RGB inputs, this significantly improves upon state-of-the-art dense dynamic SLAM approaches (0.5-3 FPS), presenting a highly practical solution.

0.39

TAPVid-MV: A Benchmark for Tracking Any Point in 3D Across Multiple Views

cs.CV ·2026-09-01 ·Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman, Yi Yang, Ignacio Rocco +7 more
benchmarkcode/data similarity 0.65
Abstract

Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 238 sequences, 1,004 calibrated camera streams, and 74,147 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction. Project page: https://tapvidmv.github.io/

0.46

LightSplat: Real-Time High-Fidelity 3D Gaussian SLAM with Loop Closure

cs.RO cs.CV ·2026-09-07 ·Junze Bao, Ye Gao, Yiming Huang, Xiaolong Yu, Chen Dong +3 more
published similarity 0.64
Abstract · Accepted to 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)

SLAM systems based on 3D Gaussian Splatting (3DGS) have recently demonstrated promising reconstruction accuracy for dense 3D scene representations. However, current 3DGS systems struggle to meet the strict demands of real-world deployments due to severe limitations in operational performance and map adaptability. To this end, we propose LightSplat, a hybrid-representation RGB-D SLAM framework. It synergizes local sparse features for robust and fast tracking with a dual-thread backend that progressively constructs dense Gaussian submaps. Crucially, we enable online loop closure through feature-accelerated 3DGS registration, refining overall map consistency through pose graph optimization. Ultimately, LightSplat achieves the online reconstruction of high-fidelity Gaussian map. Extensive experiments on multiple datasets and real-world robotic platform demonstrate that our method achieves near state-of-the-art reconstruction quality and the capability to accommodate practical camera motions, maintaining an average framerate of 8 FPS. Overall, LightSplat provides an efficient and robust foundation for deploying high-fidelity 3DGS in real-world environments.

0.30

ACROSSVAM3.0: Resource-Bounded 4D Scene Construction and Adaptive Surface Association

cs.AI ·2026-11-09 ·Nan Wu, Hong Yee Hung
similarity 0.63
Abstract

Combining video generation, dynamic reconstruction and monocular SLAM requires consistent coordinates, explicit handling of missing outputs and predictable memory use. We present AcrossVAM3.0, an offline system that converts text, images or monocular RGB video into a versioned point representation. Frozen components run sequentially on one GPU; map corrections update cameras, points and trajectories together. The coordination layer adds no neural parameters. Three fresh input-mode runs completed with a maximum sampled task-process-tree GPU footprint of 17.14 GB. In a frozen 16-scene video suite, every scene yielded a 4D reconstruction and 15 yielded a non-empty SLAM map. Strict cross-window matching reduced local surface error but lost long-range track coverage on TAP-Vid-DAVIS. We therefore developed multi-hypothesis adaptive surface chaining (MHAC), which retains several candidate matches and an explicit missing state. After selection on disjoint development data, MHAC improved Average Jaccard over a position-only baseline by 0.1394 on a frozen ten-video holdout (95% bootstrap interval [0.1074,0.1689]). Across 265 RoboTAP videos, the mean paired gain was 0.0610 ([0.0510,0.0715]), with 215 wins, one tie and 49 losses. These results support resource-bounded scene construction and an external tracking gain under the tested protocol. They do not establish metric scale, semantic identity or high-fidelity novel-view rendering.

0.17

Evaluation of Monocular SLAM Systems on High-Altitude Nadir UAV Footage

cs.RO ·2026-08-19 ·Gašper Spagnolo, Matej Dobrevski, Danijel Skočaj
publishedbenchmark similarity 0.62
Abstract · 6 pages, accepted to ERK 2026

Aerial nadir video combines weak geometric constraints with severe perceptual aliasing, making it a difficult regime for monocular SLAM. We benchmark five monocular SLAM systems on local UAV flights, synthetic city-scale imagery, and long-range aerial sequences. To isolate visual performance, we provide no inertial or GNSS aiding. Performance varies strongly with environment and trajectory scale: MASt3R-SLAM achieves the lowest mean horizontal MAE on the five DJI flights (0.53% of reference path length), whereas no system consistently preserves global trajectory shape on the long GES and ALTO sequences. Overall, DROID-SLAM performs best, averaging 2.88% of reference path length across completed runs. Vertical position remains poor, and large-area trajectories remain highly distorted despite loop-closure capability. Current monocular SLAM methods are by themselves therefore insufficient for reliable visual-only aerial navigation.

0.33