CS Paper Radar

Robust Structureless Monocular Visual Inertial Initialization Exploiting Line Features and Vanishing Points

Junwan Choi, Woongrae Jo, Dong-Uk Seo, Jinwoo Jeon, Hyun Myung

cs.RO cs.CV ·submitted 2026-09-18 01:11 UTC · v1
publishedbenchmarkcode/data

Abstract

Accurate initialization is essential for reliable visual-inertial odometry (VIO), but it is often ill-conditioned under degenerate motions. Existing methods typically require restrictive excitation motions to ensure sufficient observability or rely on computationally expensive 3D structure reconstruction, limiting efficient and practical deployment. To address these limitations, we propose SLIM-init, a structureless monocular VIO initializer that directly exploits geometric constraints from tracked 2D line features without explicit 3D landmark reconstruction. Specifically, SLIM-init leverages line-derived vanishing points (VPs) as translation-invariant orientation cues to provide robust rotation-only constraints under degenerate scenarios such as low-parallax or translation-dominant motions. It further incorporates a line epipolar residual to constrain translation and a line-normal projection residual to improve the conditioning of linear alignment, enhancing the accuracy and robustness of initial state estimation. Extensive experiments on a public benchmark and challenging custom degenerate-motion sequences demonstrate improved accuracy and robustness over state-of-the-art initialization methods. The source code is available at: https://github.com/cjunwan/SLIM-init.

Comment
8 pages, 5 figures, Accepted to IROS 2026

Closest papers

Nearest neighbours by meaning across the whole index.

DAVIO: Dense Monocular-Inertial SLAM with Feed-Forward Initialization and Pose-Conditioned Mapping

cs.RO cs.CV ·2026-09-23 ·Jaafar Mahmoud, Arthur Movsesyan, Mikhail Iumanov, Sergey Kolyubin
similarity 0.65
Abstract

A camera and an IMU are the minimal sensor setup for metric localization and dense mapping, yet classical visual--inertial filters must wait for parallax before they start and then retain only sparse landmarks. Feed-forward geometry models, in contrast, predict dense structure from a few images but provide neither metric scale nor gravity. We present DAVIO, which uses a single multi-view depth model, Depth Anything~3, for both start-up and mapping. At start-up, a five-image window and preintegrated IMU measurements form a feature-free linear system. Its robust, conditioning-checked solution bootstraps a VIO filter through buffered replay. During tracking, the filter's metric poses condition the depth model. Residual scale is corrected only along viewing rays, which preserves the metric camera baselines, and a gravity-preserving submap graph with drift-gated revisits refines the map. On EuRoC, DAVIO starts markedly earlier, reduces the localization error, and maps more accurately than SOTA feed-forward mappers given identical poses. On building-scale ORI sequences, DAVIO is on bar or better than SOTA mappers on the same odometry, and degrades far less when GT poses are replaced by real odometry. We release the code of DAVIO, a real-time dense metric SLAM system, to the community.

0.17

Reduced Order Observers for Monocular Visual Inertial Odometry

eess.SY ·2026-09-22 ·Amel Abi, Mouaad Boughellaba, Miaomiao Wang, Abdelhamid Tayebi
similarity 0.65
Abstract

This work develops a reduced order observer framework of monocular visual-inertial odometry (VIO). The key idea consists in considering the gravity vector in the body-frame as an additional state and constructing an appropriate output that relates the monocular bearing measurements and their time derivatives to the body-frame velocity. This eliminates the need for the estimation of the landmark positions, leading to a six-dimensional linear time-varying (LTV) observer for the body-frame velocity and gravity, endowed with uniform global exponential stability guarantees. These estimates are subsequently used to recover the orientation almost globally, up to an unknown constant yaw offset, and the position up to an unknown constant translation. The mixed-bearing framework is further extended to account for the inertial measurement unit (IMU) biases, yielding a twelve-dimensional LTV observer endowed with local exponential stability guarantees. Numerical simulations are provided to illustrate the effectiveness of the proposed observers.

0.15

KLTNet: Learning Sparse Feature Tracking for Robust and Accurate Monocular Visual-Inertial Odometry

cs.CV ·2026-08-25 ·Renbiao Jin, Danping Zou, Wenxian Yu
similarity 0.65
Abstract

Many feature-based visual-inertial odometry (VIO) systems rely on sparse feature tracking, whose accuracy and robustness directly affect state estimation. Classical KLT trackers rely primarily on local image patches and can become unreliable under rapid motion or in low-texture environments. We propose KLTNet, a lightweight learning-based, plug-and-play sparse feature tracker designed to replace classical KLT trackers in KLT-based VIO front ends. KLTNet follows a coarse-to-fine, dense-to-sparse architecture that combines low-resolution dense optical flow for robust global motion initialization with triplet-patch refinement for accurate and temporally consistent tracking. A fixed reference patch provides a stable anchor throughout each feature track and helps reduce accumulated tracking drift. In addition, KLTNet predicts anisotropic confidence weights supervised through differentiable multi-view triangulation, which can be used as observation weights in compatible VIO estimators. Experiments with VINS-Mono and OpenVINS on public benchmarks and a self-collected low-texture dataset demonstrate improved tracking and odometry accuracy over classical KLT, while maintaining real-time performance on an embedded platform.

0.18

NIF-VIO: Visual--Inertial Odometry Across Inertial and Non-Inertial Reference Frames

cs.RO ·2026-11-10 ·Zichao Shu, Lijun Li, Zhuochen Li, Zetao Chen, Jianyu Wang
similarity 0.65
Abstract

Conventional visual--inertial odometry (VIO) assumes that observations from cameras and an inertial measurement unit (IMU) are jointly consistent in an inertial reference frame. However, this assumption breaks down under non-inertial conditions. Inside accelerating or rotating carriers, visual observations of the interior reflect carrier-relative motion, while IMU measurements contain additional carrier-induced components, which can compromise conventional fusion. We therefore present NIF-VIO for localization relative to the local environment across inertial and non-inertial reference frames. It adapts visual--inertial fusion based on measurement consistency. As inertial conditions change, early constraint isolation is combined with local reoptimization to limit error propagation before inconsistency confirmation and repair the affected local geometry. Under non-inertial conditions, a compact model with temporally shared parameters is introduced to account for carrier motion while preserving inertial information that complements visual constraints. Experiments on public benchmarks and a self-collected dataset demonstrate that NIF-VIO achieves competitive performance under inertial conditions and improved localization accuracy and availability under non-inertial conditions.

0.24

RESPLE2: Inertial-Informed Recursive Non-Uniform Spline Estimation for Multi-Sensor Odometry with Global Refinement

cs.RO ·2026-10-27 ·Ziyu Cao, William Talbot, Song Li, Pakpong Chirarattananon, Fredrik Gustafsson +2 more
code/data similarity 0.63
Abstract · 18 pages

We present RESPLE2, a recursive multi-sensor state estimation framework using non-uniform B-splines for 6-DoF motion representation. By exploiting the knot-clamping boundary property, we propose a theoretically grounded mechanism for exact control-point prediction directly informed by inertial kinematics along the trajectory, with knot placement adapted to motion and measurement availability. Within an iterated extended Kalman filter, we perform this prediction using a subset of inertial measurements. A subsequent reset step preserves trajectory consistency as the knots extend. The update step further incorporates heterogeneous sensor measurements at their native timestamps through continuous-time observation models, supporting flexible combinations of LiDARs, cameras, inertial measurement units, and leg kinematics. We further develop a lightweight global optimization module that directly refines non-uniform B-spline control points by incorporating loop-closure constraints derived from LiDAR-visual cues. We conduct extensive evaluations on public and experimental datasets across handheld, tracked, legged, and hybrid aerial-legged platforms, covering highly dynamic maneuvers with extreme accelerations. Compared with state-of-the-art multi-sensor odometry systems, RESPLE2 achieves competitive or superior estimation accuracy and robustness in the corresponding sensor configurations, particularly under aggressive motion, while maintaining real-time operation. We publicly release our code and experimental datasets at https://github.com/ASIG-X/RESPLE2.

0.40

Initialization-Free Bundle Adjustment Revisited: A Controlled Experimental Study

cs.CV ·2026-08-18 ·Simon Weber, Mateo de Mayo, Je Hyeong Hong, Carl Olsson, Daniel Cremers +1 more
benchmarkcode/data similarity 0.63
Abstract

Initialization-free bundle adjustment (InitFree BA) aims to recover camera poses and scene structure directly from image observations, avoiding the geometric initialization stages of conventional structure-from-motion pipelines. Recent methods based on Object-Space Error (OSE) formulations and Variable Projection (VarPro) show encouraging optimization behavior from random camera configurations. However, existing evaluations primarily measure optimization success, leaving unclear whether a low OSE objective yields a valid metric 3D reconstruction. We revisit InitFree BA experimentally through a unified evaluation framework combining a C++ implementation of existing OSE formulations with a Blender-based dataset generator providing exact ground truth and controlled camera configurations and observation densities. Our experiments reveal a previously overlooked optimization--reconstruction gap: projective solutions with similarly low OSE values can lead to substantially different Euclidean reconstructions after metric upgrade. We identify initialization priors, landmark observation density, and metric-upgrade stability as key factors governing reconstruction success. Overall, our results suggest that the main challenge of InitFree BA is not merely minimizing OSE objectives, but obtaining projective reconstructions that admit reliable metric upgrade. We believe that the proposed benchmark, implementation, and analysis establish stronger experimental foundations for future research on initialization-free bundle adjustment, a problem largely unexplored within the computer vision community. Project page is available at https://github.com/simonwebertum/InitFreeBA.git.

0.41

Beyond Control Points: Arcsecond Relative-Motion Estimation of Vision Measurement Platforms With Incomplete or Absent Control Fields

cs.CV ·2026-08-14 ·Meng Lian, Jian Wang, Shuixin Pan, Haibo Liu, Yueqiang Zhang +1 more
similarity 0.62
Abstract · 13 pages, 14 figures. Submitted to IEEE Transactions on Image Processing

Long-range vision-based deformation monitoring is highly sensitive to motion of the camera platform. Absolute-pose differencing typically relies on dedicated control data and propagates two independent pose errors into the relative-motion estimate. We develop a control-adaptive differential framework that estimates inter-frame platform motion directly from image displacements and known 3D points. With no dedicated control point, the framework recovers platform rotation from measurement-point observations. One surveyed control point enables prior-constrained translation recovery, while two nonparallel control rays recover full 3D translation. The framework requires neither nonlinear optimization nor an initial pose estimate. Excluding control data from the rotation stage makes the rotation estimate exactly immune to contamination confined to the control field. The inherited differential formulation also cancels translational extrinsic errors exactly. We derive the rotation observability condition, a leakage bound for unmodeled translation and nonrigid point motion, and the single-point axial-prior bias law. Under 0.5-pixel image noise, attitude changes of up to 30~arcmin, and 3D point perturbations of up to 2~mm, the multi-camera estimator achieves a rotation RMSE of 2.97~arcsec and an average runtime of 0.46~ms. With one surveyed control point, its prior-constrained translation RMSE is 1.19~mm. In a bridge experiment without a stable control field, the median coordinate-wise displacement RMSE relative to total-station measurements is 0.85~mm. The estimator also maintains zero divergence under the tested 3D coordinate perturbations on public RGB-D and stereo sequences. These results establish state-of-the-art accuracy, calibration robustness, and computational efficiency among the evaluated methods.

0.42

EgoMo3R: Joint Egocentric Motion and Scene Reconstruction

cs.CV cs.AI ·2026-11-01 ·Chaitanya Patel, Yusuke Kato, Rin Takahira, Kazuki Kozuka, Juan Carlos Niebles +1 more
publishedcode/data similarity 0.62
Abstract · NeurIPS 2026. Project Page: https://chaitanya100100.github.io/EgoMo3R/

Understanding holistic 3D human motion and the surrounding environment from egocentric video is fundamental for applications in AR/VR and robotics. Although these tasks are inherently coupled, existing methods treat them separately. In particular, egocentric motion reconstruction methods typically assume access to metric, gravity-aligned camera trajectories from specialized inertial sensors. Recovering such trajectories from monocular egocentric video remains a significant challenge due to rapid head movements and motion blur. We present EgoMo3R, a joint optimization framework that simultaneously reconstructs 3D human motion and scene geometry from casual egocentric video. It leverages the robustness of low-level visuo-geometric primitives, including monocular depth, optical flow, and point tracks, integrated with a diffusion-based human motion prior via first-order optimization. We propose an alternating optimization scheme that establishes a synergistic feedback loop: scene reconstruction provides physical grounding and trajectory conditioning for the motion prior, while the motion prior regularizes the camera trajectory and anchors the scene in a metric, gravity-aligned world frame. We evaluate EgoMo3R on the highly dynamic sequences of the EgoExo4D and Nymeria datasets and show that it outperforms specialized baselines in both 3D scene reconstruction and egocentric motion estimation.

0.31