CS Paper Radar

ZYT-World: A Real-Time Controllable World Model for Closed-Loop Autonomous-Driving Simulation

Boni Hu, Xiong Wei, Haoming Huang, Yong Huang, Chenbo Wang, Yi Yang, Jiancheng Wang, Ruicheng Zhu, Zhimin Yang, Guanglai Liu, Qiaowan Jin, Dongzhuo Wang, Haiwei Kuang, Jiajun Fan, Yue Wu, Jiaxin Wei, Hao Sun, Feihong Yan, Yuyao Zhou, Wei Bi, Kaixuan Wang, Zichao Guo, Xiaozhi Chen

cs.CV ·submitted 2026-09-18 12:49 UTC · v2

Abstract

Generative world models offer controllable and repeatable closed-loop simulation for end-to-end and vision-language-action driving policies, but production deployment exposes three unresolved requirements: faithfully reproducing a mixed fisheye-pinhole rig at native resolutions; reconciling causal, per-timestep interaction with long-horizon stability and low latency; and preserving scene identity when a location is revisited. We present ZYT-World, a single architecture that natively generates four fisheye views with field of view > 180° and three pinhole views. Projection-specific Plucker adapters encode camera geometry, ego-motion adaptive layer normalization provides global motion control, and a lightweight pixel-aligned layout conditions traffic participants and signals through instance-level boxes, headings and colors. Heterogeneous training combines full-rig geometric coverage with high-resolution detail. Teacher forcing, causal consistency distillation, self-rollout distribution matching distillation, and RigCritic transform a 40-step bidirectional teacher into a one-step, per-latent streaming generator, with RigCritic evaluating the seven-view rig jointly. A 19M-parameter variational autoencoder decoder (TinyVAE), W8A8 quantization, and our inference engine reduce decoding, backbone, and incremental-execution costs, respectively. Finally, cross-trajectory pairs derived from real captures train a plug-in implicit-memory module that preserves place-specific evidence. On the internal multi-view test set, the one-step model retains more than 90% of the teacher's PSNR and SSIM, while FID, FVD, and LPIPS stay within 11% of the teacher. Under the generator-only timing in Figure 2, it is 107.7 times faster than the 40-step bidirectional teacher. TinyVAE decodes 59.8 times faster than Wan. 30s rollouts and cross-trajectory revisits show the intended long-horizon and memory behavior.

Comment
v2: updated author list. Technical Report. Videos and additional results are available at zyt-aim.github.io/ZYT-World

Closest papers

Nearest neighbours by meaning across the whole index.

Xiaomi Auto World Model 2.0: Causal World Models for Real-World Driving and Embodied Intelligence

cs.AI cs.LG ·2026-11-01 ·Zhenxin Zhu, Zhijian Huang, Cheng Chi, Yuru Wang, Jianhua Wu +18 more
code/data similarity 0.68
Abstract · 40 pages, 20 figures. Project page: https://xiaomiautoworldmodel.github.io/CausalWorldModel/

We present Xiaomi Auto World Model 2.0, a unified streaming causal world model for Physical AI. It models and generates causal physical evolution in the real world, and unifies heterogeneous conditioning inputs for view-consistent generation. The architecture integrates View-Temporal Attention (VTA) to capture cross-view spatial dependencies and temporal dynamics, together with Multi-view Rotary Position Encoding (RoPE) to encode positional relationships across views and time. WorldRec 2.0 reconstructs static and dynamic 3D Gaussians from multi-view, multi-temporal observations in a single forward pass and uses their renderings as explicit scene context to preserve geometry and appearance during long-horizon generation. Conditioning inputs are fused through VAE latent concatenation in a shared representation space. We incorporate Gated Linear Attention (GLA) into the temporal layers of VTA for efficient streaming inference, reducing computation and KV-cache memory during multi-view rollouts. A physical-interaction data pipeline covers diverse interactions and long-tailed events. From Pre-train onward, these data are combined with large-scale videos and heterogeneous visual modalities to learn visual, geometric, and dynamic priors. During Mid-train, training across diverse view configurations further improves the model's ability to capture how actions and object states shape subsequent scene evolution. After distillation-based Post-train, we apply the model to closed-loop simulation, closed-loop training, and World Action Model (WAM) applications. These applications generate physically consistent future states and support world-state prediction, policy learning, and action generation for Physical AI.

0.23

Fisheye-VLA: Decoupling Coverage and Acuity for Manipulation with a Single Fisheye Camera

cs.RO ·2026-09-22 ·Ziang Ren, Zike Yan, Raymond Zhang, Xuguo He, Zhongyu Li
similarity 0.66
Abstract

Manipulation requires both broad scene awareness and detailed local feedback, yet conventional camera rigs provide them through separate front and wrist cameras. We present Fisheye-VLA, a visual interface that brings these capabilities together using a single passive fisheye. A global view preserves the workspace, while local perspective crops direct detail toward the interaction. The key design question is where this local visual budget should go. We answer it through a controlled re-rendering study, comparing alternative crop directions on the same recorded observations. The study finds that end-effector-centered views capture most of the estimated benefit of a much larger candidate pool, motivating a compact allocation around both hands. Our interface uses calibrated end-effector projection and motion lead to track the crops, while a shared ray encoding preserves their spatial meaning as they move. Integrated with a pretrained VLA, it achieves 84% and 82% success in the two expanded tabletop regions, where some target placements extend beyond the front-camera coverage, and supports shelf and conveyor manipulation. Ablations show that local crops and their viewing directions become more important in the larger workspace regions. The results demonstrate that a single fisheye can support these manipulation tasks without physical wrist cameras.

0.14

PrimeSim: A Generalist World Model Simulator from Large-Scale Cross-Embodiment Demonstrations

cs.RO ·2026-11-03 ·Travis Davies, Wentao Ma, Lihao Guo, Tengfei Ma, Xiaowen Chang +8 more
code/data similarity 0.66
Abstract

A robot world model that serves as a simulator must do more than generate plausible videos: it must faithfully follow commanded actions, maintain consistency across camera views, and sustain coherent long-horizon rollouts. We present PrimeSim, an action-conditioned, multiview world model simulator that addresses these challenges through progressive midtraining and posttraining. Starting from a pretrained video generator, we midtrain on 30,110 hours of robot demonstrations spanning 22 platforms. To improve action following, we introduce a unified cross-embodiment action representation and frame-aligned dual-path conditioning to strengthen action-frame correspondence. To maintain multiview consistency, we develop view-aware interleaved attention with explicit camera identities, enabling cross-view information exchange while preserving view-specific representations. We further introduce a fast-video, slow-memory posttraining framework that transforms the bidirectional video generator into an efficient autoregressive simulator. By combining fast causal generation, self-rollout training, and hierarchical temporal memory, PrimeSim mitigates error accumulation from self-generated histories and supports coherent long-horizon simulation. PrimeSim runs at 10.1 FPS, remains stable over long-horizon rollouts on rigid and deformable manipulation tasks, and transfers to held-out platforms within 100 to 200 gradient steps where the pretrained backbone does not. Against five open-source action-conditioned world models it leads four of the five WorldSimProbe suites and posts the best overall EWMBench score, while fine-grained local calibration still trails the field; its rollouts are faithful enough to support GRPO-based policy optimization. We release the model weights, inference code, and training code.

0.24

Code World Model 2.0: Towards Infinite Controllable Video Generation

cs.CV ·2026-11-17 ·Ruoyu Wang, Hao Zhong, Yanming Yang, Jiahao Tian, Lin Liu +6 more
code/datapopular code similarity 0.65
Abstract · Project Page: https://www.inclusion-ai.org/CodeWorldModel/

Visual proxies decouple explicit world-state simulation from photorealistic video synthesis, offering a controllable interface for both offline clip creation and real-time interactive streaming. Yet a practical renderer must address two challenges. Upstream proxies vary from coarse layouts to fine articulated geometry depending on the interaction, and streaming inference must operate in a few causal steps without accumulating drift across self-generated history. We present Invoker-Render, pairing a bidirectional creation model with a causal four-step streaming model under a shared conditioning interface over structural proxies, an appearance reference, and language. Trained on an aligned approximately 200-hour multi-granularity corpus, Invoker-Render honors fine geometric constraints when supplied while synthesizing plausible local motion under coarse proxies, enabling runtime selection of input detail. To bridge bidirectional creation and real-time streaming without compounding step compression and rollout drift, we introduce Progressive Forcing (ProForcing). ProForcing first trains a causal predictor and distills it into a four-step renderer using histories derived from training videos. Training then shifts to continuous self-generated rollouts. A pipelined serving stack supports efficient streaming inference. Experiments show versatile control across proxy families, granularities, and camera paths, consistent gains over recent streaming baselines, and stable 30-minute racing rollouts that preserve scene and subject appearance.

0.58

Puffin-World: Scaling a Unified Multimodal Model with Native 3D World States

cs.CV ·2026-09-03 ·Kang Liao, Yihang Luo, Xiao-Ming Wu, Linyi Jin, Size Wu +5 more
code/data similarity 0.65
Abstract · Project Page: https://kangliao929.github.io/projects/puffin-world/

We propose Puffin-World, a unified multimodal architecture that integrates physical understanding, spatial simulation, and 3D world generation and reconstruction without relying on external offline modules. To reliably construct and interact with 3D worlds, our framework jointly models three native world states: physics (gravity field and latitude), geometry (depth), and appearance (image), together with a unified Omni-Camera representation that supports diverse tasks and flexible motions. Beyond modeling these states, we introduce a strategy for propagating physical dynamics across future frames. By grounding absolute camera properties in the real world, Puffin-World enables physically consistent and visually stable world generation. We further couple appearance and geometry within a single generative process, jointly synthesizing each future view and reconstructing its underlying geometry. This unified paradigm enables interleaved closed-loop applications requiring synergy across multiple tasks, including mimic and self-calibrated world exploration. To scale Puffin-World to complex scenarios, we construct Puffin-16M, comprising 15 million vision-language-camera triplets and 1 million trajectories featuring various and challenging motions. To foster further research in this area, we released the code, models, and datasets.

0.50

WorldRover: A Scalable Synthetic Video Data Engine for World Exploration with Rich Annotations

cs.CV cs.GR ·2026-08-16 ·Xiaojie Xu, Zhengyuan Lin, Runyi Li, Yihao Liu, Kaipeng Zhang +1 more
similarity 0.65
Abstract · update code and data links

Learning to generate or reconstruct explorable worlds requires video paired with more than RGB: camera motion, scene geometry, temporal correspondence and, for interactive models, control signals. Real capture can provide some of these signals, but dense geometry and long-range correspondence usually rely on estimation or specialised instrumentation. Rendering provides these quantities directly, yet existing synthetic resources rarely combine them on the same frames while also supporting controlled changes of viewpoint and appearance. We introduce WorldRover, a data engine for generating richly annotated, long-range explorations of artist-built environments. At its core, WorldRover-Engine is an Unreal Engine pipeline that executes and offline-renders minute-scale routes while preserving their full trajectories and scene geometry. The same exploration can be replayed from first-person, third-person, and 360 panoramic cameras under different environmental states. Using WorldRover-Engine, we construct WorldRover-10M, whose sequences pair RGB with metric depth, camera trajectories, and trajectory-derived action signals throughout each exploration. Third-person subsets additionally provide dense optical flow, long-range 2D/3D point tracks with visibility, and a character trajectory distinct from the camera trajectory. The engine can render a traversal from first-person, third-person and 360 panoramic viewpoints, under different environmental states or with a neutral white material, while preserving the route and scene geometry. WorldRover therefore turns long-horizon world exploration into a scalable data-generation problem, providing supervision for models that must build, maintain, and revisit coherent representations of an explorable world.

0.34

WorldCrafter: Consistent Video World Model with Implicit 3D-aware Memory

cs.CV cs.AIcs.GR ·2026-09-21 ·Wangbo Yu, Kunhao Liu, Wenbo Hu, Shenghai Yuan, Chaoran Feng +6 more
highly cited similarity 0.65
Abstract · Project webpage: https://drexubery.github.io/WorldCrafter

Video world models enable interactive exploration of dynamic environments, yet struggle to respect prior observations over long horizons and across viewpoints. We present WorldCrafter, a video world model that learns a camera-queryable implicit 3D-aware memory for this purpose. The key insight is to let the requested viewpoint shape how multi-view evidence is compressed into the video generator's limited token budget. Trained jointly with the video generator, a memory encoder and pose-conditioned readout module integrate historical observations into a fixed set of target view-specific tokens before denoising, without explicit depth-based correspondences. By combining this memory with recent temporal context and few-step distillation, WorldCrafter enables streaming scene exploration from a single input image or text prompt. Experiments across static and dynamic scenes show substantial gains in long-horizon consistency and camera-control accuracy while preserving visual quality during minute-scale exploration.

0.47

StreamRig: Exploiting Intra-Rig Geometry for Streaming Multi-Camera Odometry

cs.CV cs.RO ·2026-09-30 ·Yufei Wei, Shuhao Ye, Qi Wang, Xin Zheng, Qing Huang +2 more
code/data similarity 0.65
Abstract · 8 pages, 4 figures, 5 tables. Code: https://github.com/WeiYuFei0217/StreamRig

Mobile robots and vehicles carry synchronized multi-camera rigs, yet many streaming 3D foundation models are designed for monocular input, leaving efficient use of rig geometry a challenge. We present StreamRig, a freeze-and-stream framework that builds causal streaming odometry for calibrated rigs on a frozen multi-view 3D foundation model. The frozen front-end jointly perceives the synchronized views using rig calibration. A Rig-Resampler compresses their features, a CausalBridge applies causal attention with a key-value cache, and a lightweight head regresses rig poses. A periodic re-anchoring protocol supports stable pose estimation over long sequences. Only these modules are trained, 74.6M parameters in total, with relative poses as the sole supervision. Our two-stage training strategy combines group relocalization pretraining with causal rig training to transfer the geometric priors of the frozen front-end and the alignment ability of the pretrained modules to streaming odometry. We evaluate on NCLT, TartanGround, KITTI-360, and our self-collected humanoid-robot dataset ZJH, where training uses only simulation and real-world evaluation is zero-shot. Across all four datasets, StreamRig achieves lower translation and rotation drift than the evaluated non-oracle monocular streaming and rig-aware offline models, while maintaining low inference cost. Ablations and controlled camera-count experiments identify the sources of these gains. We further examine how longer training windows affect inference over longer horizons. Code has been released at https://github.com/WeiYuFei0217/StreamRig.

0.34