CS Paper Radar

Stagewise Anomaly Detection for E-Transaxle Quality Monitoring Using Wavelet and STFT Features

Mohammad N. Bisheh, Rajesh Gupta, Qian Wang, Mohammad Babakmehr, Colin Brady, Parinaz Farajiparvar, Saurabh Singh, Kamran Payanabar

eess.SP cs.LGstat.OT ·submitted 2026-08-27 00:28 UTC · v1

Abstract

This paper presents two interpretable machine-learning frameworks for quality screening of e-transaxle assemblies in electric vehicles: a Stagewise Wavelet Isolation Forest (SWIF) framework and a short-time Fourier transform (STFT)-based diagnostic framework. High-dimensional vibration signals acquired from front and back accelerometers are analyzed across multiple operating stages to capture stage-dependent vibration behavior. In the SWIF framework, signals are decomposed using a five-level Daubechies-4 discrete wavelet transform, and blockwise mean-squared coefficients are extracted from the selected wavelet detail level to obtain compact multiscale features. In the STFT-based framework, dominant-frequency trends are extracted from time-frequency representations and summarized through regression coefficients with respect to instantaneous motor speed. Anomaly detection models are trained using accepted production units under the assumption that only a small fraction of accepted assemblies contain latent defects, and their performance is evaluated using road-tested units with validated quality outcomes. Experiments on production and road-tested e-transaxle units show that both approaches provide interpretable diagnostic information, while SWIF achieves the most favorable balance between defect detection and false-positive control. Compared with the STFT-based method and alternative anomaly detectors, SWIF combined with Isolation Forest yields lower anomaly rates within the Accept population while identifying high-risk units from the Reject population. The stagewise structure further localizes anomalous behavior to specific operating conditions, supporting root-cause analysis and targeted process improvement.

Closest papers

Nearest neighbours by meaning across the whole index.

A Harmonic-Regression ARMA model for rotating machinery dynamics identification and fault detection under varying conditions

eess.SP ·2026-09-23 ·Dimitrios M. Bourdalos, John S. Sakellariou, Spilios D. Fassois
published similarity 0.57
Abstract · Accepted for publication in the Proceedings of the International Conference on Noise and Vibration Engineering (ISMA 2026), Leuven, Belgium,…

Fault detection in rotating machinery under varying operating conditions remains a challenging problem. Existing approaches are mainly based either on non-parametric vibration signal representations, parametric deep learning models, or on parametric ARMA-type models. While deep learning approaches often lack transparency and require large training datasets, ARMA-type models rely on the assumption of a purely rational spectrum, which can be restrictive for rotating machinery vibration signals exhibiting mixed spectral characteristics. To address these limitations, a novel Harmonic Regression ARMA (HR-ARMA) model is presented for rotating machinery dynamics identification, which combines an explicit harmonic regression part for representing the dominant deterministic cyclical components with an ARMA part for the remaining broadband stochastic dynamics. Based on this model and within a Multiple Model framework, fault detection is achieved under varying operating conditions. The HR-ARMA modelling performance is validated through simulation and experimental studies on a single-stage gearbox, demonstrating accurate representation of both cyclical and broadband dynamics, improved parsimony and significantly higher fault detection performance compared with conventional ARMA models, achieving at least 98% True Positive Rate at 5% False Positive Rate in the experimental study.

0.39

Lightweight Time-Frequency Vibration Sensing for Consumer Device Condition Monitoring

eess.SP cs.LG ·2026-10-09 ·Po-Heng Chou, Jen-Yu Chiu, Chun-Yu Yeh, Wei-Lung Mao, Walid Saad
benchmark similarity 0.56
Abstract · 6 pages, 3 figures, and 4 tables. Submitted to the 2027 IEEE International Conference on Consumer Electronics (ICCE 2027)

Consumer rotating devices, including washing machines, air conditioners, electric fans, robotic vacuum cleaners, and home fitness equipment, increasingly rely on vibration sensing for intelligent condition monitoring and predictive maintenance. Ensuring reliable operation in these resource-constrained appliances requires efficient, lightweight artificial intelligence (AI) solutions capable of processing non-stationary signals under real-world operational interference. This paper proposes a lightweight AI-assisted vibration sensing framework that employs continuous wavelet transform (CWT) and Hilbert-Huang transform (HHT) to convert one-dimensional (1-D) vibration time-series signals into two-dimensional (2-D) time-frequency representations. These representations are subsequently analyzed using lightweight deep learning architectures, specifically MobileNetV3-Small, ConvNeXt-Tiny, and the You Only Look Once version 11 classification model (YOLOv11-cls). Public bearing benchmark datasets, including Case Western Reserve University (CWRU), Paderborn University (PU), and Intelligent Maintenance Systems (IMS), are utilized as representative rotating components to investigate model generalization. The proposed framework is designed with eventual embedded deployment in consumer electronics in mind. Experimental results demonstrate that CWT combined with YOLOv11-cls achieves high diagnostic accuracy, while MobileNetV3-Small provides an attractive low-latency alternative for computationally constrained edge platforms. Conventional random splitting is also compared with dataset-specific structured isolation. The results highlight the importance of avoiding data leakage and quantify tradeoffs in classification accuracy, parameter count, floating-point operations (FLOPs), model footprint, preprocessing cost, and central processing unit (CPU) inference latency.

0.23

A Hybrid Anomaly Detection Method for Electric Vehicle Identification from Smart Meter Recordings

cs.LG cs.AI ·2026-11-01 ·Ali Babalhavaeji, Hui Song, Mohammadreza Radmanesh, Mahdi Jalili
similarity 0.54
Abstract

In recent years, electric vehicles (EVs) have attracted much attention due to their potential to decarbonize the transport system. EV charging imposes challenges on power grids, such as load imbalance and voltage instability. Therefore, electricity distributors need to identify which users have an EV. Smart meter recordings can be effectively used for this purpose. The major issue associated with such data is the imbalance problem, where the majority of the data belongs to users without EVs. The existing methods for EV identification from smart meter recordings have framed it as a classification task. In this paper, we frame the problem as an unsupervised problem and propose a hybrid anomaly detection method that combines the power of prediction-based and reconstruction-based anomaly detection methods. The proposed model considers temporal and stochastic representation information of smart meter time series via prediction-based and reconstruction-based components, respectively. The performance of the proposed model is compared with state-of-the-art supervised and unsupervised methods. Its superiority is verified on real-world data.

0.26

Robust Fault Detection in Mechanical Multimodal Time Series via Self-Supervised Cross-Modal Reconstruction

cs.LG stat.AP ·2026-09-14 ·Magnus Munk Jensen, Dorte Hammershøi, Rafał Wiśniewski, Olga Fink
similarity 0.53
Abstract · Submitted to Reliability Engineering & System Safety

Fault detection is essential in industrial systems, enabling early identification of abnormal behaviour and improving safety, reliability, and operational efficiency. Modern systems increasingly rely on heterogeneous sensing modalities that capture complementary aspects of the underlying physical process. However, existing data-driven anomaly detection methods often process each modality independently or use simple feature-level fusion, limiting their ability to exploit cross-modal relationships that characterize normal system behaviour. Their performance also commonly assumes similar training and deployment distributions, whereas real-world operation is affected by changing operating conditions, environmental influences, and system degradation that induce distribution shifts and reduce detection performance, especially in unseen regimes. In this work, we propose a multimodal anomaly detection framework based on cross-modal reconstruction of heterogeneous time-series sensor data. Rather than modeling each modality independently, the framework learns system dynamics by reconstructing each modality from the others, thereby exploiting complementary information across modalities. This integrates information across sensing channels without requiring explicit temporal alignment or identical sampling rates, while improving robustness to sensor noise, missing measurements, and modality-specific disturbances. To address distribution shifts during real-world deployment, anomalies are identified using cross-modal reconstruction error and an adaptive test-time thresholding mechanism that adjusts to changing operating conditions. Experiments on three industrial case studies show strong fault detection performance and substantially improved robustness under out-of-distribution conditions, with the largest gains observed in the most challenging operating regimes.

0.23

A Time-Frequency-Condition Multimodal Fusion Foundation Model for Universal Rotating-Machinery Fault Diagnosis under Multi-Element Heterogeneous Scenarios

cs.CL cs.AI ·2026-11-11 ·Xinyu Zou, Jian Ma, Liang Ma, Chen Lu, Tao Peng +1 more
similarity 0.52
Abstract

Intelligent fault diagnosis models are typically developed for a single machine under a specific set of operating conditions, such that each new machine or condition requires retraining from scratch. This one-machine-one-model paradigm scales poorly. Although transfer learning and domain generalization can reduce the labeling burden, they primarily seek domain-invariant commonality, potentially discarding machine-specific characteristics that are critical for diagnosis. This paper proposes TFC-MMFD, a time-frequency-condition multimodal fusion foundation model for rotating-machinery fault diagnosis under multi-element heterogeneous scenarios. Statistical indicators, time-frequency images, vibration sequences, and textual machine and condition descriptions are tokenized into a unified language-like space, allowing inputs of different physical origin to be represented as a single sequence. A LLaMA backbone, together with cross-modal bidirectional attention and a Q-Former, then distills this sequence into fault-mode queries. Diagnosis is performed by matching these queries against natural-language fault-mode anchors rather than fixed class indices, while regression-adversarial condition disentanglement and condition-conditioned masked pre-training improve robustness to changing conditions. Across four progressive tasks on ten public bearing datasets spanning diverse bearing types, speeds, and loads, TFC-MMFD attains 99.40% accuracy and 99.16% macro-F1, maintains over 80% accuracy on most interpolated unseen conditions without adaptation, and improves from 20.26% to 95.63% accuracy on an unseen machine with only five labeled samples per class. It outperforms the strongest of eight domain-generalization baselines by 10.57 percentage points and compares favorably with a recent bearing foundation model while using less than half of its fine-tuning data.

0.15

Spectrogram-Based CNN Autoencoder for One-Class Anomaly Detection in Machining Vibration Signals

cs.LG ·2026-11-07 ·Sebastian Zeleny, Christian Gawron
published similarity 0.52
Abstract · 29 pages, 14 figures

This work presents a one-class anomaly detection framework for vibration-based condition monitoring in machining processes using a convolutional neural network autoencoder. Three-axis vibration signals acquired during industrial broaching are transformed into time--frequency spectrograms and combined into a compact three-channel representation, enabling convolutional feature learning on multivariate time-series data. The autoencoder is trained exclusively on normal process data and detects anomalous strokes based on reconstruction errors. Labeled validation data are used for threshold calibration and an independent test set is reserved for final performance evaluation. To improve sensitivity to short-lived process instabilities such as chatter, a localized residual-based metric termed Segmented Vertical Error (SVE) is introduced. Experimental results on approximately 10{,}000 broaching strokes show a clear separation between normal and anomalous process conditions under strong class imbalance. The processing pipeline is additionally evaluated on an external public turning dataset as a proof of concept, indicating preliminary applicability beyond the original broaching setup. The results suggest that spectrogram-based autoencoder models can provide a practical and scalable basis for one-class anomaly detection in industrial vibration monitoring.

0.34

Motor compound fault diagnosis using an attention-based cross-talk architecture

cs.AI cs.LG ·2026-10-19 ·Wonjun Yi, Wonho Jung, Junho Kim, Rismaya Kumar Mishra, Yong-Hwa Park
similarity 0.52
Abstract · Submitted to ICSV33

As physical AI increasingly relies on sensing to understand physical systems, reliable condition monitoring of industrial machinery has become more important. Motors are ubiquitous in industrial systems, and increasing system complexity raises the likelihood of simultaneous faults. Accordingly, compound fault diagnosis that identifies multiple fault components and their severities is increasingly required. Because different fault components jointly affect the same vibration signal, their severity classification can be formulated as related tasks, making multi-task learning (MTL) suitable for exploiting shared information. However, conventional shared-trunk architectures force tasks to share a common representation, potentially causing negative transfer because fault components are characterized by different time-frequency regions. To address this issue, this study proposes a Residual Neural Dimension Reductor with Time-Frequency Channel Attention (RNDR-TFCA), an attention-enhanced cross-talk architecture for multi-output compound fault diagnosis. RNDR-TFCA preserves task-specific feature extractors while selectively exchanging information across tasks. Time-frequency attention emphasizes informative intra-task regions, while channel attention enhances useful inter-task information after nonlinear feature fusion. Experiments on a rotor-bearing system with inner-race fault, outer-race fault, misalignment, and unbalance showed that RNDR-TFCA achieved a macro F1 score of 0.898, outperforming single-task, multi-class, shared-trunk, and cross-talk baselines. Ablation experiments confirmed the benefit of jointly applying both attention mechanisms. RNDR-TFCA required 713 K parameters and 170.42 MMACs, only slightly higher than RNDR. Channel-expanded baselines still underperformed RNDR-TFCA, indicating that the gain was not simply attributable to increased model capacity.

0.26

Real-time and adaptive anomaly detection algorithm for cyclostationary models

cs.LG stat.ME ·2026-09-08 ·Justyna Witulska, Tomasz Barszcz, Ireneusz Jabłoński, Agnieszka Wyłomańska
similarity 0.51
Abstract · 16 pages

This article introduces PeriodicCALM, an effective real-time anomaly detection framework designed for cyclostationary data streams. While classical cyclostationary processes feature periodically time-varying statistical properties, real-world signals often contain recurring impulsive components that conceal abnormal behavior. Existing real-time methods for struggle with these dynamics, frequently misinterpreting phase-dependent variability as non-cyclic anomalies and causing excessive false alarms. To address this, PeriodicCALM incorporates cycle-dependent variability to systematically ignore regular cyclic impulses while accurately isolating genuine anomalies. Operating in real time with continuous retraining capabilities, the method adapts dynamically to evolving signal characteristics. Comparative evaluations against the baseline CALM framework using simulated data demonstrate significant improvements in detection accuracy and training efficiency, alongside a reduction in prediction latency. Furthermore, the practical utility of PeriodicCALM is validated on real-world vibration signals collected from a compressor monitoring system.

0.30