CS Paper Radar

NLPCC 2026 Task 10: Citation-Level Faithfulness Verification with DeBERTa Ensembles and Class-Wise Calibration

Yanling Li, Zirui Li, Mingyu Wan

cs.CL ·submitted 2026-09-19 05:18 UTC · v1
publishedbenchmark

Abstract

This paper presents our system for Track 2 of the NLPCC 2026 Shared Task 10 on citation-level faithfulness in AI-assisted scientific reporting. Given an atomic scientific claim and the structured full text of its cited paper, the task requires both a four-way relation label and up to three evidence paragraph identifiers. The label head ensembles a paragraph-aware cross-encoder with a document-level DeBERTa-large classifier, followed by class-wise decision calibration. Probability-level fusion is motivated by an out-of-fold tendency to over-predict Topical Match. The evidence head combines paragraph scores from top-20 and top-30 joint models with BM25 scores. The system runs fully offline without external retrieval or LLM prompting. On the final leaderboard, our system achieved 82.9898 overall (89.5491 Macro-F1 and 76.4305 Joint@3), ranking second in Track 2. Ablations and error analysis show that model complementarity and calibration drive the label gains. Gold-evidence inference changes label Macro-F1 negligibly, whereas evidence ranking remains important for Joint@3.

Comment
Accepted to the NLPCC 2026 Shared Task 10 system paper track. Ranked 2nd in Track 2 on the final leaderboard

Closest papers

Nearest neighbours by meaning across the whole index.

Understanding before verifying: Claim normalization for automated citation verification

cs.IR ·2026-08-31 ·Yifan He, Mengjia Wu, Siming Deng, Yi Zhang
similarity 0.69
Abstract

Citation accuracy has been studied for decades because of its importance to research reliability. Content-level citation verification assesses the reliability of scholarly claims. Recent work adopts a two-stage retrieval-classification framework inherited from fact-checking. However, this design overlooks the complexity of the raw citing claim and introduces three issues into the verification system, namely scope mismatch, perspective mismatch, and proposition entanglement. These issues increase the difficulty of retrieval and classification, thereby limiting model performance. Motivated by this gap, we propose claim normalization, which applies three rewriting strategies to the raw citing claim before retrieval and classification, allowing each downstream model to perform a single, well-defined task. Building on this method, we develop Claim-Normalized Citation Verification (CNCV), a new three-stage framework consisting of claim normalization, evidence retrieval with grounding, and citation classification. We evaluate CNCV across 18 classifiers using a factorial experiment on human-annotated citation instances. Compared with the prior two-stage framework, CNCV improves macro F1 by an average of 12% for encoders and 10% for generative LLMs, driven by improved evidence quality, the dominant factor identified in our experiments. Evidence retrieved from automatically normalized claims yields downstream classification performance statistically equivalent to that obtained with manually annotated evidence.

0.25

ScienceJudge: Pattern Perturbation Augmentation for Sentence-Level Scientific Claim Verification

cs.CL ·2026-10-29 ·Chuhai Cai, Xin Chen, Min Yang, Feng Jiang
benchmark similarity 0.68
Abstract · 13 pages, 1 figure; NLPCC 2026 Shared Task 10 (Track 1)

Sentence-level scientific claim verification determines whether each sentence in an AI-generated scientific paragraph is supported by a given multimodal evidence bundle. Fine-grained reporting errors often preserve fluent and plausible statements while introducing subtle evidence-claim deviations, making them difficult to detect under sparse and imbalanced supervision. We propose Pattern Perturbation Augmentation (PPA), which models reporting errors as label-specific faithfulness breaking transformations and induces reusable error patterns from labeled examples. PPA applies these patterns to supported claims to construct controlled hard negatives and expands their coverage through pattern-level, operation-level, and cross-domain augmentation. Based on these augmented views, we develop ScienceJudge, which integrates PPA-trained vision-language predictors and instruction-guided LLM predictors through class-weighted ensemble inference. On the local development set, ScienceJudge improves the average score from 0.8124 to 0.8692, achieving a Macro-F1 of 0.8466 and a Paragraph Exact Match score of 0.8919. Our submitted system ranks first on the official NLPCC 2026 Task 10 Track 1 leaderboard with a final score of 0.6890.

0.29

Do LLMs Know a Good Hypothesis When They See One? Logit-Based Energy Scoring Outperforms Prompted LLM-as-Judge for Scientific Hypothesis Ranking

cs.AI ·2026-08-18 ·Swati Rajwal, Sanjay Das, Tirthankar Ghosal
similarity 0.67
Abstract

Large language models (LLMs) are increasingly used for scientific hypothesis generation. However, evaluating generated hypotheses remains a challenge for trustworthy AI-enabled scientific workflows. Existing approaches often use LLMs as judges or rely on semantic similarity, which can favor familiar ideas over novel ones. We propose a logit-based energy scoring method that evaluates hypotheses using a language model's intrinsic confidence rather than comparative judgment. We benchmarked seven language models on 1,323 papers across 12 disciplines. Each paper was paired with its hypothesis and fifteen incorrect alternatives. Intrinsic scoring reached 33.0% Hit@1 pooled across both scorers, compared with 16.6% for prompted listwise ranking. The strongest configuration, a 1-billion-parameter model using logit-based energy scoring, reached 53.1%, though this was the maximum across 14 model-by-scorer combinations selected post hoc. Overall, intrinsic model confidence shows potential for scientific hypothesis evaluation. This study also motivates future research on confidence-based methods for trustworthy AI-enabled scientific discovery.

0.40

AtomCite: Verification and Correction of Supplied Page-Level Citations in Multi-Page Documents

cs.CL cs.AIcs.IR ·2026-09-05 ·Chen Qian, Yimeng Wang, Yu Chen, Lingfei Wu, Andreas Stathopoulos
benchmark similarity 0.66
Abstract

Large language models answering questions over multi-page documents are expected to cite the supporting pages, yet supplied citations are sometimes inaccurate, and current evaluations score citations at generation time or against text passages: no existing benchmark evaluates whether a system can verify and correct a page-level citation already attached to an answer. We propose AtomCite, an agentic framework that parses an answer into claims, checks each claim against the image of its cited page, and applies a deterministic repair policy. To evaluate it, we introduce DocCite, to our knowledge the first benchmark for systems that verify and correct page-level citations in document images. Built on MP-DocVQA and DUDE, it combines 928 validated injected instances with 2,468 candidate natural errors harvested from frontier- and efficiency-tier models, of which a two-annotator audit confirms 1,909 as genuine errors. Primary labels are assigned deterministically, not by LLM judges, with the human audit as a separate validation layer. Across three model families (Gemini, Claude, and GPT), AtomCite reaches around 93% binary verification accuracy on the injected benchmark, significantly outperforming every OCR-only condition, including a compute-matched control, and exceeding every prior text-based baseline given the same OCR text. Its repair policy lifts citation precision on the injected mix from a constructed 34% to 87-90% while retaining over 90% of correct claims. AtomCite also transfers: with frozen prompts and zero training, it raises the hallucination-detection scores of two open 7-8B models on five public benchmarks above the same models prompted as direct judges. Finally, the audit shows that noise in automatic labels biases measured verifier accuracy and can reverse system rankings, so evaluations relying only on synthetic or automatic labels risk mismeasuring verification capability.

0.24

ATTRICITE: Training an Open 4B Model for Citation Recovery toward Faithful Attribution

cs.DL cs.AI ·2026-09-13 ·Yee Man Choi, Xuehang Guo, Songcheng Cai, Yimu Wang, Yi R. Fung +1 more
benchmarkcode/data similarity 0.65
Abstract · Work in Progress

Faithful citation attribution begins with identifying the intended source for a scientific claim. We study this source-identification capability through citation recovery: recovering the paper cited by the original author from a citation-bearing passage. Our evaluation adopts the published author's citation as an observable human attribution signal and uses target recovery as a proxy for progress toward faithful attribution. We introduce ATTRICITE, an open 4B-parameter model trained for tool-using citation recovery within the CiteGuard retrieval environment, together with CITEALIGN, a 7,607-instance computer-science dataset drawn from recent scientific literature. For controlled evaluation, we construct a 709-instance benchmark subset of CITEALIGN, comprising 410 development instances from 2024 publications and 299 temporally held-out test instances from 2025 publications. Across three runs at an inference temperature of 0.7, GRPO fine-tuning improves Qwen3-4B from 49.4%$\pm$1.5% to 59.8%$\pm$0.2% target-match accuracy, a gain of 10.4 percentage points. Despite using only 4B parameters, ATTRICITE outperforms gpt-oss-20b and comes within 3.9 points of GPT-5.4-mini, while Gemma 4 31B IT achieves the strongest overall performance at 72.0%$\pm$1.0%. We release the model and collection pipeline https://github.com/KathCYM/AttriCite to support reproducible research on citation recovery toward faithful attribution in a continually evolving scientific literature.

0.18

Efficient Context-Limited Telescope Bibliography Classification for the WASP-2025 Shared Task Using SciBERT

cs.LG astro-ph.IM ·2026-08-29 ·Madhusudhana Naidu
publishedbenchmarkcode/data similarity 0.64
Abstract · 3 pages, 2 tables. 1st place system description for the TRACS shared task at WASP 2025 (Third Workshop for Artificial Intelligence for Scien…

The creation of telescope bibliographies is a crucial part of assessing the scientific impact of observatories and ensuring reproducibility in astronomy. This task involves identifying, categorizing, and linking scientific publications that reference or use specific telescopes. However, this process remains largely manual and resource intensive. In this work, we present an efficient SciBERT-based approach for automatic classification of scientific papers into four categories - science, instrumentation, mention, and not telescope. Despite strict context-length constraints (maximum 512 tokens) and limited compute resources, our approach achieved a macro F1 score of 0.89, ranking at the top of the WASP-2025 leaderboard. We analyze the effect of truncation and show that even with half the samples exceeding the token limit, SciBERT's domain alignment enables robust classification. We discuss trade-offs between truncation, chunking, and long-context models, providing insights into the efficiency frontier for scientific text curation.

0.45

SHELF: A Synthetic Harness for Multi-Task Bibliographic Benchmarking

cs.CL cs.AIcs.IR ·2026-09-02 ·Michael J. Bommarito
benchmarkcode/data similarity 0.64
Abstract · 17 pages, 15 tables. Code available at https://github.com/mjbommar/shelf-benchmark ; data available at https://huggingface.co/datasets/mjbom…

Libraries and archives manage large collections with limited staff and computing budgets, yet common benchmarks do not systematically test their bibliographic work. They need to know which methods work for their tasks and what those methods require to run. SHELF, the Synthetic Harness for Evaluating LLM Fitness, addresses this gap. It is a Python system that turns labelled taxonomies, writing specifications, and a generation budget into controlled benchmark data and evaluation tasks. This first release contains 62,899 model-written documents based on Library of Congress vocabularies, with tasks for classification, clustering, retrieval, pair classification, and instruction retrieval. We compare TF, TF-IDF, BM25, popular encoders, and, on subject classification only, zero-shot decoders; each method appears only on tasks that support it. Subject classification reaches 0.8887, while genre-form classification reaches only 0.2605, and several pair and clustering tasks remain near chance. Sparse methods remain competitive on classification, while TF-IDF is the fastest measured arm in the subject timing experiment. SHELF also varies bibliographic facets independently and can generate new, verifiably unseen documents after a model's training cutoff. Comparisons with LCSHBench and Project Gutenberg show that model rankings transfer more reliably than absolute scores, but SHELF scores do not estimate accuracy on production catalogue data. We release all source code and data under permissive licenses on GitHub and Hugging Face.

0.38

Lit3R: Retrieve-Relate-Read for Evidence-Grounded Question Answering over Scientific Literature

cs.CL ·2026-09-15 ·Akira Ise, Kotaro Kumagai, Yuta Yamaguchi, Hisanori Ozaki, Yukio Uematsu +1 more
benchmarkcode/data similarity 0.64
Abstract · Accepted at GroundLM 2026, an EMNLP 2026 Workshop LittraceQA

We describe tus-nlp's Lit3R (Retrieve-Relate-Read) system for LitTraceQA, a shared task for literature-grounded question answering that requires systems to retrieve relevant papers, identify supporting evidence, and generate answers. Lit3R combines off-the-shelf retrieval, reranking, and large language model (LLM) components without task-specific training. The retriever iteratively combines BM25-based sparse and dense retrieval, cross-encoder reranking, and LLM-based verification, and complements retrieval based on the question with paper-to-paper expansion. The reader first identifies supporting evidence within individual papers and then synthesizes evidence across papers to produce the final answer and evidence trace. On the official test set, our system ranked 4th on the leaderboard. Our code is available at https://github.com/tus-ist-nlp/littraceqa.

0.31