CS Paper Radar

Expert-Play Contouring Control: Faster-than-Demonstration Planning from Slow Expert and Fast Play

Seunghoon Cho, Wonsuhk Jung, Sundhar Vinodh Sangeetha, Shreyas Kousik

cs.RO ·submitted 2026-09-19 06:01 UTC · v2

Abstract

Expert demonstrations often specify what a robot should do, but not how fast it can do it. Imitation Learning (IL) inherits demonstration timing, while directly accelerating the learned motion can fail when faster execution changes the robot-object dynamics. We study faster-than-demonstration execution as a dynamics-aware control problem and introduce Expert-Play Contouring Control (EPCC), which combines slow expert demonstrations with fast, non-expert play. Expert demonstrations train a latent trajectory generator whose predictions are reparameterized into a time-independent contour of successful task progression, while play trains a world model (WM) of fast-action outcomes. At deployment, our proposed planner uses the WM to optimize actions that makes maximize progress along the expert-derived contour while penalizing deviation from the intended task evolution. Averaged across three visuomotor manipulation tasks, EPCC achieves a $2.0\times$ the throughput of the IL baseline, including $2.2\times$ that of the throughput of the strongest acceleration baseline on a task with interaction-sensitive object dynamics. Our analysis shows that the gains concentrate where faster execution changes robot-object evolution. Together, our results highlight a simple yet effective principle: demonstrations provide task intent, while play data provides the dynamic coverage needed to execute that intent faster.

Closest papers

Nearest neighbours by meaning across the whole index.

Does Imitation Learning Preserve Temporal Robustness in Dexterous Manipulation? An Expert-Learner Comparison Across Task Execution Speeds

cs.RO cs.LG ·2026-09-01 ·Clinton Enwerem, John S. Baras, Calin Belta
code/data similarity 0.78
Abstract · 19 pages, 10 figures, and 9 tables. Code, data, and evaluation scripts are available at https://github.com/coenwerem/parcelstow

Dexterous manipulation policies learned by imitation are typically evaluated for robustness to variation in scenes, objects, or instructions, but their performance across task execution speeds is less often examined. This leaves open how much temporal robustness a learner retains relative to the expert it imitates. We compare an expert and learner under the same task conditions, initial-condition draws, and speedup factors. We instantiate the evaluation in ParcelStow, a contact-rich task in which the robot acquires, reorients, and inserts a parcel. The demonstrations span the speedup range for the manipulation phases after parcel acquisition. A scripted expert and an Action Chunking with Transformers (ACT) policy trained from the expert's demonstrations both achieve 100 percent task success at nominal speed. Their success rates diverge within the demonstrated range: at its maximum, expert success is 84 percent and ACT success is 53 percent. Two ACT policies with different parameter initializations show similar degradation, decreasing by 34 and 48 percentage points from nominal speed to the maximum demonstrated speed, compared with 16 points for the expert. Stage-level analysis shows that 35 of ACT's 47 failures at the maximum demonstrated speed are insertion misalignments. Under the relative-motion handoff, every ACT acquisition retains the parcel through reorientation and transfer in free space, but only 64 percent complete the overall task, compared with 95 percent after expert acquisition. Across all evaluated policies and speeds, none of the 414 acquisitions without force closure completes the task. Equal nominal task success therefore does not imply preservation of expert performance across execution speeds. Code, data, and evaluation scripts are available at https://github.com/coenwerem/parcelstow.

0.34

HINT-WAM: Hindsight-Informed Training for World Action Models

cs.RO ·2026-11-18 ·Phuong Tuan Dat, Qi Li, Xinchao Wang
community pick similarity 0.77
Abstract

World action models (WAMs) have shown promising generalization and data efficiency in robot manipulation by coupling action generation with predictions of future visual dynamics. Translating these capabilities into reliable task execution, however, remains a challenge for existing post-training methods. Offline supervised fine-tuning provides dense supervision on expert trajectories, but its flow-matching action expert is trained only on noised demonstration actions and never on the intermediate states produced by its own sampler; task-specific adaptation can also compromise pretrained capabilities. On-policy reinforcement learning trains on the policy's own behavior, yet sparse task rewards make exploration and credit assignment difficult, while dense reward shaping still provides scalar evaluations rather than direct action targets. We introduce \textbf{HINT-WAM}, the first on-policy self-distillation framework that supervises the action expert on its own sampling trajectories using hindsight, the future video of the demonstration, as privileged information available to the WAM itself. For each demonstration observation, the student generates its action through its own denoising trajectory, and at the states along this trajectory the same model acts as a teacher conditioned additionally on this hindsight, providing a conditional action distribution as a dense training target, while the student sees only deployment-time inputs and needs no environmental rewards or simulator interaction. To transfer this supervision to a flow-matching action expert, HINT-WAM distills the teacher into the student with an energy score, a distribution-level objective that matches the teacher's action distribution from the student's own samples rather than regressing its velocity field. The project web is available in https://tuandattt.github.io/hintwam/.

0.40

SpeedTuning: Speeding Up Policy Execution with Lightweight Reinforcement Learning

cs.RO cs.AI ·2026-08-10 ·David D. Yuan, Tony Z. Zhao, Kaylee Burns, Chelsea Finn
top venuecode/datahighly cited similarity 0.77
Abstract · 10 pages, 12 figures. This arXiv version includes an appendix with qualitative simulation rollouts and additional ablations. Published at IC…

While learned robotic policies hold promise for advancing generalizable manipulation, their practical deployment is often hindered by suboptimal execution speeds. Imitation learning policies are inherently limited by hardware constraints and the speed of the operator during data collection. In addition, there are no established methods for accelerating policies learned via imitation, and the empirical relationship between execution speed and task success remains underexplored. To address these issues, we introduce SpeedTuning, a reinforcement learning framework specifically designed to enhance the speed of manipulation policies. SpeedTuning learns to predict the optimal execution speed for actions, thereby complementing a base policy without necessitating additional data collection. We provide empirical evidence that SpeedTuning achieves substantial improvements in execution speed, exceeding 2.4x speed-up, while preserving an adequate success rate compared to both the original task policy and straightforward speed-up methods such as linear interpolation at a fixed speed. We evaluate our approach across a diverse set of dynamic and precise tasks, including pouring, throwing, and picking, demonstrating its effectiveness and robustness in enhancing real-world robotic manipulation. Videos and code are available at https://daivdyuan.github.io/speed-tuning/

0.95

EgoSpeedUp: Transferring Human Manipulation Tempo to Robot Policies

cs.RO cs.CV ·2026-09-24 ·Hanbit Oh, Yukiyasu Domae, Takuma Yagi
similarity 0.76
Abstract · 8pages

Robot manipulation policies trained through imitation learning inherit not only the demonstrated behavior but also the conservative execution tempo of robot demonstrations. Existing acceleration approaches can execute faster than the original demonstrations, but determine the appropriate acceleration primarily from robot-side information or a predefined set of tempo factors, leaving open how to obtain a task-appropriate reference for how fast each manipulation phase should progress. We introduce EgoSpeedUp, a framework that uses human manipulation as temporal supervision for robot imitation learning. Our key insight is that human demonstrations naturally reveal task-appropriate, phase-wise manipulation tempo. Given slow robot demonstrations and human demonstrations of the same task, EgoSpeedUp aligns corresponding manipulation phases, estimates their relative execution tempos from multiple human demonstrations, and transfers the resulting phase-wise tempo by retiming the robot demonstrations. The retimed demonstrations are then used for standard behavior cloning, allowing the robot to retain its executable manipulation behavior while learning to perform it at a human-informed tempo. Across two real-world manipulation tasks, EgoSpeedUp improves the task success rate by an average of 25 percentage points (pp) while reducing successful execution time by 36.5%. These results demonstrate that human manipulation tempo provides an effective temporal reference for learning faster and more reliable robot policies.

0.25

FreeSpeed: Training-Free Speed Control for Generative Robot Policies

cs.RO ·2026-10-05 ·Yuxuan Hu, Shilin Shan, Qiheng Wang, Jinghan Yang, Junqiao Fan +2 more
code/data similarity 0.76
Abstract · 37 pages, 21 figures, 14 tables. Project page: https://yuxuanhu9.github.io/FreeSpeed/

Online control of execution speed is essential for deploying robot policies in real-world scenarios, as robots may need to speed up under time constraints or slow down to facilitate human interaction and improve safety. However, imitation-learned policies inherit the execution speed of their demonstrations, and test-time speed modification can introduce unrecoverable out-of-distribution observations, reducing task success. We observe that the directional inconsistency of action chunks reflects task-phase criticality, indicating how aggressively action step lengths can be modified while preserving task success. Based on this observation, we introduce FreeSpeed, a training-free module that post-processes action chunks from pretrained policies. FreeSpeed resamples each predicted chunk at the requested rate, then uses directional inconsistency between adjacent actions as the primary signal for rescaling. This signal adaptively determines how closely the execution speed can approach the requested speed, allowing flexible speed adjustment within the evaluated limits without compromising task success. Across three policy families and 50 simulated tasks, FreeSpeed supports online speed changes, with realized execution rates spanning 0.22x to 2.53x among settings that preserve per-task success. Across four real-world manipulation tasks, FreeSpeed achieves an average success rate of 94.0%, matching the frozen policy's 93.8%, while realizing execution rates from 0.38x to 1.97x.

0.59

Distillation for Efficient Multitask Manipulation Policies via Conditional Flow Matching

cs.RO cs.AIcs.LG ·2026-09-23 ·Shreya Deshmukh, Imen Mahdi, Nick Heppert, Abhinav Valada
similarity 0.76
Abstract

Advances in generative modeling have recently been extensively employed in robotics for policy learning. In particular, Conditional Flow Matching (CFM) trained with expert demonstrations has been shown to outperform existing methods on robot manipulation benchmarks. While prior work has mainly focused on single-task settings, we study the problem from a multi-task perspective, as training independent models for each task is computationally expensive. Multi-Task policy learning comes with its own set of challenges, as naively training on a concatenated dataset of demonstrations would either require increased model capacity to accommodate the added complexity or result in drops in performance. We propose to distill knowledge from single-task CFM experts into a shared multi-task policy by transferring their learned velocity fields. We combine this distillation signal with the original CFM objective to retain fidelity to the demonstrations. Experiments on RLBench show that our approach improves multi-task policy performance over naive training while maintaining a fixed model size.

0.22

DynaForge: Planning-Guided Residual Learning for Dynamic Manipulation Demonstration Generation

cs.RO ·2026-09-22 ·Yiyang Jin, Yu Zheng, Xiao He, Hesheng Wang
similarity 0.76
Abstract · 8 pages, 6 figures. Under review

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

0.24

Revisiting Open-Loop Execution in Robotics: Toward Reactive, Higher-Performing Policies

cs.RO ·2026-08-16 ·Michael Zeng, Abhinav Agarwal, Ajay Bati, Brian Lee, Siddharth Ancha +1 more
positionhighly cited similarity 0.76
Abstract

Action chunking --- the practice of predicting a sequence of actions and executing a prefix open-loop --- has emerged as a key enabler of recent progress in imitation learning for robotic manipulation. However, executing long open-loop prefixes reduces reactivity, limiting policies' ability to correct for errors. Further, the mechanisms underlying these performance benefits remain poorly understood: prior works cite mitigating compounding errors, absorbing inference latency, or smoothing motions, but provide limited controlled evidence or guidance for preserving reactivity. In this work, we argue that long open-loop execution primarily helps short-context policies imitate "non-Markovian demonstrations". Across four simulation and two real-world tasks, we show that expert non-Markovianity strongly shapes the relationship between task success and open-loop execution horizon. Further, we investigate the impact of compounding errors --- the prevailing explanation for long open-loop execution in prior work --- and find that while they matter, expert non-Markovianity has a much stronger impact in our experimental setting. Finally, we show that when policies are provided with a sufficiently long context, open-loop execution is no longer beneficial and the most reactive, closed-loop policies perform best. While imitation learning has seen great success using long open-loop execution, our findings motivate long-context, reactive policies as a more principled and performant paradigm.

0.43