CS Paper Radar

PileBelief: Persistent Physical State for Interaction-Driven World Modeling

Hongyi Lin, Song Zhang, Haiquan Liu, Yang Liu, Jinhua Zhao, Xiaobo Qu

cs.RO ·submitted 2026-09-19 07:54 UTC · v1

Abstract

World models allow robots to anticipate action consequences before execution. This capability is especially valuable in excavation, where each scoop reshapes the terrain and affects subsequent actions. Local observations, however, cannot fully reveal the underlying support and material conditions. We present PileBelief, an interaction-driven persistent world model for partially observed excavation that retains physical evidence beyond the visible surface. It combines an observation-conditioned physical prior with world-addressed deformation memory and physical-response memory. Action-aligned reads and gated residual corrections refine terrain-change and outcome predictions. With deployment weights fixed, completed interactions update measured belief, while hypothetical actions advance a separate imagined state. Compared with a current-observation-only baseline, PileBelief reduces five-step joint prediction error by 10.8% and offline action-selection regret by 65.5%. Experiments on Newton/MPM and real excavation datasets further demonstrate improved terrain-change and bucket-volume prediction. Our method enables multi-step prediction and candidate-action ranking from local observations, even when the underlying soil state is unknown. These results identify persistent physical belief as a useful representation for world models of environments that robots continually reshape.

Closest papers

Nearest neighbours by meaning across the whole index.

From Prediction to Decision: World-Model-Guided Action Selection for Continuous Pile Excavation

cs.RO ·2026-09-14 ·Ailing Zhang, Fan Gao, Song Zhang, Kawa Leong, Ziyu Wu +1 more
similarity 0.77
Abstract · 9 pages,4 figures

Wheel-loader excavation is a sequential decision problem in which every scoop changes the terrain available to subsequent actions. A practical world model must predict action consequences accurately, rank candidates in real time, and operate inside the closed loop of a full-size machine. We present the World-Action Model (WAM), which proposes multiple scoops, rejects geometrically inadmissible candidates, jointly predicts signed terrain change and loaded volume, executes the candidate with the largest predicted load, and replans from the newly observed terrain. On 32 geometry-disjoint MinSlope test episodes, adding world-model ranking to matched diffusion proposals reduces the mean scoop count from 651.8 to 540.6 (17.1%), preserves 32/32 completion, and improves every paired episode. In a complete-system comparison, WAM completes 32/32 episodes versus 29/32 for an independently trained soft actor-critic policy. Comparisons of input representations, spatial support, and five architectures identify an accurate and efficient physics-structured predictor. We further evaluate the interface on event-disjoint full-size-loader data and deploy the complete perception-proposal-prediction-selection-execution loop for autonomous excavation. The ROS2/TensorRT implementation processes five candidates in 72.4 ms on a Jetson AGX Orin. The simulation results establish decision-level gains, while the physical experiments demonstrate real-world closed-loop feasibility.

0.26

From Pixels to Executable Physics: Behavior-Grounded World Models for Embodied Action Consequence Prediction

cs.RO cs.CV ·2026-10-13 ·Ruo Chen, Jiahua Pang, Yingjie Niu, Hongyi Lin, Jun Tian +2 more
similarity 0.72
Abstract

In outdoor environments, varying terrain and contact conditions can cause identical action commands to produce different motion outcomes for quadruped robots. Predicting these outcomes is essential for reliable navigation and informed path selection. Existing video world models can generate visually plausible futures, yet often struggle to capture robot dynamics and terrain interactions, leading to overly optimistic predictions of action outcomes. We present DR-WM, a physically consistent world model that incorporates robot-terrain contact dynamics to predict the consequences of quadruped actions. Starting from an initial RGB image, our method reconstructs scene geometry and integrates dense, dimensionless priors over terrain contact properties, calibrated using real-world action-response data. The resulting terrain model supports the simulation of physics with spatially varying contact properties such as friction. Given the initial state of the robot and candidate action sequences, we simulate its future motion and use the resulting camera trajectories and rendered geometry to guide the training of a video world model. The generated future observations are then used to update the terrain reconstruction, enabling iterative model rollouts without additional real-world images. Extensive experiments demonstrate that DR-WM substantially outperforms geometry-only baselines and baselines with uniform physical parameters on key physical metrics characterizing action outcomes, while achieving the best performance among the evaluated baselines. These physically grounded predictions support more informed action selection: across 90 challenging scenarios, an 8B vision-language model augmented with DR-WM outperforms an unassisted 32B vision-language model on five of six evaluation metrics.

0.16

RM-WAM: Reliable Memory-Augmented World Action Models for Long-Horizon Robot Manipulation

cs.RO ·2026-10-11 ·Cui Miao, Junhao Yu, Ping Liu, Ning Yang, Xuhua Chen +3 more
similarity 0.70
Abstract

World Action Models (WAMs) improve robotic manipulation by jointly predicting future visual states and actions, yet most existing methods make decisions primarily from the current observation. This limits their reliability in long-horizon tasks, where visually similar states may correspond to different interaction histories and task stages. Moreover, directly incorporating historical observations can introduce stale, stage-mismatched, or error-contaminated information, leading to inaccurate world prediction and accumulated closed-loop errors. We propose RM-WAM, a reliable memory-augmented World Action Model that treats memory as a context-dependent predictive resource rather than universally useful historical context. RM-WAM represents history using complementary short-term visual state memory and latent event memory, which respectively capture recent interaction dynamics and longer-term state transitions. A counterfactual memory learning scheme varies the accessible history while keeping the current inputs and prediction targets fixed, enabling the model to learn a context-dependent utility estimate for historical memory. Based on this estimate, a utility-aware gating mechanism adaptively controls memory injection into the world-action backbone. Experiments demonstrate that RM-WAM highlights the importance of reliable and selective memory utilization in long-horizon tasks.

0.20

DeltaWorld: Physically Consistent Interactive World Simulators via Action-Conditioned Latent Increment Learning

cs.RO ·2026-10-02 ·Boyuan Hou, Xiaoge Cao, Chaofan Zhang, Shuo Wang, Shaowei Cui
benchmark similarity 0.70
Abstract

Interactive world simulators can provide scalable environments for robot planning, policy training, and evaluation by predicting action consequences while reducing reliance on repeated physical rollouts. To serve these applications, they must generate future image sequences that respond faithfully to robot actions and preserve the dynamics of robot-object interactions over long horizons. However, existing world models typically predict the entire next latent state and often fail to capture subtle changes induced by robot actions. Such omissions can produce physically implausible outcomes, including object interpenetration and excessive deformation. To address this limitation, we propose DeltaWorld, a physically consistent interactive world simulator for robotic manipulation. Our method introduces the Delta Latent Transition Model (Delta-LTM), which predicts action-induced latent feature changes and adds them to the current latent state to obtain the next state, rather than predicting the next latent state directly. To mitigate object interpenetration and excessive deformation in predicted future frames, Interaction-aware Latent Alignment is introduced to construct counterfactual interaction regions and supervise interaction-related latent changes. DeltaWorld is evaluated on the IWS manipulation benchmark and a self-collected cross-robot dataset covering multiple robot embodiments and manipulation tasks. On the cross-robot dataset, DeltaWorld reduces FVD by 46.6% and LPIPS by 31.1% relative to the IWS baseline. These results highlight the potential of DeltaWorld for long-horizon action-conditioned video prediction in robotic manipulation.

0.19

From Target Selection to Digging: A Learning-Based Framework for Continuous Autonomous Excavation

cs.RO ·2026-09-24 ·Shuai Zhao, Ji-an Pan, Quantao Yang, Zheng Wang, Chaoyi Chen +2 more
similarity 0.68
Abstract · 8 pages, 7 figures, 4 tables. Updated author affiliations; technical content unchanged

Repeated excavation continuously reshapes pile geometry, requiring an autonomous excavator to adapt its digging targets and coordinate motion across successive excavation cycles. We present a learning-based framework for continuous autonomous excavation that integrates terrain-aware target selection with reinforcement- and imitation-learning controllers. The framework separates target-conditioned motion from local digging: a shared task-conditioned RL policy controls waypoint-guided approach and loaded transport, while an IL policy learns vision-based digging and lifting from expert demonstrations. Digging targets are selected from LiDAR elevation maps and converted into bucket-tip waypoints for motion control. The control architecture coordinates the learned policies and deterministic unloading through a shared motion interface. The complete system is deployed on a scaled hydraulic excavator with multimodal sensing and closed-loop actuator control. Offline replay and physical experiments demonstrate more consistent target selection, shorter local motion time, and increased payload compared with the respective baselines. The learned digging policy achieves a mean payload of 6.52 kg per completed cycle, compared with 2.68 kg for Fixed Dig. Three five-scoop runs further demonstrate consecutive autonomous excavation under continuously changing pile geometry.

0.22

The Planning Limits of Latent World Models

cs.RO cs.CV ·2026-09-30 ·Ali Alrasheed, Basim Azam, Naveed Akhtar
similarity 0.68
Abstract

World models offer a promising way to help robots understand how the physical world evolves and plan complex behaviours through imagination. Yet existing studies mainly demonstrate what these models can accomplish, leaving unclear when their predictions remain useful for planning and where they fail. We study this question using action-conditioned predictors built on five frozen self-supervised visual backbones: V-JEPA 2, V-JEPA 2.1, VideoMAEv2, VideoPrism, and DINOv2. We use frozen backbones to test representations intended to transfer across environments. We evaluate these models on diverse Meta-World manipulation tasks and real-robot interactions from BridgeData V2. We find that a world model guides action selection reliably only when the goal lies within, or slightly beyond, the trajectory it imagines during planning. With five-step rollouts, the length the predictor was trained on, the world model ranks actions reliably only for targets five to ten control steps ahead, whereas task goals lie 16 to 53 steps away. Neither an 81-fold larger predictor nor longer-rollout training extends this range; the encoder affects both range and closed-loop success, with V-JEPA 2.1 performing most consistently. More fundamentally, the limit persists under perfect prediction: using the real simulator, success falls from 92% to 41% as the target moves from five to twenty steps ahead of a five-step rollout. Planning therefore requires either longer imagined trajectories or closer subgoals. For distant goals, pure imagination succeeds in 23% of episodes, planning with feedback (MPC) raises success to 30%, imagining as far as the goal to 47%, and nearby expert subgoals to 76%. Used within its plannable range, a world model can also improve a vision-language-action (VLA) policy: choosing among eight actions the VLA proposes raises its success from 65% to 77% across 16 different tasks.

0.43

$R^2$-WAM: Repair-and-Reject Post-Training for World Action Models

cs.RO ·2026-10-04 ·Ruiyan Xu, Haisheng Su, Sixu Lin, Zhaokun Yue, Chengming Hu +2 more
code/data similarity 0.68
Abstract · 24 pages, 7 figures

World Action Models (WAMs) emerge as a promising foundation for policy refinement by predicting the consequences of sampled actions. However, visually plausible predictions can mislead policy refinement if they fail to reflect the input actions. To address this mismatch, we introduce $R^2$-WAM, a two-stage repair-and-reject post-training framework that first improves the consistency of predicted futures with input actions, then uses these futures to select inferior action samples for negative fine-tuning. The repair stage grounds imagination in observed robot behavior through a kinematic alignment score that measures agreement between predicted and demonstrated motion, enabling the predicted video to faithfully reflect its input actions. Using the repaired video model, the rejection stage compares imagined outcomes of sampled and demonstrated actions, selectively applying negative fine-tuning to samples whose predicted task progress falls below the demonstrated reference by a prescribed margin. Together, the two stages extend video prediction from representation learning to consequence-based policy refinement without additional environment interaction or changes to the inference procedure. $R^2$-WAM achieves 93.8% average success on RoboTwin 2.0 across clean and randomized settings. On the long-horizon real-world Fold Shirt task, it achieves 87.5% average success, compared with 0% for Fast-WAM. Our project page is available at https://r2-wam.github.io/.

0.34

Achieve What You Imagined: Learning to Align Actions with Visual Plans

cs.RO cs.AIcs.LG ·2026-09-27 ·Yuheng Qiao, Ziran Wei, Xiaohan Wang, Daqiang Guo, Yichen Luo +3 more
similarity 0.68
Abstract · 9 pages, 8 figures, 2 tables

World-action models can jointly predict future visual observations and robot actions. However, discrepancies may exist between their visual predictions and the consequences implied by generated actions. We observe that WAMs can often generate visually plausible task-completion outcomes before producing action sequences that reliably achieve them. Consequently, we treat the WAM-generated visual prediction as a goal-conditioned visual proposal rather than a directly executable plan. We use a frozen action-conditioned world model to predict action-conditioned consequences and construct feedback based on consistency between the two future predictions and alignment with the terminal goal. Leveraging this feedback, we employ Flow Policy Optimization (FPO) to optimize the action head of the WAM. This framework avoids online robot interaction and additional training of task-specific reward models. Across four real-world UR5 manipulation tasks, our method increases the mean success rate from 43.4% to 75.1%, compared with 61.4% for $π_{0.5}$. These results show that cross-model prediction discrepancy can provide useful feedback for improving robot policies under the evaluated manipulation tasks. Website: https://imagine-to-achieve.github.io/

0.30