CS Paper Radar

Scalable SSIM Estimation from PSNR for Per-Title and Context-Adaptive Encoding Workflows

Luc Trudeau, Maria G. Martini

eess.IV cs.MM ·submitted 2026-09-19 11:42 UTC · v1
publishedcode/datahot direction

Abstract

Modern streaming pipelines run hundreds of candidate encodes per asset to support per-title encoding, shot-based optimization, and context-adaptive ABR ladder construction. These techniques have moved perceptual quality metrics into the critical path: SSIM and VMAF now guide encoding decisions rather than passively monitor them. We measure that SSIM evaluation accounts for 7-35% of x264 encode time at production speed presets, with the cost ratio rising as encoders run faster. We propose ApproxSSIMate, a low-complexity method for estimating SSIM from PSNR combined with reference-sequence statistics computed once per sequence and reused across every candidate encode. This decouples quality estimation from the encode-decode-compare loop, enabling perceptual quality feedback in live encoding and amortizing quality measurement across candidate encodes in per-title workflows. We validate the approach across H.264/AVC, H.265/HEVC, and AV1 on the Objective-1-fast dataset and release the implementation as free and open-source software.

Comment
Presented at IBC 2026, Amsterdam, The Netherlands. 2026 IBC Technical Paper

Closest papers

Nearest neighbours by meaning across the whole index.

Unified Generative Video Compression with Autoregressive and Bidirectional Video Diffusion

cs.CV ·2026-10-09 ·Tianyu Zhang, Shuai Huo, Dengchao Jin, Hewei Liu, Meng Lei +5 more
similarity 0.65
Abstract

Video diffusion models can reconstruct visually compelling content from severely compressed representations at ultra-low bitrates, but they impose a rigid deployment trade-off. Bidirectional (BI) models achieve high quality through dense full-sequence attention, yet require the entire sequence before reconstruction and incur substantial latency. Autoregressive (AR) models enable low-delay streaming, but their restricted temporal context reduces compression efficiency. This tension is particularly relevant when a video stream must be decoded in real time yet is also stored for later, quality-oriented playback, making AR and BI models natural choices for the live and replay stages, respectively. To support both stages, we present UniGVC, a Unified Generative Video Codec that supports two decoding modes from a single bitstream. UniGVC-BI employs a BI-DiT with dense attention for quality-oriented random-access decoding, whereas UniGVC-AR uses windowed AR-DiT for low-delay streaming. Both paths share a hierarchical latent codec that recurrently produces the same conditions with ultra-low bitrates, allowing UniGVC-BI to serve as a conditional teacher for single-step distillation of UniGVC-AR. A tiny conditional video decoder further reduces streaming latency while preserving most of the reconstruction quality. On standard 1080p benchmarks, UniGVC-BI achieves the best overall rate-distortion-perception trade-off among the evaluated methods and produces temporally stable video at rates as low as 0.0005 bits per pixel. Meanwhile, UniGVC-AR remains competitive while decoding 1080p video at 36.85 FPS, over $250\times$ faster than UniGVC-BI. Code and models will be released later.

0.23

Can LLMs Design Video Coding Tools? A Case Study on Planar Mode

cs.MM cs.AI ·2026-09-01 ·Yingwen Zhang, Meng Wang, Liqiang He, Shiqi Wang
benchmark similarity 0.64
Abstract

This paper explores whether large language models (LLMs) can design video coding tools, a highly challenging task due to the intricate algorithmic coupling of tool modifications. In particular, we present an empirical case study on the Planar mode, a long-standing intra prediction tool in video coding standards. Our experiments operate within a generation-and-evaluation loop, with the LLM generating new Planar predictors, encoder trials evaluating their coding performance, and the LLM re-generating refined implementations based on the evaluation feedback. We first examine directly replacing the default Planar mode in the Fraunhofer Versatile Video Encoder (VVenC) under its faster preset. Experimental results demonstrate that the LLM-generated mode can outperform the conventional Planar mode on this lightweight toolset, achieving 0.18% bitrate savings with 0.4% complexity overhead on the standard benchmark. We further extend our evaluation to the Enhanced Compression Model (ECM). Leveraging newly introduced directional Planar modes, we investigate two integration strategies: directly replacing them, and introducing the LLM-generated predictor as an additional prediction mode with new syntax elements. The empirical results suggest that both strategies can yield coding gains under a constrained low-resolution setting. Overall, this study offers preliminary evidence and practical insights, highlighting both the potential and open challenges of LLM-based coding tool design.

0.22

Towards High-Fidelity Learned Video Compression

cs.CV ·2026-11-19 ·Bumyoon Kim, Yongseong Kim, Inhyuk Jeong, Byeungwoo Jeon
similarity 0.64
Abstract · 11 pages, 5 figures

Professional video workflows operate at qualities that learned video codecs do not reach. We measure how much of a professional quality range a codec covers, from the lowest quality of the standard test conditions, VVC at QP 37, to the highest 4:2:2 grade of the production codec ProRes. To compare inter-frame coding alone, every codec receives original frames as references at the intra positions. On 10-bit YCbCr 4:2:2 test sequences, four recent learned codecs cover 24 to 38% of this range. Their encoders are feed-forward networks with a fixed latent capacity, the number of latent values per sample, of at most 0.25, and removing their quantization raises the quality by at most 1 dB. We propose a learned inter-frame codec whose encoder searches, as the encoders of conventional codecs do. It searches block motion, which a learned network refines, and it searches among learned block transforms whose latent capacity ranges up to 1, selecting the partition, the skip decisions, and the quantized coefficients by a rate-distortion cost. Our codec reaches the upper end of the range on all six sequences. With all residual blocks fixed to 16x16, whose latent capacity is 0.25, the same codec covers 55% of the range, with or without quantization.

0.27

CASR: Content-Adaptive Neural Super-Resolution Post-Filter for Versatile Video Coding via Low-Rank Overfitting

eess.IV ·2026-09-29 ·Khoa Pham-Dinh, Francesco Cricri, Maria Santamaria, Honglei Zhang, Hamed R. Tavakoli +3 more
similarity 0.64
Abstract · Accepted to the 2026 IEEE 28th International Workshop on Multimedia Signal Processing (MMSP 2026), Best Student Paper Award

The use of super-resolution as a post-processing step following a video codec allows videos to be encoded at reduced spatial resolution at the encoder side and to be reconstructed and upsampled to the original resolution at the decoder side. In this way, the required bitrate is reduced and the quality of the reconstructed frames is improved without modifying the core coding architecture. However, generic SR models are typically trained offline and lack sufficient adaptability to the diverse content characteristics and compression artifacts produced by video codecs, which limits their effectiveness during test time. To address the limitation, this paper proposes CASR (Content-Adaptive Super-Resolution), a content-adaptive SR post-filter framework for Versatile Video Coding (VVC), based on encoder-side overfitting on each input sequence. In order to limit the bitrate overhead required for signalling the content adaptation signal, i.e. the weight-update, Low-Rank Adaptation (LoRA) is leveraged. The method freezes the convolution kernels of a pretrained SR network and fine-tunes only lightweight rank-r matrices attached to selected convolution layers, using VVC decoded frames and quantization-parameter (QP) maps of test sequences as supervision. The resulting low-rank update is compressed with the MPEG Neural Network Compression and Representation (NNR) standard. Experiments on the JVET common test conditions (CTC) class A1 and A2 sequences indicate that LoRA-based content adaptation provides bitrate savings over a non-adapted SR post-filter at a small signalling cost. Compared with the VVC Test Model (VTM21), the proposed method achieves BD-rate savings of -10.93% (Y), -15.39% (U), -24.41% (V) under random access and -13.43% (Y), -5.75% (U), -22.94% (V) under all-intra. An ablation of the LoRA rank r further shows that r=4 provides the best trade-off between coding gain and signalling cost.

0.19

Neural video codecs quality assessment dataset and benchmark

cs.CV ·2026-08-29 ·Nikolay Safonov, Nikita Gornostaev, Alexandra Dubonos, Dmitriy Vatolin
top venuebenchmarkdatasetcode/data similarity 0.64
Abstract

Video traffic constitutes a significant share of global web traffic. To reduce its volume, video codecs have been developed and continuously improved. While the industry has achieved substantial progress in traditional video coding, neural video codecs (NVCs) have recently emerged as a new approach that applies deep learning to video compression. This creates new challenges for compression quality assessment, which is essential for the further development and improvement of such codecs. In particular, it is important to evaluate the novel temporal compression paradigms introduced by NVCs. In this work, we present a large-scale subjective dataset of videos compressed with both neural and traditional video codecs. The subjective scores were collected through crowd-sourced pairwise comparisons. The proposed dataset provides a valuable resource for the development and benchmarking of video quality metrics tailored to neural video codecs. The dataset is available at the following link: https://videoprocessing.github.io/nvc-dataset-benchmark

0.45

Lossy Event Compression: From Event Stream Distortion to Task Performance

cs.CV eess.IV ·2026-08-28 ·Zahra Rezaee, Catarina Brites, João Ascenso
published similarity 0.64
Abstract

Event cameras generate asynchronous, sparse data streams with microsecond temporal resolution, but in moderate-to-high motion scenes they can produce as many as hundreds of millions of events per second, creating significant bandwidth and storage challenges. Lossy compression is therefore essential for practical deployment, yet existing event stream distortion metrics fail to reliably predict compression-induced degradation at the task level, forcing codec optimization to rely on expensive task-specific evaluations. To address this gap, this paper introduces two fundamentally different event compression pipelines: i) an aggregation-based pipeline that converts the event stream into polarity-based histogram frames for compression with the conventional image codec JPEG 2000, and ii) a frame-free point cloud-based pipeline that codes events natively as 3D points using the octree-based codec G-PCC. Both pipelines are then assessed within a unified task-driven evaluation framework that relates event stream distortion to downstream application performance across four representative tasks: i) video reconstruction, ii) object detection, iii) optical flow estimation, and a delay-sensitive task iv) asynchronous feature tracking under a reference-relative protocol. Building on this framework, five classification-based distortion metrics are applied to event compression for the first time, to the best of the authors' knowledge, and benchmarked against existing event stream metrics. Experimental results demonstrate that the proposed metrics reliably predict compression-induced task degradation across different coding frameworks. This demonstrates that event stream distortion assessment can be an efficient alternative to repeated task-specific evaluation, providing direct guidance for the development and optimization of future event data coding solutions.

0.35

Code2Video-Compass: A Comprehensive Benchmark for General-Purpose Code-Based Video Generation across T2V, I2V, and V2V

cs.CV cs.AI ·2026-10-20 ·Zhenghan Chen, Zekai Shao, Xin Lin, Leting Cheng, Siming Chen
benchmarkcommunity pick similarity 0.63
Abstract

Code-based video generation offers fine-grained control, targeted editing, and component reuse compared with direct video generation. This approach requires multimodal large language models (MLLMs) to translate visual and temporal requirements into executable programs that produce complete videos. However, existing code-based benchmarks primarily target specialized tasks, leaving complete video creation across diverse creative categories and input modalities insufficiently evaluated. We introduce Code2Video-Compass, a general-purpose benchmark for code-based video generation across text-to-video (T2V), image-to-video (I2V), and video-to-video (V2V) settings. Code2Video-Compass comprises 2,104 tasks spanning 10 categories, 24 subtypes, and three complexity dimensions covering construction, dynamic animation, and state dependency. It combines tasks curated from textual instructions and visual references with corresponding T2V, I2V, and V2V tasks derived from complete professional and user-created videos. We propose a dual-level evaluation framework combining 12 objective metrics and five subjective metrics. Objective evaluation covers operational performance, video quality, text-video alignment, and reference fidelity, while subjective evaluation uses an MLLM judge to evaluate instruction following and holistic video quality. Extensive evaluation of 15 recent proprietary and open-weight MLLMs from nine families reveals that even leading models face challenges in reliably generating high-quality complete videos aligned with textual and visual requirements, with performance generally declining as construction, dynamic animation, and state-dependency complexity increases. We anticipate that Code2Video-Compass will advance reliable, coherent, and controllable code-based video generation and inspire broader progress in programmatic visual creation.

0.50

SemABR: Measuring Video Semantic Fidelity with Multimodal LLMs for Adaptive Bitrate Streaming

cs.MM cs.NI ·2026-09-16 ·Shiqi Xu, Soung Chang Liew, Yuyang Du
similarity 0.62
Abstract

Conventional video metrics such as PSNR, SSIM, and VMAF measure visual distortion or perceptual quality, but they do not directly capture semantic preservation: whether compression retains a video's objects, actions, and temporal narrative. Existing Quality-of-Experience (QoE)-driven bitrate-selection and resource-allocation methods primarily aim to minimize rebuffering and bitrate switching while maximizing perceptual video quality, without explicitly considering semantic preservation. To address this gap, we introduce video semantic fidelity (SF), a metric that quantifies how well a compressed video preserves the semantic content of its source. An offline multimodal large language model (MLLM) generates structured descriptions of the reference and compressed versions of the video, and a separate text-only large language model (LLM) evaluates their semantic correspondence. The resulting content-dependent SF--bitrate profiles are cached and queried by the online bitrate selector without invoking MLLMs at runtime. Evaluations on three subjective QoE benchmarks show a consistent positive association between SF and mean opinion scores (MOS). A separate human semantic-rating study evaluates semantic preservation and shows that SF correlates more strongly with human judgments than conventional video metrics. We then embed these profiles into a 5G MEC-assisted video-on-demand (VoD) resource-allocation framework at the base station. When wireless resources cannot support high bitrate levels for all users, the framework uses the SF--bitrate profiles to select bitrate levels jointly across users and reduce the semantic loss caused by the required bitrate reductions. NS-3 simulations with the 5G NR module show that the proposed framework achieves higher average and worst-user SF than the evaluated baselines, with a widening advantage as the wireless resources available to each user decrease.

0.52