CS Paper Radar

Accurate Motion Estimation with Bézier Control Point for Efficient Frame Interpolation

Shuhao Han, Chenyang Wu, Chun-Le Guo, Zheng-Peng Duan, Zhen Li, Ming-Ming Cheng, Chongyi Li

cs.CV ·submitted 2026-09-20 06:47 UTC · v1
publishedbenchmarkcode/data

Abstract

In frame interpolation tasks, motion ambiguity in the training set causes models to generate blurry intermediate frames. Moreover, the assumption of uniform motion between frames during inference further leads to inaccuracies in the generated intermediate frames. To tackle these challenges, we propose an Accurate motion estimation algorithm with Bézier Control point, ABC-Inter, for efficient frame Interpolation. Specifically, ABC-Inter designs an Accurate Flow estimation Module (AFM) by decoupling two-frame features and mapping to corresponding coordinates to better estimate the optical flow between the two frames. Furthermore, ABC-Inter eliminates motion ambiguity in the training set by introducing Bézier control points that are computed using the input frames and the intermediate ground-truth (gt) frames. This allows the model to estimate accurate optical flow between two frames during the training process, thereby solving the blurriness problem in the generated intermediate frames during inference. Benefiting from the more accurate flow estimation between two frames, we can introduce additional frames and directly use multiple flows to calculate Bézier control points for modeling non-uniform motion without retraining the model. Simultaneously, to realize the estimation of non-linear motion using only two frames, we also introduce a new Bézier control point estimation module which achieves better motion estimation between the two frames by performing fine-tuning on the model in the second stage. Experimental results demonstrate that our ABC-Inter achieves state-of-the-art performance on multiple benchmark datasets and exhibits excellent visual perception.

Comment
Accepted by IEEE TIP. Code: https://github.com/SHH-Han/ABC-Inter

Closest papers

Nearest neighbours by meaning across the whole index.

Following Motion for Sequential Modeling in Video Frame Interpolation

cs.CV ·2026-08-24 ·Jaehyun Park, Nam Ik Cho
top venue similarity 0.69
Abstract · Accepted to ECCV 2026

State Space Models (SSMs) have surfaced as a promising architecture in Video Frame Interpolation (VFI), as they can capture long-range dependencies with linear computational complexity. However, their predefined scanning order limits their effectiveness in modeling the dynamic motion trajectories inherent in VFI problems. To tackle this challenge, we propose Motion-Guided Mamba for Video Frame Interpolation (MGMVFI), an adaptation of the selective state space model tailored explicitly for VFI. MGMVFI introduces Motion-Guided Serialization (MGS), which leverages optical flow to define a motion-adaptive 1D input order for the SSM. This aligns the causal state updates with semantically related tokens, enabling motion-consistent feature propagation, particularly for large and dynamic motions. Additionally, to mitigate the unreliable feature representations caused by inaccurate optical flow estimates, we introduce contextual synthesis that utilizes the surrounding spatial context for robust inter-frame feature synthesis. These components are seamlessly integrated within our tailored Mamba architecture, which also employs a lightweight refinement block to enhance local detail reconstruction at a reduced computational cost. Extensive experiments on standard VFI benchmarks demonstrate that MGMVFI achievesstate-of-the-artperformance,particularly on complex and dynamic motions, thereby establishing a new direction for sequence modeling in video interpolation.

0.31

SNM-VFI: Symmetric Nonlinear Motion-Guided Generative Video Frame Interpolation

cs.CV ·2026-08-13 ·Jisoo Jeong, Hong Cai, Jamie Menjay Lin, Hanno Ackermann, Hyeonjun Sim +3 more
similarity 0.66
Abstract · ECCVW 2026

We propose Symmetric Nonlinear Motion-guided Generative Video Frame Interpolation (SNM-VFI), a training-free framework for motion-controllable generative video frame interpolation with pre-trained optical flow and video diffusion models. Unlike conventional diffusion-based VFI methods that synthesize intermediate frames from random noise, SNM-VFI guides the generative process with correspondence-aware frames produced by a symmetric nonlinear motion model. Specifically, we first utilize a pre-trained optical flow model to construct multi-frame nonlinear flow-based intermediate frames and confidence maps. These flow-guided frames are then encoded as latent priors to initialize and iteratively guide a pre-trained Video Diffusion model, enabling the diffusion model to preserve dense motion correspondence while improving perceptual realism. To further enhance output quality, we employ confidence maps to fuse structurally reliable flow-based predictions with diffusion-generated details in uncertain regions such as occlusions and object boundaries. Extensive evaluations on challenging benchmarks, including DAVIS, Sintel, and KITTI, demonstrate that SNM-VFI achieves strong perceptual quality, competitive reconstruction accuracy, and robust temporal coherence across diverse motion scenarios.

0.04

SplatFlow3D: Learning Scene Flow via 3D Motion Feature Splatting

cs.CV ·2026-11-14 ·Bo Wang, Dekang Zhu, Jian Li, Zhipeng Meng, Bo Wang +1 more
publishedcode/data similarity 0.66
Abstract

Considering the motion continuity and stability of 3D objects over short inter-frame intervals, introducing multi-frame settings in scene flow estimation can potentially address occlusion. In this paper, we propose a two-frame backbone, SimpleFlow3D, which integrates dense information from the image plane and sparse information from the depth dimension in a decoupling-followed-by-coupling manner by hierarchically constructing the 3D motion feature. SimpleFlow3D achieves SOTA results with minimal parameters. We also propose a weight-sharing multi-frame framework to splat the previous 3D motion feature to the current estimation process. The framework unifies the first and non-first frame inference by constructing pseudo inputs. After combining the proposed framework and backbone, the newly born multi-frame method SplatFlow3D further advances the state of the art. It achieves lower errors than the two-frame backbone, with fewer parameters than current methods. On both KITTI and Spring, SplatFlow3D ranked 1st over all published and submitted methods. Experiments show that SplatFlow3D improves occlusion handling, non-rigid motion estimation, and generalization to real-world scenes. Code is available at https://github.com/wwsource/SplatFlow3D.

0.33

E-WAVE: Event-based Continuous Optical Flow via Warping-Aligned Visual Encoding

cs.CV ·2026-09-28 ·Jiale Wu, Xiaoyang Bai, Haoming Yu, Yiwei Chen, Yifan Peng +1 more
similarity 0.66
Abstract

Temporally dense optical flow is essential for dynamic perception in immersive VR/AR systems, where rapid head, hand, and object motion must be continuously captured and tracked. Existing frame-based optical flow estimation methods are constrained by the tradeoff between temporal resolution and computational cost; while event cameras, with their high temporal resolution and energy efficiency, serve as a natural solution to the dilemma. However, event-based approaches commonly rely on correlation volumes to capture pairwise voxel correspondences, which incur substantial memory and computation overhead. We present E-WAVE, a correlation-free framework for high-temporal-resolution (HTR) optical flow estimation from event streams. Instead of constructing all-pairs correlation volumes, E-WAVE employs global attention mechanism to model long-range feature dependencies and performs trajectory guided feature warping using Bézier curve. Through iterative updates, it predicts trajectories that allow for querying at arbitrary timestamps without repeated inference. Experiments on MultiFlow and DSEC-Flow demonstrate a 25% lower trajectory error and comparable endpoint flow estimation accuracy relative to state-of-the art baselines. Additional evaluations on self-captured data using a head-mounted prototype validate that E-WAVE remains robust under challenging real-world conditions.

0.21

Residual Motion Splatting for Continuous Space-Time Video Super-Resolution

cs.CV ·2026-10-28 ·Vincent Herfeld, Eva Coupet{é}, Julien Mairal, Jean Ponce
similarity 0.66
Abstract

Continuous space-time video super-resolution produces a high-resolution, highframe-rate video from a low-resolution, low-frame-rate one at arbitrary spatial scales and temporal instants. Classical spatial multi-frame super-resolution has shown that detail beyond a single frame's sampling limit can be recovered by aligning complementary observations with sub-pixel precision and accumulating them on a finer grid. Existing learning-based methods largely depart from this principle: some align and fuse frames only at low resolution before regressing a continuous high-resolution representation, while others interpolate each frame to the output resolution before splatting. In both cases, the per-frame samples are resampled before fusion, so their sub-pixel positions are lost before frames are combined. Restoring this principle in a learned continuous model raises two challenges: estimating sub-pixel motion at unobserved times, and handling holes and occlusions when splatting a coarse grid onto a finer one. We address the first by predicting per-pixel continuous trajectories that refine linear optical-flow paths with smooth residual motion, using features integrated over the full video sequence. We address the second by directly splatting consecutive low-resolution features in a learned latent space onto a high-resolution grid at their predicted sub-pixel positions with predicted visibility weights, before a decoder resolves remaining ambiguities. This makes temporal interpolation and multi-frame superresolution a single operation. Our method improves both reconstruction fidelity and perceptual quality on multiple standard benchmarks over the state of the art, while running up to an order of magnitude faster.

0.20

DispFlow-GS: Displacement Flow Supervision with Motion Disentangling for Monocular Deformable 3D Gaussian Splatting

cs.CV ·2026-09-29 ·Thai Duy Nguyen, Haitian Zhang, Addison Lin Wang
similarity 0.63
Abstract

Accurate dynamic scene reconstruction is important for robotic perception, where temporally consistent representations of dynamic environments are essential. Deformable 3D Gaussian Splatting (3DGS) models dynamic scenes through deformation fields, and recent methods incorporate motion supervision by aligning rendered Gaussian flow with optical flow. However, we find that such Gaussian-flow-based supervision provides only limited improvements in motion modeling. We identify a fundamental limitation of this supervision paradigm, namely a domain gap between rendered Gaussian flow and optical flow. To address this limitation, we propose a motion supervision framework built on Displacement Flow, which splats per-Gaussian 3D displacements onto the image plane to provide direct and stable optimization signals. We further disentangle scene motion from camera motion via intermediate-view rendering, enabling more reliable motion priors and targeted constraints on deformation and geometry. We also observe a discrepancy between motion fidelity and image-based evaluation, where improved motion awareness does not necessarily translate into better rendered image quality or higher image-based metric scores. Motivated by this mismatch, we introduce Deformation-Rendering Consistency (DRC), a motion-aware metric that measures the alignment between predicted deformation and rendering improvement. Experiments on dynamic scene benchmarks show substantial improvements in motion localization and motion--rendering consistency, reaching up to 39% and 6%, respectively, while image-based metrics change by only about 0.1%. These results confirm the observed mismatch between motion fidelity and image-based evaluation, demonstrating the significance of DRC for motion-aware evaluation.

0.13

Event-Based Motion Estimation via Oriented Distance Fields

cs.CV cs.RO ·2026-08-25 ·Lei Sun, Yuqin Ma, Weilun Li, Haoran Liang, Runyi Yang +3 more
similarity 0.63
Abstract

Event-based motion estimation is central to tasks that demand high temporal resolution and robustness to fast motion. Existing methods typically rely on iterative optimization or repeated hypothesis comparison, offsetting the sensor's low-latency advantage. We propose Oriented Distance Field Motion Estimation (ODF Motion Estimation), which replaces this optimization with a single averaging step over a precomputed field of event distance vectors, combined with an adaptive event-count selection strategy and a parameter-free trail filter. On public and self-collected datasets, ODF motion estimation reaches sub-pixel accuracy at the lowest latency among compared methods. We validate its generality on two downstream applications rather than treating them as separate contributions. First, the estimated trajectory is converted into a blur kernel and paired with a compact iterative-unfolding network, trained on simulated motion-estimation noise, for real-time non-blind image deblurring, attaining competitive or superior PSNR/SSIM with under 1M parameters. Second, the same precomputed field is repurposed for directional event filtering in a low-power asynchronous pupil and glint tracker, sustaining stable tracking for tens of seconds while lowering a near-eye module's power draw.

0.18

WorldForge V2: Eliciting Camera-Trajectory Alignment in Video Diffusion Models

cs.CV ·2026-10-22 ·Chenxi Song, Yanming Yang, Tong Zhao, Ruibo Li, Joey Tianyi Zhou +1 more
similarity 0.63
Abstract

Video diffusion models have learned rich 3D/4D priors, making them promising for scene generation and video re-rendering. However, their use in spatial tasks is limited by imprecise camera control, spatial and temporal inconsistencies, and entangled camera motion with scene dynamics. Existing approaches, such as task-specific fine-tuning and post-process warping, often introduce visual artifacts, generalize poorly, or incur high computational costs. We propose WorldForge V2 to achieve accurate camera control while preserving the generative capabilities of pretrained video models. We first develop a training-free guidance framework using warped references to iteratively refine generation along a target camera path. Optical-flow analysis identifies motion-related latent channels for selective guidance, helping separate motion control from appearance. A dual-path strategy further compares guided and unguided predictions to correct artifacts from imperfect references. Together, these components guide viewpoint changes while preserving scene appearance and object motion. To reduce refinement costs, v-cache approximates the correction using the preceding denoising prediction, avoiding an additional model evaluation. We further extend motion localization from latent channels to network blocks and introduce Trajectory LoRA, which concentrates adaptation on blocks most responsive to trajectory guidance. A two-stage training strategy teaches these adapters to denoise the states encountered during guided generation, using limited supervision effectively. This enables reliable camera control with very little training data, with a single training scene already supporting generalization to unseen scenes. Quantitative and qualitative evaluations across multiple datasets show that our method achieves state-of-the-art generation quality and trajectory accuracy in camera-controlled video generation.

0.14