CS Paper Radar

PhysReflect: Geometry and Perception Guided Diffusion for Physically-Plausible Mirror Reflections

Shuheng Ge, Hongwei Ren, Li Zhang, Xiangqian Wu

cs.CV cs.AI ·submitted 2026-09-20 08:17 UTC · v1
top venue

Abstract

Diffusion models generate high-quality images, yet often violate the physical laws governing mirror reflections. Reflections often suffer from geometric aberrations, including positional offsets, directional misalignment, proportional imbalance, and structural distortion. These failures remain evident even in contemporary state-of-the-art generative systems. Existing methods itigate this problem through synthetic data scaling or auxiliary depth conditioning, yet their merely reliance on latent-space noise reconstruction losses as implicit supervision prevents direct enforcement of reflection-specific geometric and perceptual constraints. To bridge this gap, we present PhysReflect, a geometry and perception guided diffusion framework that decodes the predicted clean latent into pixel space at each training step and applies annealed supervision through two complementary differentiable objectives. The Geometric Loss enforces mirror-induced spatial consistency through sparse epipolar correspondence and dense boundary projection alignment, where a SAM2-based TwinTrack mechanism provides stable in-mirror localization for boundary-aware supervision. The Perceptual Loss preserves reflected appearance by combining Semantic Consistency Loss, which maintains reflected identity and appearance via DINOv2 features, and Lighting Consistency Loss, which regularizes depth, surface-normal, and illumination coherence under monocular geometry priors. Experiments on synthetic and real-world benchmarks show that PhysReflect outperforms prior mirror-reflection methods in geometric, perceptual, and physical-plausibility metrics, as well as qualitative visual results.

Closest papers

Nearest neighbours by meaning across the whole index.

Fill My Mirror: Geometry-Constrained Mirror Inpainting

cs.CV ·2026-09-03 ·Ofek Basson, Shimon Vainer, Yacov Hel-Or, Ohad Fried
similarity 0.77
Abstract

Mirrors are common in real-world images, yet producing geometrically consistent reflections with generative models remains challenging. Unlike most objects, mirror appearance depends on scene geometry and viewpoint, making it hard to synthesize using learned appearance priors alone. We address this in the mirror inpainting setting, where the scene is fixed and only the mirror region is generated. Our key insight is that much mirror content is geometrically constrained by the visible scene and need not be hallucinated. We estimate scene geometry and project visible content into the mirror to recover reflection regions determined by geometry. A generative model then completes the mirror region via a two-mask diffusion strategy balancing geometric constraints with the model's learned priors, reducing projection artifacts and improving reflection consistency. The method is training-free and applicable to complex real-world scenes. We evaluate on MirrorBench-V2 (synthetic) and real images. Using standard and geometry-aware metrics, we show that explicitly using scene geometry improves consistency.

0.22

Reflection-aware Generative Novel View Synthesis

cs.CV cs.AI ·2026-09-04 ·GeonU Kim, Shin Dong-Yeon, Tae-Hyun Oh
top venuecode/data similarity 0.76
Abstract · ECCV2026, Project page: https://kim-geonu.github.io/Ref-GeNVS/

We propose Ref-GeNVS, a training-free, reflection-aware method for generative novel view synthesis (NVS) in mirror scenes. Existing multi-view diffusion models often fail to recognize the mirror in the scene and cannot exploit reflected content for scene generation. To fix this issue without additional training, our key idea is to treat a mirror image as two complementary views. From input images, we estimate the mirror plane and reflect camera poses to form virtual views. Based on this virtual view setup, we propose a two-stage generation method consisting of Mirror-gated attention and Reflection injection, which enables reflection-consistent NVS by explicitly leveraging reflection relationships in a multi-view diffusion model. Ref-GeNVS inherits the strong generalizability of the multi-view diffusion backbone, while it does not require finetuning. On synthetic and real scenes including mirrors, Ref-GeNVS outperforms recent generative NVS methods by generating reflection-consistent and contextually coherent novel views, revealing scene structure visible only through mirrors. Project page: https://kim-geonu.github.io/Ref-GeNVS/

0.49

GeoVerse: World-Consistent Novel View Synthesis in Geometric Latent Space

cs.CV ·2026-09-28 ·Kerui Ren, Tao Lu, Linning Xu, Changjian Jiang, Mu Huang +3 more
code/data similarity 0.70
Abstract · Project Page: https://geoverse-nvs.github.io/

Novel view synthesis from sparse images must reconcile faithful reconstruction of observed regions with plausible completion of unseen content, while maintaining world consistency across viewpoints. Existing geometry-based methods preserve observed scene structure but often struggle to complete unseen regions, whereas video generative models offer rich appearance priors but accumulate inconsistencies during sequential view generation. We propose GeoVerse, a framework that synthesizes world-consistent novel views by performing generation within the geometric latent space of a pretrained 3D foundation model and injecting appearance priors from a video generative model. Specifically, GeoVerse extracts multilevel features from Wan2.2 VACE and injects them into the geometric latent diffusion model via a ControlNet-style adapter, incorporating video-learned appearance priors to enhance structural completion. To enforce cross-view coherence, a global spatial memory continuously aggregates observed and synthesized content, reprojecting target-aligned guidance to anchor subsequent predictions to a shared scene representation. Extensive experiments across diverse datasets demonstrate improved visual quality and geometric consistency, with a 2.23 dB higher PSNR on DL3DV and 32.4% lower ATE on Mip-NeRF360 compared to GLD.

0.27

OptiGeo: Efficient Monocular Geometry for Embodied Perception in Optically Challenging Scenes

cs.CV ·2026-08-30 ·Muxin Liu, Tianbo Liu, Jing Xia, Xiaoyang Lyu, Xiaoshan Wu +5 more
publishedcode/data similarity 0.67
Abstract · Accepted at CoRL 2026. Project page: https://mx-liu6.github.io/OptiGeo-web/

Monocular depth estimation has achieved strong open-domain generalization, yet reliable robotic deployment remains difficult in transparent, reflective, and specular environments, where depth sensors often produce missing or biased depth. Existing methods often handle such optical failures with scene-specific preprocessing, auxiliary modules, or post-hoc fine-tuning. While effective in constrained settings, these designs increase architectural redundancy and can over-specialize general geometry models to narrow optical scenarios. We revisit this problem as a localized failure mode within base-model training and identify sensor-induced supervision bias as a key bottleneck: models inherit sensor failure patterns from biased real-depth supervision in optically challenging regions. We then introduce OptiGeo, a bias-aware training framework that rehabilitates biased real supervision using a clean-geometry teacher and residual-trimmed alignment. We redefine transparency-targeted rendering as a compact source of clean optical geometry, rather than a large domain-specific fine-tuning set. With only a small targeted rendering set, OptiGeo learns the geometric structure of transparent objects and regions, correcting local geometry distortions that real sensors cannot reliably supervise. Despite only 30M parameters, OptiGeo outperforms substantially larger 300M-scale monocular models and billion-scale multi-view baselines on transparent-scene benchmarks, while remaining competitive on general zero-shot depth and boundary sharpness. Real-world navigation cases further validate its practicality as an efficient perception module in optically challenging scenes.

0.57

ReconSplat: Generalizable 3D Scene Reconstruction Beyond Observed Views

cs.CV ·2026-08-28 ·Giuseppe Stracquadanio, Kevin Raj, Julia Grabinski, Stefan Roth
top venuecode/data similarity 0.66
Abstract · ECCV 2026. Code and additional visual results are available on our project page: https://visinf.github.io/reconsplat

We introduce ReconSplat, a feed-forward model for 3D scene reconstruction that aims to address the longstanding trade-off between plausible view generation for unobserved regions and geometric consistency, providing both geometrically aligned novel views and sharp depth estimates. Our approach builds on 3D Gaussian splatting (3DGS) as an intermediate differentiable scene representation and integrates it with a multi-view latent diffusion model (MV-LDM) trained to act simultaneously as a refiner and an inpainter for appearance and scene geometry. We enforce geometric consistency by guiding the diffusion process with variational 3D latent features for appearance and geometry, encoded by the feed-forward 3DGS representation and rasterized to 2D latent space. ReconSplat produces both photorealistic novel views and accurate depth maps on real-world benchmarks, RealEstate10K and DL3DV-10K, outperforming existing methods in challenging extrapolation setups. Notably, ReconSplat allows the extrapolation of unseen and challenging viewpoints jointly with coherent and precise scene geometry.

0.59

Generative Structure from Motion with Native 3D Diffusion

cs.CV cs.AI ·2026-10-26 ·Haobin Duan, Binbin Huang, Mochu Xiang, Yiqun Zhao, Zibo Zhao +2 more
top venuecode/data similarity 0.66
Abstract · Accepted to NeurIPS 2026. Project page: https://dotb1ue.github.io/GenSfm/

Recovering an object's 3D structure and camera motion from a few uncalibrated views is a fundamental problem in computer vision. Classical structure from motion methods recover 3D geometry consistent with the input images but cannot recover unseen regions; native generation methods produce plausible 3D objects which are related but not necessarily faithful to the input images. Methods simply concatenating reconstruction and generation allow error to cascade across the two stages, instead of producing a 3D object consistent with both the distribution and the input. We propose GenSfM, which integrates image-based 3D reconstruction with a native 3D diffusion model. In particular, we use a multi-modal diffusion transformer to jointly denoise the shape latent and per-view pose latents under shared self-attention, grounding generated geometry in the observed views while using object-level priors to infer unobserved regions. A compact 3D-native UV-volume tokenization keeps the joint sequence small as views are added, and a pose-aware stage refines geometry and texture by sampling per-voxel image features at the recovered camera poses. On Toys4k and GSO, for $4$ uncalibrated views, GenSfM improves novel-view PSNR by $3.2$-$4.5$ dB and reduces median Chamfer distance by $2.8$-$3.8\times$ over a strong native-3D generation baseline, while recovering input-view poses over $96\%$ Acc@$5^\circ$ without any external pose-estimation backbone, post-hoc optimization, or known intrinsics. Project page: https://dotb1ue.github.io/GenSfm/.

0.39

UniCross3D: Unified Cross-View and Cross-Domain Diffusion for Consistent Single-Image 3D Generation

cs.CV cs.GR ·2026-11-02 ·U-Chae Jun, Jaeeun Ko, Jiwoo Kang
published similarity 0.66
Abstract

Reconstructing detailed geometry and realistic appearance from a single RGB image is essential yet fundamentally challenging due to inherent ambiguities such as occlusion, lighting variations, and texture-geometry entanglement. While recent diffusion-based generative models have significantly improved novel view synthesis, existing approaches suffer from two critical limitations: lack of cross-view geometric consistency and insufficient cross-domain semantic alignment. To address these issues, we introduce UniCross3D, a unified cross-view and cross-domain diffusion framework designed explicitly for consistent and physically coherent 3D generation. UniCross3D features two novel contributions: (1) a cross-view latent regularization that enforces cross-view geometric consistency across synthesized viewpoints by penalizing latent variance, and (2) a cross-domain mutual information objective grounded in the physics of image formation, explicitly aligning synthesized color and normal maps. Extensive experiments demonstrate that UniCross3D achieves significantly improved view consistency and semantic alignment over state-of-the-art methods and yields higher-fidelity reconstructions, particularly under challenging textures and ambiguous viewpoints.

0.47

Align3D: Image-Structure Co-Aligned 3D Scene Generation with Observability-Aware Fidelity-Preserving Guidance

cs.CV ·2026-11-06 ·Chenliang Zhou, Yifan Wang, Andrzej Banburski-Fahey
similarity 0.65
Abstract

We present Align3D, an image-conditioned diffusion model that generates 3D indoor layouts that are both faithful to a single input photograph and physically plausible beyond the observed view. From the photograph we infer a confidence-calibrated scene graph and train a set-diffusion layout denoiser with image-structure co-alignment where confidence-weighted modality fusion balances image and scene-graph alignment using predicted confidences, while observability-aware fidelity-preserving guidance projects conflicting scene-quality gradients and reweighs them with an object-level confidence mask so under-observed degrees of freedom absorb physical priors without undoing the image-graph match. On 3D-FRONT, Align3D improves image-alignment and scene-quality metrics over recent baselines; once trained, it maps previously unseen photographs to layouts in a single feed-forward pass.

0.09