CS Paper Radar

Toward GPU-Resident Climate Models: A Feasibility Study on Lossy Compression for the Spherical Harmonic Transform's Communication Bottleneck

Lorenzo Breschi, Flavio Vella

cs.DC physics.ao-ph ·submitted 2026-09-21 08:53 UTC · v1
published

Abstract

Operational pseudospectral atmospheric models such as the ECMWF Integrated Forecasting System (IFS) run today almost exclusively on CPUs; GPU ports are under active development but not yet used in production. These models rely on the Spherical Harmonic Transform (SHT). Each time-step requires forward and inverse SHTs, and both passes depend on global pencil transposition that redistribute multi-dimensional arrays across compute nodes. At large node counts these global collectives dominate wall-clock time. We investigate GPU-resident lossy compression, using representative fields from the DYAMOND high-resolution operational dataset as input, and combining measured GPU compression throughput with SimGrid network simulation, we show that ZFP at 16 bits per value (rate-16), about the same storage budget as float16, matches the communication-time reduction of float16 truncation while delivering approximately $\mathbf{1600\times}$ lower mean relative error. ZFP at 8 bits per value (rate-8) achieves approximately $\mathbf{1.93\times}$ the speedup of float16 while retaining $\mathbf{4\times}$ lower mean relative error.

Comment
Accepted for publication in the 2026 IEEE International Conference for High Performance Computing, Networking, Storage and Analysis Workshops (SC-W) - High-Performance Computing for Environmental and Earth Sciences (HPC4EES). \textcopyright 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media

Closest papers

Nearest neighbours by meaning across the whole index.

Half-precision inference of AI weather prediction models: negligible loss of skill at a fraction of the cost

cs.LG physics.ao-phcs.PF ·2026-11-06 ·Stefan Siegert
code/data similarity 0.61
Abstract · 40 pages, 15 figures, 9 tables. Code: https://github.com/sieste/ai-nwp-fp16

AI weather prediction models are released with 32-bit (fp32) weights and run in fp32 by default, although current GPUs compute much faster in 16-bit formats. We run five publicly available models -- Aurora, Pangu-Weather, FourCastNet, SFNO and FastNet -- on a single 16 GB GPU from 52 initial dates in 2024, in fp32 and with their networks in half precision (fp16), and verify the forecasts against ERA5. The physical state must stay in fp32: converting the whole model rounds it in physical units, which in fp16 overflows and in bf16 discards meaningful information. With the state, its normalisation and denormalisation in fp32, running the network in fp16 changes the global RMSE by at most 1.4%, and by about 0.5% or less for four of the five models, equivalent to less than one hour of lead time up to day 8 and at most two hours at day 10. The differences show no systematic pattern by region, scale or for tropical and extratropical storms, apart from a small tropical penalty in FourCastNet, and fp16 leaves the CRPS, spread and calibration of Aurora's ensemble almost unchanged. No value overflowed fp16's numeric range (+/-65,504); the largest stay 38 to 544 times below it. A 10-day forecast in fp16 is 1.3-3.5 times faster than in fp32 and uses 1.4-3.7 times less energy. Sensitivity experiments show that rules of thumb from other applications of reduced precision carry over only partly: the first and last layers dominate for some models but not for others, and no type of layer is sensitive on its own. For running AI weather models on a single GPU, fp16 with the state in fp32 is practically lossless at a fraction of the cost. bf16, often preferred for its wider range, is as fast but less accurate than fp16 for every model, and simple 8-bit quantisation costs far more skill.

0.28

FaCTz: Fast Critical-Point and Topology-Aware GPU Compression for Scientific Vector Fields

cs.DC ·2026-08-11 ·Mingze Xia, Yuxiao Li, Sheng Di, Jiannan Tian, Baixi Sun +4 more
similarity 0.59
Abstract

Error-bounded lossy compression is essential for storing and transferring the vector-field data produced by large-scale scientific simulations. Although it enforces a user-specified error bound to limit numerical distortion, it does not preserve the field's topology: small admissible perturbations can create or eliminate critical points on which downstream feature analysis depends. Existing GPU compressors achieve high throughput but are topology-agnostic, whereas the only compressor with provable critical-point preservation (cpSZ) runs on the CPU at throughput far below the data-generation rates of modern GPU-based systems. We observe that, although preserving critical points is inherently a coupled and sequential constraint, it can be reformulated into independent parallel tasks, either on a per-block basis or, speculatively, on a per-point basis. We present FaCTz, the first GPU-based error-bounded lossy compressor that guarantees critical-point preservation. FaCTz provides a block-wise mode optimized for throughput and a speculative per-point mode optimized for compression ratio. Across three vector-field datasets, FaCTz preserves every critical point while achieving throughput of up to 60 GB/s, approximately two orders of magnitude (up to approximately 640x) faster than the multithreaded CPU implementation of cpSZ. Its speculative mode further improves the compression ratio by approximately a factor of two over the throughput-oriented mode.

0.04

Falcons: Pushing the Speed-Ratio Limits of Lossy Compression for Parallel Scientific Applications

cs.DC ·2026-10-30 ·Bing Lu, Jinyang Liu, Xinyang Ma, Quantong Fu, Chenwei Hou +11 more
similarity 0.58
Abstract

The extreme volume of scientific data has become a critical challenge for modern exa-scale scientific computing applications, and error-bounded lossy compression remains indispensable for scientific data management due to its high data reduction rate and controllable data fidelity. However, to ensure sufficient data reduction, existing compressors incur prohibitive computational overheads in real-world parallel scientific computing applications. To overcome the performance bottlenecks of error-bounded lossy compression, we present \textbf{Falcons}, a broadly deployable error-bounded lossy compressor that simultaneously achieves \textbf{high compression ratios with ultra-fast throughput, minimizing the overhead in parallel scientific applications}. Falcons integrates three key designs: memory-regularized interpolation with SIMD (Single Instruction Multiple Data) vectorization, distribution-adaptive lossless coding, and application-oriented optimizations for multiple parallelization schemes. Across our evaluations on cutting-edge supercomputers, Falcons clearly outperforms state-of-the-art compressors, simultaneously achieving up to 29\% compression ratio improvement and 255\% throughput improvement. In case studies of real-world applications, Falcons accelerates large-scale parallel data I/O and remote transfer by up to 44.6\% and 51.5\%, and provides 1.55$\times$ end-to-end speedup for the full WRF (Weather Research \& Forecasting) application workflow.

0.08

BlockMGARD: Accelerating Adaptive Scientific Data Reduction with Region-of-Interest Error Control on GPUs

cs.DC ·2026-08-31 ·Yanliang Li, Qian Gong, Qing Liu, Jaemoon Lee, Norbert Podhorszki +3 more
similarity 0.57
Abstract

The growing scale of scientific data makes lossy compression essential for reducing data volume under controllable error. Transformation-based compressors using multilevel decomposition, such as MGARD, achieve strong compression ratios but map poorly to GPU architectures. We propose BlockMGARD, an adaptive, Region-of-Interest (ROI)-supported GPU lossy compressor, with four contributions: (1) an In-cache Block decomposition leveraging GPU on-chip memory and constant lookup tables to accelerate decomposition; (2) a hybrid hierarchy combining In-cache Block and global decomposition to balance speed and compression ratio; (3) an end-to-end pipeline with fine-grained ROI error control for feature preservation; and (4) an evaluation against state-of-the-art methods on five real-world datasets. Compared to MGARD-X, BlockMGARD achieves up to 4.2x and 9.1x higher compression and decompression throughput, and up to 8.63x higher compression ratio than uniform-tolerance baselines under ROI-aware error control. Across four GPUs, BlockMGARD achieves near-ideal linear scaling and up to 1.58x I/O cost reduction over MGARD-X.

0.23

TERRA-NG v1.0: Extreme-Scale, GPU-accelerated Mantle Convection

cs.CE ·2026-09-18 ·Fabian Böhm, Nils Kohl, Ponsuganth Ilangovan, Gabriel Robl, Fatemeh Rezaei +5 more
benchmark similarity 0.57
Abstract

We present TERRA-NG, a portable, GPU-accelerated, matrix-free mantle-convection code. A single Kokkos C++ implementation runs at scale on NVIDIA, AMD, and Intel GPU supercomputers. TERRA-NG has a deliberately narrow design: built on a radially extruded mesh of spherical wedges, tailored to the spherical shell geometry, which enables domain-specific optimizations like single quadrature-point integral-evaluations, radial coordinate storage compression and radial shared-memory tiling. The corresponding low-order $W_1$-iso-$W_2/W_1$ wedge-based Stokes--energy discretisation is verified against the Zhong et al.(2008) spherical-shell convection benchmark suite. We showcase TERRA-NG through strong- and weak-scaling on the JUWELS Booster (NVIDIA A100), MareNostrum 5 (NVIDIA H100), LUMI-G (AMD MI250X), Hunter (AMD MI300A APU), and SuperMUC-NG Phase 2 (Intel PVC) supercomputers. Coupled mantle convection simulations at $\sim\!11$ km and $\sim\!5.6$ km radial spacing ($\sim 2.8$ B and $\sim 22$ B DoFs) can be run routinely on standard node partitions of all considered systems. Global $\sim\!1$ km-per-gridpoint mantle convection ($\sim 1.4$ T DoFs) is feasible on an extreme-scale allocation, and a sub-km hero-run at $\sim\!0.7$ km grid spacing scaling up to $\sim 11,000$ GPUs of LUMI-G ($\sim 11$ T DoFs) shows the potential of the code on future, larger machines.

0.52

What Bloats Your Floats? Right-Sizing Numerical Precision for Scientific Computing

cs.DC ·2026-10-06 ·Pratyai Mazumder, Alexandru Calotoiu, Marcin Copik, Yakup Koray Budanaz, Shriram Chandran +1 more
published similarity 0.57
Abstract · Accepted at SC '26: The International Conference for High Performance Computing, Networking, Storage, and Analysis, November 15-20, 2026, Ch…

While FP64 (binary64) remains the standard representation of real numbers in scientific computing, hardware trends increasingly favor low-precision formats optimized for AI workloads. This shift prioritizes throughput and energy efficiency over full-precision capabilities. We challenge the necessity of high-precision arithmetic in PDE-governed simulations, where spatial and temporal discretization errors introduce a physical noise floor that masks the lower-order bits of the FP64 format, rendering them irrelevant. We propose a criterion based on the Signal-to-Noise Ratio (SNR) with respect to spatial and temporal refinements to evaluate the impact of safe precision reduction on scientific computations. Finally, we present an automated dataflow-centric workflow for targeted lowering within mixed-precision subgraphs in complex scientific applications. Large-scale evaluations of weather and climate applications show that strategic precision reduction on GPUs achieves up to 1.8x speedup without compromising physical fidelity.

0.36

PointZip: Statistically Lossless Compression for Climate Data with Pointwise Error Bounds

cs.CE ·2026-11-16 ·Jiayong Li, Pratyai Mazumder, Yuejiang Yu, Langwen Huang, Alexandru Calotoiu +1 more
similarity 0.57
Abstract · 12 pages, 11 figures

High-resolution climate simulations generate data volumes that increasingly strain storage, I/O, and data dissemination. Error-bounded lossy compressors can reduce these costs, but their tolerances are usually user-chosen and difficult to standardize across heterogeneous climate datasets. We address this limitation with statistically lossless compression, where the pointwise compression error is bounded by the pointwise data uncertainty. We propose PointZip, a two-stage compressor that combines a rate-distortion-efficient base layer with error-bound-aware residual coding to enforce pointwise guarantees. On outputs from the widely used climate modeling framework ICON, PointZip makes 1km simulations practical by reducing storage bandwidth requirements by 72x. On the ERA5 climate dataset, PointZip reaches 69.3x on the most representative variables, reducing the commonly used subset to 4 TB. In downstream evaluations, PointZip preserves data spectra, extreme events, and air parcel trajectories, while increasing neural weather forecast RMSE by less than 1%, with negligible impact on the Fractions Skill Score (FSS).

0.40

TERRA: A Hierarchical Parallel Training and Memory Orchestration Framework for High-Resolution AI-based Earth Modeling

cs.CV cs.DC ·2026-08-15 ·Ruohan Wu, Ziqi Zhu, Yang Zhao, Jiarui Tang, Yingzhe Cui +4 more
code/data similarity 0.57
Abstract · 15 pages, 16 figures, 6 tables, and 2 algorithms. Submitted to IEEE Transactions on Parallel and Distributed Systems (TPDS). Code is availab…

Training high-resolution AI-based Earth forecasting models is memory-intensive. Window-based Swin Transformers reduce the quadratic cost of global attention, but existing distributed systems such as AERIS primarily target pixel-level models and do not jointly support convolutional sampling modules and shifted-window execution. Long-lead rollout finetuning further increases activation memory. To address these challenges, we present TERRA, a hierarchical parallel training framework for high-resolution Earth forecasting. TERRA introduces Sampling-Aware Window, Sequence, and Tensor Parallelism (SAWSTP), which preserves spatially contiguous layouts for sampling modules and routes tokens into topology-aware ragged window layouts for Transformer execution. For long-lead finetuning, Memory Orchestration (MO) provides rollout-aware checkpoint planning and combines input buffering with budget-constrained activation offloading. Experiments on the $1/12^\circ$ GLORYS-based Wenhai workload show that TERRA supports models with up to 11.4B parameters on 96 H200 GPUs and sustains up to $39.76$ PFLOPS, achieving $65.0\%$ strong-scaling and $94.1\%$ weak-scaling efficiency. Compared with checkpoint-only policies, MO further reduces peak allocated GPU memory by $32.2\%$--$51.8\%$ with at most $20.0\%$ step-time overhead, which makes finetuning with smaller patch sizes and longer rollouts feasible for improved forecasting accuracy.

0.32