CS Paper Radar

Adapting Boltz-2 with limited experimental activity data improves early enrichment in virtual screening

Kairi Furui, Masahito Ohue

cs.AI q-bio.BMcs.LGq-bio.QM ·submitted 2026-09-21 09:02 UTC · v1

Abstract

Virtual screening aims to prioritize active compounds from large chemical libraries within a limited experimental budget. When applying Boltz-2 to virtual screening, a key challenge is how to use limited experimental data from the target assay to improve the prioritization of active compounds. We investigated whether fine-tuning the Boltz-2 affinity heads with a small number of binary activity labels could improve early enrichment of active compounds in hit discovery. We compared fine-tuning with 40-300 labels in a retrospective evaluation on eight MF-PCBA targets. With 300 activity measurements, fine-tuning increased the number of actives in the top 1% by a geometric mean of 1.77-fold across the eight targets and improved average precision (AP) by 2.14-fold relative to the control without fine-tuning. We also investigated whether rescoring a subset of candidates could retain the improvement in hit recovery by reranking only the top-ranked Boltz-2 candidates with the fine-tuned head. Restricting rescoring to approximately 10% of the evaluation set retained hit recovery comparable to full rescoring. These findings show that affinity-head fine-tuning with limited activity labels improves early enrichment with Boltz-2 and that this benefit can be retained when rescoring a restricted set of candidates.

Closest papers

Nearest neighbours by meaning across the whole index.

TopU-LBVS: A Realistic Multi Target Benchmark for Ligand Based Virtual Screening

cs.LG cs.AI ·2026-09-24 ·Surbhi Kumar, Yuhe Zhou, Varun Shiralkar, Niu Huang, Baris Coskunuzer
benchmarkcode/data similarity 0.68
Abstract · 75 pages

Ligand-based virtual screening (LBVS) is a practical first-pass tool in early-stage drug discovery, but existing benchmarks can overestimate performance through random negatives, easy decoys, limited target coverage, and non-standardized evaluation protocols. We introduce TopU-LBVS, a multi-target benchmark for LBVS under hard-negative screening conditions. Starting from curated ChEMBL~35 bioactivity data, TopU-LBVS covers 93 protein targets across 7 protein classes and constructs target-specific screening libraries with property-matched, structurally similar decoys at a fixed 1:40 active-to-decoy ratio. Libraries contain roughly 400 to 10,000 compounds and are designed to reduce simple physicochemical and nearest-neighbor fingerprint shortcuts. TopU-LBVS provides three fixed protocols. TopU-LBVS-full evaluates ChEMBL$^\ast \rightarrow$ TopU generalization across all 93 targets. TopU-LBVS-low evaluates low-data TopU $\rightarrow$ TopU learning within the hard-negative distribution. TopU-LBVS-mini provides a compact seven-target protocol with a paired random-decoy control that changes only the test decoys, enabling low-cost development and direct measurement of the gap between random ChEMBL$^\ast$ and TopU decoys. Across ten reference baselines spanning fingerprint methods, molecular GNNs, fingerprint hybrids, and modern molecular models, performance under random-decoy evaluation degrades sharply under hard-negative screening. We release data, fixed splits, evaluation code, and baseline implementations for reproducible comparison of future LBVS and molecular representation learning methods. Code and data are available at https://github.com/topu-benchmark/topu-lbvs and https://huggingface.co/datasets/topu-benchmark/topu-lbvs.

0.38

PETA:Parameter-Efficient Test-Time Adaptation for Virtual Screening

cs.LG ·2026-08-20 ·Jia-Qi Lin, Yinghua Yao, Chang-Dong Wang, Yew-Soon Ong, Yuangang Pan
similarity 0.65
Abstract

Accurately ranking active ligands for a target protein pocket from massive chemical libraries remains a central challenge in virtual screening. DrugCLIP and its recent extensions substantially accelerate this process by encoding protein pockets and molecules into a shared embedding space. Despite this progress, further performance improvements typically require retraining the entire model, incurring substantial computational overhead and making target-specific customization inefficient. In this work, we formulate the specialization of pretrained virtual screening models to individual pockets as a test-time adaptation problem and propose PETA, a parameter-efficient framework that directly adapts pretrained model at test time. Given a target pocket, PETA constructs pocket-specific negatives through molecular diffusion and chemical validity filtering, and further moves them toward the reference ligand retrieved from structural databases via embedding-space mixup to create more challenging ranking tasks. A ranking objective then places greater emphasis on suppressing high-scoring invalid candidates that could contaminate the top-ranked screening results, providing structured supervision for lightweight adaptation. Experiments across diverse benchmarks demonstrate that this lightweight, pocket-specific adaptation outperforms both pretrained and fully retrained baselines while updating only the LayerNorm parameters, which account for approximately $0.03\%$ of the full model.

0.16

D2ML: Models for Direct-to-Biology Small Molecule Screening

cs.LG q-bio.BM ·2026-10-29 ·AkshatKumar Nigam, Neri Amara, Hillary Dequina, Dyana Kenanova, Seth Malmersjo +5 more
published similarity 0.63
Abstract · NeurIPS 2026 Workshop on AI for Drug Discovery (AI4DD)

Direct-to-biology (D2B) screening enables rapid testing of newly synthesized molecules without purification. However, uncertain concentrations in crude mixtures and limited purified-compound measurements complicate the use of these data in machine learning. Here we show that models tailored to the structure of D2B data can improve prediction and guide the discovery of more potent and selective compounds. Our assay-aware models predict activity from single-point screens, relative potency across targets from crude dose-response assays, and absolute potency from purified-compound measurements. For crude assays, potency ratios between targets tested from the same well can retain selectivity information despite uncertain concentrations. A joint model that shares information across stages and balances their contributions to training improved predictions over separate neural networks. The largest gain was in crude dose-response selectivity prediction, where rank correlation increased from 0.27 to 0.40. In a separate experiment, independently trained models guided the selection of 84 new compounds to improve ROS1 potency while limiting activity against the anti-target TRKB. Synthesis and testing identified compounds that extended the measured Pareto front, achieving better combinations of potency and selectivity than those in the training data. The most selective new compound achieved a ROS1 IC50 of 14.7 nM and 233-fold selectivity over TRKB. By comparison, the most selective training compound had a ROS1 IC50 of 20.3 nM and 79-fold selectivity. ATLAS provides the experimental setting for this approach, supporting synthesis and screening of 1,000-10,000 model-selected compounds in two- to three-week cycles. Together, these results show how assay-aware learning can use the full D2B assay sequence to guide multi-objective molecular optimization.

0.16

Deploying DeepSeek 175B Locally on a Single Consumer-Grade RTX 4060 Laptop with 32GB RAM for 200k-Scale Protein-Ligand Virtual Screening

cs.LG ·2026-08-31 ·Rui Xiao, Yili Xu
similarity 0.62
Abstract

Recent advances in large language models (LLMs) have demonstrated exceptional performance in protein-ligand interaction prediction, but state-of-the-art pipelines for large-scale virtual screening almost exclusively rely on high-end GPU clusters with hundreds of gigabytes of memory, creating prohibitive hardware barriers for small academic teams. In this work, we present a fully local low-resource framework that deploys the 175-billion-parameter DeepSeek 175B LLM on a single consumer-grade RTX 4060 laptop equipped with 32GB system RAM and 8GB VRAM, completing a full 200k-scale protein-ligand virtual screening workflow across 20 distinct protein targets. Our implementation achieves 100x throughput of an 8-card A100 cluster baseline under identical task configurations within 72 hours, with an average binding affinity prediction error of 0.88 kcal/mol across all targets, satisfying the 1.0 kcal/mol chemical accuracy requirement for preclinical drug discovery. Systematic runtime profiling reveals that heterogeneous memory management overhead accounts for 72% of total execution time, while accuracy loss introduced by model optimization contributes less than 10% to total prediction error. This work validates the engineering feasibility of running industrial-scale trillion-parameter LLM-driven biomedical computing tasks on consumer hardware, establishing a new low-barrier paradigm for AI-powered early stage drug discovery.

0.25

From Benchmarks to the Bench: Preference, Correspondence and Selectivity in Bidirectional Drug-Target Screening

cs.LG ·2026-11-19 ·Jiangjie Qiu, Chengrui Xu, Xiaonan Wang
benchmark similarity 0.61
Abstract · 18 pages, 5 figures and 1 table

Identifying active molecules for known targets and potential targets for existing drugs is central to drug discovery and repurposing. Drug-target interaction (DTI) models can rank vast numbers of drug-target pairs, but limited experimental capacity restricts testing to a small number of candidates. We compared the bidirectional recommendations of 13 released systems across 711 molecular structures of FDA-approved drugs and 614 human proteins. For the same target or drug, pairs of models produced completely disjoint Top-10 molecule and protein lists in 77.8% and 70.1% of comparisons, respectively. Even where recommendations overlapped, agreement between some systems largely reflected recurring preferences for the same candidates. Published inhibition measurements for 79 molecules and 65 kinases revealed that some systems enriched active candidates, yet their hit yields changed little when recommendations were matched to different drugs or targets, whereas other systems lost substantially more hits. Some of the former systems also rarely ranked both molecules and kinases correctly when two drugs favoured different kinases. We further retrained the same architecture on the same data, with the training objective fixed and random seeds varied. Despite similar test performance, mean pairwise Top-10 overlap on a separate screening catalogue was about two candidates. Our study moves DTI model evaluation beyond benchmark performance to assess whether model predictions can guide meaningful experimental decisions in drug discovery and target identification.

0.15

SpecOpt: Contact-Diff Reasoning for Agentic Molecule Optimization Toward Binding Specificity

cs.AI ·2026-09-18 ·Thao Nguyen, Heng Ji
benchmark similarity 0.58
Abstract

Off-target protein binding is a major source of adverse effects for small-molecule drugs, yet most structure-based molecular design methods focus on generating selective compounds de novo rather than improving the selectivity of existing, well- characterized drugs. We introduce specificity optimization (SpecOpt), a molecular design task that seeks constrained structural modifications to an existing compound that increase its binding preference for an intended target over known off-targets while preserving its structural identity and drug-like properties. To enable systematic evaluation, we construct a ChEMBL-derived benchmark from compound-target interaction data, identifying intended targets through curated drug-mechanism annotations and off- targets through measured activities. We then develop an agentic framework that docks each compound against its intended target and off-targets, compares the resulting poses through residue-aware atom-protein contacts, and provides these differential interactions to a large language model to propose targeted structural modifications. Candidates are retained only if they satisfy molecular similarity, ADMET, and target-off-target docking selectivity criteria. On 915 compounds, the agent improves the target- off-target binding gap for 84.8% of compounds, shifting the mean gap from -0.72 to +0.47 kcal/mol while maintaining a mean Tanimoto similarity of 0.72 to the starting compounds. Ablation studies identify residue-specific contact information as the critical optimization signal: replacing residue identities with binary contact indicators eliminates improvement on all 29 ablation compounds. These results establish SpecOpt as a distinct molecular design problem and demonstrate residue-aware differential interactions as an effective signal for improving the specificity of existing compounds.

0.08

Beyond Fixed Acquisition Functions: Temporal Difference Active Learning for Perturbation Discovery

cs.LG ·2026-10-15 ·Xudong Zhang, Jianzhe Li, Yitong Tang, Peijie Zhou
similarity 0.58
Abstract · 41 pages, 8 figures (including appendices)

Genetic and drug perturbation screens are important tools for elucidating disease mechanisms and validating therapeutic targets, but experimental costs limit the number of candidates that can be tested. Existing perturbation screening methods typically update the surrogate model with feedback while keeping the acquisition function fixed, limiting their ability to adapt selection to different response landscapes. Experimental feedback reveals current hits and informs subsequent selection by updating candidate predictions, providing a training signal for learning how to select experiments. We formulate budgeted perturbation discovery as a sequential decision problem and propose Temporal Difference Active Learning (TDAL), which learns an acquisition function online through temporal difference learning from a single screening trajectory, accounting for current hits and future discoveries. TDAL uses the Hellinger distance between hit probabilities for unmeasured candidates before and after an experiment to weight successor value, and reuses measured outcomes through leave-batch-out (LBO) to construct virtual transitions and alleviate training data scarcity. Across eight public screens spanning single, double, and triple perturbations under varied experimental configurations, TDAL achieves an average rank of 1.63 among eleven methods and ranks first on four tasks, demonstrating its adaptability across response landscapes.

0.27

Predicting Dose-Response Success from Primary Screening Data

cs.LG q-bio.BM ·2026-08-27 ·Sean Lim
similarity 0.58
Abstract · Format changed. Some information added

High-throughput drug screening uses inexpensive primary screens to select compounds for more costly follow-up dose-response experiments, which estimate compound potency (pXC50) by determining the concentration required to produce a specified biological effect. However, many promoted compounds fail to yield a reportable potency, even when activity is subsequently confirmed. We investigated whether inexpensive three-point primary-screening data could predict whether a more costly 11-point dose-response experiment would yield a reportable pXC50. Using a dataset of 32,971 compound-assay pairs with three-point primary-screening and 11-point dose-response measurements, we trained random-forest models to predict successful potency quantification. Our model achieved an AUROC of 0.939 +/- 0.002 and generalized to previously unseen chemical scaffolds and assay-mechanism families. We found that primary-screen response features were more predictive of dose-response quantifiability than molecular structure-based features. Successful potency quantification was also strongly associated with primary-screen response amplitude. Across eight chronological test releases, the model retrospectively retained 90% of reportable potencies while selecting only 55.7% of historically promoted compound-assay pairs for follow-up profiling. These findings suggest that predicting potency quantifiability from primary-screening data could improve the efficiency of compound prioritization and reduce unnecessary dose-response experiments.

0.17