CS Paper Radar

TACIT: Tactile Contact Supervision for Spatial Attention in Dexterous Manipulation

Yanhou Lai, Fucai Zhu, Ruiqiang Wang, Koichi Hashimoto

cs.RO ·submitted 2026-09-21 12:47 UTC · v1
benchmark

Abstract

Visuomotor policies trained from a few demonstrations may reproduce demonstrated trajectories without reliably following changes in object position. Existing approaches with explicit attention typically obtain spatial priors from human annotation or visual models. We introduce TACIT (tactile contact informs attention), which uses measured tactile contacts from teleoperated demonstrations to supervise spatial attention without additional point annotation. Gaussian targets over preceding camera point clouds supervise an attention head whose pooled output conditions a visuotactile diffusion policy. Targets are used only during training; tactile observations remain inputs at inference. In the primary real-robot benchmark, with ten demonstrations per task and five demonstrated placement regions, TACIT achieves 66.7% success on ball placement and 73.3% on peg insertion, compared with 10.0% and 20.0% for input-matched 3D visuotactile fusion and 20.0% and 43.3% for vision-only DP3. TACIT enters the 150 mm palm-to-object approach region within 12 seconds in all 30 trials per task; all remaining failures occur after arrival. Across three training seeds on real ball and simulated peg, TACIT outperforms input-matched fusion and an architecture-matched control without explicit attention supervision, supporting the contribution of supervision beyond branch capacity. Pre-contact and contact-time supervision show no consistent ordering. These results demonstrate that measured tactile contact provides effective spatial supervision for approach behavior from few demonstrations within the evaluated workspace.

Closest papers

Nearest neighbours by meaning across the whole index.

Visuo-tactile Diffusion Policy for Robotic Manipulation with Auxiliary Tactile Dynamics Prediction

cs.RO ·2026-11-02 ·Kaihong Ouyang, Zihao Su, Chengxuan Zheng, Weiyi Lai, Dong Zhou
published similarity 0.80
Abstract · 7 pages, 2 figures. Presented at ICCSSE 2026

Long-horizon robotic assembly requires reliable perception and action across grasping, alignment, and insertion. Vision captures global object pose and scene context, where as fingertip touch provides local contact cues that are especially useful as contact states change. We present a visuotactile diffusion policy that combines four-step histories from two camera views and two fingertip tactile images to condition action-sequence generation. A recurrent temporal representation integrates recent observations from both modalities. To encourage it to capture how contact evolves under action, an auxiliary objective predicts fingertip-image changes two steps ahead from the temporal representation and demonstrated actions. This objective is used only during training and adds no inference-time computation. Across three independent training seeds in MuJoCo assembly experiments, the full model achieves an average success rate of $59.0\% \pm 2.6\%$, improving on the visual-only baseline ($42.7\% \pm 1.5\%$) by 16.3 percentage points.

0.27

SimpleTouch: Can Vision-Language-Action Models Master Contact-Rich Manipulation Without Tactile Policy Pretraining?

cs.RO ·2026-10-02 ·Chen Yang, Linzhe Shi, Changjie Wu, Hang Zhang, Ronghan Chen +5 more
code/data similarity 0.79
Abstract · 27 pages, 11 figures

Tactile sensing provides essential contact information for robotic manipulation, yet incorporating it into pretrained vision-language-action (VLA) models remains challenging. A common concern is that simply introducing touch during task-specific fine-tuning may fail to bridge the cross-modal gap, yielding limited gains or even reduced success. Consequently, existing methods often rely on large-scale tactile policy pretraining or separate visuotactile alignment, adding data requirements and training stages. We introduce SimpleTouch, a simple VLA extension that augments $π_{0.5}$ with a tactile expert, to test whether these additional stages are necessary. Leveraging all tokens from a frozen pretrained tactile encoder, the expert learns from action supervision and multi-horizon prediction of future tactile latents. This single-stage training uses only task demonstrations, without additional tactile policy pretraining or separate alignment. With 50 demonstrations per task, SimpleTouch achieves the highest success rate among evaluated methods on all six UniVTAC tasks. Its average success rate reaches 77.5%, compared with 45.2% for FTP-$π_{0.5}$ and 66.7% for FTP-1, corresponding to gains of 32.3 and 10.8 percentage points, respectively. Across four real-world tasks, it averages 71.3%, exceeding FTP-1 by 8.8 percentage points. These results demonstrate that, given pretrained VLA and tactile representations, additional tactile policy pretraining is not a prerequisite for strong performance on these tasks, offering a simpler route to contact-rich manipulation. Project page: https://simpletouch-robot.github.io/

0.53

TacZero: Training-Free Peg Insertion Using a General-Purpose Vision-Language Model with Tactile Feedback

cs.RO ·2026-10-06 ·Kazutoshi Tanaka
similarity 0.78
Abstract · 8 pages, 4 figures

Robots that autonomously determine their actions from language instructions and sensory observations could perform new contact-rich manipulation tasks without task-specific training or hand-designed rules. To perform these tasks, robots must infer how objects contact one another and move as a result, then select actions. For contact inference and action selection, prior approaches involve designing estimation models and tactile feedback control laws, or learning models for object-motion estimation, action-outcome prediction, and action selection from tactile data. Instead, we propose TacZero, which uses a pretrained general-purpose vision-language model (VLM) to interpret visual and tactile observations and select robot actions without additional tactile or manipulation training or task-specific rules for contact interpretation or action selection. TacZero provides the VLM with camera images, robot state, and three-axis tactile responses represented as numerical values or vectors overlaid on the images. From these observations and interaction history, the VLM generates commands specifying target end-effector positions and gripper opening or closing, which a low-level controller executes. In real-world cylindrical-peg insertion experiments, TacZero succeeded in 15 of 20 trials with numerical tactile input, compared with 10 of 20 without tactile input. This study provides a concrete starting point for further research on contact-rich manipulation using general-purpose VLMs and highlights challenges in pursuing this direction.

0.40

PredTac: Learning Contact-Rich Manipulation with Predicted Touch

cs.RO ·2026-09-14 ·Weijia Fan, Daqiang Guo
similarity 0.77
Abstract · 8 pages, 4 figures

Contact-rich manipulation benefits from tactile feedback, yet physical tactile sensors introduce hardware, calibration, synchronization, and maintenance costs that complicate policy learning and deployment. We formulate predicted touch as an alternative to measured tactile input and present PredTac, a framework that learns to infer tactile states from causal visual observations and robot states and uses the predicted touch as an explicit interface for policy learning and execution. A tactile predictor is first trained with tactile supervision and then used to provide contact information without requiring measured tactile input during downstream policy training or execution. We evaluate PredTac across three contact-rich manipulation tasks in simulation and on a real robot, and further examine how policy performance depends on the predicted contact content. In simulation goal-offset evaluations, predicted-touch policies achieve 27.0%, 52.0%, and 44.7% success on USB, Barbed-spike, and Valve, respectively, improving over the visual baseline by 8.0-13.7 percentage points. On the real robot, predicted-touch ACT achieves 70.0%, 50.0%, and 90.0% success on USB insertion, Barbed extraction, and Valve rotation, respectively, with a three-task mean of 70.0%, approaching measured-touch ACT at 72.2% and substantially outperforming visual ACT at 21.1%. Fixed-policy interventions further show that performance is sensitive to the spatial structure of predicted contact, with spatial rearrangement at fixed value distributions reducing Valve success by 10.7 percentage points. These results demonstrate that predicted touch can provide useful contact information for contact-rich manipulation without requiring tactile sensing as a policy input.

0.25

Spark-0: Scaling Spatially Aligned Tactile Pretraining for Robot Dexterous Manipulation

cs.RO ·2026-10-15 ·Tianxing Chen, Wenwei Lin, Chuqiao Lyu, Peicheng Xiang, Junyuan Tang +17 more
benchmark similarity 0.77
Abstract · Website: https://xsparkai.com/Spark-0

Generalist robot policies benefit from large-scale visual pretraining but often struggle with contact-rich dexterous manipulation, where force, compliance, and incipient slip are hard to observe from images. We present Spark-0, a spatially aligned vision-tactile-language-action (VTLA) model that uses touch in two complementary ways. During pretraining, image-space contact maps derived from tactile gloves, together with features from a frozen 3D geometry teacher, supervise the visual tokens; these objectives are removed at inference. In parallel, a tactile pathway encodes regional force histories and 3D taxel states to condition the action expert. A single checkpoint therefore supports both vision-only and tactile-conditioned deployment. To scale this supervision, we build HumanTouch, a 1,000-hour dataset of full-hand tactile human manipulation, and pretrain Spark-0 on it together with egocentric video, robot data, and simulation. We also release SparkArena, which pairs vision-only simulated tasks with tactile-conditioned real-robot tasks on one dexterous embodiment. Spark-0 achieves the highest mean success rate on both SparkArena tracks and ranks first on all eight aggregate metrics of the Ego Humanoid Manipulation Benchmark. Compared with vision-only pretraining on the same data and compute with touch discarded, retaining the touch of 1,000 hours of HumanTouch raises vision-only success on Ego Humanoid from 52.5% to 71.7%, and success on SparkArena-Real, where touch is also used at deployment, from 44.0% to 52.0%, indicating that touch serves not only as a policy input but also as scalable supervision for dexterous visuomotor pretraining. The Website is available at: https://xsparkai.com/Spark-0.

0.20

GPT-6-Astra Understands Touch and Outperform Vision--Tactile--Language--Action Models

cs.RO cs.CL ·2026-10-20 ·Ziyong Wang, Yupei Lin, Runxuan Huang, Liang Lin, Dongyu Zhang +1 more
similarity 0.77
Abstract · https://gpt-as-tactile-policy.github.io/

General-purpose multimodal models have shown promise as direct robot action policies, yet whether they grasp the physics underlying real-world interactions and can apply that understanding to guide action remains underexplored. We investigate this question using contact-rich manipulation as a representative testbed, examining tactile understanding as a concrete instance of this broader capability. Contact-rich manipulation requires interpreting tactile feedback and adjusting actions after obstruction. Existing learned tactile policies acquire these capabilities through specialized pretraining and per-task optimization, with substantial data and training costs. We present GPT-as-Tactile-Policy, which summarizes expert demonstrations into task guidance and tactile references for contact assessment and corrective action. GPT-6-Astra combines this context with multimodal observations and interaction history to generate control commands and adjust actions through contact feedback. Without additional robotics-specific pretraining or per-task policy fine-tuning, our method achieves 93.8\% mean success across five UniVTAC tasks. Overall performance is comparable to state-of-the-art policies, with higher success on selected tasks. On Insert Hole, tactile feedback improves success from 31\% to 99\%. Execution analysis further demonstrates contact-guided probing and correction, supporting manipulation progress through explicit expert experience and online feedback.

0.40

Embodied Task Agents Can Perform Fine Manipulation through Tactile In-Context Learning

cs.RO ·2026-10-20 ·Yubang Wang, Zezheng Huai, Yifei Zhang, Jinhao Wu, Yitong Chen +6 more
code/data similarity 0.77
Abstract · 24 pages. Project page: https://no-518.github.io/tactile-eta/

Can embodied task agents use tactile experience to perform fine manipulation without task-specific model training? We investigate this capability through Tactile-ETA, a system that incorporates tactile experience into an embodied task agent through in-context learning. Successful expert demonstrations show how contact changes during manipulation. We pair each recorded robot movement with its camera views and bilateral tactile observations. We keep tactile observations at the start and end of each movement and add two neighboring time points when the tactile images change markedly in between. The agent combines these demonstrations with current vision, tactile observations, and proprioception to select actions through general-purpose robot tools, without updating model parameters. Across four simulated manipulation tasks, adding tactile observations to the same two expert demonstrations increases average success from 15.75% to 24.00%, with current sensing and execution interfaces held fixed. Further experiments show that performance depends on the sensory content and representation of demonstrations, while comparing agent models on Lift Bottle reveals substantial differences under the same system configuration. On the real-robot tasks, demonstrations with aligned visual and tactile observations increase the task success rate from 0% to 60%. These findings demonstrate the feasibility of using tactile experience in context for fine manipulation and suggest a path toward extending embodied task agents to additional sensory inputs.

0.46

Bench2Dex: Benchmarking Visuo-Tactile Bimanual Dexterous Manipulation Across Dexterous Hands

cs.RO cs.AIcs.CV ·2026-09-14 ·Zhenjie Yang, Yideng Zhang, Dongjie Zhang, Chenyu Jiang, Xianshuai Liu +19 more
benchmarkcode/datahighly cited similarity 0.77
Abstract · Technical Report. Project Page: https://bench2dex.github.io/

Tactile sensing provides contact information that can be difficult to infer from vision alone, but tactile hardware for dexterous hands has not converged to a common design. Dexterous hands differ in finger structure, contact surfaces, and sensor layouts, while simulated tactile signals still differ from measurements produced by physical sensors. These factors make it difficult to study visuo-tactile manipulation across diverse dexterous hands within a consistent experimental setting. We present Bench2Dex, a simulation benchmark for visuo-tactile bimanual manipulation across 12 dexterous hands. We adapt existing robot models with a shared simulated tactile interface that converts local contact geometry into image-like tactile observations. The interface provides a consistent observation format across different hand morphologies without attempting to reproduce the output of a specific physical tactile sensor. Bench2Dex includes 26 bimanual manipulation tasks that involve tool use, articulated-object interaction, and multi-stage manipulation, together with about 1.3K human-teleoperated demonstrations. The benchmark provides synchronized visual, tactile, proprioceptive, action, and object-state observations, together with executable task metrics. For robustness, we group seven perturbation types into invariance axis, where the correct action does not change, and equivariance axis, where the correct action changes together with the perturbation. We evaluate ACT, Diffusion Policy, pi0.5, and GR00T N1.5 on Bench2Dex and report their performance and failure modes. Bench2Dex is meant as a platform for studying visuo-tactile learning across dexterous hands. It does not assume that simulated tactile observations can replace real tactile sensing; it offers a shared setting for algorithm development while tactile hardware and simulation models are still evolving.

0.55