CS Paper Radar

What Survives on Real Drawings: Active Sampling, Connectome Wiring, and Matched Baselines in Architectural Document Vision

Dmitry Kuklev

cs.CV ·submitted 2026-09-21 13:30 UTC · v2

Abstract

A connectome-constrained model of the fly visual system, optimized for motion and then frozen, can be driven over architectural drawings by prescribed motion and used as a texture representation. We compare it with information-matched baselines that see the same 721 photoreceptor samples. On clean synthetic data the frozen model transfers but loses to task training: 0.857 area-weighted accuracy in one-shot hatch matching versus 0.959 for a 5,888-parameter CNN, and 0.619 IoU in wall segmentation versus 0.905 for a matched network. Under scan noise and thickened strokes, the trained networks lose up to 0.188 accuracy while the frozen pipeline loses 0.030. On fourteen production sheets, opened once, a 1,876-parameter fly model reaches 0.505 average precision versus 0.415 for a network two hundred times larger. A preregistered held-out split confirms the clean-data ordering: 0.835 for the circuit, 0.894 for receptors only, and 0.971-0.980 for trained CNNs. Rewiring the connectome while preserving degrees or type pairs and transmitter signs costs 0.271-0.356 accuracy across three seeds, so the exact wiring is load-bearing. Yet the intact circuit does not beat its moving retina, and T4/T5 silencing leaves both tasks intact. Longer observations reverse the circuit-receptor ordering once the stimulus spans a period, but not through T4/T5. Thus active sampling and exact structure matter, while clean-data practical performance remains dominated by task-trained networks and the useful transfer margin is largely retinal.

Comment
11 pages, 8 figures, 6 tables. Major revision with a preregistered held-out evaluation, matched graph nulls, temporal sampling controls, real-drawing evaluation, and an ancillary animation

Closest papers

Nearest neighbours by meaning across the whole index.

From the Drosophila Visual Connectome to General-Purpose Computer Vision

cs.CV cs.NEq-bio.NC ·2026-10-06 ·Zongyu Li, Akito Yamauchi, Huaizhi Liu, Vishwanatha Rao, Jia Guo +2 more
benchmarkhot direction similarity 0.69
Abstract · 27 pages, 17 figures, 7 tables

Biological connectomes encode structured solutions to visual computation that may provide reusable inductive biases for artificial vision. We develop ConnectomeX around FlyVision, a trainable architecture that preserves parallel ON/OFF processing, recurrent computation and population-level graph interaction while scaling model capacity across tasks. FlyVision reached 99.34% accuracy on MNIST with 80,608 parameters and 78.03% on CIFAR-10 with 81,408 parameters. On ImageNet-1K, FlyVision Base and Large reached 60.79% and 66.25% top-1 accuracy with 1.8 and 3.7 million parameters, while a Large local-k7 model with a learned low-frequency branch reached 66.53%, compared with 69.25% for ResNet18 with 11.7 million parameters. On a 22-class skin-disease benchmark, FlyVision Large achieved 63.78% accuracy and 95.28% macro-AUROC with 2.99 million parameters. In four-class chest radiography, ImageNet-pretrained FlyVision Base and Large reached 92.60% and 92.76% accuracy with 1.33 and 2.97 million parameters, compared with 91.56% for ImageNet-pretrained ResNet18 with 11.18 million. BrainAGE extends FlyVision to volumetric T1-weighted MRI by applying a shared ImageNet-pretrained FlyVision Large encoder to 24 sagittal, coronal and axial slices per scan and combining slice-level age estimates by confidence-modulated Gaussian voting. On 433 held-out scans, three-axis fusion achieved a mean absolute error of 5.98 years and R^2 = 0.868. Across the 224x224 classification tasks, the best FlyVision configuration remained within three percentage points of ResNet18 on ImageNet-1K and skin-disease classification and exceeded it on chest radiography with substantially fewer parameters. These results show that a conserved connectome-informed computation can scale from compact recognition to large-scale natural and biomedical vision.

0.33

Measuring Robustness and Efficiency in a Connectome-Constrained Fly Visual System Model: Linking an Adversarial and a Perceptual Illusion

cs.CV q-bio.NC ·2026-11-10 ·Alexandre Garcia-Duran, Alejandro Rodriguez-Garcia, Manuel Molano-Mazón, Alexandre Hyafil, Srikanth Ramaswamy +1 more
top venue similarity 0.65
Abstract · 39 pages, 24 figures, 2 tables, Accepted at 40th Conference on Neural Information Processing Systems (NeurIPS 2026)

Biological visual systems compute reliably under tight metabolic and wiring constraints, whereas artificial vision systems consume far more energy and can be sensitive to adversarial perturbations. Whether networks with brain-like wiring are more robust at lower computational cost is unclear. We address this by benchmarking a task-optimized, continuous-time recurrent neural network of the fly visual system constrained by its synaptic connectome (FlyNet) against artificial neural networks. We compare it against CNNs, RAFT, and continuous-time recurrent neural networks without detailed connectome constraints (sCTRNN, CTRNN) on a collision-detection task within a differentiable 3D rendering pipeline. FlyNet is adversarially vulnerable but, relative to its compute, more robust to common video corruptions than RAFT, while using up to five orders of magnitude fewer FLOPs. The CTRNNs remain more robust than FlyNet across almost all tested perturbations, suggesting that connectome constraints benefit efficiency, through their low edge count, over robustness. Recurrence improves robustness to white-box attacks in RAFT and temporal context improves robustness to common corruptions. FlyNet's position and velocity representations degrade under adversarial textures but recover under counterfactual textures that restore correct classification while staying equally far from training, ruling out unfamiliar textures as the cause of failure. The reverse-phi illusion similarly disrupts these representations and inverts the same low-level motion statistic as the adversarial textures. Optimizing this input statistic alone, without access to the network, suffices to induce classification failure, attributing both perturbations to the same circuit vulnerability. Connectome-constrained models can thus surface adversarial failure mechanisms as testable hypotheses about biological perceptual vulnerabilities.

0.31

Blueprint2CAD: Benchmarking Foundation Models on Engineering Drawing-to-CAD Render Correspondence

cs.CV ·2026-11-02 ·Alexander Valverde, Danny Xie-Li, Zhichao Wang, Marcos V. Conde
publishedbenchmark similarity 0.64
Abstract · Accepted at WACV 2027 (LVR)

Engineering drawings specify mechanical parts through orthographic projections. Recognizing which part a drawing depicts underlies part search, design reuse, and digitization, yet no public benchmark measures whether vision models can do it. We introduce Blueprint2CAD, a benchmark for drawing-to-render correspondence: given an orthographic line drawing and a shaded render, usually from another viewpoint, decide whether they show the same part. Its data layer, BlueCAD-30K, applies an open drafting pipeline to 29,925 Zero-to-CAD models, adding view-aligned renders, clean and dimensioned drawings from six viewpoints, and surface-type metadata. Frozen encoders retrieve the matching part from a 10,000-model gallery with up to 65% Recall@1 when viewpoints are known but 43% when they are not, and the four encoders we test lie within six points of each other: viewpoint, not backbone, is the bottleneck. Six zero-shot vision-language models reach only 0.52-0.67 verification accuracy, with model-specific Yes/No biases that chain-of-thought shifts but does not remove; a quick LoRA fine-tuning on in-domain pairs improves verification accuracy by a few points but sharpens these biases and leaves the viewpoint failure intact.

0.26

ProgressNet: Sketching and Prompting with a Frozen Text-to-Image Model

cs.CV ·2026-10-02 ·Arkaprabha Basu, Chaitat Utintu, Yi-Zhe Song
hot direction similarity 0.61
Abstract

Humans draw progressively: a few strokes, a look at the result, a stroke erased, a prompt revised. Image generators do not work this way. They typically take a finished sketch and produce the image in a single pass, so every edit starts the picture again, and the models that do keep state across turns are driven by text, cannot take a stroke, and are too slow to draw with. We present ProgressNet, a training-free framework that lets a frozen text-to-image model follow a drawing session as it unfolds: strokes are added and erased, the prompt is revised, and the image keeps up at about a second per turn. It needs no new parameters because the frozen model already has what a progressive generator needs, a pathway through which the previous turn can be remembered, layers that can carry appearance forward without freezing structure, and an internal signal of how far to trust an unfinished sketch; three inference-time mechanisms (Previous-Concept Memory, Layer-Selective K/V Injection and Banded Adaptive Control) use each in turn. As a sketch fills in, every existing method degrades, the FID of the FLUX+ControlNet baseline doubling between 10% and 100% completion on FS-COCO, while ProgressNet's barely moves; it maintains strong fidelity and progressive coherence across three sketch domains and is preferred by users over five competitors, most widely on erasure.

0.36

ReAL: Accelerating Flow Matching through Segment Advancement with Shared Lookahead

cs.CV ·2026-09-27 ·Xuanhua Yin, Chuanzhi Xu, Haoxian Zhou, Shunqi Mao, Weidong Cai
similarity 0.60
Abstract · 32 pages, 15 figures, 18 tables

Flow-matching models generate high-quality images and videos, but repeated neural network evaluations make sampling expensive. Skipping evaluations reduces this cost by extending an available velocity estimate over a longer span. However, local velocity agreement alone does not determine a suitable span, and checking each candidate endpoint adds costly model calls. We introduce ReAL, a training-free sampler that selects how far to advance using one shared lookahead. Our key insight is that the discrepancy between uncorrected and lookahead-corrected endpoint proposals can be computed directly from the observed velocity mismatch and the candidate span beyond the lookahead. This relation provides a span-dependent selection criterion without additional endpoint evaluations. The same lookahead selects the longest passing candidate span, corrects the accepted update, and supplies its velocity as the next starting estimate. After initialization, each regular iteration requires only one fresh evaluation. ReAL uses the pretrained velocity output and original noise schedule, with no additional training or access to internal features. Experiments cover four image-generation backbones, video generation, and image editing. ReAL achieves 4.91x measured speedup on FLUX.1-dev while retaining 97.0% of dense mean ImageReward. On HunyuanVideo, it achieves a 5.49x speedup while maintaining a VBench score close to that of dense sampling.

0.34

Iris-Z: Scaling One Generative Model Past Specialist Geometry Models

cs.CV cs.AI ·2026-11-11 ·Alejandro Cañada, Chema Garabito
code/data similarity 0.60
Abstract · 14 pages, 9 figures, 6 tables. Code and models: https://github.com/speridlabs/iris-z-sdk

Language moved from many task-specific models to one unified model: a single generative model with a single generative training task that handles all of them within the same backbone, and keeps improving with data, parameters and compute. We believe the bitter lesson applies just as much to computer vision, 3D and spatial understanding, in the end to visual intelligence: the effort should go into general architectures that solve all these tasks in a unified way, and into scaling them, rather than into task-specific designs. We test this on monocular geometry, a task that has belonged to specialised architectures for years. Iris-Z is a general image generator that produces appearance and geometry together. A single backbone denoises, reasons about and understands the image and its depth at the same time, and one set of weights generates images with their depth, estimates depth from photographs and paints images onto a given depth. At enough scale it surpasses state-of-the-art specialists on established depth benchmarks while keeping the generative abilities of the backbone it started from without specialized layers. We release two models for the community.

0.45

Rethinking Data Efficiency in Industrial Dense Prediction: Pretraining Coherence, Not Inductive Bias, Determines ViTs Low-Data Advantage

cs.CV ·2026-08-11 ·Haoran Sui, Yaoyuan Jia
similarity 0.59
Abstract · 14 pages, 10 figures, 17 tables. This paper targets industrial defect detection via vision transformer and CNN alignment grafting

Vision Transformers (ViTs) are widely believed to require more labeled data than CNNs for industrial dense prediction. Through controlled experiments on four industrial datasets, we show that the data-efficiency gap stems from pretraining incoherence, which refers to the statistical mismatch between ImageNet-pretrained ViT backbones and COCO-pretrained CNN necks, rather than from inherent self-attention deficits. We characterize the cross-architecture feature gap and propose a lightweight AlignBlock family for pyramid-level feature recalibration. Our core finding empirically identifies a data-efficiency frontier: for domain-proximal scenes with >= 200 samples, Swin-Graft surpasses YOLOv11x (terminal 703-shot: 0.973 vs 0.956 mAP@50); for domain-distant scenes, CNNs retain advantage (hook 141-shot: 0.900 vs 0.600 mAP@50). Grafted neck weights yield up to 2.5x the mAP of a randomly initialized neck.

0.10

FlyVQA: Seeing Video Frame Interpolation Quality through Fly Eyes

cs.CV ·2026-11-18 ·Baoliang Chen, Lingyu Zhu, Zhiwei Zhong, Shiqi Wang
similarity 0.58
Abstract

The ultimate ambition of visual quality assessment is to reproduce the neural computations of human vision and thereby achieve full alignment with human perception. However, the immense complexity of human visual circuitry makes this goal difficult to realize. Recently released fly visual connectomes provide a tractable biological starting point. Despite differences between fly and human vision, the fly's well-characterized motion pathways motivate us to investigate their potential for assessing the perceptual impact of temporal distortions. In this paper, we use a shared, frozen fly visual circuit to perform full-reference quality assessment of frame-interpolated videos, whose artifacts can disrupt temporal consistency. Specifically, compound-eye sampling maps reference and distorted sequences into the circuit, while a connectome-aware readout quantifies discrepancies in cell-type-specific activity and excitatory--inhibitory synaptic dynamics. Reference-guided temporal pooling and a lightweight regression head integrate these differences into a quality score. Experiments across multiple interpolation methods demonstrate better agreement with human ratings than CNN, RNN, and Transformer baselines with comparable parameters, supporting a biologically grounded approach to perceptual quality modeling.

0.20