CS Paper Radar

When is a closed-form RGB->S/P ratio adequate? A hyperspectral characterization on natural scenes for mesopic display

Naoyuki Uchida

eess.IV cs.CVcs.GR ·submitted 2026-09-21 16:10 UTC · v1
unusual

Abstract

Mesopic and low-light display transforms require, as their driving signal, a per-pixel scotopic-to-photopic luminance ratio (S/P); the exact spectral S/P is unavailable for ordinary RGB content, so a low-cost closed form that estimates S/P from a linear-RGB triplet is used in its place. Such closed forms exist but have been characterized only on narrowband / LED sources, i.e. spectrally sparse spectra, where a relative error of ~41% has been reported for a three-channel projection. Display content, however, is natural and broadband. We ask whether the same closed form is adequate there, using per-pixel spectral S/P from hyperspectral imagery as ground truth. On a daylight radiance time-series, a six-scalar closed form (three photopic and three scotopic channel weights) reproduces spectral S/P with a median error of ~0.07 that is time-invariant once the RGB input is chromatically adapted to D65; evaluated in un-adapted sRGB the error instead carries a color-temperature tilt across illuminants (~0.19), so adaptation is the enabling step for this use case. The result generalizes to an independent fifty-scene set (pooled median 0.024; 45/50 scenes within a pre-registered 0.10 band), with the few exceedances concentrated in saturated, spectrally-peaky surfaces that approach the narrowband regime (floral close-ups in this set). The scotopic weight vector is shown to be primary-model dependent, but the value used here is corroborated by a primary-free XYZ projection, and the median error stays within the band across all principled coefficient choices. We do not claim observer-validated appearance fidelity or adequacy on narrowband sources; both are out of scope. Both outcomes follow from the same three-channel projection: it is overwhelmed by spectrally sparse inputs and adequate on spectrally smooth ones.

Comment
14 pages, 5 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Beyond CCT: Multi-channel SPD recovery for per-shot camera color correction

cs.CV ·2026-10-29 ·Shuwei Yue, Hongke Wei, Qiao Chen
benchmark similarity 0.62
Abstract

Modern cameras correct color via two or three pre-calibrated 3x3 matrices interpolated by Correlated Color Temperature (CCT). This collapses the illuminant SPD to a scalar. LEDs, fluorescents, and mixed sources sit off the Planckian locus, and metameric illuminants with the same chromaticity demand different optimal CCMs that a CCT pipeline cannot distinguish. We recover the illuminant SPD instead using non-negative least squares against a basis dictionary, conditioned on the camera white point and a multi-channel ambient-light sensor (ALS). A closed-form 3x3 CCM is then fit per shot. On a synthetic benchmark of 300 illuminants and 3,100 reflectances, mean angular error drops from 1.89 to 1.20 degrees, with a 1.7x tail reduction on the LED-like off-Planckian group (n=45) where metameric ambiguity is tangible. The gain holds under realistic ALS imperfections and observation noise, and the same off-Planckian advantage carries over to 1,684 real measured SPDs.

0.25

Spectral World Renderer: Unified 3D Hyperspectral Unmixing

cs.CV cs.GR ·2026-10-14 ·Chia-Ming Lee, Yu-Jou Hsiao, Ming-Ching Chang, Xin Li, Yu-Lun Liu +1 more
code/data similarity 0.59
Abstract · Project page: https://ming053l.github.io/Spectral-World-Renderer/ Code: https://github.com/ming053l/Spectral-World-Renderer Dataset: https:/…

Cameras and the foundation models built on them recognize what a 3D scene contains, but not what it is made of: surfaces of the same colour can be different materials. Hyperspectral unmixing explains each spectrum as a mixture of material signatures, yet in 3D it is applied to rendered images after the views are composited, or tied to slow implicit fields, and no multi-view data with known composition exist to check the result. We present the Spectral World Renderer (SWR), which unifies world generation and unmixing. A coding agent builds executable 3D worlds that are rendered with measured spectra, so every hyperspectral image comes with exact labels and sub-pixel proportions; the resulting SWR-Bench provides eight indoor and outdoor worlds in which decompositions can be verified. SWR then unmixes inside rendering: each Gaussian of a compact 3D representation is decoded into material abundances before compositing, so one render yields spectra and material maps, and any surface can be queried by material name, a clicked pixel or a reference spectrum. Without material labels, SWR identifies materials best in all eight worlds, has the best mean PSNR on real captures, trains 3.7-12.9x faster than unmixing baselines, renders 34.9 labelled views/s and separates same-coloured materials.

0.31

Registration-Free Hyperspectral Reconstruction from RGB via a Permutation-Invariant Gram-Matrix Principle

cs.CV ·2026-08-15 ·Jiangsan Zhao, Masayuki Hirafuji, Seishi Ninomiya, Jakob Geipel, Wei Guo
similarity 0.54
Abstract · 11 pages, 10 figures, 8 tables. This work has been submitted to the IEEE for possible publication

Reconstructing a spatially and spectrally high-resolution hyperspectral image (HR-HSI) from a low-resolution HSI (LR-HSI) and a high-resolution RGB image (HR-RGB) usually assumes precise registration and a known camera response function (CRF). Both assumptions are difficult to satisfy with different sensors. We remove both through a permutation-invariant supervision principle: the Gram matrix of an unmixed abundance map depends on shared material composition but not on pixel ordering. Matching abundance Gram matrices therefore allows RGB-to-HSI mapping to be learned without spatial correspondence and without a predefined CRF. Under a full random permutation of HR-RGB pixels, a state-of-the-art fusion method collapses, whereas our reconstruction is unchanged after inverse reindexing for evaluation. Building on this principle, a residual spectral super-resolution function maps HR-RGB directly to HR-HSI without registration, known CRF, or paired supervision. Across indoor, natural-scene, and remote-sensing benchmarks, the method achieves accuracy comparable to approaches that require these assumptions while remaining robust when they are violated. Loss ablations further show that reconstruction accuracy is largely insensitive to the specific discrepancy used to match the Gram matrices, indicating that performance arises primarily from the permutation-invariant principle rather than loss tuning.

0.12

SpecUltra: A Unified Foundation Model for Heterogeneous Spectral Images

cs.CV ·2026-11-01 ·Weili Kong, Baisen Liu, Xiaojun Bi, Jiaming Pei
similarity 0.53
Abstract

Spectral imagery, including hyperspectral image (HSI) and multispectral image (MSI), exhibits substantial heterogeneity in band numbers, wavelengths, spectral resolutions, hindering unified modeling and cross-sensor transfer. From the perspective of imaging physics, these heterogeneous observations can be regarded as discrete measurements of an underlying continuous spectrum acquired through different sampling processes. Motivated by this perspective, we propose SpecUltra, a unified foundation model for heterogeneous spectral images. Specifically, SpecUltra employs 3D convolutional tokenization and wavelength-aware 3D RoPE to encode relative wavelength and spatial relationships, enabling fine-grained spatial-spectral modeling within a shared coordinate system. We further construct MultiHyper-200K, a large-scale multi-sensor HSI dataset, and pretrain SpecUltra using auxiliary-token-assisted mask image modeling (MIM), where a level token indicates the radiometric product type and register tokens absorb sensor- and acquisition-dependent variations. To bridge the spectral-granularity gap between HSI and MSI, we introduce Spectral Kernel Transformation (SKT), which transfers pretrained knowledge in parameter space by constructing MSI embedding kernels from fine-grained HSI-pretrained kernel slices. This design preserves pretrained spectral priors while maintaining compatibility with the pretrained backbone. Experiments on HSI and MSI classification and segmentation benchmarks demonstrate state-of-the-art or competitive performance across disparate sensors and downstream tasks.

0.24

Lightweight Interpretable RGB-Guided Hyperspectral Super-Resolution under Real Cross-resolution Misalignment

eess.IV cs.CV ·2026-09-01 ·Mohamad Jouni, Aurélien Godet, Mauro Dalla Mura
benchmark similarity 0.53
Abstract

Compact snapshot hyperspectral cameras provide rich instantaneous spectral measurements for ground-level machine vision, but at lower spatial resolution than standard RGB cameras. RGB-guided hyperspectral super-resolution (HSR) addresses this limitation by transferring spatial detail from a high-resolution RGB guide to a low-resolution hyperspectral image (HSI). These dual-camera systems are typically in a horizontal rig geometry, requiring cross-camera image alignment due to different fields of view. However, residual misregistration can inject spurious high-frequency details. Existing learned unaligned-fusion methods are usually trained for a fixed spectral support and spatial scale factors and can be computationally demanding, limiting their flexibility across sensors. We propose a lightweight and interpretable RGB-guided HSR framework combining cross-modal flow alignment with model-based Gram-Schmidt orthogonalization fusion. The method first warps the RGB guide onto the HSI grid, then estimates an energy-based confidence weight map by measuring local alignment reliability. This map is then used both in a weighted least-squares spectral regression and in a gated fusion between the super-resolved estimate and an HSI-preserving estimate. Unlike existing learned methods, the proposed framework has a low computational footprint and supports VIS-NIR spectral supports and scale factors without retraining. Experiments on the Real benchmark show that the proposed method improves reconstruction accuracy over learned fusion baselines while remaining substantially faster. On a 34-frame sequence acquired with our real RGB-HSI dual-camera setup, a reduced-resolution quantitative evaluation validates the method under genuine cross-sensor radiometric, noise, and geometric differences, while native-resolution qualitative results demonstrate deployment on the full 51-band VIS-NIR acquisition.

0.30

Interpretable Landsat-to-Hyperspectral Dual Super-Resolution Without Large Matrix Inversion

eess.IV eess.SP ·2026-08-24 ·Chia-Hsiang Lin, Jian-Kai Huang, Si-Sheng Young, Wei-Cheng Zheng
publishedcode/data similarity 0.53
Abstract · 17 pages; accepted for publication in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing (JSTARS). Source code…

Direct acquisition of global hyperspectral images (HSIs) is infeasible given contemporary hardware facilities and limited resources, while global hyperspectral monitoring is critical for remote sensing applications. A more economical approach is to interpretably convert global Landsat-8/9 multispectral images into NASA's AVIRIS-level HSIs. This conversion involves both spatial super-resolution (SpaSR, 30-m to 15-m) and the highly ill-posed spectral super-resolution (SpeSR, 7-band to 172-band), collectively referred to as dual super-resolution (DualSR), whose duality between SpaSR and SpeSR has recently been established. Existing SpeSR methods, mostly designed to reconstruct CAVE-level HSIs with only 31 visible bands, are not applicable to the AVIRIS-level task involving 172 visible, near-infrared, and shortwave-infrared bands. This motivates us to customize an interpretable alternating direction method of multipliers network (ADMM-Net) using the Woodbury W-Lemma and a spectral continuity prior. Unlike conventional generative SpaSR, we employ a panchromatic sharpening strategy to recover physically grounded spatial details. However, this strategy induces very large matrix inversions (LMIs), with dimensionality proportional to the number of pixels, even after applying the W-Lemma. We resolve this issue by designing an LMI-free proximal gradient descent network (PGD-Net). Consequently, the proposed PGD-ADMM interpretable network (PAINT) achieves substantial improvements in both computational complexity and reconstruction performance. Beyond state-of-the-art reconstruction performance, PAINT improves Landsat classification from 78.98% accuracy and 76.06% kappa to 92.16% accuracy and 90.98% kappa.

0.72

Cross-Spectral Dense Correspondence for Multimodal Spectral Medical Imaging

cs.CV cs.AI ·2026-08-28 ·Eric L. Wisotzky, Jost Triller, Simon W. Härtl, Oliver T. Bruns, Peter Eisert +1 more
publishedbenchmark similarity 0.53
Abstract · Accepted at 2nd Data Curation & Augmentation in Medical Imaging Workshop at ECCV 2026

Precise dense correspondence is a fundamental prerequisite for multimodal spectral imaging systems that fuse disparate wavelength ranges for subsequent analysis in medical and scientific imaging. Corresponding image points are often observed with non-overlapping spectral sensitivities, leading to wavelength-dependent contrast changes, intensity inversions, and appearance shifts for which dense ground truth is difficult to obtain and conventional RGB-based training data provides only limited supervision. We address this data gap by introducing a sensor-agnostic cross-spectral modulation protocol on established correspondence benchmarks with intensity input projection, and by proposing a synthetic cross-spectral correspondence benchmark simulating physically plausible radiometric differences. Evaluation on several modern dense correspondence backbones trained with our unified cross-spectral protocol showed substantial improvements under severe spectral mismatch while maintaining performance on standard RGB benchmarks. Ablation experiments show that view-dependent channel selection and nonlinear radiometric transformations provide complementary robustness, indicating that the primary limitation of existing models is not their structural matching capacity but the mismatch between training distribution and spectral characteristics of the target image pair. Qualitative evaluations on heterogeneous medical spectral acquisition systems demonstrate the practical relevance of the proposed training data augmentation protocol as an enabler for spatially coherent spectral fusion in HSI workflows.

0.34

HyperSAM: A Promptable Foundation Model for Hyperspectral Remote Sensing

cs.CV ·2026-09-29 ·Li Pang, Xinqiao Wu, Jing Yao, Pedram Ghamisi, Jun Zhou +3 more
published similarity 0.52
Abstract · Accepted by IEEE Geoscience and Remote Sensing Magazine (GRSM)

Hyperspectral remote sensing provides dense spectral measurements that are indispensable for material-level Earth observation, yet the construction of a general-purpose hyperspectral foundation model remains difficult. Two bottlenecks are especially limiting. First, large hyperspectral corpora rarely provide high spatial resolution together with reliable dense annotations. Second, many hyperspectral models are still trained almost from scratch, so the geometric and interactive priors learned by modern vision foundation models are not fully reused. To alleviate these issues, we \highlight{present} \textbf{HyperSAM}, a promptable hyperspectral foundation model that couples a data-centric hyperspectral synthesis pipeline with a spectral adaptation architecture based on Segment Anything Model 3 (SAM3). On the data side, HyperSAM synthesizes full-spectrum hyperspectral cubes from high-resolution SpaceNet multispectral imagery through a physics-informed abundance-transfer generator, while SAM3-derived pseudo-masks provide object-centric supervision. On the model side, the latest implementation uses a frozen SAM3 RGB image branch, a trainable hyperspectral side encoder initialized from the RGB vision transformer (ViT), ControlNet-style zero-initialized feature injection, and a lightweight mixture-of-experts mask refiner. To enhance training robustness against noisy pseudo-labels, Cross-modal Sample Selection (CromSS)-style confidence selection is incorporated for noisy-label weighting. Extensive experiments show that HyperSAM obtains strong generalization on diverse hyperspectral tasks (e.g., classification, anomaly detection, change detection, target detection, and airborne oil-spill mapping) and that high-quality synthetic hyperspectral data can be more effective than simply scaling noisy hyperspectral supervision.

0.22