CS Paper Radar

Acoustic Ellipses: Bio-Inspired Omnidirectional Echolocation in Cooperative Multi-Agent Systems using Frequency Sweeps

Petras Swissler, Lindsay Burke, Julia Hyland Bruno

cs.RO ·submitted 2026-09-17 21:36 UTC · v1
published

Abstract

Inspired by the flight and song of birds, we propose an approach that enables cooperating agents to effectively identify obstacles in their environment by having a stationary source agent emit a frequency-modulated chirp while one or more listener agents observe the direct and reflected signals while in motion. We present a novel mapping approach that exploits the ``frequency gap'' between direct and reflected chirp signals to define candidate reflection ellipses, which are then fed into a 2D accumulation filter to identify locations with the highest density of potential reflections. We demonstrate this work first with simulation results derived from an efficient, bespoke audio simulator, examining the effect of obstacle count, sampling rate, and path curvature on the ability to accurately identify environmental obstacles for a one-listener scenario. We then examine different cooperative motion strategies for two-listener configurations. Finally, we validate the real-world viability of this approach through field experiments in an outdoor park setting to demonstrate the ability to identify frequency gaps using off-the-shelf hardware. Our results provide a foundation for a low-cost approach to environmental mapping in swarm robotic systems.

Comment
8 pages. Accepted to IROS 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Embodied AI for Radio Mapping: From Solo to Swarm

eess.SP ·2026-10-31 ·Shangjie Zhuang, Wenlihan Lu, Zhentian Zhang, Ziwei Huang, Zaichen Zhang +2 more
similarity 0.56
Abstract

Radio maps provide spatial knowledge of wireless environments to assess coverage, manage spectrum use, and support connectivity-aware mobility. Recent advances in embodied intelligence (EI) offer a promising approach to radio map reconstruction by enabling agents to perceive the environment and autonomously adjust their survey paths toward safe, reachable locations. However, a single agent remains constrained by limited endurance and onboard computing capacity, limiting measurement collection and reconstruction performance. Swarm cooperation can support more efficient radio mapping over larger areas by sharing observations and coordinating members' sampling. This article first explores the capabilities and applications of cooperative embodied agents. A cooperative radio map reconstruction framework is then presented, together with its key enabling techniques. Case study results illustrate how scene perception supports access to informative sampling locations and how air--ground cooperation improves reconstruction through complementary measurements and mobile support. The article concludes with open challenges and future research directions for reliable and efficient embodied cooperative radio mapping in complex environments.

0.30

BatSLAM 2.0: Sequence-Verified Sonar Place Recognition in a Robust Pose Graph

cs.RO cs.AIcs.LGeess.SY ·2026-09-30 ·Jan Steckel
similarity 0.54
Abstract

Echolocating bats can navigate dark and cluttered spaces using echolocation. Over a decade ago, BatSLAM showed that a robot with a biomimetic binaural sonar can build a topological map of the environment, by recognizing places from the received acoustic signals. Sonar place recognition, however, is ambiguous by nature: corridors produce nearly identical echo trains, and wrong loop closure can collapse the topological map. In this paper, we introduce BatSLAM 2.0, a novel sonar-only SLAM system built from three elements: an updated acoustic front-end, a sequence verifier that tracks and verifies loop closure candidates and a pose graph implemented on a high performance factor graph framework. The system was thoroughly evaluated both in simulated as well as real world recordings. In both cases, the BatSLAM2.0 algorithm shows the capability of robust topological map creation, countering map collapse, and robust scaling of map size.

0.48

On Distributed Sensing and Adversarial Localization of Narrowband Acoustic Sources for Offshore Data Center Monitoring

cs.RO ·2026-10-25 ·Adnan Abdullah, David Blow, Harsha Gundala Sureshbabu, Dongyoon Joung, Sara Rampazzi +1 more
similarity 0.53
Abstract · Technical report, 19 pages, 11 figures

This report investigates an acoustic surveillance framework for localizing and tracking narrowband adversarial acoustic sources that threaten offshore data centers. Unlike conventional sound source localization (SSL) methods that rely on broadband signals and compact receiver arrays, the considered scenario involves narrowband emissions and sparse sensors. In such scenarios, the observed time-difference-of-arrival (TDOA) measurements are aliased and produce an ambiguous solution space, rendering conventional localization methods ineffective. To address this challenge, we integrate a mobile receiver that temporarily forms anchor pairs with selected fixed receivers, constraining the feasible solution space. The proposed two-stage pipeline first estimates the initial source position using anchor constraints, then initializes a particle filter that jointly tracks source position and velocity using one live anchor measurement and quality-adaptive fixed-pair measurements. We evaluate the proposed method through Monte Carlo acoustic simulations, ROS-Gazebo robotic demonstrations, and open-water field experiments. Our framework achieves a localization success rate of 91% in simulation, while 9 of 10 field trials show tracking error below 2m under receiver-position uncertainty and noisy sensing conditions. These findings demonstrate the feasibility of passive acoustic surveillance for protecting large-scale infrastructure against acoustic threats.

0.27

RTISSLAM: In-air Imaging Sonar SLAM using a Robust Pose Graph and Occupancy Grid Mapping

cs.RO ·2026-10-13 ·Jan Steckel
similarity 0.53
Abstract

Sonar was one of the first sensors with which mobile robots built maps, and in-air sonar keeps working where cameras and lidar fail, in darkness, smoke, dust and next to glass. Classical sonar SLAM, however, relied on geometric features or occupancy grids built from sparse range readings, and both struggle with the specular reflections that dominate indoor sonar. In this letter, we introduce RTISSLAM, a novel sonar-only SLAM system for an embedded 3D imaging sonar, which combines the robust pose graph of BatSLAM 2.0 as back-end with an occupancy grid as map. Energyscapes from delay-multiply-and-sum beamforming with a range-wise CFAR serve as place descriptors for sequence-verified loop closures, acoustic odometry calibrates the wheel odometry online, recognized revisits are registered metrically, and the grid is stored per keyframe and anchored to the pose-graph nodes, so that it follows every loop closure. In simulated worlds with specular walls, RTISSLAM reduces the trajectory error of the wheel odometry from \SI{8.2}{\meter} to \SI{0.31}{\meter} in an office, while lidar-style grid SLAM on the same sonar data fails.

0.29

TACET: Context-Appropriate Acoustic-Social Navigation for Quadrupeds

cs.RO ·2026-10-02 ·Sungsan Park, Young-Sik Shin, Sanghyun Kim
code/data similarity 0.51
Abstract · 8 pages

Quadruped robots entering hospitals, care homes, and quiet offices must be context-appropriate not only in where they move but in how loudly they move: a legged robot's locomotion noise, dominated by foot-ground impacts, is itself a social variable. Prior social navigation respects human space but treats the robot as acoustically uniform, while quiet-locomotion methods reduce noise to an operator-specified, context-blind level. We present TACET, a context-appropriate acoustic-social navigation method that infers social context from the robot's egocentric view and decides both where it walks and how loudly, coupling a slow fine-tuned vision-language reasoner to a fast reactive controller through a single compact behavior token, <gait, speed, social_cost>. The same token conditions both a social costmap (where to go) and a quiet locomotion policy (how loudly to move), while a structured out-of-view memory keeps recently seen people in the reasoner's context after they leave the camera view. On a real quadruped, context-conditioned locomotion lowers locomotion noise by up to 9.3 dBA at matched speed, and across our scenarios the full method keeps personal-space compliance at 100% with low acoustic intrusion (<=2.9 dBA), jointly improving spatial and acoustic performance in the evaluated scenarios. The project page is available at https://rcilab.khu.ac.kr/tacet/.

0.33

RTISSLAM-3D: Full 6-DoF SLAM With an In-Air 3D Imaging Sonar

cs.RO ·2026-10-15 ·Jan Steckel, Vincent Katter, Wouter Jansen
similarity 0.51
Abstract

Echolocating bats navigate dense forests using sonar alone, and in-air 3D imaging sonars now capture the entire frontal hemisphere with every pulse. Sonar SLAM, however, has so far been planar: current systems estimate a 2D trajectory and discard the elevation information in the sonar images, an assumption that does not hold on rough and sloped terrain such as a forest floor. In this paper, we introduce RTISSLAM-3D, a novel 6-DoF SLAM system for a wheeled robot that carries an in-air 3D imaging sonar, an IMU and wheel encoders. A CFAR detector on the sphere reduces every sonar image to a sparse set of 3D detections, which we use for a 3D acoustic odometry that models the shape of the sonar beam, for place recognition with polar submap descriptors, and for the verification of loop closures by 3D registration, all combined in a 6-DoF pose graph with attitude factors. We evaluated RTISSLAM-3D on a 545m drive through a forest, with a 3D lidar SLAM as reference. The loop closures reduced the horizontal error of the acoustic odometry from 1.74m to 0.28m, with a height error of 0.12m, and 94.6% of the resulting 3D sonar map lies within 0.3 m of the lidar map.

0.16

EcoBoat: Design and Experimental Validation of an Autonomous Body-Board Boat For Cleaning Water Bodies

cs.RO ·2026-09-13 ·M. Aman Ansari, Saifullah Khan, Rahul Kulkarni, PB Sujit
similarity 0.51
Abstract

Cleaning water bodies such as swimming pools and lakes typically demands significant manual effort or reliance on costly, sensor-intensive robotic systems. This paper presents EcoBoat, a low-cost autonomous surface vehicle built on a modified hull, designed to collect floating debris in both indoor and outdoor water bodies. For indoor environments, EcoBoat uses ultrasonic sensors to detect boundaries and obstacles, combining random-walk motion with boundary-following behavior. For outdoor environments, it relies on GPS-based geofencing paired with a random-walk strategy for area coverage. A key design feature is a Tesla-valve-inspired collection basket that allows debris intake during forward motion while preventing its escape during turning or braking. Field experiments in pools and lakes validated the design through iterative refinement, demonstrating that a minimalist sensing and computation approach can achieve effective, versatile debris collection across diverse water bodies.

0.24

Benchmarking Interaction-Oriented Aerial Mobility across Heterogeneous Environments

cs.RO ·2026-10-13 ·Zhibo Duan, Hanlin Kong, Tianran Ma, Yuze Wu, Yuxuan Xu +6 more
benchmark similarity 0.51
Abstract

Aerial mobile manipulation requires unmanned aerial vehicles (UAVs) to traverse heterogeneous environments such as indoor and outdoor domains, and connect navigation with subsequent physical interaction within the same trajectories. Existing aerial benchmarks are typically confined to single-environment settings, limiting evaluation of agents across continuous environmental transitions. When interaction is evaluated, agents are often initialized near the target, leaving the transition from navigation to interaction largely unassessed. This work introduces CrossFly, a benchmark for long-horizon interaction-oriented aerial mobility across heterogeneous environments. CrossFly contains 15K trajectories across more than 20 reconstructed scenes under a unified simulation and evaluation framework, covering Indoor, Outdoor, and Indoor$\leftrightarrow$Outdoor trajectories. It further introduces Interaction Readiness Rate (IRR) to assess whether terminal navigation states provide suitable conditions for downstream interaction without assuming a specific manipulation policy. Experiments with five representative aerial vision-language-action (VLA) agents and the proposed CrossFly-Agent show that Indoor$\leftrightarrow$Outdoor settings are more challenging than single-environment settings, with the highest success rate reaching 9.7% on unseen scenes. A downstream manipulation case study further validates the relevance of interaction-oriented arrival to subsequent physical interaction. We hope CrossFly helps advance aerial embodied intelligence toward unified mobility and physical interaction in heterogeneous environments.

0.26