CS Paper Radar

Vision Foundation Models with Synthetic-Only Training for Monocular Spacecraft Pose Estimation

John Church, Vazghen Nikolian

cs.CV cs.RO ·submitted 2026-09-22 15:13 UTC · v1
published

Abstract

We present an improvement on previous spacecraft pose estimation architectures that results in the lowest published mean rotation errors we know of on the SPEED+ lightbox and sunlamp test sets for a known, non-cooperative spacecraft. By using a previously established heatmap-based pose estimation architecture and adapting a large self-supervised ViT foundation model (DINOv3) in place of the smaller convolutional and ViT encoders of previous work, we show that pose estimation accuracy improves from 300M to 840M parameters with no saturation yet observed. We also evaluate our 840M model on a Jetson Orin NX 16GB, measuring single-pass network inference at 133.8 ms per crop with a board draw of 32.0 W. These measurements demonstrate embedded inference feasibility on a processor family with orbital flight heritage. Our resulting model outperforms previous models across lightbox and sunlamp domains while training only on synthetic data. Our best model, using DINOv3 840M adapted with LoRA as the encoder (rank 64, three-seed ensemble with four-rotation test-time augmentation), results in $1.56^\circ$ mean rotation error on sunlamp and $1.17^\circ$ on lightbox, compared to the previous best mean rotation errors we know of on these test sets, $2.66^\circ$ and $1.75^\circ$ by EagerNet.

Comment
6 pages, 3 figures, 4 tables. A shorter version was accepted to the IROS 2026 Space Robotics Workshop (non-archival)

Closest papers

Nearest neighbours by meaning across the whole index.

Unreasonable Confidence from Simulator Misspecification: Directional Robustness on the SPEED+ Sim-to-Real Benchmark

cs.CV cs.AIcs.LG ·2026-11-15 ·Nikolay Dolgov
publishedbenchmarkcode/data similarity 0.68
Abstract · 22 pages, 5 figures, 20 tables. Extended version of a paper at the Sim2Science workshop, NeurIPS 2026. Code, per-image predictions and pre-r…

Vision-based navigation systems for orbit must be trained almost entirely on synthetic imagery, because real labelled images of a given spacecraft in flight rarely exist. Benchmarks like SPEED+ are built for that situation: the training set comes from a simulator, and the test sets are real images of a satellite mockup under two kinds of lighting. That simulator approximates how light reflects off mylar and aluminium, and like every scientific simulator it is misspecified. Its error is radiometric, since it misses the specular highlights, hard shadows and sensor saturation common in real images. We probe the resulting synthetic-to-real gap, the central risk for such systems, with a deliberately simple monocular pose estimator. In a 2x2 study of backbone adaptation and photometric augmentation, trained on synthetic images and tested on both real hardware-in-the-loop domains, we find three things. (1) The model does not know it is failing: regions conformally calibrated to 90% on synthetic data cover only 9-15% of rotation errors on sunlamp and 21-38% on lightbox, so a wrong pose carries the confidence of a correct one. (2) Transfer is asymmetric: scaling data and features improved synthetic rotation error from 1.65 to 1.03 rad but moved the harshly lit sunlamp domain by only 0.05 rad, under twice its seed s.d., whereas adapting the backbone's last stage carried 63-83% of its extra synthetic gain to both real domains. (3) Once the backbone adapts, augmentation helps only in the direction it models: our photometric stack improved the diffusely lit lightbox domain from 1.17 to 0.99 rad on every seed but moved sunlamp no more than seed-to-seed variation, while with the backbone frozen it helped sunlamp more. Every post-review experiment was pre-registered, and the code, per-image predictions and pre-registration record are at https://github.com/lokindoo/spacecraft-pose-estimation.

0.46

LightSEAD: Lightweight SE(3)-Aware Keypoint Detector through Selective Knowledge Distillation

cs.CV cs.RO ·2026-11-18 ·Mayowa Adebambo, Alexander D. Rast, Andrew Bradley
similarity 0.66
Abstract

The pursuit of improved performance in deep learning has often been accompanied by increasing architectural complexity and computational demands. We explore an alternative direction: achieving more with less through structured supervision. We introduce LightSEAD, a lightweight SE(3)-aware keypoint detector initialised with calibrated Harris pseudo-labels and enriched through viewpoint-aware and appearance-aware supervision and selective knowledge distillation. LightSEAD comprises only six convolutional layers and 84,289 learnable parameters, achieving competitive repeatability across HPatches, KITTI 06 and 4Seasons while demonstrating its downstream applicability to relative pose estimation on MegaDepth-1500. Further optimised for mixed-precision inference, LightSEAD Coarse achieves approximately 909 FPS on an NVIDIA RTX 4090 and 139 FPS on a Jetson Orin Nano Super.

0.25

Planning-Aligned Pretraining of BEV Representations with Sparse Action-Conditioned Targets for End-to-End Autonomous Driving

cs.CV cs.AI ·2026-09-19 ·Jaeha Song, Soonmin Hwang
code/datahot direction similarity 0.65
Abstract

End-to-end driving requires planning-relevant bird's-eye-view (BEV) representations, but existing pretraining approaches often rely on task annotations or dense scene reconstruction. We introduce PAVER, Planning-Aligned BEV Encoder Pretraining. From a single LiDAR sweep, PAVER constructs sparse risk and unknown targets describing occupied and unobserved evidence along rule-based ego motions. A 10K-parameter head predicts these targets from masked BEV features conditioned on the action state, directing supervision toward geometric constraints on candidate motions. Pretraining requires no driving-task annotations or dense reconstruction. Only the BEV encoder is transferred, preserving the downstream architecture and camera-only inference. On nuScenes, PAVER reduces VAD-Tiny's average collision rate from 0.51% to 0.19%, while improving planning L2, motion prediction, detection, and mapping. The selected VAD-Tiny and VAD-Base schedules use about 36% less estimated total training time than scratch training, including pretraining. On Bench2Drive Town05 Long, PAVER improves UniAD-Tiny's closed-loop Driving Score from 48.45 to 58.79. The project page is available at https://archiiive99.github.io/PAVER.

0.33

Direct Regression and Geometric Recovery for Event-based Spacecraft Pose Estimation

cs.CV ·2026-11-06 ·Pruthvi Nandan Janga, Kashyap Hegde Kota, Bharatesh Chakravarthi
similarity 0.65
Abstract

Event cameras offer high temporal resolution and dynamic range for uncooperative spacecraft pose estimation, but models trained on synthetic event streams must generalize to the noise, background activity, and contrast variation of physical sensors. We present a comparative systems study of two independently developed approaches to synthetic-to-real, event-based 6-DoF spacecraft pose estimation. The first is a modular pipeline that combines learned keypoint detection and unlabeled target-domain adaptation with geometry-based pose recovery and temporal smoothing. The second directly regresses translation and rotation from global and cropped event representations using an apparent-scale cue, physics-motivated synthetic corruptions, and feature-consistency regularization. We evaluate both systems under the same SPARK 2026 hidden-test protocol on the real-event split of SPADES, with predictions for all test frames. The results reveal a component-wise reversal concealed by the aggregate challenge score: direct regression reduces orientation error by 22.7% (1.1767 to 0.9101 rad) and obtains a 13.4% lower composite score, whereas the modular pipeline reduces relative translation error by 78.7% (0.1335 to 0.0285). Archived configurations and a qualitative failure case identify plausible explanations for these complementary error profiles, without isolating their causes. These findings motivate a testable hybrid design that combines direct orientation estimation with geometry-constrained translation recovery.

0.17

Frame-Consistent Feed-Forward 3D Gaussian Splatting from Sparse Unposed Images

cs.CV ·2026-10-16 ·Viruthshaan Vinasirajan, Ranga Rodrigo
similarity 0.64
Abstract

Feed-forward Gaussian models have made novel view synthesis almost instantaneous. Feed-forward methods predict Gaussians directly, either in two stages or in a single merged pass. Using two separately trained models is attractive because each can specialize in its own objective: one for accurate pose estimation and the other for high-quality reconstruction, rather than forcing a single jointly trained network to compromise between the two. A natural instantiation pairs a frozen pose estimator, VGGT, with a frozen reconstruction backbone, TokenGS. Prior work, such as VGGT-X and 3R-GS, also adopts a two-stage design, but attributes the resulting quality degradation to noisy pose estimates and introduces learned refinement. We show that this is not the primary source of the problem. Through per-camera analysis across 107 scenes from two datasets, DL3DV and MipNeRF360, using COLMAP poses as the reference, we find that the rotation error after alignment is small (median 1.6 degrees), whereas the translation scale is offset by a large, dataset-consistent factor. Controlled ablations over 140 DL3DV scenes show that the primary obstacles are two integration failures rather than pose error: a coordinate-frame inconsistency and a translation-scale mismatch, both of which can be corrected deterministically. With these fixes, a frozen VGGT driving a frozen TokenGS achieves 22.47 PSNR, within 0.51 dB of the COLMAP reference, with no additional training, when poses are estimated from all scene views. In the sparse setting, where reconstruction uses only four context images under the standard pose-free protocol, the same pipeline matches this all-view quality, yielding a fully COLMAP-free pipeline without any refinement step.

0.11

Frozen in a Frame: The Velocity Blind Spot in JEPA World Models

cs.CV ·2026-10-03 ·Tinghe Zhang, Chunyu Liu, Yu Leon Liu, Zerui Zhao, Jiaheng Chen +4 more
code/data similarity 0.63
Abstract · 32 pages, 17 figures, 12 tables. Code, model checkpoints, and project page are available via links in the paper

Joint-embedding predictive architectures (JEPAs) for world modeling train an encoder so a predictor maps a current embedding and action to the next frame's embedding, always from a single rendered frame. This has a structural blind spot: a renderer without motion blur draws a scene from configuration alone, so a single-frame embedding carries no velocity information, for any encoder, including the official released LeWM weights. We confirm this on official checkpoints across four real benchmarks (PushT, Reacher, Cube, TwoRoom): every linear velocity probe sits at or below chance while position probes reach R^2 about 0.95. We introduce RateIdent, a three-stage diagnostic protocol, and TI-JEPA, a lightweight fix splitting the latent into a pose code and an explicit finite-difference motion code, predicted jointly. Across three physically grounded environments, TI-JEPA gives a significant, seed-robust gain on a stop-at-goal planning task over a matched-memory baseline, e.g. 55% lower final distance on Pendulum (p=3.2x10^-10) and 64% on CartPole (p=5.1x10^-15). We reproduce this at official ViT-Tiny plus AdaLN-transformer scale, then push the same recipe onto real dm_control Reacher photographs trained from scratch, where TI-JEPA's branch separation exceeds the memory-having baseline's by roughly 38x, the paper's largest margin. Against a same-footprint recurrent RSSM-style predictor, TI-JEPA matches or beats its rollout accuracy on two of three environments, stays separately probeable for pose and motion, and wins outright on the most coupled one. A checkable formal argument and six evaluated environments show single-frame targets are the wrong object to predict when velocity matters, and a small, interpretable structural change fixes it with no privileged supervision. Code, checkpoints, and the project page are linked below the title.

0.40

LVSPM: Long Sequence View Synthesis and Pose Estimation Model

cs.CV ·2026-10-07 ·Xi Chen, Yachi Zhang, Linghao Chen, Minghua Liu, Hao Su +2 more
top venuecode/data similarity 0.63
Abstract · ECCV 2026. Project Page: https://burningdust21.github.io/Projects/LVSPM/

We present LVSPM, a generalizable model that jointly estimates camera poses and synthesizes novel views from uncalibrated image collections. Trained with only RGB images and pose supervision, LVSPM avoids dense 3D ground truth and employs test-time training (TTT) layers to scale seamlessly to hundreds of input views. On RealEstate10k, Co3Dv2, and DL3DV, LVSPM surpasses VGGT in pose estimation across 16-256 views, with especially large margins at strict thresholds. For novel view synthesis under a practical protocol where more views cover larger scenes, LVSPM achieves state-of-the-art pose-free quality---surpassing even pose-dependent models in PSNR---and still maintains high quality as scene scale grows, while baselines collapse. The code is available at https://burningdust21.github.io/Projects/LVSPM .

0.43

HAT: Hypothesis-Anchored Tracking for Video Monocular Spacecraft Pose Estimation

cs.CV ·2026-09-18 ·André Lopo, Atabak Dehban, Rodrigo Ventura
similarity 0.63
Abstract · 8 pages, 3 figures, 4 tables

Monocular 6-DoF pose estimation of non-cooperative targets is important for on-orbit servicing and debris removal. A single-image estimator can confuse near-symmetric spacecraft orientations, and tracking can preserve an incorrect pose. We present Hypothesis-Anchored Tracking (HAT), a causal framework that uses inter-frame motion to select among competing CAD-based pose hypotheses before alignment and fusion. Rather than independently choosing the highest-scoring hypothesis in each image, HAT retains competing orientation histories and selects a pose to anchor the relative trajectory estimated by monocular SLAM. Sparse anchors and pose fusion provide per-frame estimates after initialization without revising past outputs. The method requires only a calibrated RGB sequence, a metric CAD model, and target image regions, which can be supplied by detection or segmentation. The pretrained pose and SLAM networks require no target-specific training or fine-tuning. We evaluate two versions, Mega-HAT and Pico-HAT, using MegaPose and PicoPose, on SPARK-2024, SwissCube and SHIRT, with YCB-Video assessing performance outside the space domain. Using one temporal configuration per method, the arithmetic means of the four dataset-wise comparisons show 9.4% lower mean pose error and 3.76 times the sustained input FPS for Mega-HAT relative to independent MegaPose, and 23.9% lower mean pose error and 2.42 times the FPS for Pico-HAT relative to independent PicoPose. Mega-HAT ablations on SPARK and an offline reference examine component contributions and the effect of revising past estimates.

0.51