CS Paper Radar

φ-RIE: From Photorealistic Reconstruction to Interactive Environments

Runyi Yang, Deheng Zhang, Xiaoye Wang, Kanzhi Wu, Lei Sun, Ajad Chhatkuli, Kunyu Peng, Luc Van Gool, Danda Pani Paudel

cs.RO cs.CVcs.GR ·submitted 2026-09-22 17:59 UTC · v1

Abstract

3D Gaussian Splatting (3DGS) can reconstruct a captured scene photorealistically, but the resulting representation does not by itself support physical interaction. Robot simulation instead requires object-level change, \textit{i.e.}, objects must move independently, make contact, and reveal previously occluded surroundings. This gap arises because object appearance may remain entangled with the background, while hidden object geometry and occluded background content may be unobserved. To address this challenge, we present φ-RIE, a Gaussian-native pipeline that converts selected objects into movable simulator assets while preserving the remaining reconstruction. Our key observation is that asset construction and source removal should be coupled, \textit{i.e.}, one object identity should define the movable asset and the scene content to remove and complete. Accordingly, Scene Observation supplies shared evidence to Coupled Scene Construction, which creates registered assets and completed background Gaussians for simulator-driven rendering in an Interactive Environment. This coupling preserves unedited Gaussians while aligning visual and physical state. On 50 ScanNet++ scenes, evidence-based selection and registration retry increase matched F1 at 20\,mm from 0.336 to 0.383 at fixed retention. Further tests demonstrate asset executability, manipulation gains over a single-generator baseline, and the visual cost of conversion. Together, these results demonstrate that \name\ enables interactive scene conversion.

Comment
8 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Measuring Asset and Scene Reconstruction Effects in Real-to-Sim Robot Evaluation

cs.RO ·2026-09-30 ·Sanya Verma, Luca Cilio, Velissarios Christodoulou, Tyler Fermelis, Qi Ting Ng +2 more
code/data similarity 0.74
Abstract · v2: added link to the code and data repository. Code: https://github.com/Kaedim/yam-sim-harness-oss

Simulated evaluation is increasingly used alongside real-world evaluation of robot policies because it is cheaper and easier to repeat; however, its value depends on how closely its outcomes track the real robot's. We test whether our reconstruction pipeline, combining metrically scaled object geometry, authored physical parameters and scene reconstruction, reduces disagreement between simulated and real robot scores relative to a default open-source recipe. We constructed two simulated versions of one bimanual robot cell: an authored reconstruction, using object geometry at estimated metric scale, projected textures, authored physics and our own scene splat; and a baseline, referred to as the default reconstruction, using the open-source recipe of a generative single-image mesh, engine-default physics and a Gaussian-splat scene. Both reconstructions use the same object photographs and scene video. Two policies ran five tasks each, giving ten task-policy pairs, which we call cells; each cell was run twenty times in each reconstruction with all other settings held fixed. Both reconstructions were scored against the same real trials, graded by a third-party evaluator. Pearson correlation between the ten simulated and real cell means is r = 0.90 for the authored reconstruction and 0.51 for the default. Mean score error is 6.97 percentage points for the authored reconstruction and 17.54 for the default, a reduction of 10.56 percentage points. These results show that improving the quality of the environment reconstruction through higher visual fidelity, authored physics and metric scale makes the simulation more faithful to the real world and narrows the sim-to-real gap. We release the harness, the per-trial scores, every reported run's configuration, and the assets and scenes of both reconstructions.

0.61

Lucida: Parse, Generate, and Place for Composable Real-to-Sim Scene Modeling

cs.CV cs.AI ·2026-08-31 ·Minghan Qin, Yuang Wang, Xiuyu Yang, Yushi Long, Yujian Zhang +4 more
code/datahighly cited similarity 0.73
Abstract · Project Page: https://lucida-r2s.github.io/

Composable scene modeling aims to recover a real indoor scene as complete, editable object assets arranged as observed, giving robot simulation and embodied AI a simulation-ready replica of the real environment whose objects can be manipulated individually. Existing pipelines decompose the task into three steps---parse the observations into instances, generate an asset for each, and place each asset back---but every step presumes an input that a cluttered capture rarely provides: accurate instance geometry, unoccluded views, and assets that accurately match the observations. We propose Lucida, which keeps this order but redistributes the requirements, so each step consumes only what a real capture reliably provides and precision is reached at the end of the pipeline rather than demanded at its start. Lucida parses the video into a scene graph whose nodes carry per-instance multi-view evidence, generates a complete asset for each instance from its evidence, and places assets with GizmoAct, a VLM policy that casts placement as multi-turn GUI interaction, manipulating the object's gizmo in a closed loop and deciding itself when alignment is reached. Across scene-level 3D object detection, object pose estimation, and scene reconstruction, Lucida improves mAP over Boxer by 69% on R2S-Scene, raises ADD-SB@0.05 from 57.8% to 83.4% on CA-1M, and increases scene F-Score from 0.794 for SAM3D to 0.924.

0.58

Demonstration Synthesis from a Single Scan via Gaussian Splatting for Visuomotor Policy Learning

cs.RO ·2026-09-17 ·Beichen Wang, Yuen-Hei Yeung, V. R. Sridhar Devarakonda, Xuesu Xiao
similarity 0.72
Abstract

Training a visuomotor policy calls for abundant demonstrations that closely match the target environment, yet collecting them anew remains expensive. Existing demonstration synthesis methods reduce this cost but remain constrained by high manual effort, limited visual fidelity, or heavy reliance on physics simulators. This paper introduces GaussianFactory, a high-fidelity data engine that mass-produces demonstrations with a single video scan as its only human input and no physics engine in the generation loop. Specifically, GaussianFactory reconstructs the scene as an editable 3D Gaussian Splatting (3DGS) replica and samples from the object-combination tasks the scene affords. For each task, it plans grasps and trajectories purely kinematically on the geometric reconstruction, rendering photorealistic demonstrations that visually match the target environment. Physical dynamics enter the pipeline only where contact force interactions dictate the outcome---during grasp formation, via a learned contact model pretrained once on an interaction dataset. To evaluate the downstream utility of the synthesized demonstrations, we implement an end-to-end scan-to-deployment workflow in two setups: a simulated scene that stands in for the real world to enable reproducibility, and a real-world workspace with a physical UR10e robot. In each setup, a standard diffusion policy trained solely on the synthesized demonstrations achieves 95.1% and 84.2% success rates, respectively.

0.40

YUBI-Real2Sim: 3DGS Scene Verification for Reliable Policy Evaluation

cs.RO cs.AI ·2026-10-13 ·Hiroki Nishizawa, Takehiko Ohkawa, Nicola Scianca, Tatsuya Matsushima, Shigeo Morishima +1 more
benchmarkcode/data similarity 0.72
Abstract · Under submission

Evaluating VLA policies on real robots is costly, time-consuming, and difficult to reproduce, making real-to-sim simulation essential for scalable evaluation. While 3D Gaussian Splatting (3DGS) enables rapid real-to-sim scene generation, the reconstruction quality required for reliable policy evaluation remains unquantified. In particular, policies relying on wrist-mounted fisheye cameras (e.g., YUBI handheld gripper data) are heavily exposed to visual artifacts (holes, floaters) in wide-angle views, directly degrading task performance. To address this, we present YUBI-Real2Sim, a unified framework for 3DGS-based scene reconstruction and real-to-sim policy evaluation under dual fisheye wrist views. We develop an integrated pipeline combining 200-degree fisheye camera capture, 3DGS training, 3D foundation models for object modeling, and MuJoCo-based physical simulation, reproducing the observed real-world policy ordering in eight of nine scene-task comparisons. Using this framework, we construct a benchmark across two bimanual robot platforms, three scenes, three tasks, and dual pi0.5-based policies. This systematically measures real-to-sim rank agreement and evaluates policy sensitivity against counterfactual 3DGS artifacts (ceiling holes, floaters, warping) and capture disturbances. We further analyze whether novel-view quality scores can indicate policy-ranking reliability under a scene-held-out evaluation protocol. The results show task-dependent performance and limitations of quality-based reliability prediction, highlighting the need to assess reconstruction quality when using Real2Sim for policy evaluation. These results do not yet establish a generally reliable scene-acceptance rule. Project Page: https://yubi-real2sim.airoa.io.

0.28

DensiTok: Making Feed-Forward 3D Gaussian Splatting See More Views Than It Is Given

cs.CV ·2026-10-06 ·Minhyeok Lee, Jungho Lee, Minseok Kang, Heeseung Choi, Ig-Jae Kim +1 more
similarity 0.71
Abstract

Feed-forward 3D Gaussian Splatting (3DGS) reconstructs a scene in a single forward pass, replacing per-scene optimization with a network trained across many scenes. Its quality, however, degrades sharply as the number of input images drops. The bottleneck is upstream of the reconstruction heads: from a few unposed views, the internal representation they read carries no evidence for unobserved regions, leaving holes, floaters, and blur. The common remedy supplies that evidence as pixels, synthesizing extra views with an image or video generator and re-encoding them, which is costly and not 3D-consistent by construction. We instead densify the evidence itself. We present DensiTok, a plug-in module for pretrained feed-forward 3DGS models that densifies their internal geometry tokens directly, making a frozen backbone behave as though it had observed many more views than it was given. DensiTok compresses those tokens into a compact latent space, completes the latents of the unobserved viewpoints in a single flow-matching step conditioned on camera geometry, and decodes them back into tokens that the original reconstruction heads. The same module design can be integrated into different pretrained predictors while keeping each backbone and its reconstruction heads frozen. Completion in a low-dimensional latent space requires no image synthesis or additional encoder passes. Across three pretrained backbones and two benchmarks, DensiTok consistently improves sparse-view reconstruction and recovers much of the gap to dense-view reconstruction.

0.17

SceneAgent: An Agentic Pipeline from 3D and 4D Captures to Simulation Environments

cs.RO cs.AIcs.CV ·2026-10-26 ·Luke Hollis, Tianxing Fan, Heng Yang
similarity 0.70
Abstract

Visual captures provide detailed scene appearance, but converting them into interactive simulation environments requires object reconstruction, physical modeling, and correction of intermediate errors. We present SceneAgent, an agentic pipeline that coordinates these steps through simulator-based visual inspection and repair. The pipeline processes 3D Gaussian Splatting (3DGS), photogrammetry, LiDAR captures, AI-generated 3DGS scenes, and 4D videos of dynamic scenes, and combines object segmentation, physical parameter estimation, part decomposition, articulation, and deformable simulation. To support policy learning, SceneAgent generates diverse object variants ("digital sisters") and scripted demonstrations. On a cluttered bin scene from GraspClutter6D, SceneAgent raises F1 at 1 cm for every coding agent with scorable outputs both with and without its skills, and its reconstructions are better than SimFoundry: all agent configurations exceed SimFoundry's F1 score, with a best of 60.75% versus 6.9%. On three dynamic scenes from 4DCodeBench, SceneAgent raises the mean dynamic IoU of Gemini 4 Argon from 0.86% to 99.09%. We further demonstrate diverse simulated interactions and preliminary policy transfer to a real robot.

0.44

CODA: Depth-Aligned Scene Completion and Object Decomposition from a Single RGB-D Image

cs.RO cs.CVcs.LG ·2026-09-22 ·Dongwon Son, Junhyek Han, Yoontae Cho, Minseok Lee, Hong-seok Choi +3 more
code/data similarity 0.70
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://dongwon-son.github.io/coda-project-page/

Robots operating safely in cluttered everyday environments often need to infer scene geometry from partial observations. Methods that detect objects in 2D and reconstruct them independently struggle in such scenes: a missed object is never reconstructed, a merged detection can fuse two objects, and separately reconstructed meshes may overlap or fail to touch their supporting surfaces. We introduce CODA (Complete Once, Decompose Afterward), a generative model that instead reconstructs the complete scene geometry from a single unsegmented RGB-D image, then separates the surface into the surrounding environment and movable objects. Still, generated scene geometry can drift from the observed partial point cloud. To reduce this drift, CODA uses two explicit 3D grounding mechanisms to keep reconstructed geometry consistent with observed surfaces while completing unseen regions. Experiments on HomebrewedDB and our custom cluttered-scene dataset show more accurate reconstructions and a higher fraction of objects remaining in place under simulated gravity than both object-first and scene-first baselines.

0.27

GATOR: Generative and Agentic 3D Object Reconstruction From Casual Images

cs.CV cs.RO ·2026-10-08 ·Qirui Wu, Stan Birchfield, Hesam Rabeti, Angel X. Chang, Bowen Wen
code/data similarity 0.70
Abstract

Reconstructing complete, scene-aligned 3D objects from casual images requires integrating sparse, uncertain observations and inferring surfaces hidden by occlusions. We present GATOR, a generative and agentic framework that recovers textured object assets and their scene-relative pose from one or more images. Our local modality mixer couples patch-aligned RGB, target-mask, and pointmap features before cross-view reasoning, preserving scene context while distinguishing the target from its surroundings. Text-guided semantic conditioning complements these spatial cues with category names and object captions through stage-specific adapters for structure, geometry, and appearance generation. The generated asset initializes a multimodal agent, providing instance-specific geometry and pose for targeted structural and texture refinement through an observation-guided edit-render-review loop. Across synthetic objects, cluttered tabletops, and indoor scenes, GATOR achieves strong geometric and appearance fidelity while recovering scene-relative pose from sparse observations. Time-budget comparisons and scene-level simulation further demonstrate the reconstruction efficiency and simulation readiness. Project page: https://research.nvidia.com/labs/lpr/gator/

0.28