CS Paper Radar

Learning Dissipative Dynamics with Dissipativity-by-Construction Discrete-Time Neural Networks

Tuan Luong, Hyungpil Moon

cs.RO ·submitted 2026-09-23 00:49 UTC · v1
published

Abstract

Dissipativity is a fundamental system-theoretic property closely related to stability, passivity, and input--output stability, and is particularly important in robotics, where learned dynamics models are often embedded within feedback control loops. However, most existing approaches for learning dissipative dynamics are based on continuous-time formulations, which require ODE solvers during training or inference and can therefore be computationally expensive. Moreover, because practical implementations are inherently discrete-time, direct discretization of a continuous-time passive system does not necessarily preserve passivity, motivating the need for explicit discrete-time guarantees. This study proposes a method for learning incrementally dissipative dynamics from input--output time-series data using a deep multilayer perceptron formulated directly in discrete time. Through a constrained parameterization and a dedicated training procedure, the proposed model guarantees incremental dissipativity by construction rather than through regularization. Lyapunov-based analysis establishes the corresponding dissipativity and stability guarantees, while simulations on robotic dynamical systems demonstrate competitive prediction accuracy, computational efficiency, and consistent preservation of incremental dissipativity compared with baseline methods.

DOI
10.13140/RG.2.2.19947.91682

Closest papers

Nearest neighbours by meaning across the whole index.

Data-driven discrete-time deep recurrent neural network-based modeling for dissipative systems

cs.LG cs.RO ·2026-09-23 ·Tuan Luong, Hyungpil Moon
published similarity 0.76
Abstract

Physical AI has gained increasing attention for its role in developing AI systems that better understand, predict, and control real-world dynamics. Achieving this requires AI models that not only achieve high prediction accuracy but also preserve fundamental physical properties of dynamical systems. In this paper, we propose a deep discrete-time dissipative recurrent neural network (DissipNet) that explicitly enforces dissipativity, a key property related to stability and energy dissipation, through structural weight constraints and a dedicated training algorithm. By construction, the proposed network is capable of learning dissipative dynamics while preserving their inherent stability, which is formally analyzed using Lyapunov theory. In contrast to Physics-Informed Neural Networks (PINNs), which incorporate governing equations into the training loss but do not guarantee preservation of internal analytical properties such as dissipativity or passivity, our approach provides explicit guarantees on stability at the model level. We demonstrate the effectiveness of the proposed method through several modeling applications, and compare its performance with a naive recurrent neural network (RNN) and a PINN-based model.

0.39

Dissipative Lagrangian Neural Networks for the Interpretable Modelling of Passive Mechanical Systems

cs.LG cs.CE ·2026-10-11 ·Rob Seabourne, Alice Cicirello
similarity 0.74
Abstract

In this paper, we propose the Dissipative Lagrangian Neural Network (dLNN), a continuous-time system identification technique that separately learns the conservative and dissipative dynamics of a mechanical system directly from data. A key contribution is a novel parametrisation of dissipative forces that (i) is structurally constrained to be dissipative, enforcing passivity of the learned model, (ii) cannot absorb conservative mechanics, and (iii) retains sufficient expressivity to represent a broad family of state-dependent damping and regularised friction forces. The model is validated on prediction tasks on two real-world mechanical systems: trajectory prediction of a chaotic double pendulum and inverse-dynamics modelling of a six-degree-of-freedom industrial robot. Across these tasks, the dLNN demonstrates improved predictive performance over existing Lagrangian architectures while remaining competitive with a black-box neural model. The imposed physical structure also improves generalisation to unseen states, with the benefits becoming particularly pronounced when training data is limited. Finally, we introduce a symbolic distillation procedure that extracts closed-form expressions from the learned physical components. Applied to the industrial robot, this produces interpretable symbolic models that retain high predictive accuracy while reducing the computational overhead associated with evaluating neural Lagrangian models.

0.08

Deep learning from a control vantage point

eess.SY cs.AIcs.LGmath.OC ·2026-10-09 ·Álvaro Rodríguez Abella, João Pedro Silvestre, Bahman Gharesifard, Paulo Tabuada
publishedsurvey similarity 0.63
Abstract

This article offers an overview of recent developments in deep learning from a control vantage point. It reviews several classes of models including feedforward and residual neural networks, transformers, large-language models, and selective state space models while explaining how control theory plays an important role in understanding their training, properties, or architecture design. The article explains how residual neural networks can be interpreted as the discretization of a continuous-time control system thereby enabling the use of control theoretic techniques for its analysis. To illustrate the power of this bridge between control and deep learning, two technical results are discussed: 1) the ability of a residual neural network to approximate arbitrary continuous functions is a non-standard controllability problem that can be solved using geometric nonlinear control and 2) transformers, the key architectural component of most large language-models, can be seen the discretization of a consensus algorithm and thus large language-models exhibit consensus. Another point of contact between control theory and deep learning is the connection between backpropagation, the algorithm used to train neural networks, and optimal control. The article addresses how the older connection between these problems, established in the 80's using discrete-time models can be reconciled with the more recent approach using continuous-time models. Several open problems and directions for future research are discussed, including selective state-space models, a recent class of models inspired by the models used in control.

0.41

Unrolled gradients in disguise: bridging interpolation-based and Jacobian regularization for stable neural dynamics

cs.LG math.NA ·2026-11-02 ·Maya Janvier, Etienne Meunier
top venue similarity 0.61
Abstract · Accepted at NeurIPS 2026

Hybrid models and neural differential equations (NDEs) are becoming increasingly important for modelling physical systems; however, they often encounter stability and accuracy issues during long-term integration. Training on unrolled trajectories is known to limit these divergences but quickly becomes too computationally expensive due to the need to compute gradients over an iterative process, making this method impractical for large-scale physical systems (e.g. weather and climate forecasting). Two popular paradigms for improving the stability of learned dynamics are to train on interpolated or noisy samples or to regularize the Jacobian of the learned representation. In this work, we demonstrate that these paradigms can be understood under a common lens and that they both correspond to an approximation of the gradients obtained in an unrolled learning strategy. Building on this understanding, we derive a principled and complete approach to regularize training and demonstrate its impact on the stability of learned dynamical systems.

0.39

Adaptive Stability-Constrained Neural Differential Equations for Controlled Dynamical Systems with Unknown Inputs

eess.SY ·2026-08-10 ·Syed Pouladi
similarity 0.60
Abstract

Continuous-time neural models are attractive for identifying nonlinear systems, but a small one-step error can grow rapidly when a learned vector field is rolled out under inputs that differ from those used for training. This paper develops an adaptive stability-constrained neural differential equation (AS-NDE) for systems with measured controls and unmatched, unknown perturbations. The nominal vector field and a state--input-dependent Riemannian metric are learned jointly. Positive definiteness is enforced by construction, while a sampled differential inequality penalizes violations of a prescribed contraction rate. An incremental input-to-state bound is derived: the distance between two trajectories decays exponentially up to gains determined by differences in their controls and disturbances. The statement explicitly accounts for the time derivative of an input-dependent metric, a term that is easily omitted in heuristic stability regularizers. We give a reproducible evaluation protocol for a forced Duffing oscillator and a permanent-magnet synchronous motor (PMSM) model. Because no measured data or executed training runs accompany this draft, all numerical curves and tables are clearly identified as illustrative synthetic placeholders; their PGFPlots coordinates are embedded in the source for direct replacement. The resulting manuscript is intended as a technically consistent starting point, not as evidence of empirical superiority before the prescribed experiments are run.

0.04

Hybrid-time PINNs: Discontinuity-Aware Physics-Informed Neural Networks for Learning Hybrid Dynamical Systems

eess.SY cs.AI ·2026-10-24 ·Shivanshu Tripathi, Maziar Raissi
similarity 0.59
Abstract

Hybrid dynamical systems flow continuously but jump at discrete events. Physics-informed neural networks (PINNs) fit data while enforcing known dynamics, but a single network is smooth in time and cannot model these jumps. We show that the more closely a PINN follows a jump, the larger its physics loss must be. We propose hybrid-time PINNs (HT-PINNs), which assign one network to each flow interval of the hybrid time domain and train the networks jointly with the jump times and the unknown parameters. The number of jumps and the sequence of modes are found by enumeration. HT-PINNs recover the number of jumps and the restitution coefficient of a bouncing ball. In a MuJoCo simulation of robotic disassembly, where a robot pulls a press-fitted pin out of a housing through a spring, HT-PINNs find the number of jumps and the sequence of modes, and estimate the static and kinetic friction coefficients with small errors of 0.1% and 1.7%.

0.22

Learning the Dynamics of Deformable Linear Objects Through Coupled Oscillators for Bimanual Robotic Manipulation

cs.RO ·2026-11-17 ·Iván López-Broceño, Maximilian Stölzle, Daniel Feliu-Talegon, Daniela Rus, Cosimo Della Santina
similarity 0.59
Abstract

Many learning-based approaches for deformable linear objects (DLOs) rely on simplified deformation models that neglect dynamic effects and the mechanical response of the objects, limiting their applicability to lightweight, compliant objects and slow motions. Inspired by recent advances in learning physically structured dynamics with coupled oscillator networks (CONs), we propose $Φ$-CON for learning force-driven DLO dynamics. The model combines a floating-base coupled oscillator network (FBCON), whose latent potential energy depends only on the DLO's shape, with a learned affine diffeomorphism $Φ$ between observed positions along the DLO and latent coordinates. Its shape dynamics are stable by construction, and its Lagrangian structure yields explicit expressions for kinetic and potential energy. We exploit this structure to design a model-based proportional-derivative (PD) controller that compensates for the learned potential forces, thereby establishing closed-loop stability guarantees and ensuring convergence. We evaluate the approach on four simulated DLOs and a real bimanual robot setup. In simulation, $Φ$-CON achieves prediction accuracy comparable to neural ordinary differential equation (NODE) models and Lagrangian neural networks (LNNs), with $97.2\%$ and $90.2\%$ fewer parameters, respectively. Relative to a model-free PD baseline, the proposed controller reduces mean endpoint regulation error by $97.5$-$99.7\%$ in simulation and achieves a mean per-target reduction of $27.9\%$ across both endpoints in real-world experiments, demonstrating the importance of explicitly accounting for the mechanical response of stiff and heavy objects.

0.24

Learning to evolve by matching velocities

cs.LG cs.AImath.NA ·2026-10-30 ·Nicola Farenga, Andrea Manzoni
similarity 0.59
Abstract · 76 pages

Learning the continuous-time evolution of nonlinear dynamical systems relies on trajectory-based objectives, which require simulating the learned dynamics during training and backpropagating through the numerical scheme, at a cost that grows with the rollout horizon. We show that trajectory-based objectives degenerate as the rollout horizon increases, hindering gradient-based optimization, and that the numerical scheme biases the learned dynamics by constraining the spectrum of the learned Jacobian to its absolute stability region. To overcome these limitations, we introduce Velocity Matching (VM), a simulation-free objective that relies on piecewise-linear interpolation and stochastic collocation, and approximates the velocity population risk to second order in the sampling step. We develop a theoretical framework for velocity-based learning, introducing stability estimates that control trajectory errors in terms of velocity errors, which enable us to establish universal and continuous-time approximation results when the learned velocity field is parameterized by deep neural networks. Building on a bias-variance decomposition of the VM objective, we show that its higher-order approximation of the velocity population risk yields a consistent minimizer; that it relates to the residual of an A-stable continuous-stage Runge-Kutta scheme, thus connecting VM to implicit integration without requiring any implicit solve; and that it implicitly matches the action of the learned Jacobian to that of the true one along the observed trajectories, without requiring access to the underlying velocity field or its Jacobian. Numerical experiments on nonlinear ordinary differential equations and semi-discretized time-dependent partial differential equations show that VM improves accuracy over trajectory-based objectives, while avoiding both the cost of simulation and the instabilities of long rollouts.

0.30