CS Paper Radar

LayerCheck: Adaptive Layer-wise Checkpointing for Large Language Model Post-training

Minqiu Sun, Xin Huang, Luanzheng Guo, Nathan R. Tallent, Kento Sato, Dong Dai

cs.DC ·submitted 2026-09-23 00:57 UTC · v1
publishedcode/data

Abstract

With the rising computational and monetary costs of training large language models (LLMs), checkpointing---periodically storing model states for recovery---becomes essential for fault tolerance. Conventional checkpointing entails a severe trade-off between checkpoint frequency (I/O overhead) and computational recovery (recovery time). State-of-the-art approaches mitigate this cost through pipelining checkpoint I/Os, differential checkpointing, or in-memory persistence, yet none leverage the distinct characteristics of LLM training dynamics, where model weight updates are non-uniformly distributed across transformer layers. This observation implies that saving all weights each time might not be efficient. Inspired by this observation, we present LayerCheck, a layer-wise adaptive checkpointing framework that selectively persists layers whose updates exceed a threshold. This design avoids periodic I/O bursts by distributing layer-wise checkpoint writes over time, resulting in smoother and more balanced I/O profiles. Upon recovery, LayerCheck reconstructs a mixed-timestamp composite model state by aggregating the most recently persisted versions of each layer together with their matching optimizer states. Under a bounded per-layer staleness guard, this introduces a controlled perturbation: under standard Adam assumptions it adds a bounded staleness term, and empirically the post-restart loss deviates from the failure-free trajectory by at most 0.54%. Empirical results on multiple open-source LLMs with different datasets further demonstrate that recovered models preserve the original convergence behavior and accuracy while substantially reducing checkpoint overheads. Specifically, LayerCheck achieves up to 22.6x reduction in total checkpoint size and 1.31x reduction in end-to-end training time compared to state-of-the-art systems, significantly lowering the cost of checkpointing.

Comment
Accepted to the 2026 IEEE International Conference on Cluster Computing (CLUSTER 2026). 19 pages, 8 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

ZOCheck: CPU-Shadow Checkpointing for Zeroth-Order LLM Fine-Tuning

cs.DC ·2026-09-23 ·Minqiu Sun, Xin Huang, Luanzheng Guo, Nathan R. Tallent, Kento Sato +1 more
published similarity 0.74
Abstract · Accepted to SC26 (The International Conference for High Performance Computing, Networking, Storage and Analysis), 2026

Zeroth-order (ZO) optimization is an attractive option for memory-efficient LLM fine-tuning, but its fault tolerance remains underexplored. Unlike first-order training, ZO progress can be represented by lightweight seed-and-scalar step logs, yet naive log-only recovery still incurs replay cost that grows with training progress, and shortcut replay does not preserve the executed floating-point trajectory. We present ZOCheck, a fault-tolerant ZO training system that exploits this replayable structure through a CPU shadow process that continuously replays logged updates, materializes consistent recovery images off the GPU critical path, and persists them asynchronously. ZOCheck therefore combines non-blocking checkpointing during training with fast recovery from a near-current state. We also develop a cost model for choosing the snapshot policy under realistic failure rates. Experiments show that ZOCheck reduces checkpoint overhead by up to 219.7x and recovery latency by 1.55x on average compared with asynchronous full-state checkpointing, translating into up to 21.3x lower end-to-end wasted time across the evaluated failure rates, while preserving exact recovery behavior.

0.64

Zero-I/O Fault Recovery for Sharded Deep Learning via Dynamic Framework Dependency Rebinding

cs.DC ·2026-09-16 ·Genlang Chen, Junyi Zhu
similarity 0.74
Abstract · 8 pages, 4 figures, 10 tables

Distributed model training at scale is frequently interrupted by transient network failures, conventionally forcing cluster managers to abort all processes and roll back to the latest checkpoint. While periodic checkpointing provides durability, frequent snapshotting introduces severe storage backpressure: our measurements on a 1.216B-parameter decoder reveal that per-update asynchronous checkpointing incurs up to a +656.7% latency overhead, consumes 32.5 GiB of host memory, and generates 3.39 TB/hour of storage traffic. To eliminate this overhead, we present AccelPact, a parallel runtime enabling zero-I/O in-memory fault recovery for sharded distributed training. When communication fails at a committed optimizer step, device memory remains quiescent and uncorrupted, yet continuation fails because frameworks like PyTorch FSDP cache internal communication handles across module wrappers and parameter hierarchies. AccelPact resolves this dependency invalidation via a non-invasive reference-rebinding mechanism coordinated by an out-of-band Gloo consensus protocol. On 16 NVIDIA RTX 5880 GPUs training full-parameter Mistral-7B, AccelPact eliminates checkpoint replay, yielding a 1.197x whole-run goodput improvement over cold restart and 1.194x over NVRx checkpoint restoration at checkpoint age 5, rising to 1.698x at age 18. Across ten successive fault injections, all 16 ranks maintain bit-identical parameter state with zero numerical drift. Across 4-to-16 GPU cluster topologies, reference rebinding executes in constant time (0.493-0.518 ms). Operating directly on native communicator instances, AccelPact requires zero application-code modifications and avoids compiler graph breaks under torch.compile, providing an efficient foundation for resilient deep learning.

0.27

ReplaySSM: Cache SSM Inputs, Not State

cs.LG cs.AI ·2026-10-09 ·Ze-Wei Liou, Harris Nover, Amey Naik, Andrii Skliar, Igor Shovkun +2 more
code/datahighly cited similarity 0.72
Abstract · 11 pages (35 pages counting references and appendix), 6 figures, 2 tables. Code: https://github.com/Johnny-Liou/ReplaySSM

State-space models (SSMs) maintain a fixed-size recurrent state, but reading and writing it at every decoding step can bottleneck hybrid models. This eager state management causes large state I/O with low arithmetic intensity, leaves speculative decoding no cheap rollback, and feeds state quantization error into subsequent recurrent updates. We introduce ReplaySSM, which unrolls the recurrence to represent the state as a checkpoint and a buffer of recent SSM inputs. This separates output computation from checkpoint updates. By updating the checkpoint periodically, ReplaySSM avoids state writes on most steps and roughly halves the dominant state memory traffic. Keeping recent inputs also makes speculative rollback a buffer-pointer operation and enables output-only verification without materializing intermediate states. The same separation allows a low-precision checkpoint to serve output computation on most steps while a higher-precision checkpoint serves recurrent updates, so rounding error in the low-precision copy never enters later updates. We implement ReplaySSM in vLLM for Mamba-2 and Gated DeltaNet. At serving batch size 256, it accelerates standard decoding by $1.20$--$1.47\times$ over a tuned vLLM baseline across four hybrid models, and delivers about $1.8\times$ the throughput of vLLM's speculative decoding on the two 120B-class models. Separate state precisions also reduce output KL divergence and downstream accuracy losses compared with a shared low-precision checkpoint.

0.57

FailBench: Evaluating Fault Tolerance Across Distributed Training Architectures

cs.DC ·2026-10-06 ·Khaled Aljbab, Amine Barrak
similarity 0.72
Abstract

Distributed deep learning relies on data, pipeline, tensor, and hybrid parallelism, yet fault-tolerance mechanisms are typically evaluated only on the architecture for which they were designed. This leaves practitioners with little guidance when choosing mechanisms across architectures. FailBench provides a unified evaluation harness covering seven distributed training architectures, eight crash-fault-tolerance mechanisms and a no-FT baseline, and single, concurrent, and cascading fail-stop failures. We evaluate 142 (architecture, mechanism, trace) combinations on an 8xV100 cluster, with per-rank checkpoint states ranging from 205 MB to 2.7 GB. Three findings emerge. First, no mechanism is universally best: on A2, disk checkpointing has the lowest steady-state overhead (0.5%), in-memory replication restores fastest (~17 ms), and just-in-time checkpointing avoids periodic steady-state checkpoint cost but incurs ~0.9 s upon failure. When process-group re-formation takes seconds, mechanisms differ more in runtime overhead than restore speed. Second, gossip training increases sample throughput by 17.9% after losing a worker, yet shows no detectable improvement in loss progress over a matched no-fault baseline. Third, mechanism cost depends strongly on architecture: in-memory replication overhead ranges from 3.7% to 176%. We translate these findings into a decision framework for selecting fault-tolerance mechanisms and release FailBench as an open artifact.

0.18

TapeSAC: Automated, Pareto-Optimal Fine-Grained Memory Management for Large Model Training

cs.DC ·2026-11-03 ·Kaihui Ren, Yifan Zhao, Zejian Wang, Yingtong Xiong, Xiaoling Zhou +9 more
similarity 0.70
Abstract

Selective activation checkpointing (SAC) decides which activations to save for the backward pass and which to recompute: each choice is a point in the plane of peak memory and recomputation time, and the goal is that plane's Pareto frontier. Current practice falls short of this goal. Hand-tuned policies fix a single point that does not adapt when the model, batch or kernels change; PyTorch's SAC reruns each block's forward pass in program order, recomputing values the backward pass never reads; and the memory budget of torch.compile treats recomputation as free or forbidden and selects saved tensors by bytes alone, an assumption that fails for the custom kernels that produce many of a large model's activations. We present TapeSAC, which automates SAC in eager PyTorch without editing the model's forward code. TapeSAC records each block's forward pass at the dispatcher and, during backward, replays only the producers of the values autograd consumes, so saving a tensor eliminates every producer needed only for it. A planner selects the saved tensors from measured recomputation costs under a single limit on step-peak memory. On Qwen3.8-27B and Qwen3.6-35B-A3B, replay alone reduces step time by 3.0% and 1.7% versus full checkpointing at no greater memory cost; memory-aware planning raises these gains to 6.3% and 13.9% under a 90%-of-device-memory limit. The evaluated hand-tuned policies fall short of this memory-recomputation frontier and, on Qwen3.6-35B-A3B, run out of memory at larger batches. Over 500 steps on real data, TapeSAC reduces training time by 8-11%; on Qwen3.5-397B, it is 2.7% faster than a model-specific hand-tuned policy while using 14% less memory.

0.12

Checkpoint Reload Explains Most of the Measured State Gap in Two State Discovery Reproductions

cs.LG ·2026-10-26 ·Weijia Han, Lisha Qu
published similarity 0.69
Abstract · Equal contribution, 11 pages, 3 figures, 7 tables. Accepted at the NeurIPS 2026 Workshop on Foundation Models for Temporal Systems (FMTS 202…

Temporal models that maintain per-sequence latent states during training must reconstruct those states when the stored table is unavailable at inference. This creates a basic consistency question: do the reconstructed states agree with those formed during training? We study this question for State Discovery in World Machine, which updates stored states in parallel each epoch but performs inference by sequential rollout from an all-zero start. On Toy1D, we analyze two paired-checkpoint runs whose decoded-state MSE is 27 to 36 percent above the published value. We compare the stored table with rollouts under the best-validation checkpoint reloaded after training and the last-epoch weights that wrote the table. Matching the rollout to the table-writing weights removes 90 to 91 percent of the mean per-dimension Wasserstein-1 distance. Causal distillation and frozen SD updates do not satisfy their pre-specified criteria under either checkpoint. Overall, checkpoint reload accounts for most of the measured gap in these runs.

0.32

Trajectory Soup: Pushing the Compute-Scaling Frontier of LLM Mid-training via Diverse Trajectories

cs.LG cs.AIcs.CL ·2026-09-29 ·Zhehao Huang, Changxin Tian, Qingyuan Yang, Kunlong Chen, Ziqi Liu +3 more
similarity 0.68
Abstract

Mid-training equips pretrained large language models with specialized and reasoning capabilities, but the returns of this stage are bounded since additional serial compute yields little further downstream improvement and can even degrade some capabilities, which places a practical ceiling on how much compute mid-training absorbs. We revisit how this compute should be allocated to a single run or multiple similar optimizations. We find that branches forked from a shared checkpoint under various controlled recipe reaches measurably different regions of parameter space, and establish a form of compatible diversity that extending one run cannot supply. Therefore, we introduce Trajectory Soup, which distributes a mid-training budget over several independent branches, and consolidates strongest checkpoints selected on validation through intra- and inter-trajectory averaging into a single model. A local bias and variance analysis separates the two averaging levels, showing that inter-trajectory averaging removes residual error beyond the reach of averaging within a trajectory, while checkpoint selection carries a bias that bounds how many checkpoints are worth merging. Across model scales, learning-rate schedules, token budgets, and trajectory counts, Trajectory Soup improves aggregate downstream performance over the strongest single-trajectory average under matched budgets and keeps improving as budgets expand, with the advantage preserved after an identical post-training pipeline. These results position trajectory allocation and merging as a practical way to extend the compute-scaling frontier of mid-training beyond serial saturation.

0.21

RISK-KV: Quality-Aware Selective KV Cache Reconstruction for Distributed LLM Inference

cs.DC ·2026-10-21 ·Wang Yuekai
similarity 0.68
Abstract · 10 pages, 6 figures

Request migration and interruption recovery in distributed large language model (LLM) inference rely on historical key-value (KV) caches. Retaining or transferring a complete cache incurs substantial state overhead, whereas replaying historical tokens requires additional computation. This paper proposes RISK-KV, a quality-aware method for selective historical KV reconstruction in pretrained models. RISK-KV uses exact KV states on both sides of a target layer and cross-layer ridge regression to predict the missing layer's attention-projection input; it then folds in the original model's KV projection matrices to reduce predictor storage. Reconstruction risk is measured by the change in negative log-likelihood (NLL) caused by actual reconstruction, and low-overhead topology search with quality gating selects the layer groups to reconstruct. Independent tests on three language models show that representative recovery configurations omit 18.2 percent to 33.3 percent of historical KV, with perplexity changes below 0.5 percent. In a local request-recovery experiment with a 512-token history, RISK-KV achieves a 1.51 to 3.31 times speedup over full Token Replay. These results indicate that selective KV reconstruction can reduce historical cache overhead with small changes in predictive quality and improve request-recovery efficiency under the evaluated deployment conditions.

0.19