CS Paper Radar

CoBranchMR: Supporting Parallel Design and Conflict Resolution in Mixed Reality

Niloofar Sayadi, Kaiyuan Tang, Yunhao Xing, Simret Gebreegziabher, Chaoli Wang, Diego Gomez-Zara

cs.HC ·submitted 2026-09-23 02:08 UTC · v1
published

Abstract

We present CoBranchMR, a mixed reality (MR) system that enables distributed collaborators to work in parallel from different locations on the same digital representation of a physical object. CoBranchMR lets users branch an object into editable virtual copies, customize them independently, and then merge their work back into a shared object. When merging copies, the system displays potential conflicts on the object's surface and provides several resolution options. By adopting branch-and-merge workflows for embodied spatial collaboration, CoBranchMR introduces a new collaborative interaction model that supports parallel design, conflict resolution, and negotiation in remote creative work.

Comment
3 pages, 2 figures, accepted as a Demonstration paper at CSCW 2026
DOI
10.1145/3785651.3831419

Closest papers

Nearest neighbours by meaning across the whole index.

Remote Expert Evaluation of Tabletop Avatar Gaze Control in Asymmetric Multi-Scale MR--VR Collaboration

cs.HC ·2026-10-19 ·Carlos Mosquera, Neven Elsayed, Ernst Kruijff, Joseph Newman, Valeriya Lehrbaum +1 more
publishedsurvey similarity 0.59
Abstract · Accepted for ACM Symposium on Virtual Reality Software and Technology (VRST) 2026

This paper proposes an integrated setup for a multi-scale asymmetric collaboration scenario in the context of a remote-expert use case, focusing on the expert side. In this system, the remote expert (with an exocentric view in Mixed Reality (MR)) uses a Tangible User Interface (TUI) to precisely position and rotate their avatar within a scaled tabletop World-in-Miniature (WIM). Inside the WIM, the expert's avatar and the operator share the same scale and egocentric view, while the expert retains a global tabletop overview of the plant to support collaboration. Interviews with industry experts during the participatory design phase revealed the need for an egocentric view inside the plant on the remote-expert side to enable full collaboration. We designed and studied three interaction-visualisation combinations to integrate and control the expert avatar's gaze: VR (fully immersive with direct head control), Head (floating screen with direct head control), and Touch (on-avatar screen with touchpad control). We evaluated these methods with 29 participants across two fault-detection tasks: Same Machine, where both collaborators inspect the same machine, and Twin Machine, where they inspect identical machines in separate locations. The VR condition, which combines immersion, direct head control, and a full-scale view, yielded the strongest overall performance and user experience, while the tabletop avatar setup was well received for collaboration. Our findings inform the design of gaze-control techniques for asymmetric MR-VR collaboration and reveal challenges and opportunities for future work.

0.23

ReRoom: Blending Virtual and Physical Contexts for In Situ Room Planning in Mixed Reality

cs.GR cs.HC ·2026-09-03 ·Hongliang Yang, Yanjing Xu, Anhang Zhang, Hui Ye, Pengfei Xu
similarity 0.59
Abstract · 19 pages, 8 figures; supplementary materials included

Planning a real domestic space is an in situ authoring process: users evaluate candidate layouts at true scale, refine their intent, and carry accepted decisions into later iterations. Existing approaches either separate layout editing from the physical room or provide limited support for evaluating and refining whole-room proposals in situ. We present ReRoom, a mixed-reality system for in situ room-layout authoring. ReRoom presents a shared layout state through a virtual room proxy spatially registered to the target room, allowing interaction and layout generation to remain grounded in the physical context. Users refine the current proposal through direct manipulation or language and preserve accepted placements, allowing each generated update to continue the same evolving design. To balance layout quality with generation efficiency, ReRoom uses a skill-guided layout agent whose room-layout design skill operationalizes three principles that we formulate by synthesizing established interior-design guidance for real-room layout generation. The skill grounds these principles in a normalized representation of the scanned room and reusable geometric checks. Evaluations show that ReRoom produces high-quality layouts for non-rectangular rooms, while its in situ workflow improves the room-planning experience over an otherwise equivalent off-site VR workflow. Code will be released upon acceptance of the paper.

0.36

How Children Collaborate within Programmable AR Environments with Co-Located Collaborative Features

cs.HC ·2026-08-11 ·Romina Mahinpei, Diya Ajay Hundiwala, Sandy Zhang, Lana Glisic, Andrés Monroy-Hernández
published similarity 0.58
Abstract · Published at CSCW 2026

Programmable augmented reality (AR) environments are emerging as a promising way to support children's creative learning through embodied interaction with digital characters and physical space. At the same time, AR systems are increasingly capable of supporting co-located collaborative experiences. However, little is known about how children collaborate within programmable AR environments offering co-located collaborative features. In response, we extended Capybara, an existing programmable AR application for children, with co-located collaborative features supporting shared visibility and interaction across devices. We then conducted workshops with 9 children to examine whether and how collaboration emerges during use. Across our workshops, collaboration was often lightweight and implicit, emerging through three complementary forms: parallel play with social awareness, iterative remixing, and spontaneous peer support. Together, our findings provide insights for designing future child-centered programmable AR systems that better support co-located collaborative experiences.

0.19

Generative AI and Extended Reality in Collaborative Architectural Design Education: An Exploratory Studio Study

cs.HC cs.AI ·2026-09-11 ·Yao Xiao, Max Chen, Yichen Li, Nathaniel Powers, Maxwell Wiesenfeld +3 more
similarity 0.56
Abstract

Architectural design education relies heavily on visual ideation and representation to support collaborative learning in studio environments. Recent advances in generative artificial intelligence (GenAI) and extended reality (XR) offer new opportunities for rapid idea exploration and immersive spatial visualization. This exploratory mixed-methods classroom study investigated how GenAI-assisted multi-user XR influenced collaborative architectural conceptual design. We developed GenARch, a pipeline that integrates GenAI-based visual generation with collaborative XR environments, and deployed it in an undergraduate architectural design studio. Twenty-seven students formed seven self-selected design teams; four teams incorporated GenARch into their usual course workflow to support collaborative ideation and visualization, while three teams continued the same course workflow without GenARch. Pre- and post-intervention surveys assessed design self-efficacy, attitudes toward collaborative learning, and teamwork; a seven-member panel evaluated team design presentations; and GenARch teams participated in group interviews. The quantitative results showed larger relative declines in confidence and outcome expectancy for the GenARch condition and a positive difference-in-differences estimate for perceived conflict management, while panel-rated presentation outcomes were not significantly different between conditions. Interviews indicated complementary roles for the technologies: GenAI supported idea externalization and visual reference generation, whereas XR supported spatial, contextual, and scale-based evaluation. Students also reported challenges related to control, dimensional fidelity, shared attention, and motion comfort. These findings highlight both opportunities and limitations when GenAI and XR are incorporated into collaborative design education.

0.27

Feel My Focus: Gaze-Triggered Digital Twin Creation for Remote Collaboration

cs.HC cs.CVcs.GR ·2026-11-08 ·Shih-Yu Ma, Suibi Che-Chuan Weng, Ming-Yuan Pai, Tom Yeh, Ellen Yi-Luen Do
top venue similarity 0.55
Abstract · 5 pages, 3 figures

We present Feel My Focus, a gaze-triggered mixed reality (MR) demonstration that enables rapid creation and sharing of lightweight 3D digital twins during remote collaboration. Unlike systems that use gaze primarily as a referential pointer, Feel My Focus treats sustained visual attention as a generative action: a fixation on a physical object initiates single-image capture, attention-guided segmentation, and one-shot 3D reconstruction, allowing a remote partner to inspect and discuss the object in situ. The system integrates gaze-tracking glasses, modular segmentation and reconstruction services, and an MR client for runtime streaming and interaction. This design prioritizes responsiveness and experiential continuity over photometric fidelity. We report observations from a public demonstration, highlighting design trade-offs, failure modes, and user control considerations for deploying gaze-triggered generative systems in real-world collaborative settings.

0.32

MRPilot: Supervising and Intervening LLM-Based Multi-Robot Teams through Mixed Reality

cs.HC cs.RO ·2026-10-05 ·Xiaoran Yang, Xun Qian, Yang Zhan, Nathan Tran, Ziyi Liu +1 more
similarity 0.55
Abstract · 15 pages, 8 figures

Large language models (LLMs) let users direct heterogeneous multi-robot systems (MRS) through natural language, but make task interpretation, robot assignment, and coordination difficult to inspect and change. Based on a formative study with 12 non-expert users, we developed MRPilot, a mixed reality system organized around four stages of supervision and intervention. MRPilot represents robot-team plans and execution states as structured commitments shared across synchronized situated and overview views. Across four stages, it helps users resolve ambiguous references (Forming), review plans before execution (Reviewing), monitor distributed execution (Following), and make robot-level or team-level changes when problems arise (Repairing). In a within-subjects study with 20 participants in a virtual reality-simulated home, MRPilot reduced workload, increased situational awareness, transparency, trust, and perceived control compared with a conventional LLM-based conversational interface using the same LLM planner and robot capabilities. We provide design implications for multi-scale intervention, adaptive supervision, and calibrated reliance in LLM-based MRS.

0.28

Exploring Avatar-Based Representations of Desktop Analytical Workflows for Asymmetric Collaborative Visual Analytics

cs.HC ·2026-09-14 ·Tiansu Chen, Yalong Yang, Wai Tong
similarity 0.55
Abstract

Collaborative visual analytics increasingly occurs across asymmetric desktop-VR settings, with desktop analysis offering precision and efficiency and VR providing spatial and embodied affordances. However, maintaining workspace awareness remains challenging because desktop collaborators are often represented in VR only through indirect cues such as perspective sharing, shared visualization state, or lightweight cursor traces, which do not convey their ongoing analytical activity in a VR-native manner. To address this gap, we present Desk2Avatar, which explores avatar-based representations of desktop analytical workflows in VR. We introduce two representation strategies, Distanced and Embodied, inspired by remote pointing and direct manipulation. We conducted a within-subject study with 18 participants comparing these strategies against a depth-adaptive cursor baseline. Our findings show that avatar-based representations improved collaborator awareness and attentional guidance over cursor cues, while excessive embodiment introduced occlusion, distraction, and additional workload. Finally, we discuss design implications for future desktop-to-VR representations, focusing on balancing collaborator presence, attentional guidance, and workspace readability.

0.24

From Artifacts to Coordination: Exploring How Shared Canvases Drive Collaboration during Group Ideation

cs.HC ·2026-10-29 ·Saramsh Gautam, Andrew M. Webb, Mahmood Jasim
published similarity 0.55
Abstract · Accepted to ACM GROUP 2027. To appear in Proc. ACM Hum.-Comput. Interact. 11, GROUP (January 2027). 21 pages, 9 figures. DOI: 10.1145/385940…

Recent years have seen a surge in tools that support collaborative ideation through shared canvases. While these canvases offer flexible workspaces, how collaborators leverage them to iteratively develop ideas by externalizing thoughts, organizing artifacts, and coordinating tasks remains underexplored. To address this gap, we conducted an exploratory study with seven triads planning a travel itinerary using an infinite-canvas technology probe. Drawing on participant interviews and video analysis of their canvas interactions, we observed that collaborators contributed in parallel and arranged artifacts freely without a predefined structure. This spatial organization allowed collaborators to coordinate implicitly, made less vocal participants' contributions visible, helped distinguish private exploratory regions from shared working areas, and supported the emergence of distinct roles through repeated patterns of contribution. We discuss design implications for canvas-based ideation tools, including surfacing unnoticed contributions, supporting emergent roles without formalizing assignments, and keeping spatial cues legible for AI integration in collaborative canvases.

0.45