CS Paper Radar

Anchor-Free Hidden-Target Seeking via Certified Self-Calibration under Correlated Odometry

Yash Bagla

cs.RO eess.SY ·submitted 2026-08-26 11:47 UTC · v1

Abstract

We study hidden-target seeking in an anchor-free regime where neither the vehicle, the relay, nor the target has an accessible global pose. The vehicle never senses the target directly; it receives only range-bearing observations through a single relay of unknown position and orientation, with motion known only via integrated body-frame odometry. Absolute localization is fundamentally impossible: the joint configuration retains an exact three-dimensional SE(2) gauge no estimator can resolve. Yet the quantities needed for control remain fully recoverable: motion collapses calibration to a task-relevant quotient, the relay-to-odometry yaw and target displacement, identifiable in closed form from two distinct vehicle views. We introduce an O(K) multi-view self-calibration estimator with an exact first-order yaw-uncertainty certificate that propagates the cross-view correlations integrated odometry induces: the full certificate attains 95.0% pooled coverage at the nominal 95% level, versus 82.1% when correlated poses are treated as independent. The certificate drives a hybrid policy that excites until calibration is trustworthy, refuses uncertified estimates, seeks using continuously re-measured geometry, and detects relay-frame changes via persistent certified inconsistency, avoiding unbounded dead-reckoning drift. Across 200 randomized closed-loop trials, the method attains 0.064 m median station error versus 0.065 m for an oracle given the true relay yaw, despite 27 m median dead-reckoning drift over long horizons; 90 physics-based ROS 2/Gazebo trials retain 30/30 success under nominal operation, communication degradation, and relay-frame disturbances. These results show global localization is unnecessary for reliable hidden-target seeking under this single-relay model, even when both the sensing infrastructure and the vehicle's own reference frame are uncalibrated.

Comment
16 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Trajectory-Induced Self-Calibration for Hidden-Target Localization Through an Unknown-Pose Range-Bearing Relay

eess.SY cs.RO ·2026-08-10 ·Yash Bagla
similarity 0.73
Abstract · 10 pages, 4 figures, 9 tables

This paper studies hidden-target localization from range-bearing packets reported by a relay beacon whose global position and yaw are unknown. The vehicle knows its own trajectory but never directly senses the target; the relay packet contains only local-frame range and bearing to the vehicle and to the hidden target. Unlike bearing-only network localization, relative-frame localization, and target-enclosing control, the target is neither directly observed in the vehicle frame nor treated as a node in a relative-sensing graph. The main result characterizes the minimal motion that removes the resulting calibration ambiguity: one vehicle pose leaves a continuous yaw/translation/target gauge, whereas two distinct vehicle-relative observations from one unknown-pose relay constructively determine relay yaw (modulo 2 pi), relay position, and the anchored target in the noiseless case. A local rank corollary, a shared-target multi-beacon extension, and a trajectory-spread conditioning lemma connect relay self-calibration to finite-window excitation and native range-bearing estimation. In Monte Carlo evaluation the estimator recovers the hidden target with 5.5 mm RMSE, five times below the 30 mm per-packet range noise and thirteen times more accurate than a naive EKF baseline; it converges to the same accuracy from 2 m target offsets and 2.4 rad yaw errors, and Huber weighting preserves millimeter accuracy under 10% outlier corruption that drops the unprotected estimator to a 0.10 success rate. Trajectory spread predicts estimator quality: the two weakly excited trajectories carry condition numbers above 100 with success rates of 0.82 and 0.70, while every well-excited trajectory attains full success.

0.44

Excitation-Supervised Closed-Loop Self-Calibration and Target Seeking for an Unknown-Pose Range-Bearing Relay

eess.SY cs.RO ·2026-08-12 ·Yash Bagla
code/data similarity 0.69
Abstract · 12 pages, 6 figures, 5 tables. Code and data: https://github.com/yashbagla321/excitation-supervised-closed-loop (archived at https://doi.org…

A vehicle seeking a hidden target through a range-bearing relay of unknown position and yaw must decide, online, whether its own motion has already made the relay calibration trustworthy, and what to do when it has not. Two distinct vehicle-relative observations are known to remove the calibration gauge and make the target's relay-local packet globally actionable (arXiv:2608.09464), but that statement is static: it classifies a stored window only after the fact. This paper supplies the closed-loop layer: we show that the trajectory-spread margin $S_v$ that governs identifiability is simultaneously a finite-noise seed-accuracy bound, a local-vector variance decomposition, and a circle-geometry excitation budget, and we use it to supervise an excitation-reset controller. An excitation-supervised algorithm retriggers exploratory motion whenever the spread certificate is insufficient, projecting the target-seeking input away from the excitation's push, and otherwise proceeds to unrestricted target seeking. Under explicit sampling assumptions the supervision rule provably acquires any required excitation in finite time; in the noiseless local regime with positive excitation decay, estimator convergence yields target-seeking convergence after certification; and the threshold is selected from a desired calibration-accuracy level rather than chosen heuristically. Closed-loop simulation, paired Monte Carlo comparisons, a spread-threshold ablation, and a ROS 2/Gazebo software-in-the-loop experiment with sensing delay validate the approach. A decay-rate sweep shows that supervision matters when a fixed schedule's decay outruns the unknown time-to-adequate-excitation: over 100 paired trials the fixed baseline's yaw RMSE rises from 0.010 to 0.065 rad and success falls to 56%, while target-tracking error remains insensitive; supervision keeps yaw RMSE between 0.0095 and 0.0191 rad with 100% success.

0.64

NIF-VIO: Visual--Inertial Odometry Across Inertial and Non-Inertial Reference Frames

cs.RO ·2026-11-10 ·Zichao Shu, Lijun Li, Zhuochen Li, Zetao Chen, Jianyu Wang
similarity 0.64
Abstract

Conventional visual--inertial odometry (VIO) assumes that observations from cameras and an inertial measurement unit (IMU) are jointly consistent in an inertial reference frame. However, this assumption breaks down under non-inertial conditions. Inside accelerating or rotating carriers, visual observations of the interior reflect carrier-relative motion, while IMU measurements contain additional carrier-induced components, which can compromise conventional fusion. We therefore present NIF-VIO for localization relative to the local environment across inertial and non-inertial reference frames. It adapts visual--inertial fusion based on measurement consistency. As inertial conditions change, early constraint isolation is combined with local reoptimization to limit error propagation before inconsistency confirmation and repair the affected local geometry. Under non-inertial conditions, a compact model with temporally shared parameters is introduced to account for carrier motion while preserving inertial information that complements visual constraints. Experiments on public benchmarks and a self-collected dataset demonstrate that NIF-VIO achieves competitive performance under inertial conditions and improved localization accuracy and availability under non-inertial conditions.

0.24

StreamRig: Exploiting Intra-Rig Geometry for Streaming Multi-Camera Odometry

cs.CV cs.RO ·2026-09-30 ·Yufei Wei, Shuhao Ye, Qi Wang, Xin Zheng, Qing Huang +2 more
code/data similarity 0.62
Abstract · 8 pages, 4 figures, 5 tables. Code: https://github.com/WeiYuFei0217/StreamRig

Mobile robots and vehicles carry synchronized multi-camera rigs, yet many streaming 3D foundation models are designed for monocular input, leaving efficient use of rig geometry a challenge. We present StreamRig, a freeze-and-stream framework that builds causal streaming odometry for calibrated rigs on a frozen multi-view 3D foundation model. The frozen front-end jointly perceives the synchronized views using rig calibration. A Rig-Resampler compresses their features, a CausalBridge applies causal attention with a key-value cache, and a lightweight head regresses rig poses. A periodic re-anchoring protocol supports stable pose estimation over long sequences. Only these modules are trained, 74.6M parameters in total, with relative poses as the sole supervision. Our two-stage training strategy combines group relocalization pretraining with causal rig training to transfer the geometric priors of the frozen front-end and the alignment ability of the pretrained modules to streaming odometry. We evaluate on NCLT, TartanGround, KITTI-360, and our self-collected humanoid-robot dataset ZJH, where training uses only simulation and real-world evaluation is zero-shot. Across all four datasets, StreamRig achieves lower translation and rotation drift than the evaluated non-oracle monocular streaming and rig-aware offline models, while maintaining low inference cost. Ablations and controlled camera-count experiments identify the sources of these gains. We further examine how longer training windows affect inference over longer horizons. Code has been released at https://github.com/WeiYuFei0217/StreamRig.

0.34

IMU-Free Body-Frame State Estimation with Sparse Scene Flow for Quadcopters

cs.RO cs.CV ·2026-08-21 ·Daniel Grønhaug, Sofie Markeset, Mathias Kolberg
similarity 0.61
Abstract · 56 pages, 5 figures, 2 tables. Evaluated on the VID dataset (arXiv:2103.11152)

We present a vision-only state estimation system for X-configuration quadcopters equipped with a canonical stereo camera pair and no inertial sensors. The system operates entirely in the body frame, requiring only synchronised stereo images and motor thrust commands. A continuous-discrete extended Kalman filter on a composite manifold state $\langle SE(3), \mathbb{R}^3, \ldots \rangle$ maintains estimates of body-frame pose, velocity, angular velocity, gravity, and disturbances, using stationary scene points as implicit inertial references. Feature points are detected (FAST, Shi-Tomasi), tracked temporally (SSD, Lucas-Kanade) and matched across cameras (NCC), with search regions predicted from filter-derived pose and point uncertainty. Chi-squared gating on the normalised innovation admits only stationary points to the filter. The system also produces a sparse 3D point cloud carrying per-point position, velocity and joint covariance. These come from a 4-view (two stereo pairs at two timestamps) full bundle adjustment that jointly estimates position and velocity from stereo disparity and temporal parallax, with the filter-derived relative pose as a prior. Feature points in the EKF do not enter the solver; their information is reflected through the pose prior. Point cloud density is spatially adaptive: an external focus point directs allocation, producing dense coverage in the region of attention and sparse coverage elsewhere. The output is a body-frame state estimate, a calibrated pose change, and a sparse scene flow. It is intended as a measurement source for a downstream world model anchored in the current body frame, without dependence on GPS, IMU, or any world-frame infrastructure, though the architecture accommodates their future integration.

0.28

AnyVIO: Feed-Forward Streaming Visual-Inertial Odometry Across Platforms

eess.IV ·2026-11-19 ·Omoruyi Atekha, Marcus Greiff, Ray Zhang, Luca Carlone
similarity 0.61
Abstract · 11 pages

Geometric foundation models (GFMs) estimate camera mo- tion and scene structure from images without requiring ex- pert parameter tuning, but either lack metric scale or rely on learned priors to infer scale, which is unobservable from monocular images alone. Inertial sensing offers a way to observe metric scale, but existing methods add inertial in- formation through a filter or factor graph, which reintro- duces bespoke parameter tuning and optimization costs that can grow with the trajectory. To bridge this gap, we present AnyVIO, a real-time, feed-forward streaming model for monocular visual-inertial odometry (VIO), which combines a streaming GFM with an inertial foundation model (IFM). Both the GFM and IFM predict the metric motion between consecutive frames, and a lightweight learned fusion head quantifies the reliability of each estimate and blends them in a single forward pass. Across nine datasets recorded from cars, legged and ground robots, and handheld and head- mounted devices, AnyVIO reduces the metric position error of its visual model by 36% while publishing each pose esti- mate 70 ms after an image is received. We further deploy AnyVIO onboard two real vehicles at up to 140 km/h, where it remains accurate in poor lighting and heavy dust.

0.20

SSIO: Self-Supervised Inertial Odometry

cs.RO ·2026-10-19 ·Yuheng Qiu, Yutian Chen, Carlton Cort, Weison Huang, Shibo Zhao +8 more
similarity 0.61
Abstract

Learning inertial odometry for a new platform usually requires ground-truth trajectories. We show that an inertial odometry model can instead be trained from scratch by a myopic teacher that integrates the IMU over each short window independently, a scheme we call integration self-supervision. Interestingly, although supervised only by short-window velocity changes, the student learns to directly predict velocity, and does so more accurately than its integration teacher. Pose graph distillation then refines the model with sequence-consistent targets from a pose graph over many windows. Training on a new platform therefore no longer requires collecting ground-truth trajectories, but only calibrating the IMU and recording data during normal operation. Across six datasets spanning pedestrians, drones, quadrupeds, and a humanoid, the same recipe with no velocity or position labels trains models that come within 0.07~m/s average velocity error of a same-architecture supervised baseline.

0.25

UniPoint: Unified Point-Level Sensor Fusion for Humanoid Locomotion Across Challenging Terrains

cs.RO ·2026-09-20 ·Sicen Li, Zhen Chu, Chao Li, Qiuguo Zhu, Jun Wu
similarity 0.61
Abstract · 8 pages, 9 figures, 6 tables. Submitted to IEEE Robotics and Automation Letters (RA-L). Video: https://youtu.be/Rd9YyfOxvmY

Open-world deployment requires humanoid robots to cross highly heterogeneous terrain safely, with perception that simultaneously provides wide coverage, local accuracy, and redundancy against sensor failure. Existing approaches struggle to satisfy all three: one forward depth camera or nearby height sampling covers too little; odometry-corrected elevation maps drift under aggressive motion and miss thin vertical structures; image-level encoding costs grow with camera count. We present UniPoint, a humanoid whole-body locomotion framework built on multi-source point-level sensor fusion. Measurements from a 360° light detection and ranging (LiDAR) sensor and two depth cameras are early-fused into one base-frame point set. Voxelization resamples it to a fixed number of tokens encoded by linear self-attention and proprioception-queried cross-attention, decoupling forward cost from sensor count. The point set retains standing thin barriers; a single-modality failure removes only part of the tokens, so the policy degrades gracefully. A single training run with terrain-aware rewards, perception-degradation injection, and domain randomization produces one policy for all eight terrain types, deployed on an onboard RK3588 without fine-tuning. On a DR02 humanoid, 20 trials at each of nine real-world settings over seven terrain types validate the policy on 70-cm-high platforms, 100-cm gaps, thin barriers, and sparse or narrow footholds; it also generalizes zero-shot outdoors.

0.35