CS Paper Radar

I-SplineFlow: Learning Monotone Spline Stochastic Interpolant Schedulers for Few-Step Generation

Md Sakib Hossain Shovon, Md Rifat Ur Rahman, Md Abtahi Majeed Chowdhury, Yunhong Min, Jaesik Choi, Minhyuk Sung

cs.LG ·submitted 2026-08-23 13:01 UTC · v1

Abstract

Few-step generation with pretrained diffusion and flow models can be accelerated by lightweight training that optimizes the sampling trajectory rather than the network. A recent approach parameterizes the stochastic interpolant (SI) scheduler as a smooth curve whose control points enforce the three properties an SI scheduler must satisfy: fixed boundary conditions, a monotone signal-to-noise ratio (SNR), and differentiability. Existing parameterizations use globally supported polynomial bases, where every control point moves the whole curve and higher expressiveness needs a higher degree, which couples distant regions of the schedule during optimization. We introduce \emph{I-SplineFlow}, which parameterizes the scheduler with integrated monotone splines (I-splines). I-splines decouple the polynomial degree from the number of mixture weights, so support width and smoothness can be chosen per model at a fixed weight count, and the compactly supported derivative basis makes the scheduler Jacobian orders of magnitude better conditioned than a Bézier basis. Boundary conditions and a strictly monotone SNR hold by construction, with no ordering constraint on the parameters and closed-form velocity derivatives. Across diffusion (EDM) and flow (ReFlow, Simple ReFlow) models, I-SplineFlow improves few-step FID over Bézier scheduling in most settings, most clearly at the lowest NFEs, and trains in minutes. Ablations show that both the degree freedom and the monotonicity constraint are needed. The code will be released upon acceptance.

Closest papers

Nearest neighbours by meaning across the whole index.

Elliptic Sampling: Optimal Interpolant Schedules for Gaussians and Beyond

cs.AI stat.MLcs.LG ·2026-11-13 ·Cole Becker, Taylan Kargin, Kimia Hassibi, Asuman Ozdaglar, Pablo A. Parrilo
similarity 0.61
Abstract

Generative modeling based on stochastic interpolants requires specifying two key choices: an interpolant schedule bridging the initial and target distributions, and an efficient discretization of the resulting probability-flow ODE. In this work, we introduce a new framework for joint schedule/discretization design based on the analyticity properties of the (complexified) ODE trajectories, which in turn ensure good numerical behavior. Our formulation can be solved exactly via conformal mapping, yielding a natural family of variance-preserving elliptic schedules, parametrized by Jacobi elliptic functions. Pairing an elliptic schedule with a tailored discretization, we obtain Zoloflow, a new sampling algorithm closely connected to Zolotarev's optimal rational function approximants. Crucially, both the elliptic schedule and Zoloflow explicitly incorporate the condition number $κ$ of the target distribution and reduce to the classical trig schedule in the limit $κ\rightarrow 1$. For Gaussian targets, Zoloflow achieves minimax optimality among all oblivious score-span algorithms, attaining total-variation error $\varepsilon$ using $Θ(\logκ\,\log(\sqrt d/\varepsilon))$ (exact) score queries. For the log-concave case, the elliptic schedule allows sampling with at most $\varepsilon$ 2-Wasserstein-error by requiring merely $\widetilde{O}(\sqrt{d} \, \mathrm{polylog}(κ, 1/\varepsilon))$ score evaluations. Complementing these theoretical results, we empirically evaluate the elliptic schedule on general (non-log-concave) target distributions, including detailed comparisons with alternative schedule proposals on both synthetic benchmarks and existing image generation datasets.

0.25

Variational Trajectory Flow Matching with a Non-Linear Interpolant

cs.LO ·2026-11-19 ·Gurjeet Sangra Singh, Frantzeska Lavda, Alexandros Kalousis
similarity 0.60
Abstract

Simulation-free methods such as Trajectory Flow Matching learn dynamics by regressing the time derivative of a local interpolant placed between consecutive observations. The interpolant defines the regression target, and under sparse, irregular sampling, it underrepresents the dynamics and bounds what can be learned. We show that no fixed interpolant dominates: the best of linear, quadratic, spline and quintic changes with the system and with the sampling density. We propose to learn the interpolant instead. An amortized implicit neural representation (INR) is fitted to the training trajectories and frozen as a teacher supplying the target velocity to a learnable velocity field. We further frame the velocity field within a variational framework, yielding a probabilistic forecaster that, at inference, requires only the velocity field and no SDE solver. We evaluate our method on a range of dynamical systems: it consistently achieves high accuracy and more stable long-horizon rollouts under sparser observations, at matched velocity-field capacity.

0.27

Difficulty-Calibrated Interpolation Paths for Conditional Flow Matching

cs.CV ·2026-08-21 ·Airin Akter Tania, Md Raihan Khan
similarity 0.60
Abstract

Conditional Flow Matching trains generative models by regressing a network onto the velocity of a prescribed noise-to-data interpolation path. The interpolation schedule that shapes this path is known to affect convergence and sample quality, yet it is invariably fixed in advance, independent of both the data and the model. We show that the regression difficulty of Conditional Flow Matching varies systematically along the path, and we propose Difficulty-Calibrated Flow Matching, which derives the schedule from the model itself: a short pilot run with the linear path records the per-time loss, and the schedule is set to the quantile function of this difficulty profile, so the trajectory lingers where the velocity is hardest to learn. The method has a single hyperparameter, leaves the training objective and its gradient equivalence intact, composes with classifier-free guidance, and adds about two percent training overhead. In controlled experiments on CIFAR-10, MNIST, and Fashion-MNIST with an identical compact U-Net, the calibrated path attains the best FID on CIFAR-10 at full sampling budget and clearly outperforms all fixed schedules in the large-batch, few-update regime, precisely the setting where compute is scarcest.

0.46

Guidance Is a Field, Not a Scalar: Interval-Integrated Classifier-Free Guidance for One-Step Video Generation

cs.CV ·2026-11-05 ·Zijie Meng, Xixin Cao
publishedcode/data similarity 0.57
Abstract · 10 pages, 9 figures. Accepted to WACV 2027

One-step generators built on MeanFlow synthesize a video in a single function evaluation, yet inherit a rigid treatment of classifier-free guidance (CFG): the guidance scale is frozen during training or, at best, exposed as a single scalar. This conflicts with mounting evidence that the optimal guidance is not a constant but a field that varies with the noise level, with spatial content, and, for video, with frame position. Every existing remedy presupposes a multi-step sampler along which guidance can be re-scheduled--an assumption one-step models violate by construction. We resolve this tension through a single observation: because the MeanFlow target is an integral over a noise interval, an arbitrary guidance field can be absorbed into the target itself and compiled into one evaluation. We formalize this as the interval-integrated CFG identity, prove that the compiled guidance carries no schedule-discretization error and can thus match or exceed any finite multi-step sampler, and instantiate it as AGAVE, which equips the average-velocity field with a learnable temporal schedule, a free motion-saliency spatial modulation, and a frame-position asymmetry. Adding fewer than ten scalars at zero inference cost, AGAVE surpasses all one-step baselines on VBench, UCF-101 and MSR-VTT while matching multi-step guided sampling. Project repository: https://github.com/YMlinfeng/AGAVE.

0.41

Adaptive Second-Order Solvers for Fast Stochastic Diffusion Sampling

cs.LG cs.CLcs.CV ·2026-10-02 ·Ella Kemperman, Luca Ambrogioni
code/data similarity 0.57
Abstract · Submitted to ICLR 2027

Diffusion models rely on numerical solvers requiring time-discretization, which has a large influence on the tradeoff between sampling cost and quality. However, the computational difficulty of the reverse process varies along the sampling trajectory and across data distributions, making the choice of discretization important. We adapt proportional-integral (PI) step-size control to diffusion, using our diffusion noise-normalised error estimator. Unlike existing adaptive methods in diffusion that respond only to the current error, the PI solver also incorporates the previous error, yielding smoother step adaptation. We further show that these per-sample trajectories exhibit shared structure and can be aggregated into a fixed schedule that retains much of the benefit of adaptive sampling. We evaluate both approaches on natural-image and language datasets, in terms of quality, measured by FID at a matched number of neural network evaluations (NFE), comparing them with widely used stochastic solvers and schedules. For images, our fixed discretization outperforms the commonly used EDM schedule in terms of sample quality when used with the stochastic Heun sampler, and with the EDM-churn sampler at low NFE. Additionally, our PI adaptive solver obtains better FID than most stochastic and adaptive baselines, although it does not beat the EDM-churn sampler at low NFE. Moreover, we find our solver outperforms both the EDM and the entropy schedule on language diffusion at low-to-medium NFE in terms of perplexity, with the drawback of lower token entropy. Lastly, we find that the benefit of per-sample adaptivity is problem-dependent. It is highly beneficial in 1D toy examples, while only marginal for image and language data, where the average schedule sometimes even outperforms the PI-adaptive solver. Code is available at https://github.com/ellakemperman/adaptive-second-order-diffusion-solvers

0.59

Learned End-to-End Guidance Schedules for Diffusion Models

cs.LG ·2026-10-01 ·Aneesh Barthakur, Mathias Niepert, Luiz F. O. Chamon
similarity 0.56
Abstract

Diffusion models are a powerful generative paradigm used across multimedia and scientific applications. Guided diffusion methods impose requirements on the generation by adding the gradient of a differentiable loss (the guidance function) as a drift term during inference. The weight of this drift (the guidance scale) is critical for the trade-off between data quality and requirement satisfaction. To achieve both of these goals, guided diffusion must resort to small guidance scales and lengthy sampling, incurring high computational costs. This work proposes learned end-to-end guidance schedules (LEEGS) to achieve these objectives with fewer sampling steps. LEEGS trains a time-dependent schedule by minimizing the guidance function over a small set of examples using stochastic gradient descent. Backpropagating through guided sampling is computationally expensive, so LEEGS uses an approximation of the gradient that cuts training time by a factor of 4. We evaluate LEEGS on diverse guidance tasks, including (a) image inpainting, (b) noisy image inverse problems, (c) face-ID-guided generation, and (d) forward and inverse PDE problems, outperforming baselines at equal budget (50 or 100 NFEs), or matching constant guidance with only 10% of the steps.

0.24

Tikhonov-Stabilized Bezier Representation Forecasting for Training-free Diffusion Acceleration

cs.CV ·2026-10-12 ·Lei Zhu, Mujie Lin, Ruochong Zheng, Guangyi Wang, Hao Li +3 more
similarity 0.55
Abstract · 6 figures, 5 tables

Diffusion models, particularly Diffusion Transformers, achieve strong image and video generation quality but remain expensive at inference time due to repeated denoiser evaluations. Feature caching offers a deployment-friendly acceleration strategy by reusing or predicting intermediate representations without retraining the generator or modifying the sampler. However, existing cache-then-forecast methods often rely on Taylor-style finite-difference extrapolation, which can become unstable over longer cache intervals, and typically predict local module outputs whose errors may accumulate through subsequent denoiser blocks. We propose \textbf{BeziCast}, a training-free diffusion acceleration framework that forecasts output-proximal denoising representations using low-order B'ezier trajectories. BeziCast estimates B'ezier control points via Tikhonov-stabilized fitting, providing a smooth, capacity-controlled temporal parameterization that avoids explicit high-order derivative estimation and decouples trajectory capacity from cache-query density. To moderate aggressive extrapolation, we further derive equivalent forecasting weights and introduce a convex-hull-inspired guardrail that detects high-risk predictions and softly pulls them toward a conservative simplex-projected estimate. Extensive evaluations across advanced image and video diffusion models demonstrate the effectiveness of BeziCast. In particular, BeziCast accelerates FLUX.1 by up to (4.79\times) and HunyuanVideo by up to (4.11\times), while preserving substantially better generation quality than competing acceleration baselines.

0.22

Model-Aware Schedules Improve Generation via Fiberwise Optimal Transport

cs.LG cs.AI ·2026-09-10 ·Luyi Jia, Boyan Zhang, Yilun Liu, Steffen Rulands
similarity 0.55
Abstract · 11 pages, 2 figures. Keywords: Diffusion models; flow matching; schedule optimization; fiberwise optimal transport; time reparameterization;…

Diffusion and flow-matching schedules control the signal and noise coefficients that mix data and noise along affine probability paths. Minimizing a kinetic action defined on coefficient paths, motivated by optimal transport, helps explain strong baselines but remains model-agnostic and ignores prediction error. Here we introduce a model-aware schedule construction based on fiberwise optimal transport. At a fixed time and state on the probability path, compatible signal/noise decompositions form an affine fiber. We define a fiberwise prediction risk by averaging optimal-transport costs between the true and predictor-induced decompositions within these fibers. On a fixed coefficient curve, combining this risk with coefficient-path kinetic action yields a closed-form optimal time allocation. This construction extends to general linear prediction targets, and the risk profile can be estimated from an early baseline checkpoint. We evaluate DDPMs and flow matching across prediction targets, training configurations, risk-estimation checkpoints, datasets, and architectures. Our model-aware schedules consistently outperform strong baselines, including a 38.6% relative FID reduction for flow matching on CIFAR-10 at 16 function evaluations. Each model-agnostic kinetic baseline determines its own kinetic reference coordinate. In these coordinates, fiberwise-risk profiles from independently trained models in different settings align closely after normalization to unit area. The resulting schedule deformations used in training also align, suggesting empirical universality across the evaluated models and settings. Pretrained-checkpoint diagnostics extend this normalized-risk agreement to larger conditional latent diffusion and 2-RF models. A frozen analytic allocation template retains most of the model-aware improvement without further risk estimation or model-specific fitting.

0.49