CS Paper Radar

Physics-Informed Self-Supervised Learning for Joint Wire Calibration and Interaction Position Reconstruction in Multi-Wire Parallel Plate Avalanche Counters

Antoine Lemasson, Maurycy Rejmund

cs.LG nucl-exphysics.ins-det ·submitted 2026-09-23 16:18 UTC · v1

Abstract

Scientific instruments require accurate calibration to convert detector signals into reliable physical observables. Conventional calibration procedures typically rely on dedicated calibration measurements, analytical response models or labelled reference data, limiting their ability to adapt to changing operating conditions and detector aging. We present a physics-informed self-supervised learning framework that jointly performs wire calibration and interaction position reconstruction in Multi-Wire Parallel Plate Avalanche Counters (MWPPACs) without requiring labelled position measurements or dedicated calibration runs. The method formulates detector calibration as a latent optimization problem in which global wire gains and event-wise interaction positions are estimated simultaneously using supervision derived exclusively from detector geometry and charge-energy consistency constraints. A detector-independent neural network reconstructs sub-wire interaction positions from local charge distributions, eliminating the need to assume analytical induction profiles by learning the detector response directly from experimental data. The end-to-end differentiable framework enables continuous detector self-calibration while improving the uniformity and accuracy of position reconstruction. Experimental evaluation on the entrance MWPPAC tracking detectors of the VAMOS++ magnetic spectrometer demonstrates stable convergence, improved spatial homogeneity and enhanced position resolution. Beyond the detector studied, the method establishes a general framework for physics-informed self-supervised calibration of scientific instruments and is a step toward autonomous intelligent instrumentation capable of continuous adaptation during operation. In this paradigm, detector calibration is no longer a prerequisite for an experiment but an integral part of the measurement process itself.

Closest papers

Nearest neighbours by meaning across the whole index.

Automated Physics-Informed Neural-Networks-Based Calibration of Highly Segmented Silicon Telescopes

cs.LG physics.ins-detnucl-ex ·2026-09-15 ·M. Rejmund, A. Lemasson, P. Morfouace, D. Ramos, J. Taieb +1 more
published similarity 0.58
Abstract

Transfer and multi-nucleon transfer reactions are essential tools for probing nuclear structure and reaction dynamics, requiring precise determination of the identity, energy, and emission angles of reaction products. The increasing granularity of modern silicon telescope arrays enhances experimental capabilities but challenges detector calibration, as conventional channel-by-channel approaches become inefficient and difficult to scale. In this work, we present a fully automated, physics-informed calibration framework based on neural networks, specifically designed for highly segmented silicon detector arrays. The method formulates calibration as a global optimization problem, in which detector gains and geometrical corrections are determined simultaneously by minimizing the width of the reconstructed excitation energy under two-body kinematics constraints. The approach relies exclusively on experimental data and well-established physical principles, without requiring explicit modeling of detector response. A distinctive feature is the use of multiple neural network sub-models sharing a common loss function with embedded physics constraints, enabling coherent and self-consistent calibration across all detector channels. This strategy ensures scalability, robustness, and reproducibility, making it particularly suitable for next-generation detector systems with increasing complexity. The performance of the method is demonstrated using experimental data from the Particle-Identification Silicon-Telescope Array (PISTA) in high-resolution fission studies in inverse kinematics. The results show excellent agreement with theoretical kinematics, high-quality particle identification, and a significant improvement in calibration efficiency. The proposed framework provides a general and adaptable solution for the calibration of complex detector systems in modern nuclear physics experiments.

0.42

Uncertainty-Aware 3D Position Reconstruction in CZT Drift-Strip Detectors

cs.LG ·2026-11-01 ·Alejandro Valverde Mahou, Michał Kossakowski, Selina R. H. Owe, Rikke S. Klausen, Irfan Kuvvetli +2 more
similarity 0.56
Abstract

Accurate three-dimensional interaction-position reconstruction is important for CZT drift-strip detectors, but conventional methods can suffer from degraded performance in challenging detector regions, while learned models provide limited information about prediction reliability. We investigate two uncertainty-aware approaches: deep ensembles of point-estimation networks and simulation-based inference (SBI), which estimates a posterior distribution over interaction position. Both approaches are trained on physics-based simulations and evaluated on both synthetic and experimental data. On synthetic data, uncertainty from both methods correlates with positioning error, with SBI showing a substantially stronger relationship. On experimental measurements, the deep ensemble achieves improved $z$-position resolution, while SBI provides more informative uncertainty estimates that highlight regions of reduced positional information and discrepancies between simulation and the physical detector. These results demonstrate the complementary strengths of ensemble-based reconstruction and posterior inference for uncertainty-aware detector position reconstruction.

0.26

Self-Supervised Learning for Robust Resonance Mass Regression in Cascade Decays

cs.LG hep-ex ·2026-09-15 ·Ho Fung Tsoi, Alex Yang, Luis Felipe Gutierrez Zagazeta, Shion Chen, Dylan Rankin
similarity 0.54
Abstract · 9th Workshop on Machine Learning and the Physical Sciences (ML4PS 2026)

Reconstructing the mass of a heavy resonance from its decay products with missing energy is one of the central tasks that directly determine the sensitivity in new physics searches at collider experiments. Supervised learning approaches to this problem often struggle to generalize well due to the presence of various systematic uncertainties and distribution shifts. Exhausting all possible variations in the labeled data can be very compute-intensive, while a failure of the model to generalize can corrupt the reconstructed resonance widths that are critical in peak-hunting analyses. In this work, following the foundation model paradigm, we use a self-supervised approach to pre-train a transformer encoder with VICReg to learn an embedding invariant to various corruptions, then fine-tune it for mass regression on a heavy resonance with masses ranging from 2.5 to 6.5 TeV and a SUSY-like cascade decay into an eleven-body final state. We show that the pre-trained model reconstructs sharper resonance peaks and has a more stable performance under various realistic corruptions, compared to a supervised model of the same architecture trained on the same augmented data from scratch.

0.17

Calibration in One Go: Jointly Learning Accurate and Calibrated Neural Networks

cs.LG cs.AIstat.ML ·2026-10-09 ·Nektarios Kalampalikis, Pablo M. Olmos, Isabel Valera
similarity 0.52
Abstract · 27 pages, 7 figures

Neural networks (NNs), while highly flexible and versatile, are often poorly calibrated. Post-hoc calibration methods adjust the outputs of an already trained model using a separate calibration dataset and additional calibration parameters. This process adds overhead that requires separate optimization of the calibrator and subsequent model selection. In this paper, we show that standard (post-hoc) calibrators can be trained end-to-end with the backbone via a bilevel Stackelberg formulation. This formulation eliminates the need for a separate calibration set or a dedicated calibration loss by jointly optimizing accuracy and calibration using cross-entropy, introducing only one additional hyperparameter: the calibrator learning rate. Although our framework supports calibrators ranging from temperature and matrix scaling to NN layers, our results show that using the final classification layer itself as the calibrator yields accurate, well-calibrated models with no additional parameters. Our approach outperforms SOTA calibrators with minimal added complexity, while also avoiding the multiplicative overhead of separate calibration components in settings such as multi-task learning.

0.29

Fast and Precise Learned Charged-Particle Trajectory Regression at the Large Hadron Collider

cs.LG hep-exhep-phphysics.data-an ·2026-09-26 ·Jonathan Renusch, Benjamin Huth, Daniel Murnane, Eleni Xochelli, Doğa Elitez +7 more
similarity 0.52
Abstract

We propose a training recipe that treats charged-particle trajectory parameter regression on high-energy physics detector data as a sequence-modeling task. Kalman filters and linearized least-squares fits have been the classical standard approach for this task: they are optimal estimators for sparsely sampled linear-Gaussian data and are commonly used for trajectory parameter regression (fitting). The classical fitting techniques implemented for this domain reach a final precision of one part in $10^5$ through detailed modeling of detector geometry, material, detection effects and precise numerical integration of the equations of motion through the detector's inhomogeneous magnetic field. With this study, we demonstrate that using a bidirectional gated linear recurrent encoder, one is able to reproduce the full precision of classical track fitting techniques. Using a custom kernel, we also achieve significantly higher throughput during GPU inference, compared to classical fitting software running on similarly priced multi-core CPU servers representing typically employed hardware. Such a speedup would lead to considerable cost savings for the pattern recognition at the Large Hadron Collider. To our knowledge, this is the first end-to-end learned track fit to reach the full precision and, at the same time, offer the opportunity to reduce the computing costs.

0.14

A Real-World CAD Segmentation Benchmark: Comparing Rule-Based and Learning-Based Approaches through Hole Detection

cs.CV ·2026-10-09 ·Kai Schütte, Edgar Heinert, Matthias Rottmann
benchmark similarity 0.51
Abstract

CAD segmentation datasets are predominantly synthetic or automatically labelled, leaving it unclear how well existing methods transfer to real-world engineering tasks. Fastener-relevant hole detection represents one such task, requiring human annotation and exhibiting greater geometric complexity than commonly used benchmarks. We address this gap through three main contributions. First, we develop two task-specific rule-based methods, one graph-wire-search and one multi-view based, and complement them with a human-annotated benchmark dataset derived from engineering CAD data that also enables training of UV-Net and AAGNet, representative learning-based approaches for B-Rep segmentation. Second, we conduct an extensive experimental study including parameter optimisation, evaluation on our benchmark dataset, cross-domain generalisation on a synthetic dataset, and an assessment of the feasibility of the approaches at varying dataset sizes and IoU thresholds. Third, we provide evidence-based insights into the strengths and limitations of different approaches: rule-based methods generalise well without training data, with the graph-wire-search method favouring recall and the multi-view method favouring precision, whereas learning-based methods achieve strong performance with sufficient annotations but exhibit reduced robustness under domain shift. These findings highlight trade-offs between data requirements, and robustness, and provide guidance not only for hole detection, but more broadly for real-world CAD segmentation tasks.

0.14

Local Diagnostics of Learned Event Representations for Anomaly Detection at the HL-LHC

cs.AI hep-exhep-phphysics.data-an ·2026-10-09 ·Donatella Genovese, Philip Ploner, Simone Scardapane, Stefano Giagu, Thea Klaeboe Aarrestad
benchmark similarity 0.51
Abstract · Submission to SciPost

Anomaly detection, the identification of collision events that deviate from Standard Model expectations, is one of the most promising model-agnostic strategies for new-physics searches at the Large Hadron Collider. Searching for rare events in learned low-dimensional representations removes the need to commit to hand-crafted observables a priori, but sacrifices the immediate physical interpretation those observables provide. For anomaly detection to enter a discovery pipeline, flagged events must therefore be diagnosed locally, both to distinguish potential new physics from mismodeling or detector effects and to identify observables for targeted follow-up searches. We evaluate supervised and self-supervised neural embedding strategies on COLLIDE-2V, a 750-million-event dataset simulated under realistic High-Luminosity LHC conditions, using the reconstruction error of an autoencoder trained in the learned latent space as the anomaly score. Across the configurations and benchmark signals considered, supervised objectives, which exploit simulation process labels during training, generally outperform their self-supervised counterparts and, in their best configurations, improve on an autoencoder trained directly on kinematic features, raising the signal efficiency at 10% background acceptance on all held-out processes. We further introduce a local diagnostic pipeline that fits a Gaussian Mixture Model to the SM latent space, profiles each component through high-level observables without process labels, localizes the flagged events, and ranks observables by their local discriminating power. The ranking recovers the defining kinematics of the held-out processes, while correlating the anomaly score with the same observables quantifies how closely the score tracks them, revealing cases where the most discriminating observable is not the one the score follows most closely.

0.11

Building heterogeneous multistep workflows in automated microscopy: reward design and knowledge transfer for autonomous structure property discovery

cs.LG ·2026-11-08 ·Sergei V. Kalinin
similarity 0.51
Abstract

Autonomous microscopy can turn fast acquisition into scientific progress when it decides not only where to measure, but also what information to acquire, at what scan rate, and when to recalibrate the instrument. We develop a budget constrained framework for such multistep structure-property workflows. It combines explicit scientific rewards, action costs, instrument observation models, transfer of pre experiment knowledge into the online campaign, and evaluation kept independent of the controller. The transferred knowledge includes predictor accuracy and computational cost, empirical learner maturity functions that weight model-derived rewards, and drift characteristics established before controller training. Using a real electron energy-loss spectroscopy dataset, we run two complementary campaigns. In the first, the controller chooses between imaging and spectroscopy, image size, and scan speed. In the second, the instrument drifts and the controller also decides when to recalibrate. The campaigns show that response discovery and structure-property learning favor different surrogate models and acquisition strategies. They also show that simple acquisition rules form strong, practical baselines. Independent error analysis reveals where model uncertainty is and is not a reliable learning signal. In the drift campaign, explicit registration greatly improves positional accuracy, and the framework measures what this costs in spectroscopy throughput. Together, these results provide a reproducible way to design, compare, and audit autonomous experiments, and they define what microscopes must provide for deployment: independently executable actions, characterized scan and detector responses, timestamped registration telemetry, and complete action records.

0.20