CS Paper Radar

Human-in-the-Loop Geospatial Annotation for Rapid Dataset Construction in Field-Deployed UAV Systems

Morgan Masters, Adam Korycki, Nikolaas Bender, T. Luca Altaffer, Nick Kuipers, Colleen Josephson, Steve McGuire

cs.RO ·submitted 2026-09-23 20:25 UTC · v4

Abstract

Real-world perception systems must adapt to changing environments, but manual image annotation cannot scale to field data volumes. We present BirdsEye, which shifts expert annotation from images to the field: an operator records target locations in world coordinates using RTK positioning and calibrated projective geometry propagates each observation to all frames where the target is visible. To quantify how well physical annotations align with image observations, we derive a first-order mapping from camera-pose uncertainty to pixel uncertainty and validate it against Monte Carlo simulation. This mapping is linear in the six per-axis pose variances, so it inverts into a sensor design tool: we give a sufficient condition converting an annotation tolerance into a convex set of admissible pose-noise budgets, a closed-form largest admissible scaling of a deployed sensor suite, and a unique per-axis pose specification under an equal-budget-share allocation. We also analyze the planar-surface approximation underlying the projection, which holds up to 10 degrees of terrain slope. By direct measurement, we show that system projection accuracy is sub-decimeter (sub-30 pixel) at AGL altitudes of 10-20m under conditions excluding sustained yawing. During an in-field case study across three agricultural sites, two field workers produced 12,524 annotated frames carrying 55,600 labels in roughly 12 hours (25.5x per-worker rate increase over manual labeling). Detectors trained on imagery collected by this workflow recovered 56-89% of in-view surveyed targets at a geographically distinct farm, at pre-registered operating points; human review of the leading configuration estimates detection precision at 83-87%, spanning three tie-break conventions for clusters carrying contradictory human verdicts.

Comment
30 pages, 10 figures (plus 2 in appendix)

Closest papers

Nearest neighbours by meaning across the whole index.

Marker-Constrained Pose-Graph Correction for Cross-Platform Georeferencing in GNSS-Denied Environments

cs.RO cs.MA ·2026-08-17 ·Marco Giberna, Jose Luis Sanchez Lopez, Holger Voos
published similarity 0.68
Abstract · 14 pages, 5 figures, 5 tables, submitted to SPIE Security + Defence conference

Autonomous operation in GNSS-denied environments requires heterogeneous mapping pipelines to maintain a consistent spatial reference. This paper presents a framework using camouflage-matched fiducial markers fabricated from Cholesteric Spherical Reflectors (CSRs) as pre-surveyed visual anchors. The anchors georeference both a lightweight LiDAR-odometry trajectory and a dense RTAB-Map reconstruction, allowing their outputs to be expressed in a common LUREF frame (geodetic coordinate reference system used in Luxembourg) without requiring GNSS measurements during operation. The method combines coarse similarity alignment with marker-constrained pose-graph optimization. We evaluate it using two handheld acquisition sessions with ground-level and elevated motion profiles emulating UGV and UAV operation. A single iMarker was relocated among six surveyed positions, with the first position revisited to quantify drift correction. Marker-anchor correction reduced revisit inconsistency by 97.9% and 99.1% for the UAV- and UGV-emulating sessions, respectively, and improved held-out anchor prediction compared with one-time alignment. Separately georeferenced dense reconstructions achieved a median cross-session nearest-neighbour distance of 58 cm without explicit cross-session registration. Marker processing operated in real time, while trajectory correction required less than 0.25 s per session. These results demonstrate a proof of concept for georeferencing lightweight odometry and dense reconstructions using visually unobtrusive, pre-surveyed anchors during GNSS-denied operation.

0.45

Robust Validation to Geometric Perturbations for Autonomous Pose Estimation

cs.CV ·2026-08-21 ·Gregoire Theau, Melanie Ducoffe
position similarity 0.67
Abstract · 15 pages, 7 figures

Deploying autonomous systems in safety-critical domains demands guaranteed robustness against physically plausible geometric perturbations rather than abstract pixel-wise noise. In vision-based navigation and autonomous landing, machine learning components require rigorous validation under dynamic operational conditions such as camera rotations and lighting shifts. Extending findings on the failure of first-order spatial attacks in classification, we show that standard gradient-based heuristics (e.g. APGD) similarly fail on for pose estimation, often performing worse than a simple random sampling baseline. To overcome these optimization bottlenecks, we reformulate pose estimation robustness within the framework of Global Lipschitzian Optimization (GLO). We argue that GLO offers a principled approach to robust validation, effectively localizing global optima with strong theoretical convergence guarantees. We evaluate this framework on a YOLOv8-Pose keypoint detector with a Perspective-n-Point (PnP) solver against rotation and contrast. In our evaluations, GLO successfully isolates critical failure modes where position deviations exceed safe operational limits, while rapidly pruning the search space by over 80%. To the best of our knowledge, this is the first study to extend geometric robustness validation to continuous keypoint regression and deep object detection, establishing a practical step toward certifying robust autonomous perception.

0.31

Sensor-Layout-Agnostic Navigation via Geometric Observation Canonicalization

cs.RO ·2026-10-06 ·Welf Rehberg, Kostas Alexis
similarity 0.65
Abstract

Existing visual navigation policies are inherently bound to fixed camera configurations, creating a fundamental barrier to zero-shot deployment across heterogeneous robot sensor layouts. To overcome this limitation, we present an embodiment-informed navigation policy capable of generalizing across diverse depth sensor configurations on a specific aerial platform. Instead of implicitly learning spatial alignments, our approach explicitly unprojects depth measurements from arbitrary depth sensor payloads, varying in sensor count, mounting extrinsics, and intrinsics, into a shared robot-centric frame, stitching them into a unified spherical range image and a binary validity mask. This mask allows the downstream policy to explicitly distinguish covered space from unobserved blind spots. Trained via reinforcement learning with aggressive camera randomization, our policy generalizes zero-shot to unseen layouts featuring up to seven cameras, scaling success rates from 78% to 95% as total spatial sensing coverage increases. Finally, real-world flight trials on a physical quadrotor, conducted in an obstacle-filled corridor and an outdoor forest, validate the policy's zero-shot transfer across camera configurations and its resilience to sudden online sensor dropouts.

0.19

Towards Agile Vision-Based Multi-UAV Flight: Revisiting State Estimation

cs.RO ·2026-09-30 ·Michal Pliska, Matouš Vrba, Ondřej Víta, Martin Jiroušek, Viktor Walter +1 more
publishedbenchmark similarity 0.64
Abstract · This work has been accepted to the IEEE for possible publication (IROS 2026)

Agile multi-UAV flight requires accurate and low-latency onboard estimation of the kinematic states of neighboring UAVs for collision avoidance, motion coordination, etc. Most vision-based approaches rely on position-only measurements, inferring velocity and acceleration indirectly from displacement. We show that this introduces a fixed structural delay in the estimation of higher-order states, which limits the achievable agility. To address this, we propose to integrate tilt measurements, provided by a state-of-the-art visual detector, which inform about the thrust direction of co-planar multirotor UAVs. We benchmark four position-only and five pose-aware estimators, including a novel formulation of a linear thrust-constraining Kalman filter, on two real-world and one high-fidelity photorealistic simulated dataset over different levels of agility (3-21 m/s^2). In our setup, pose-aware estimation consistently reduces the average velocity and acceleration estimation errors by 40% and 57% across the three datasets with the proposed KF formulation outperforming the other estimators. Position-only filters exhibit a constant ~300 ms delay in acceleration step response independent of agility, whereas the tilt-constrained estimators operate near the physical response limit given by the camera frame-rate by observing the change in thrust direction before the displacement accumulates. In a closed-loop leader-follower simulated experiment with NMPC control, position-only estimation of the leader's state fails to facilitate stable hovering of the follower, while the proposed estimator enables tracking of lateral maneuvers exceeding 2g of acceleration.

0.26

AVID: A Weakly Aligned RGB-Infrared Dataset and Perturbation Benchmark for Tiny Aerial Targets

cs.CV ·2026-10-29 ·Dharini Raghavan, Vishnu Rao, Sethu Selvi S
benchmark similarity 0.63
Abstract · 23 pages, 8 figures

Long-range detection of small drones is complicated by their visual similarity to birds and by the limited detail available from ground-based cameras. Combining visible and infrared observations offers complementary information, but their usefulness depends on target size, cross-modal alignment, and image quality. We present AVID, a benchmark for studying these factors using real RGB-infrared bird-drone surveillance footage originating from the Drone Detection Dataset and curated for the IEEE ICIP 2025 Video and Image Processing Cup. AVID comprises 32,040 corresponding frame pairs from 115 videos, with 35,952 existing bird and drone annotations at $320\times256$ resolution. Targets occupy an unusually narrow size range: 68.1\% have a geometric-mean bounding-box side of 8--16 pixels, and 99.0\% meet the COCO small-object criterion. To characterize the geometric difficulty of combining the modalities, we introduce an object-relative alignment ratio and an alignment burden curve. In a sample of 300 frame pairs, 32.3\% have estimated global translations greater than 5 pixels; among the 264 pairs with matching annotations, 16.3\% exceed one median target side. We further introduce AVID-C, which simulates seven families of image degradation at five severity levels independently in RGB, infrared, or both. A fixed-feature analysis examines how scale, degradation, and added cross-modal shifts affect fitted bird-drone class overlap. At 12--16 pixels, the Bhattacharyya error bounds are 0.148 for RGB, 0.198 for infrared, and 0.046 for their combined features. These values describe separation in the specified feature and density models, not detector accuracy. Together, AVID and AVID-C support scale-aware, alignment-aware, and sensor-specific studies of tiny aerial targets.

0.23

SatFix: Absolute Visual Localization of UAVs in Satellite Maps from a Single Oblique Image

cs.CV ·2026-10-08 ·Jiarui Zeng, Kun Shi, Chiman Vong, Zhedong Zheng
similarity 0.63
Abstract · Satellite images at multiple resolutions are available at: https://1drv.ms/u/c/758af5fc520c81c5/IQCjvHc3iiq6SJDpYipcIv5vAc-NmHMPCAwSTBnrA1vh…

We study absolute metric UAV localization within a provided geo-referenced satellite region, recovering continuous map position and viewing heading from a single oblique image or a short multi-view clip. Existing cross-view geo-localization methods retrieve the most similar satellite tile from a gallery and report Recall@K, but retrieval depends on gallery sampling, provides no heading estimate, and returns a tile index rather than a continuous coordinate. We propose SatFix, a feed-forward UAV--satellite localization framework built on VGGT-$Ω$. Satellite-grid features act as queries that aggregate UAV visual evidence, and two lightweight heads regress a 3-DoF pose in the satellite-map frame: continuous 2D position and heading. SatFix requires no explicit 3D map, rendered bird's-eye image, auxiliary sensor, or test-time pose alignment. A single model supports both single- and multi-view inputs, with trajectory constraints used during multi-view training. For metric evaluation, we introduce University-Metric, where satellite imagery is re-collected over a region up to 10.7$\times$ longer on a side (about 114$\times$ the ground area) than the original University-1652 tiles, with continuous position and heading labels for the original UAV tours. With one UAV view, SatFix localizes 52.08% of test frames within 50 m and 17.34% within 10 m, with median position and heading errors of 45.66 m and $20.81^\circ$, respectively. Inference takes under 0.1 s per single-view query on an NVIDIA RTX 4090. With nine UAV views, the median position error falls to 21.96 m and the median heading error to $8.73^\circ$. Compared with a fine-tuned VGGT-$Ω$ baseline, SatFix reduces median position error by 34.0% and nine-view median heading error from $25.43^\circ$ to $8.73^\circ$.

0.18

CJRR-Net: A Candidate-Joint Reprojection Ranking for Future-View Selection in Human Pose Estimation

cs.CV ·2026-11-10 ·Huiting Xi, Marsha Mariya Kappan, Eduardo Benitez Sandoval, Francisco Cruz
top venue similarity 0.63
Abstract · 10pages, 4 figures, 4 tables. Accepted for oral presentation at the Australasian Conference on Robotics and Automation (ACRA 2026)

Multi-camera systems support performance recording, sports and human-movement analysis, where selecting an informative viewpoint is important for reliable human pose estimation. We propose the Candidate-Joint Reprojection Ranking Network (CJRR-Net) for future-view selection among eight calibrated cameras in MPI-INF-3DHP. The model combines current-view pose observations, camera configuration, and candidate-specific geometric features obtained by reprojecting the estimated 3D pose and its uncertainty into each candidate view. CJRR-Net achieves a selected-view 2D mean per-joint position error (MPJPE) of 105.18 pixels, compared with 114.64 pixels for the shared-input MLP and 117.56 pixels for adapted PoseErrNet. It also achieves the lowest mean error among the listed policies in each evaluated occlusion group. A blender rollout illustrates repeated camera selection. These findings support candidate-specific geometry for single-view selection in the evaluated fixed eight-camera setting.

0.35

Pose-aware Legged Robot Semantic Exploration with Omnidirectional Perception in Confined Unknown Environments

cs.RO ·2026-09-16 ·Xiaoyang Zhan, Shiyu Chen, Kenji Shimada
similarity 0.63
Abstract · Submitted to ICRA 2027 under review

Semantic exploration in confined environments requires both environment mapping and detailed observation of target objects. For ground robots, limited sensor vertical fields of view and restricted standoff distances can leave upper object surfaces unobserved from planar viewpoints. Body tilting can improve coverage, but additional observations and posture transitions increase mission time. To address this trade-off, we present POSE, a pose-aware semantic exploration system that exploits a legged robot's intrinsic body pitch and roll with omnidirectional camera-LiDAR perception. The proposed pose-aware viewpoint sampling module selects body postures from partial object maps according to expected coverage gain, while aim-aligned execution reduces unnecessary body reorientation. Further, we introduce an object-centric viewpoint pruning strategy assisted by a vision-language model (VLM), which uses persistent observation history and bird's-eye-view (BEV) maps to reduce redundant inspection visits. The resulting semantic viewpoints are combined with geometric exploration viewpoints in a global exploration planner. Simulations show that POSE improves final target-surface coverage by 8-10 percentage points over the planar planning baseline while reducing exploration time by 17-32%, and achieves the highest mean object coverage AUC among the evaluated baselines. Real-world experiments with a legged robot carrying an omnidirectional camera-LiDAR suite in a machine shop further demonstrate the system's applicability. These results support adaptive body-posture planning for improving the coverage-efficiency trade-off in legged robot semantic exploration. We plan to release the code for community benefit in the future.

0.23