CS Paper Radar

DA-GRD: Decision-Aware Grasp-Relevant Disambiguation for tactile recovery under perception-to-execution mismatches

Haoran Wang, Yuteng Sun, Yuanjie Li, Ruofei Bai, Meng Yee, Chuah, Wenyu Liang, Jun Li, Wei-Yun Yau

cs.RO ·submitted 2026-09-24 05:53 UTC · v1

Abstract

Grasping is a fundamental robotic capability that bridges perception and physical task execution. This paper studies grasp pose recovery under a perception-to-execution mismatch, where a grasp generated from visual perception may become spatially stale if the object moves before execution, using only sparse tactile interactions and no further visual observations. We propose DA-GRD, Decision-Aware Grasp-Relevant Disambiguation, which maintains a weighted planar belief over possible object configurations and selects tactile probes according to their ability to eliminate hypotheses and improve agreement among candidate task grasps. Rather than fully relocalizing the object, DA-GRD stops when the remaining hypotheses support a common executable grasp. In MuJoCo experiments on ten rigid objects with translations up to 5~cm and yaw perturbations up to $\pm45^\circ$, DA-GRD achieves an 84.7% physical lift success rate, compared with 9.1% for stale AnyGrasp, 21.2% for the original fix-scan baseline, and 63.7% for fix-scan method adapted with an SE(2) belief. DA-GRD also achieves a 57.3% Task conditioned Success rate. Across objects, it uses a success-average of 4.13 tactile probes over the ten per-object means, corresponding to a 72.5% reduction relative to the fixed 15-probe baselines. Real-world experiments on six objects achieve 71.7% physical lift success and 38.3% task-conditioned success with 4.20 probes on average. These results show that tactile sensing can recover task-relevant grasps under vision-off conditions with limited physical interaction, without requiring complete object localization.

Comment
8 pages, 7 figures

Closest papers

Nearest neighbours by meaning across the whole index.

GLoTouch: Global-to-Local Haptic Perception Using a Parallel Gripper for Object Search, Recognition, and Grasping Without External Vision

cs.RO ·2026-09-23 ·Zonglin Li, Wanruo Zhang, Yiming Wang, Kun Song, Xinyi Zhou +1 more
similarity 0.71
Abstract

Perceiving objects in the environment is a fundamental capability of autonomous robots. In dark or low-light environments, external cameras often fail to reliably perceive object positions and geometry; when visual sensing is unavailable, completing target search, recognition, and grasping through touch alone becomes a key robot manipulation capability. This task must simultaneously address container-scale spatial exploration and object-scale fine-grained geometric perception, which is particularly challenging for low-degree-of-freedom parallel grippers. However, a unified framework remains lacking for connecting container-scale spatial exploration with object-scale fine-grained geometric perception and grasping. To address this challenge, we present \textbf{GLoTouch}, a global-to-local haptic perception and manipulation framework built on a parallel gripper. In the global stage, the gripper holds a passive long-reach probe, combining force measurements with known tool geometry to localize contacts and actively estimate candidate-object positions, coarse contours, and heights. In the local stage, the robot sets down the probe and uses the bilateral visuotactile sensors on the same gripper to directly acquire local haptic observations, which are matched against a given target 3-D model without object-specific training. We evaluate the framework in both simulation and real-robot experiments. Source code will be open-sourced.

0.30

TacBPM: A Tactile-conditioned Behavior Prior Model for Dexterous Reorientation

cs.RO ·2026-09-16 ·Jie Yin, Wanli Xing, Zeyuan Zhao, Xuezhou Zhu, Zhijie Deng +1 more
similarity 0.71
Abstract · Corresponding to: Jie Yin (jie.yin@sharpa.com)

Dexterous in-hand manipulation requires policies that coordinate high-DoF hand joints through intermittent, contact-rich interaction. Beyond target-orientation tracking, such policies must discover finger gaits that preserve object stability while adapting to geometry, anisotropy, pose, contact, and sensing changes. We propose \method, a tactile-conditioned behavior prior model for dexterous reorientation. \method distills multi-scale sphere specialists into a latent controller and lets downstream policies reuse the fixed tactile prior through residual latent actions, reducing renewed exploration from raw joint commands. The prior conditions on tactile-proprioceptive history so latent behavior reflects the current hand-object interaction. We evaluate arbitrary-pose transfer across anisotropic objects, commanded-axis rotation, and an arm-hand Grasp-to-AnyPose task in which the robot must grasp, lift, transport, and reach goal poses for novel tool geometries and generalized placements. Extensive experiments demonstrate that the proposed method accelerates training and enables stable policies where matched raw-action PPO remains near failure, with successful sim-to-real transfer in in-hand and arm-hand tasks.

0.20

Continual Learning for 6-DoF Grasp Synthesis via Experience and Demonstrations

cs.RO cs.LG ·2026-10-01 ·Giulio Schiavi, Andrei Cramariuc, Michael Pantic, Roland Siegwart
published similarity 0.69
Abstract · Accepted to CoRL 2026

Most current grasp synthesis systems are trained offline and remain fixed during deployment. While this works well when deployment conditions resemble the training data, performance can degrade when robots encounter conditions they have not seen before, such as unfamiliar objects. In this work, we present a continual-learning framework for single-view 6-DoF grasp synthesis for a parallel-jaw gripper in cluttered scenes. Rather than finetuning a large parametric model, our method adapts through memory in a learned embedding space: grasp outcomes update future grasp scores, while optional user demonstrations are recalled and transferred to new scenes as additional candidate grasps. We evaluate our method in simulation and in extensive real-world experiments comprising over 1500 grasp trials. We show that our method matches the performance of existing 6-DoF grasping baselines even before adaptation, improves online on unseen objects from categories absent or underrepresented during training, and supports long-horizon continual learning with limited forgetting. In real-world experiments, our method reaches over 90\% success rates on several challenging object categories after only 50 online grasp attempts. Videos and code at https://giuschio.github.io/cl_grasping/.

0.36

When Does Touch Matter? Charting the Vision-Interaction Gap in Cluttered Dexterous Grasping

cs.RO ·2026-09-21 ·Hao Jiang, Luis Dominguez, Daniel Seita
benchmark similarity 0.69
Abstract · 9 pages, 7 figures, 2 tables. Project website: https://interaction-dex-grasp.github.io/

Dexterous grasping in clutter poses a basic sensing question: when do tactile measurements and external wrench estimates improve on visual geometry? Occlusion and contact can obscure grasp quality, motivating a controlled evaluation of these interaction signals. We present a controlled real-world study over five tabletop scene conditions on a dexterous hand (LEAP Hand) with vision, per-finger and wrist wrench estimates, and distributed fingertip taxels. With demonstrations, visual observations, action space, and compliant control fixed, we compare diffusion policies trained by imitation learning on vision only, wrench, taxels, or all combined, plus representation and fusion baselines. The combined policy succeeds in 24/25 trials versus 14/25 for vision only, and 15/15 versus 6/15 across the three confined conditions. Ablations show that wrench and taxel feedback are complementary. Behavioral comparisons show that interaction feedback enables earlier rejection of inadequate contacts, regrasping before lift, and more stable grasps. To our knowledge, this is the first real-world study to combine and separately evaluate these interaction modalities for target-oriented dexterous grasping in clutter. These results chart a widening vision-interaction gap and position cluttered dexterous grasping as a benchmark for determining when the learned policy needs interaction sensing. Project website: https://interaction-dex-grasp.github.io/

0.32

GraspBench: Execution-Aware Cross-Robot Evaluation of 6-DoF Grasp Generation in MuJoCo

cs.RO cs.AI ·2026-11-05 ·Abdul Basit, Bibek Poudel, Muhammad Shafique
published similarity 0.68
Abstract · 7 pages, 6 figures, accepted for publication in ICARCV 2026

Modern 6-DoF grasp generators are often evaluated using grasp scores, dataset-level metrics, or single-robot demonstrations, yet proposal quality alone does not determine whether a grasp is executable by a particular robot. We present GraspBench, a controlled MuJoCo protocol for evaluating complete grasp-generation pipelines after robot-specific inverse-kinematics filtering, motion planning, and fixed approach-close-lift execution. GraspBench evaluates six configured pipelines across four robot embodiments, five diagnostic objects, and a structured tabletop pose grid, yielding 540 scenarios per method and 3,240 method-scenario evaluations in total. Missing outputs are conservatively counted as failures, and success follows the binary lift criterion produced by each method's execution runner. GraspGen achieves the highest overall success rate (73.1%), followed by EconomicGrasp (63.5%), while robot- and object-conditioned analyses reveal substantial variation across embodiments and object geometries. GPG produces the largest native candidate sets but achieves 44.3% success, indicating that proposal volume alone does not guarantee robot-executable grasps. Cluster-aware paired intervals support the principal method differences while not estimating repeated-execution uncertainty. The results characterize complete configured pipelines on fixed scenarios rather than intrinsic model quality or stochastic repeatability, showing that grasping performance depends jointly on the generator, robot embodiment, scene, and execution protocol.

0.33

GraspTwin: Zero-Shot Task-Oriented Grasp Optimization via a Digital Twin

cs.RO ·2026-09-24 ·Daniel J. Evans, Yinlong Dai, Simon Stepputtis, Dylan P. Losey
code/data similarity 0.68
Abstract

As robots transition from structured factory settings into homes, they are required to interact with an ever-increasing variety of objects. Many tasks require grasping, and often it is not sufficient to just pick up the target object. Consider a task like "pouring coffee" --- to facilitate the subsequent pouring, the robot should grasp the mug by its handle. Existing learning-based approaches for grasping either find robust and collision-free grasps that are largely agnostic to the task (e.g., picking up the mug by its rim), or leverage foundation models to propose task-appropriate grasp locations that lack fine-grained physical grounding (e.g., reaching for and missing the handle). In this work, we bridge these approaches with a real-to-sim-to-real framework. Based on a single RGB-D observation, we construct a digital twin of the environment, query a large foundation model to propose grasps that align with the object's affordances and task description, and then optimize the proposals to ensure robustness and plausibility before executing the result on the real robot. Our key insight is that the grasp proposals of the foundation model should be regarded as semantic priors that serve as seeds for local, gradient-free optimization. We leverage Bayesian optimization with Thompson sampling to draw batches of nearby poses, which are subsequently evaluated in parallel under domain-randomized physics rollouts. The resulting grasp is both task-oriented and physically feasible for execution by the robot arm. Our full zero-shot real-world transfer only takes a few minutes and improves task-oriented grasping success by up to 33% as compared to other state-of-the-art pipelines. Our code is available here: https://github.com/VT-Collab/GraspTwin/

0.34

ManiPhysicsBench: Physics-Based Assessment of Object Preservation in VLA Manipulation

cs.RO ·2026-10-02 ·Sangwu Park, Yeonjun In, Wonjoong Kim, Sungwon Kim, Sein Kim +1 more
similarity 0.68
Abstract · Preprint

Vision-language-action (VLA) models aim to perform diverse manipulation tasks, but task success in existing rigid-body benchmarks does not indicate whether they preserve objects. We introduce ManiPhysicsZoo, which consolidates literature-supported material properties, 3D meshes, and supporting references into reusable object assets. Using these assets, a solver-based assessment computes grasp-specific damage thresholds from object geometry, material properties, and recorded grasp conditions and compares them with recorded contact forces to assess potential deformation and fracture. Building on these components, ManiPhysicsBench evaluates object preservation in LIBERO and SimplerEnv across three physics axes and three difficulty levels. Public VLA checkpoints show a substantial gap between task success and safe success, defined as task completion while preserving the object. Their gripper commands concentrate near full opening and closure, with largely similar aggregate distributions across objects, consistent with binary gripper supervision. We examine how object-specific continuous gripper labels change model behavior by retraining a VLA model. The retrained model shows more object-dependent gripping and higher safe success, but lower task success and limited generalization of object-preserving behavior.

0.19

GOAG: Generative and Object-Agnostic Grasp Planner for Dexterous Robotic Manipulation

cs.RO cs.AI ·2026-08-20 ·Julien Merand, Boris Meden, Mathieu Grossard, Liming Chen
top venuecode/data similarity 0.68
Abstract · Project website: https://cea-list.github.io/goagweb/

Multifingered grasping is a crucial robotic skill, but current deep-learning grasp planners often struggle to generalize to new objects because they are trained on limited, object-specific datasets. We introduce a fundamentally different approach, grounded in the observation that the gripper and the object share identical surface geometry at their mutual contact points. We propose GOAG: Generative and Object-Agnostic Grasp Planner for Dexterous Robotic Manipulation, a novel deep generative model that learns a compact latent representation of a specific gripper's contact surface distribution, enabling the efficient sampling of valid grasp configurations without relying on object-specific training data. We show that by introducing object features only at inference time, our model can effectively retrieve admissible contact areas that are compatible with the gripper's capabilities. We validate our approach through extensive experiments on established grasp protocols in both simulated and real-world scenarios, demonstrating its effectiveness with different grippers from the literature. Our method delivers state-of-the-art results on the objects from the MultiDex dataset, achieving an average success rate of 86.93%. It offers significantly faster processing when generating numerous grasps, while matching the performance of leading approaches specifically trained on this dataset. Unlike these methods, our approach does not rely on object-specific training data, highlighting the advantages of object-agnostic learning. It effectively addresses the generalization challenges faced by traditional data-driven grasp planners. Code and videos are available on our project website https://cea-list.github.io/goagweb/ .

0.68