CS Paper Radar

AgriCountDINO: Parameter-Efficient Exemplar-Guided Counting and Localization in Agriculture

Shengjie Guo, Xin Li, Borjana Arsova, Hanno Scharr, Silvio Salvi

cs.CV cs.AI ·submitted 2026-09-24 12:13 UTC · v1
benchmark

Abstract

Accurate counting and localization of plants and their organs support phenotyping and yield estimation, yet target appearance, scale, and density vary widely across species and imaging conditions. Exemplar boxes specify the target without category-specific retraining, and point predictions identify the individual instances contributing to the count. We introduce AgriCountDINO, a parameter-efficient exemplar-guided framework for joint counting and localization. It conditions frozen multiscale DINOv3 features on exemplar appearance and size, then progressively decodes them into target points. Missed-object recovery extends supervision to targets overlooked by initial matching, and exemplar-adaptive point NMS filters duplicate predictions according to exemplar scale. With 8.4M trainable parameters, approximately one-tenth of TasselNetV4's, AgriCountDINO achieves a three-shot MAE of 11.92 on the TPC-268 benchmark, reducing counting error by 9.7\% while providing individual target locations. Trained only on TPC-268, it achieves a zero-shot MAE of 14.25 on unseen generic object categories in FSC-147, improving upon the best compared zero-shot method by 6.0\% without target-domain training or fine-tuning.

Closest papers

Nearest neighbours by meaning across the whole index.

Multibranch Ensemble Head in Vision Foundation Models for Efficient Cucumber Phenological Stage Classification

cs.CV ·2026-10-27 ·Kostiantyn Khabarlak
similarity 0.64
Abstract

Vision Foundation Models (VFMs) pretrained with self-supervised learning, such as DINOv2, provide highly transferable features, yet adapting them to small, domain-shifted datasets is still challenging. We propose a regularizing multibranch ensemble head: a training and inference scheme that pairs low- and high-capacity branches, samples a single branch stochastically at each training step, and averages both branches in probability space at inference. The design adds negligible parameters and essentially no inference overhead over a single heavy head, while improving the accuracy-efficiency trade-off under data-scarce conditions. Accurate classification of plant growth stages is critical for precision agriculture, enabling timely decisions on fertilization, irrigation, and harvesting. Therefore, as a challenging practical case we use cucumber phenological stage classification, in which flowers and fruits are frequently occluded by foliage, and stage transitions manifest primarily as subtle changes in leaf morphology. The NALEF Food Safety dataset contains images of five cucumber growth stages captured under diverse real-world conditions. On it we evaluate a broad range of backbones, including DINOv2 and DINOv3 ViT and ConvNeXt variants, against strongly supervised counterparts (ResNet, EfficientNet, ViT). The proposed DINOv2 ViT-S with multibranch head achieves a Macro F1 of 0.978 and Cohen's Kappa of 0.971, matching the performance of models more than ten times larger in parameters and GFlops, while requiring only 12.2 GFlops and 22.3M parameters, making it deployable on smartphones and edge devices for phenological stage classification.

0.28

Exemplar: Few-Shot Biomedical Segmentation That Fits in Seconds

cs.CV ·2026-09-02 ·Michal Průšek, Adam Novozámský, Filip Šroubek
code/dataunusual similarity 0.61
Abstract · 5 pages, 3 figures, 2 tables. Submitted to IEEE ISBI 2027. Code, configurations, and the score records behind every reported number: https:/…

Segmenting a new microscopy dataset usually means training a deep network on its annotations, and training again for every added image. Exemplar solves a segmentation readout in closed form and updates it exactly with each new mask in seconds, as accurately as networks trained for minutes. The updated readout is identical to a fit from all masks at once. Its linear readout combines frozen DINOv3 features, read at a magnification chosen from the masks, with classical filter responses at native resolution. Its regularisation and its pixel weighting are chosen exactly by leaving out one annotated image at a time, so none is set aside for validation. On ten biomedical datasets from cells to vessels and filaments, Exemplar is more accurate than every few-shot method that only applies a pretrained model, and on average than nnU-Net trained on the same masks. A fine-tuned Cellpose-SAM, the strongest baseline, is as accurate on average, but each of its fits takes a median of 25 minutes against 8.5 seconds, and each new mask means fine-tuning it again.

0.41

vividRGB: Various visual cue detection in RGB photographs with forced focused attention

cs.CV cs.AI ·2026-11-16 ·Masahiro Ryo
similarity 0.61
Abstract · 32 pages including supplementary material; 6 numbered figures and a graphical summary

Natural photographs contain dense, overlapping structures that can be weakly expressed in feature maps from whole-image vision encoders. We introduce forced focused attention (FFA) and its Python implementation, vividRGB. FFA is an encoder-agnostic inference-time procedure that applies a frozen encoder to enlarged, overlapping local crops, averages inverse-aligned reflections, and reconstructs a feature field in source coordinates. We evaluate 50 high-resolution photographs from grassland vegetation, fungal networks, airborne forests, coral reefs, and phytoplankton microscopy, using DINOv3 ViT-B/16. Across the five domains, FFA at 5% or 10% focus produces higher mean RGB-edge boundary F1 than direct DINOv3 encoding and automatic SAM3 masks. Domain means range from 0.244 to 0.596 for FFA, versus 0.028-0.076 for direct DINOv3 and 0.020-0.090 for SAM3. Qualitative feature maps also show finer appearance structure. These results concern RGB-edge preservation rather than verified species, traits, or biological segmentation. Narrower focus generally improves boundary preservation, while extraction time and GPU energy use increase sharply and gains diminish at finer settings. FFA may be useful for relatively small, high-resolution ecological image collections where dense visual cues matter. The alpha release vividRGB 0.1.0 and versioned research resources support reproducible cue inspection.

0.40

Vision-language models see more about agriculture than they report, and test-time scaling remains bounded by parametric knowledge

cs.CV ·2026-09-08 ·Earl Ranario, Jared Smith, Lars Lundqvist, Urmil Jatin Chandarana, Bharath Sridhar +1 more
benchmark similarity 0.61
Abstract · Submitted to HARVEST-Vision Workshop (WACV Workshops 2026)

Vision-language models (VLMs) show promise for agricultural diagnosis but fail unpredictably in zero-shot settings. We test whether this stems from poor visual features or an inability to verbalize what the model already perceives, using a benchmark spanning classification and detection drawn from 118 AgML classification and 54 detection datasets. Linear probing shows agricultural features are linearly separable in frozen VLM vision towers, with Gemma-4-31B's encoder reaching F1-macro of 0.60--0.78 across tasks and approaching the vision-only DINOv3 backbone, indicating the bottleneck lies downstream of perception. We then test whether test-time scaling, an iterative in-context skill-memory loop, can close this gap without updating weights. Gains are modest and inconsistent. Skill-memory improves classification accuracy by up to 3.1 points on three of four tasks while regressing on species, with gains concentrated on classes seen during optimization and unseen classes regressing. Detection F1 is effectively unchanged (0.412 to 0.421), though an oracle filtering condition reaches 0.432 F1, revealing real headroom unconstrained prompting fails to surface. These results indicate VLMs see more agricultural features than they report, but test-time scaling alone fails to surface that hidden parametric knowledge, motivating agentic approaches grounded in external, retrievable knowledge.

0.19

PlantC2USeg: Cross-Scale Consistent Pre-Training for Few-Shot Unified Plant Point Cloud Segmentation

cs.CV ·2026-09-02 ·Yu Tian, Xintong Jiang, Jan Franklin Adamowski, Shiv O. Prasher, Shangpeng Sun
similarity 0.60
Abstract · 27 pages, 20 figures

Modern crop breeding demands precise organ-level analysis for trait quantification, making plant point cloud segmentation (PPCS) increasingly important. However, conventional deep learning approaches rely heavily on densely annotated datasets that are labor-intensive to acquire. Unified PPCS adaptation from distribution-shifted examples with minimal additional training remains challenging. To address this, we propose PlantC2USeg, a deep transfer learning framework featuring cross-scale consistency learning to explicitly align features across spatial scales and an information-restricted decoding strategy that prevents reconstruction shortcuts and promotes robust adaptation. The resulting pre-training enables stable few-shot generalization across species and sensing conditions, while unified fine-tuning with inherited thresholds further reduces adaptation overhead. Under full supervision on Soybean3D, PlantC2USeg achieves the highest semantic IoU and instance mWCov among compared methods, at 91.91% and 94.62%. With 20 labeled samples, it leads both metrics at 89.78% and 90.27%; with only 10 samples, it retains the highest mWCov of 83.23% while achieving 83.19% IoU. Across HR3D, 10-shot transfer to tobacco, tomato, and sorghum averages 78.41% IoU and 79.42% mWCov, while 22-shot transfer to SYAU-Maize achieves the highest IoU and mRec at 92.75% and 93.51%. Furthermore, a leading category-averaged mIoU of 85.0% on ShapeNet Part demonstrates the framework's capability to handle diverse shape variations beyond agricultural domains. These results demonstrate that PlantC2USeg reduces overall adaptation effort under distribution shifts, enabling scalable plant phenotyping and transferable 3D representation learning beyond agriculture.

0.15

Geo-vision: Native-Resolution Geometry and Sampled Topology for Vehicle-Part Damage Classification

cs.CV cs.LG ·2026-10-11 ·Usef Faghihi, Amir Saki, Serge Jonathan Kogbeti-Wongo
code/data similarity 0.60
Abstract · 12 pages, 3 figures. Code: https://github.com/joseffaghihi/Geo-vision

Geo-vision classifies vehicle-part damage using a fixed representation combining appearance, multiscale geometry, orientation, and sampled digital topology. Connected components, holes, Euler characteristics, and spatial arrangement complement amplitude-sensitive pooling and a supervised tree classifier. We establish amplitude preservation, axial sign invariance, and conditional operator stability. Retrospective checkpoint evaluation on 55,303 crops from 4,916 source groups yields average precision 0.7577, exceeding 0.7458 for an ImageNet-pretrained frozen YOLO11n comparator on identical crops. The complete added structural block, comprising topology, occupancy, and component location, improves average precision by 0.00493 beyond appearance and geometry. Geo-vision uses no external encoder pretraining and has higher AP point estimates at every matched label budget. With approximately 25% fewer task labels, its AP point estimate exceeds full-data YOLO, although the adjusted interval includes zero. Complete serial CPU inference requires 26.98 ms per crop versus YOLO's 11.20 ms, with peak memory 185 versus 437 MiB. Independent external validation remains necessary.

0.33

EfficientVPR: Toward Efficient Visual Place Recognition via Scene-Aware Prompt Tuning and Adaptive Feature Enhancement

cs.CV ·2026-11-17 ·Wenjing Tang, Chuanguang Yang, Zhulin An, Libo Huang, Yongjun Xu
top venuecode/data similarity 0.60
Abstract · 18 pages, 11 figures, accepted at CVPR 2026

Visual place recognition (VPR) faces critical challenges in handling extreme environmental variations while meeting the computational constraints of practical applications. Current methods predominantly address these challenges by either scaling up model capacity or employing computationally intensive reranking stages, creating a significant efficiency bottleneck. To overcome this limitation, we propose EfficientVPR, a lightweight one-stage framework that achieves speed-accuracy trade-offs through two key innovations: i) a scene-aware visual prompt tuning method which adapts pretrained features with less parameters while dynamically adjusting to sample-specific characteristics, and ii) an instance-dependent key local feature enhancement module that further reinforces discriminative regions. Comprehensive evaluations on Pitts250k, MSLS, Eynsham, AmsterTime and SVOX demonstrate that our method establishes a new SOTA for DINOv2-small models by outperforming all same-scale competitors, and delivers a $73\times$ speedup with 60\% lower-dimensional features while maintaining competitive (within 2.5% average R@1 gap) against the SOTA DINOv2-large-based two-stage method. Our code will be available at https://github.com/WiniTang/EfficientVPR.

0.71

A100: A Hybrid Vision Foundation Model for Agricultural Plant Image Analysis

cs.CV ·2026-10-16 ·Mayur Pratim Das, Ajai Dubey, Aksshay Mathew P, Sana Afreen, Rishi Kumar Soni +3 more
benchmark similarity 0.60
Abstract · 11 pages, 5 figures, 5 tables

The use of accurate vision models for crop monitoring, disease diagnosis, and plant phenotyping in agriculture is hindered by the lack of expertly annotated data, especially in developing countries. We propose A100, an agricultural vision foundation model that is pre-trained using self-supervised learning on 3 million unlabeled images from fields covering more than 100 crop species. A100 uses a hybrid CNN-Transformer backbone that fuses MBConv stages for local feature extraction with Transformer stages for global contextual representation. A100 uses pre-training with the integration of DINO self-distillation, iBOT masked patch reconstruction, and KoLeo uniformity regularization, resulting in features that are better than ImageNet-12K supervised representations for agricultural applications without any fine-tuning. By utilizing a frozen backbone, the accuracy for crop classification of A100 is 95.37%, which is +2.56% better than ImageNet-12K, and reduces the leaf count error by 10.4% on the GroMo25 phenotyping benchmark, proving that the same backbone can be used for classification and regression tasks. After full fine-tuning, the performance of A100 is 99.90% on 32-class crop identification and 99.02% on 44-class disease detection. On the difficult PlantDoc dataset, A100 outperforms all baselines, such as CvT-13 (64.89% against 63.56%). Remarkably, A100 obtains 98.01% accuracy on plant classification using just 1% of the labelled data (about 284 images per category), showing great label efficiency for use cases with limited labeling. Under an identical protocol, A100 also outperforms the publicly released agricultural foundation models FoMo4Wheat and LeafVision by more than 14 points at 1% labels. We plan to publicly release our pretrained model to allow agricultural professionals to adapt A100 for various plant analysis applications using limited annotations.

0.14