CS Paper Radar

Body-Grounded Replanning for Physically Adaptive Manipulation

Namiko Saito, Hiroshi Kera

cs.RO ·submitted 2026-09-24 16:00 UTC · v1

Abstract

Manipulation requires not only reasoning about the external environment, but also about the robot's physical condition. A strategy may remain geometrically feasible while becoming physically unsuitable due to increased joint load or limited mobility, yet internal physical state is typically used only for low-level control. We propose body-grounded high-level replanning, which uses internal physical state to adapt manipulation strategies during execution. Body-state events trigger strategy replanning, and an LLM interprets the underlying joint-level state, recent execution statistics, and execution history to select a context-dependent alternative, while leaving the task objective and low-level controller unchanged. We evaluate the framework on a reaching task under controlled load and asymmetric mobility constraints in simulation and on a real robot. Our experiments show that body-grounded replanning maintains high task success while reducing physical effort and enabling more efficient strategy adaptation. Additional contact-rich manipulation experiments demonstrate the applicability of the same replanning interface beyond reaching. These results show that internal physical state can inform not only low-level control, but also high-level decisions about how a manipulation task should be performed.

Closest papers

Nearest neighbours by meaning across the whole index.

HiFun: a Hierarchical Framework for Efficient Functional Dexterous Manipulation Learning

cs.RO ·2026-10-14 ·Linyi Huang, Guowei Huai, Weibin Liu, Shulong Jiang, Ping Tan +3 more
code/data similarity 0.72
Abstract

While multi-fingered dexterous robot hands have the potential to provide human-level dexterity, using them for functional manipulation remains difficult because task success depends on precise contact, coordinated arm-hand motion, and reactive recovery from execution errors. Precise contact depends on complex contact dynamics that are difficult to model accurately in simulation, motivating real-world learning. However, real-world demonstrations in the full arm-hand control space are costly and noisy because each trajectory must coordinate arm motion with high-DoF multi-finger contact. Small execution deviations can further cause slipped contact or premature force application, making recovery from off-nominal contact states important for robust execution. To deal with these challenges, we propose HiFun, a hierarchical real-world RL framework for functional dexterous manipulation tasks. Our key insight is to decouple the control complexity into a functional hand skill for precise contact execution and an arm-hand coordination policy for arm control and hand-skill activation. This design enables effective real-time human intervention for reactive recovery learning and efficient data collection with Dynamic Movement Primitive (DMP) augmentation. Across six real-world tasks on two dexterous hands, HiFun achieves 98.3% average success within one hour of online training and remains robust to dynamic disturbances. The project page is available at https://hly-123.github.io/HiFun/.

0.23

RoboPace: Contact-Aware Time-Optimal Retiming for Action-Chunk Policies

cs.RO ·2026-10-07 ·Mimo Shirasaka, Takehiko Ohkawa, Takuya Okubo, Nicola Scianca, Tatsuya Matsushima +1 more
similarity 0.71
Abstract · Project: https://robopace.airoa.io/

Robot manipulation data collection has been shifting from teleoperation toward robot-free demonstrations, through interfaces such as the Universal Manipulation Interface (UMI) or directly from human hands. Vision-Language-Action (VLA) policies trained on such data inherit the demonstrator's timing. Yet human timing does not directly transfer to robots: compliant hands tolerate fast contact, whereas robots may overshoot due to actuator and tracking limitations; conversely, robots can move faster in free space. This motivates a unified approach that reconciles execution speed with contact safety. We present RoboPace, an online retiming layer that preserves the policy's geometric path while adapting its timing, respecting the target robot's kinematic and dynamic constraints. It adapts execution speed based on predicted contact, jointly accounting for contact-dependent speed limits and the robot's motion constraints. The method requires no policy retraining and operates in real time. Across three contact-rich tasks on a dual-arm robot, faster uniform execution and physical-limit-only retiming largely fail. RoboPace instead achieves higher overall success than slow uniform execution while completing four of five commands in approximately half the time, retaining the reliability of slow execution without its time cost.

0.51

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.71
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.71
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.39

GOTT: Object-centric Dexterous Manipulation with a Reusable Cross-Embodiment Primitive

cs.RO cs.AIcs.CV ·2026-10-02 ·Yulin Liu, Lai Wei, Yen-Jen Wang, Akash Sharma, Pieter Abbeel +2 more
code/data similarity 0.70
Abstract · Project page: https://dex-gott.github.io/

Foundation models and large-scale human data provide rich sources of manipulation intent, but translating this intent into multi-fingered robot behavior remains difficult. Dexterous hands still lack a reusable low-level primitive that reliably establishes contact across tasks and embodiments. We propose GOTT, a reach-acquire-move framework built around a single cross-embodiment contact-acquisition primitive. Given a robot-agnostic object trajectory and a reach specification, GOTT first brings the hand near a task-relevant contact region. The shared closed-loop primitive then establishes stable contact from this approximate initialization, and a pose-conditioned controller tracks the desired object motion. Reach specifications may come from future-aware planning, external models, or human demonstrations, while the primitive and tracking backend remain unchanged. Simulation and real-world experiments show that GOTT is able to establish robust contact across diverse objects, arm-hand platforms, and seen and unseen hand morphologies. It also consistently improves end-to-end task success over open-loop grasp execution.

0.45

Contact-Guided Exploration for Non-Prehensile Locomanipulation with Multi-Critic RL

cs.RO ·2026-08-28 ·Simone Tolomei, Mayank Mittal, Franco Angelini, Manolo Garabini, Paolo Salaris +1 more
top venue similarity 0.70
Abstract · project website: https://tolomeis.github.io/contact-guided-exp Accepted in IEEE Robotics and Automation Letter (RA-L) 8 pages, 9 figures

Non-prehensile manipulation offers versatile skills for moving and rearranging heavy or bulky objects, particularly when combined with a mobile manipulation platform. However, both model-based and model-free approaches struggle with the complex hybrid dynamics and the sparsity of the contact in these tasks. To address these challenges, we propose a contact-guided exploration strategy implemented within a Multi-Critic Reinforcement Learning (RL) framework. A dedicated exploration critic is trained with a dense contact-seeking reward that guides the end-effector toward meaningful contact points; its influence is progressively decayed to recover a task-optimal policy. We obtain candidate interaction points from a general-purpose grasping algorithm, enabling the exploration mechanism to generalise across various object geometries. We evaluate the approach on multiple tasks, including box pushing, chair transportation, and a dishwasher opening task. Finally, we validate the chair transportation policy through extensive experiments on a quadrupedal mobile manipulator, demonstrating deployable non-prehensile manipulation in the real world.

0.37

Systematically Exploring the Capabilities of GPT-6 Astra as Embodied Policies

cs.RO ·2026-09-29 ·Galbot Team, Xuchuan Chen, Xiaoqian Cheng, Yu Deng, Lihe Ding +29 more
highly cited similarity 0.70
Abstract

GPT-6 Astra exhibits a remarkable ability to generate numerical robot actions, extending its role beyond high-level planning. To assess Astra's capabilities as general-purpose embodied policies, we conduct comprehensive evaluations across six domains, examining direct control, cooperation with learned policies, and feedback-driven adaptation. In gripper manipulation, Astra can correct task targets and prepare contact conditions for subsequent policy execution; hybrid control with π0.5 achieves 48% success on the evaluated RoboDojo subset. In dexterous manipulation, hybrid control achieves 50% success in ten experience-guided DexJoCo trials, while direct in-hand control struggles to coordinate finger contacts. In mobile manipulation, hybrid control reaches 38.7% success on the evaluated RoboCasa365. In navigation, Astra leads our local comparisons, reaching 92% success on RxR instruction following and 82% on HM3D object search, although search incurs substantial detours. In locomotion, dense motion-reference generation remains unreliable: none of five sequential attempts on a single obstacle course reaches the goal, despite improvements in stability and forward progress. In humanoid loco-manipulation, Astra exceeds baseline methods on 13 of 30 HumanoidBench tasks with pretrained whole-body controllers. These findings reveal a gap between useful task decisions and reliable physical control. Inference latency further constrains practical control: across 50 RoboDojo instances per condition, policy-assisted and direct control consume 624.8 million and 1.132 billion tokens. A 30-second locomotion run requires 250 model calls averaging 39.86 seconds each, with physics paused during inference.

0.44

Scaling Latent Motor Adaptation to Coordinated Bimanual Manipulation

cs.RO ·2026-10-10 ·Seung-Bin Joo, Alessandro Albini, Luca Wiehe, Perla Maiolino, Daniel Olmeda Reino +1 more
published similarity 0.70
Abstract · Accepted at the IROS 2026 Bimanual Manipulation Workshop. 5 pages, 4 figures

Robust manipulation under uncertain object dynamics and geometry remains a core challenge in real-world robotics. Policies trained under fixed assumptions often degrade when object mass, friction, scale, or shape vary. Embedding-based adaptation methods such as Rapid Motor Adaptation (RMA) address this by conditioning actions on latent representations of environment dynamics inferred from interaction history. We investigate whether this paradigm scales from single arm settings to coordinated bimanual manipulation, where higher dimensional control, coupled contacts, and shared object forces introduce additional complexity. We evaluate bimanual RMA on three contact-rich ManiSkill tasks with randomized YCB object properties. Bimanual RMA, using observation-action history and dual wrist depth images, retains privileged policy performance on bimanual picking and lifting, while an otherwise matched stationary PPO policy without latent conditioning achieves low success; all methods remain limited on long-horizon stacking. We further demonstrate direct sim-to-real transfer on a dual Franka lifting task without real-world finetuning. Together, these results suggest that latent conditioning provides useful structure for scaling robust control to coordinated bimanual systems, while longer horizon tasks require additional temporal structure.

0.29