CS Paper Radar

Managing Iterative Hybrid Quantum-Classical Optimization as a First-Class Scientific Workflow

Giuliana Siddi Moreau, Maria Laura Clemente, Lorenzo Pisani, Manuela Profir, Marco Pinna, Marco Moro, Lidia Leoni

cs.DC ·submitted 2026-09-24 20:36 UTC · v1

Abstract

Today's Quantum Processing Units (QPUs) are too small and too noisy to solve large combinatorial optimization problems directly, so practical hybrid solvers split a problem into pieces and iterate a decompose-solve-aggregate loop over whatever backends are available: classical heuristics, simulators, emulators, or a QPU. In practice, the loop is a driver script. It sits on top of the quantum-HPC middleware, handling task generation, provenance, recovery, and portability. Instead, we treat the loop as a scientific workflow and ask what a workflow layer adds to a generic workflow management system and QPU-sharing middleware. Two decomposition patterns from real applications, iterative consensus (ADMM) and hierarchical partitioning, turn out to stress the orchestration layer very differently: over 120 managed runs, orchestration took 78.4% of end-to-end time for the iterative pattern, almost all of it in a per-round barrier, but only 6.2% for the hierarchical one. Our workflow model adds four things a generic engine does not have: a termination predicate residing in the task graph that reads the previous round's residuals, subproblem-level recovery with warm-start and quorum-deferred aggregation, failover from a QPU to a classical replica within a round, and a provenance schema that describes CPUs, simulators and QPUs with the same fields, including the shot budget included. We report the cost of each layer on our engine, show that speculative re-execution enable runs to complete under injected failures that stall an unmanaged driver. We also use the same provenance to give per-device latency tails across simulators, emulators and IQM QPUs.

Closest papers

Nearest neighbours by meaning across the whole index.

A Domain-Specific Language for Formulating Hybrid Quantum-Classical Meta-Solver Strategies

cs.SE quant-ph ·2026-08-10 ·Nick Poser, Domenik Eichhorn, Ina Schaefer
code/data similarity 0.74
Abstract · 13 pages, 3 figures, preprint of a paper that was accepted at the GI Quantum Computing Workshop 2026

A key challenge when designing hybrid quantum-classical workflows is the identification of quantum candidates, that is, determining for which specific problems quantum advantages could potentially be achieved. When choosing between several candidates, it is crucial to consider the characteristics specific to the problem, as these can fundamentally determine how successful quantum or classical approaches will be. This implies that specialized expertise is needed to use hybrid quantum-classical workflows successfully. To address this challenge, we propose a domain-specific language (DSL) to express best-practices in solution strategies using a universal representation that is easy to use and share. This DSL provides a flexible approach to design hybrid quantum-classical workflows and to automate decisions for a wide range of problems, supporting decisions down to problem-specific details while remaining technically independent. Furthermore, we propose a framework that is built around our DSL that enables the execution of defined workflows using the ProvideQ toolbox as an orchestration layer. All contributions from this publication are open source.

0.28

Towards Continuous Profiling and Optimization of Quantum-Classical Pipelines

cs.ET quant-phcs.OS ·2026-09-05 ·Ayush Bansal, Owen Cochell, Santiago Núñez-Corrales, Marcos Frenkel, Seetharami Seelam +2 more
similarity 0.70
Abstract

Quantum applications increasingly execute as multi-stage quantum-classical pipelines, interleaving QPU computation with classical stages like circuit generation, transpilation, layout mapping, quantum error mitigation (QEM), and post-processing. These stages have diverse resource requirements and exhibit stochastic behavior under drifting hardware noises, yet existing workflow frameworks treat them as static, isolated components. We present LLQM (Low-Level Quantum Machine), a profiling-driven meta-framework for quantum-classical pipelines. LLQM decomposes pipelines into fine-grained tasks and continuously profiles their CPU/GPU, memory, QPU, and queue dependencies alongside real-time hardware states. This unified runtime abstraction captures cross-stage resource dependencies and reveals how classical and quantum decisions interact, enabling characterization of their impact on fidelity and resource consumption. We evaluate LLQM using QEM as a representative pipeline stage, on IBM 156-qubit Heron r2 processors with circuits up to 100 qubits and 1e7 transpiled gates. Our results show that continuous profiling exposes runtime bottlenecks and enables hardware-, fidelity-, and workload-aware optimizations.

0.17

Enabling Hybrid HPCQC Workflows with a Heterogeneous Software Stack

cs.DC quant-phcs.SE ·2026-08-14 ·Muhammad Nufail Farooqi, Minh Chung, Burak Mete, Eric Mansfield, Bernd Hoffmann +3 more
publishedcode/data similarity 0.69
Abstract · Presented at the Cray User Group conference (CUG26). Conditionally accepted for the ACM International Conference Proceedings Series (ICPS)

In this work, we demonstrate hybrid High Performance Computing-Quantum Computing (HPCQC) workflows on a production petascale system. The demonstration combines three components: the SuperMUC-NG supercomputer at the Leibniz Supercomputing Centre (LRZ), a 20-qubit superconducting quantum processor provided by IQM Quantum Computers (IQM), and Munich Quantum Valley (MQV)'s Munich Quantum Software Stack (MQSS). Integrating quantum processors into High Performance Computing (HPC) systems requires a heterogeneous software stack capable of orchestrating classical and quantum resources within established supercomputing workflows. MQSS treats Quantum Processing Units (QPUs) as scheduler-managed accelerators and it performs resource coordination following a two-level scheduling scheme. Slurm performs system-level allocation by exposing QPUs as Generic RESources (GRES), while the MQSS Quantum Resource Manager & Compiler Infrastructure (QRM&CI) performs just-in-time compilation and subsequent dispatch of quantum circuits. To integrate with existing HPC operations without modifying the scheduler core, MQSS introduces an open-source SLURM Plugin Suite based on Prolog/Epilog scripts and SPANK modules. Experimental results show that hybrid HPCQC workflows can be executed without significant latency overhead compared to conventional workloads. The presented architecture provides a portable integration model for quantum accelerators on large-scale HPC systems and is directly applicable to next-generation Hewlett Packard Enterprise (HPE) Cray platforms, including LRZ's upcoming 'Blue Lion' supercomputer.

0.35

Resource-Aware Scheduling for Distributed Quantum Computing

cs.NI ·2026-10-21 ·Connor Howe, Raghav Mundada, Jake O'Shaughnessy, Ibrahim Abdullahi, Ali Anwar
similarity 0.69
Abstract

Distributed quantum computing (DQC) is a promising near-term approach for executing circuits that exceed the capacity of a single quantum processing unit (QPU). Prior work has made significant progress on circuit partitioning and reconstruction, but practical DQC requires more than cutting a circuit into smaller pieces. A runtime system must determine whether to execute the circuit intact, cut it for sequential execution on one QPU, or distribute it across multiple QPUs, while accounting for queueing, communication, reconstruction, and hardware constraints. We present a resource-aware scheduler for DQC that compares these execution alternatives at runtime using explicit models of QPU execution, communication, and host-side reconstruction, together with hardware-informed timing derived from simulated IBM QPUs. By treating communication and reconstruction as first-class scheduling costs, the scheduler selects execution plans using a more realistic view of end-to-end overhead than cutting-only approaches. Across our experiments, reconstruction accounts for over 83% of cutting overhead, distributed execution reduces P90 latency by up to 39% relative to uncut single-QPU execution, and scheduling overhead itself remains negligible, never exceeding 0.038% of end-to-end job latency. Together, these results show that DQC must be treated as a runtime scheduling problem over both quantum and classical resources, not just circuit partitioning.

0.15

Qubrio: High-Performance Quantum Compilation via Multi-Agent LLM Collaboration

cs.AI quant-ph ·2026-11-01 ·Jixuan Ruan, Zhuo Cui, Zhengding Hu, Zhongkai Yu, Xiang Fang +8 more
code/data similarity 0.67
Abstract

Large Language Models (LLMs) offer an adaptable alternative to traditional quantum compilation heuristics, which bottleneck progress by demanding costly manual redesigns whenever hardware evolves. However, naive single-pass LLM approaches fail under the unique challenges introduced by quantum compilation. We introduce Qubrio, a practical agentic framework that significantly reduces heuristic redesigns through a three-level decomposition. By (1) partitioning programs into sequential operation stages, (2) deploying specialized agents for placement, routing and optimization, and (3) using disaggregated feedback for precise error correction, our system reliably navigates complex physical constraints. Beyond serving as a direct compiler, our LLM framework also uncovers novel strategies that facilitate convoy-style shuttling, substantially enhancing hardware concurrency without sacrificing fidelity. We further integrate these strategies into the previous state-of-the-art (SOTA) compiler, recovering a significant fraction of the LLM's performance advantages. On realistic workloads, our compiler achieves significant improvements in hardware runtime and program fidelity over the SOTA baseline PowerMove, seamlessly adapting to new hardware capabilities. Qubrio features an open user interface for practical use, and its code is publicly available at https://github.com/crosaa/Qubrio.

0.29

NxM-Version Programming for Quantum Software: High-Level Components across Frameworks and Engines

cs.SE quant-ph ·2026-09-27 ·Neilson Carlos Leite Ramalho, Higor Amario de Souza, Anthony Accioly, Valter Vieira de Camargo, Marcos Lordello Chaim
similarity 0.67
Abstract

Quantum computing has in recent years evolved from a purely theoretical field to an active area in both academia and industry. As a result, Quantum Software Engineering has emerged as an area that aims to organize the process of building, testing, and running quantum software. However, writing quantum software still requires programming with quantum gates and qubits, as well as knowledge specific to quantum software frameworks such as Qiskit, Cirq, Qrisp, pyQuil and PennyLane, each of which reaches quantum hardware through its own toolchain. We present Quanifi, which packages the high-level routines of these frameworks as components on the Apache NiFi dataflow canvas. The components exchange circuits as OpenQASM 2.0, so a circuit built by one framework can be executed by another. This allows for two types of redundancy: several frameworks implement the same algorithm, and several engines (simulators or real hardware) execute the same circuit. We describe N$\times$M program execution, which crosses the two: a single NiFi flow runs each of the $N$ implementations on each of the $M$ engines, and because every result is labelled with its implementation and its engine, a disagreement can be linked to an implementation, to an engine, or to a single implementation-engine pair. We ran Grover's algorithm built by three frameworks on three quantum computers from IBM, IQM and Quantum Inspire, and a matrix of three adder builders on one IQM device reached through two routes. N$\times$M execution helped us discover three real defects: an incorrect gate-set declaration in the Quantum Inspire adapter, execution consistent with negated $R_x$ angles on Tuna-17, and circuit modification through Open Quantum. The latter two returned wrong answers without reporting an error. We reported all three defects and Open Quantum's provider confirmed and fixed its QASM parsing defect.

0.14

Hybrid Classical-Quantum Solutions to Accelerate the Adoption of Quantum Computing

cs.ET cs.DCcs.PLcs.SE ·2026-10-05 ·Advait Deshpande, Luciano Baresi, Arosha K. Bandara
similarity 0.66
Abstract

Despite the promise and potential of quantum computing, most of the current day developments of quantum computing have several limitations for relevant practical use. As a result, hybrid classical-quantum computing has emerged as a viable solution. This paper discusses the software aspects of hybrid classical-quantum computing solutions to understand and examine how hybrid computing solutions can be expected to work in practice. This paper examines existing software solutions (cloud applications, middleware frameworks, and API gateways) that can enable classical and quantum computing to work together. For practitioners the paper provides a curated list of algorithms, full stack libraries, simulators, and cloud service providers that are likely to be central to the development of any hybrid computing solutions. We conclude by identifying an agenda for future research on classical-quantum hybrid software engineering, and some near-term priorities for development of functional, robust hybrid software systems. The paper argues that due to the deep dependency of quantum execution on classical pre- and post-processing, hybrid computing may represent a near-permanent outcome of classical-quantum computing rather than a transitional workaround.

0.06

Quantum-HPC Workflows Across Multiple Quantum Computing Platforms: Two Case Studies

cs.DC quant-ph ·2026-09-25 ·Philipp Seitz, Miwako Tsuji, John Children, Yuta Kikuchi, Riku Masui +3 more
published similarity 0.65
Abstract · 10 pages, 7 figures, 6 tables, accepted at SFWM SC26

We describe the Quantum-HPC hybrid system comprising the supercomputer Fugaku, the QPUs Quantinuum Reimei and ibm_kobe, and the Tierkreis hybrid workflow software. We present two demonstrations of the system at work. In the first, we compute the excited states of a biomolecular system using Fugaku and Reimei (simulator) to handle classical and quantum parts of the workflow respectively. In the second, Fugaku coordinates Reimei and ibm_kobe working together in a combined VQE + QPE workflow to compute the ground state energy of a simple system.

0.39