CS Paper Radar

dRVG: Quadtree-Guided, Resolution-Complete Online Motion Planning for Polygonal Robots in Unknown Environments

Duo Zhang, Hechen Zhang, Junshan Huang, Jingjin Yu

cs.RO ·submitted 2026-09-25 15:34 UTC · v1

Abstract

We present the dynamic rotation-stacked visibility graph (dRVG), an online motion planner that guides polygonal robots to specified goals in initially unknown, static environ- ments. It merges local roadmaps from successive observations to plan collision-free translations and rotations without a uniform position grid. A spatial quadtree schedules sensing goals across regions to reduce repeated visits while retaining all orientation configurations for routing. Under exact sensing and geometric computation and star-shaped robot and envelope assumptions, dRVG with center scans is resolution-complete relative to full- map RVG at the same angular resolution. In experiments using footprint scans, dRVG solves all 140 cases across 20 difficult maps and seven angular resolutions within a 20 s planning budget, with a median planning time of 1.18 s at 360 orientation layers. Six microMVP demonstrations illustrate the complete online planning loop on a physical robot.

Closest papers

Nearest neighbours by meaning across the whole index.

Tiered-Resolution Volumetric Mapping for Real-Time Simultaneous Planning and Mapping on Natural Outdoor Environments

cs.RO ·2026-10-14 ·Afonso E. Carvalho, David Portugal, Paulo Peixoto, George Kantor
published similarity 0.72
Abstract · 5 pages, 5 figures, 2 tables, IROS 2026 "Data in Field Robotics: From State Estimation to Navigation" workshop

Real-time volumetric mapping for a planning robot is dominated by the cost of integrating and storing information at the finest resolution, yet only a small fraction of any map ever lies on or near a path the planner actually considers. We exploit this with a tiered-resolution mapping mechanism that integrates LiDAR into a single map structure at two resolutions simultaneously: fine inside a corridor around the robot's current plan, and coarse everywhere else. As opposed to traditional navigation pipelines where path planning uses the mapping result and provides no feedback, we propose a feedback loop where planning also informs mapping to dynamically integrate information at different leaf resolutions. Across two real-world teleoperated datasets, replayed and scored offline against an independent full-resolution map, the tiered maps are 13-15x smaller and require 6-8x less integration CPU time than a uniform fine map, while producing paths at a similar cost per meter as the ones generated from fine resolution maps on both scenarios. A uniform coarse map reaches the same size savings but its path quality collapses (+210% cost per meter) on the harder scenario, because it over-discretizes terrain the robot must traverse. Tiering approximates the coarse map's cheapness without its failure mode.

0.21

PoliMop: Policy-in-the-Loop Motion Planning in 3D Spaces for Mobile Robots

cs.RO ·2026-11-13 ·Yael Fassbind, Valentin N. Hartmann, Huang Su, Yijiang Huang, Stelian Coros
similarity 0.69
Abstract · 8 pages, 5 figures. Videos and code: https://ariael21.github.io/polimop.html

Reaching a goal state in a complex environment often requires a robot to overcome challenging terrain and obstacles. Which routes are accessible depends on the robot's physical design, the control policy it uses, and how it modifies its surroundings. We present a kinodynamic rapidly-exploring random tree (RRT) planner that uses physics simulation to exploit skills encoded in the control policy, which allows it to find a path in the scene with respect to the robot's capabilities. The planner samples states from a reduced state space in 3D around the scene and expands the RRT toward each sample using policy rollouts. We guide sampling with a preplanned path for a simple mass-point model to focus exploration on promising regions leading toward the goal state, reducing planning time by up to 63%. Simulation experiments with quadrupeds, humanoids, and wheeled robots demonstrate that our approach supports drop-in integration of various robots and control policies, exploiting their physical and policy capabilities without modifying the underlying planning algorithm. Predefined environmental modifications, such as placing a plank across a gap to build a bridge, will automatically be picked up by the planner as the robot's reachable space expands.

0.19

2DGS-Planner: Rasterization-based Path Planning in 2D Gaussian Splatting Map

cs.RO ·2026-10-08 ·Jiwon Park, Dong-Uk Seo, Hyun Myung
code/data similarity 0.66
Abstract

Gaussian splatting provides an explicit and efficiently rasterizable scene representation for robot navigation. However, individual Gaussian primitives may not reliably represent obstacles as they are jointly optimized through alpha-composited rendering from a finite set of reconstruction views. We propose 2DGS-Planner, a path planner for ground robots that reads planning-relevant geometry from a 2D Gaussian splatting (2DGS) map through rasterization, rather than treating individual Gaussian primitives as obstacles. During offline roadmap construction, multi-view attribution converts rendered normal dispersion into structural scores for non-ground disks supported by the reconstruction views. These scores guide adaptive node sampling on the ground. Path-aligned orthographic queries validate candidate edges, while cylindrical queries estimate local clearance fields that are cached on the edges. During online planning, graph search initializes a route, and path refinement reuses the cached fields while accounting for the robot's dimensions and ground constraints. Experiments demonstrate improved roadmap connectivity, more accurate clearance estimation, and higher planning success compared with the tested baselines. These results support rasterization as an effective geometric query interface for planning directly on Gaussian maps. Code and data are available at https://2dgs-planner.github.io/

0.28

CMP-IRRT*: A Perception-Assisted Height-Adaptive Planner for Quadruped Robots

cs.RO ·2026-10-07 ·Mingfan Zhao, Wendong Mao, Zhongfeng Wang
publishedcode/data similarity 0.66
Abstract · Accepted at the 18th Asian Conference on Machine Learning (ACML 2026)

Quadruped robots can traverse low obstacles, but many 2D planning pipelines still model obstacles as binary occupied regions and rely on sampling-based search that can be inefficient under a limited budget. We propose a perception-assisted height-adaptive planning framework based on CMP-IRRT*, a Channel Mamba PointNet-guided Informed RRT* planner. Given a calibrated top-view RGB observation, the perception module estimates obstacle regions and converts depth predictions into a ground-relative height map. The planner then performs height-conditioned collision checking, treating high obstacles as blocked while allowing low obstacles to be traversed, and uses the CMP guide to bias sampling toward promising regions while retaining standard free-space and informed sampling fallbacks. Experiments on 2D planning benchmarks show that CMP-IRRT* reduces explored nodes and iterations compared with classical and neural-guided baselines, and a controlled ablation supports the contribution of the Mamba-based guide. In constructed traversability-aware scenarios, the proposed planner reduces path length by up to 16.3% when low obstacles are traversable, and a Unitree Go2 demonstration further shows executable bypassing and traversal behaviors. Our code is publicly available at https://github.com/MingfanZhao/height-adaptive-planner.

0.40

MR. POP: Multi-Robot Parallel Optimizing Planner for Almost-Surely Asymptotically Optimal Planning

cs.RO ·2026-09-25 ·Chih H. Huang, Roy Xing, Brian Plancher, Zachary Kingston
similarity 0.65
Abstract

Finding globally optimal paths remains a fundamental challenge in multi-robot motion planning. Despite acceleration of almost-surely asymptotically optimal (a.s.a.o.) planners via CPU-based parallelism, achieving both probabilistic convergence guarantees and strong computational performance, these algorithms still struggle to scale to multi-robot settings. As such, we introduce MR. POP, a GPU-based a.s.a.o. multi-robot planner based on dRRT and the AO-x meta-algorithm. MR. POP uses large-scale GPU-based SIMT-parallelism to simultaneously run hundreds of roadmap construction and tree search iterations with underlying parallel nearest neighbor search and collision checking operations. We show that this enables MR. POP to become the only planner achieving a 100% solve rate while being faster than state-of-the-art a.s.a.o. planners in multi-robot systems up to 35-DOF. MR. POP also raises the success rate of downstream motion optimizers (e.g., from 4% to 72%), by creating high-quality, diverse seeds that help avoid local minima.

0.20

GPU-accelerated Incremental Euclidean Distance Transform for Online Motion Planning of Mobile Robots

cs.RO ·2026-10-30 ·Yizhou Chen, Shupeng Lai, Jinqiang Cui, Biao Wang, Ben M. Chen
top venuecode/datahighly cited similarity 0.65
Abstract · Published in RA-L 2022. Author-accepted manuscript. Code: https://github.com/JINXER000/GIE-mapping

In this letter, we present a volumetric mapping system that effectively calculates Occupancy Grid Maps (OGMs) and Euclidean Distance Transforms (EDTs) with parallel computing. Unlike these mappers for high-precision structural reconstruction, our system incrementally constructs global EDT and outputs high-frequency local distance information for online robot motion planning. The proposed system constructs OGM with massive amount of data from multiple types of sensor inputs. Using GPU programming techniques, the system quickly computes EDT in parallel within local volume. The new observation is continuously integrated into the global EDT using the parallel wavefront algorithm while preserving the historical observations. Experiments with datasets have shown that our proposed approach outperforms existing state-of-the-art robot mapping systems and is particularly suitable for mapping unexplored areas. In its actual implementations on aerial and ground vehicles, the proposed system achieves real-time performance with limited onboard computational resources.

0.87

STAG: A Sparse Traversability-Aware Graph Representation from Grid-Based Costmaps for Robotic Navigation

cs.RO ·2026-10-08 ·Gabriel Manuel Garcia, Stéphanie Aravecchia, Miguel Angel Olivares-Mendez
benchmark similarity 0.64
Abstract

Autonomous rovers navigating large unstructured environments need efficient global planning that accounts for terrain traversability. However, searching dense grid-based costmaps becomes computationally expensive as the mapped area grows. We introduce STAG, a Sparse Traversability-Aware Graph that converts costmaps into compact graphs. STAG combines a medial-axis topological backbone, representative nodes for homogeneous traversability regions, and transition nodes near strong traversability gradients. Edges encode geometry and traversability to account for path length and terrain difficulty. We compare A* on STAG and dense grids using synthetic cave maps, mine maps and the DARPA CERBERUS dataset. Across five benchmark categories comprising 203 map instances and 101,200 queries, STAG reduces median planning time by 3.4x to 9.9x and peak query memory by 2.1x to 15.4x, with median relative path-length differences of -2.9% and +7.6%. STAG offers a compact representation for global planning, trading dense-grid traversability optimality for faster, less memory-intensive search.

0.15

Global Path Planner with Multi-Model Switching

cs.RO cs.SEeess.SY ·2026-09-11 ·Pietro Gori, Francesco Iotti, Eduard Zelenay, Rastislav Marko, Michele Pierallini +3 more
hot direction similarity 0.64
Abstract

This work enhances global path planning via a pure-pursuit controller with multi-model kinematic switching that sustains plan fidelity across diverse terrains. The system includes a traversability graph for terrain analysis, a Heading-Aware A* algorithm for generating feasible paths, and a multi-model Pure Pursuit controller for dynamic tracking. A core innovation is adaptive kinematic modeling, enabling real-time switching between kinematic models based on terrain features and robot states. This adaptability optimizes path efficiency and energy use in challenging scenarios. We validate the approach in simulation on different platforms, namely the Artaban quadruped and the X3 quadrotor drone, showcasing improved performance, robustness, and adaptability over standard baselines.

0.26