CS Paper Radar

OC-GS: Gaussian Splatting for Irregular Turntable Capture

Jae Joong Lee, Bedrich Benes

cs.CV cs.AI ·submitted 2026-09-25 17:35 UTC · v1

Abstract

Uneven rotation and dropped frames make equal-angle assumptions unreliable for turntable reconstruction. We present OC-GS, an object-centric Gaussian splatting that refines each image's angle while maintaining a shared camera, rotation axis, and pivot. This orbit-consistent refinement jointly optimizes image-derived geometry and angles to reconstruct objects from sparse, irregular captures. On rendered objects with 12, 8, and 6 irregularly spaced views, OC-GS achieves mean foreground PSNR scores of 21.26, 19.36, and 15.83dB, respectively, exceeding all four evaluated pose-free Gaussian splatting baselines in each condition. Under a shared trainer, refining image-estimated angles improves mean foreground PSNR by 7.88dB over keeping those estimates fixed. An ablation study shows that both image-derived angle initialization and the shared motion model contribute to the improvement. On real captures, OC-GS's refinement increases mean foreground PSNR by 0.70dB. Results show that refining uncertain angles within a shared motion model improves reconstruction from sparse, irregular turntable captures.

Closest papers

Nearest neighbours by meaning across the whole index.

Frame-Consistent Feed-Forward 3D Gaussian Splatting from Sparse Unposed Images

cs.CV ·2026-10-16 ·Viruthshaan Vinasirajan, Ranga Rodrigo
similarity 0.71
Abstract

Feed-forward Gaussian models have made novel view synthesis almost instantaneous. Feed-forward methods predict Gaussians directly, either in two stages or in a single merged pass. Using two separately trained models is attractive because each can specialize in its own objective: one for accurate pose estimation and the other for high-quality reconstruction, rather than forcing a single jointly trained network to compromise between the two. A natural instantiation pairs a frozen pose estimator, VGGT, with a frozen reconstruction backbone, TokenGS. Prior work, such as VGGT-X and 3R-GS, also adopts a two-stage design, but attributes the resulting quality degradation to noisy pose estimates and introduces learned refinement. We show that this is not the primary source of the problem. Through per-camera analysis across 107 scenes from two datasets, DL3DV and MipNeRF360, using COLMAP poses as the reference, we find that the rotation error after alignment is small (median 1.6 degrees), whereas the translation scale is offset by a large, dataset-consistent factor. Controlled ablations over 140 DL3DV scenes show that the primary obstacles are two integration failures rather than pose error: a coordinate-frame inconsistency and a translation-scale mismatch, both of which can be corrected deterministically. With these fixes, a frozen VGGT driving a frozen TokenGS achieves 22.47 PSNR, within 0.51 dB of the COLMAP reference, with no additional training, when poses are estimated from all scene views. In the sparse setting, where reconstruction uses only four context images under the standard pose-free protocol, the same pipeline matches this all-view quality, yielding a fully COLMAP-free pipeline without any refinement step.

0.11

Sparse-View 4D Gaussian Splatting via Spatiotemporal Priors and Generative Assistance

cs.CV ·2026-10-03 ·Shengqi Wang, Zhengxian Yang, Kaiwen Tian, Yang Liu, Bowen Liu +4 more
top venuebenchmark similarity 0.69
Abstract · 4 pages, 5 figures, Accepted to SIGGRAPH Asia 2026 Workshops (SA Workshops '26)

We present a 4D Gaussian Splatting framework for the Sparse-View Track of the SIGGRAPH Asia 2026 Volumetric Video Challenge, which requires dynamic scene reconstruction from only six cameras with wide baselines. To achieve robust dynamic reconstruction under such sparse views, our framework integrates three components. (1) Region-adaptive spatial priors: We use foreground masks to guide Gaussian initialization and mask voting to control densification separately for the dynamic foreground and static background. Background geometry is regularized using monocular depth aligned to metric scale. (2) Motion-consistent temporal priors: We provide supervision at intermediate times through frame interpolation and constrain projected Gaussian motion with estimated optical flow. (3) Generative assistance: We place virtual cameras in the widest angular gaps and restore their rendered images using a diffusion-based model conditioned on camera poses. The restored images are iteratively incorporated into training as pseudo-supervision. On the validation set, our framework improves full-frame PSNR from 25.60 dB for the baseline to 29.75 dB. On the official test benchmark, it achieves 30.04 dB full-frame PSNR and 27.88 dB foreground PSNR, ranking first overall in the Sparse-View Track.

0.35

RoMo-GS: Efficient Online 3D Gaussian Splatting for Robot Mapping via Exposure-Integrated Motion Blur

cs.RO ·2026-10-17 ·Sangwoo Jung, Di Deng, Jiahui Fu, Laura Herlant, Ayoung Kim +1 more
similarity 0.69
Abstract

Online 3D Gaussian Splatting (3DGS) is emerging as a practical way to build a representation for robotics applications. However, deploying it on real-world platforms exposes multiple challenges. Rapid maneuvers of a robot induce motion-blurred images, which corrupt the reconstructed geometry and cause camera pose drift. Furthermore, the number of Gaussians grows without bound during continuous online mapping. In this study, we present RoMo-GS, an online 3DGS system designed to address these challenges. Instead of averaging N discrete sub-frames as in prior motion blur-aware 3DGS, we analytically integrate each projected Gaussian over the exposure interval, yielding an O(1) complexity per Gaussian. Building on this, we bound the Gaussians' growth with a Hessian-based pruning score, while jointly refining pose, velocity, and Gaussians with Adam and an online LM step over the Gaussians. On multiple public datasets and a self-collected dataset, RoMo-GS matches or exceeds offline deblurring 3DGS methods in rendering quality while running 15--150x faster, and operates online at competitive quality with about 20% fewer Gaussians than the online 3DGS baseline.

0.09

M$^3$ISR: A Multi-Modal Multi-View Benchmark for 3D/4D Gaussian Splatting and Feedforward Compression

cs.CV ·2026-08-23 ·Xinhui Liu, Lei Liu, Zhenghao Chen, Lebin Zhou, Wei Wang +1 more
benchmark similarity 0.67
Abstract

High-fidelity free-viewpoint video (FVV) and interactive rendering increasingly rely on explicit Gaussian representations, yet practical deployment remains constrained by representation size, dynamic updates, and computational cost. Existing multi-view video benchmarks provide valuable real-captured content, but they make it difficult to isolate the effects of controlled camera geometry, representation efficiency, and temporal redundancy. We introduce M$^3$ISR, a controlled synthetic benchmark for 3D and 4D Gaussian Splatting (3DGS/4DGS). The benchmark contains 25 scenes from five indoor and outdoor scene groups, two camera/motion configurations, six synchronized 1080p views, and dense ground-truth annotations including RGB, camera parameters, depth, semantic and instance segmentation, and static--dynamic masks. The shared-center camera design intentionally isolates angular view variation and enables controlled evaluation of novel-view synthesis and representation efficiency. We organize M$^3$ISR into five complementary tracks covering 3DGS synthesis, 4DGS synthesis, 4DGS streaming, 3DGS compression, and 4DGS compression. Representative baseline results show small differences in static reconstruction quality but substantial differences in representation storage, while the evaluated streaming methods exhibit substantially higher reported training or reconstruction cost than the corresponding offline dynamic reconstruction baselines. We further define feedforward compression tasks for 3DGS and 4DGS and provide reference rate--distortion formulations and preliminary baseline evaluations. The benchmark is intended as a controlled and complementary testbed for systematic study of Gaussian-based FVV reconstruction, compression, and streaming.

0.28

DeltaSplat: Iterative Gaussian Refinement for Pose-Free Feed-Forward 3D Gaussian Splatting

cs.CV ·2026-10-07 ·Chanung Park, Seunghyeon Song, Joo Chan Lee, Eunbyung Park, Jong Hwan Ko
similarity 0.67
Abstract · 11 pages, 6 figures

Pose-free feed-forward 3D Gaussian Splatting (3DGS) reconstructs a scene from sparse, unposed images in a single network pass, removing the need for camera calibration and per-scene optimization. However, camera estimation errors propagate into the predicted Gaussians and compound the geometric and photometric inaccuracies of single-pass prediction. To correct these errors, we introduce DeltaSplat, a lightweight Gaussian refinement module for pose-free feed-forward 3DGS. It iteratively renders the current Gaussians at the input context views and predicts per-Gaussian updates from the resulting residuals. A 2D residual alone, however, underdetermines the 3D correction. DeltaSplat therefore conditions each update on per-pixel Plücker rays and rendered depth as a soft geometric prior. A dual-branch convolutional mixer efficiently encodes these inputs, and per-attribute heads decode the fused features into position, opacity, and color updates. The module adds only ~2.2% parameters to the backbone and remains fully feed-forward at inference. On DL3DV, DeltaSplat reaches 26.64 dB PSNR in the pose-free setting, improving its state-of-the-art backbone by 1.75 dB and surpassing even baselines supplied with ground-truth cameras; consistent gains hold across 6-24 views and all camera regimes.

0.20

NOVA-GS: Noise-Aware View-Consistent Gaussian Splatting for Low-Light Novel View Synthesis

cs.CV ·2026-09-11 ·Shaurya Pavan A, Vemunuri Divya Madhuri, Yash Pradeep Gawande, Kaushik Mitra
published similarity 0.67
Abstract · Accepted to the 3D4S Workshop at CVPR 2026; selected for the Best Paper Award

Reconstructing 3D scenes under real-world low-light conditions remains challenging due to severe sensor noise, low signal-to-noise ratios, and degraded photometric consistency, which destabilize geometry estimation and novel view synthesis. Existing approaches often rely on well-lit reference data for reliable Structure-from-Motion (SfM) initialization under degraded inputs or apply per-view enhancement methods that introduce cross-view inconsistencies. To address these limitations, we propose \textbf{NOVA-GS}, a unified noise-aware framework for low-light 3D Gaussian Splatting that subsumes enhancement, denoising, and geometry optimization within a single process. Our method leverages VGGT-based feed-forward estimation to obtain robust camera poses and geometry directly from degraded inputs, eliminating the need for SfM. Building on this initialization, NOVA-GS integrates three coupled components: a structure-aware enhancement module for exposure correction, a self-supervised denoising module with blind-spot masking for pseudo-supervision, and a consistency-driven Gaussian Splatting optimization enforcing cross-view geometric coherence. We further introduce a noise-guided spherical harmonic regularization to suppress view-dependent artifacts in noisy regions. Extensive experiments on diverse real-world low-light datasets demonstrate improved geometric fidelity, color consistency, and robustness without requiring paired supervision or well-lit references. https://shaurya2524.github.io/nova-gs/

0.51

Gauss What You Need: Compact Gaussian Splatting Across Scene Scales

cs.CV ·2026-09-25 ·Afif Boudaoud, Jiayi Liu, Alexandru Calotoiu, Torsten Hoefler
benchmark similarity 0.67
Abstract

3D Gaussian Splatting reconstructs a scene as a collection of Gaussian primitives from a set of posed photographs called the capture. The number of primitives used to represent the scene affects reconstruction quality, storage, and rendering cost. How to select this number automatically across capture scales remains unresolved: configurations effective on standard benchmarks can leave larger captures with too few Gaussians to reconstruct fine details. We observe that the surface to represent, given by the capture's extent and resolution, is known before training, whereas its content complexity becomes apparent during training, through the reconstruction quality on the training views. We introduce TangoGS, which combines capture-derived model sizing with training-based adaptation: the capture determines the scale of the model, and training feedback determines its final size within that scale. Before training, TangoGS derives a learning allowance for model growth from the capture's total pixels after discounting views that re-observe the same scene points. During training, reconstruction quality guides how many Gaussians to add and remove. On 13 standard benchmark scenes, TangoGS matches the mean PSNR of the best-performing evaluated baseline, LeGS, with $48\%$ fewer Gaussians. On eight large captures, the same configuration automatically scales to larger models when necessary, achieving the highest mean PSNR among evaluated methods: $0.54$ dB above the runner-up with $2.3\times$ as many Gaussians. Together, capture-derived learning allowances and training-quality guided density control enable a state-of-the-art quality--size compromise across scene scales without retuning.

0.10

LiTe-GS: Oracle-Efficient Next Best View Selection for 3D Gaussian Splatting

cs.CV cs.RO ·2026-09-24 ·Vivek Pandey, Amirhossein Mollaei Khass, Nader Motee
similarity 0.66
Abstract

Selecting informative camera views is critical for efficient training and adaptive refinement in 3D Gaussian Splatting, where each observation significantly influences model parameters. However, information-driven view-selection strategies can require repeated evaluations of expensive information-gain oracles as the number of candidate views increases. We propose LiTe-GS, an oracle-efficient method for next best view selection in 3D Gaussian Splatting. LiTe-GS reduces the number of information-oracle evaluations by performing randomized subset evaluation of candidate views rather than exhaustively scoring the full candidate pool. The resulting approach achieves expected $O(M\log(1/ε))$ oracle complexity with respect to the number of candidate views $M$, independent of the selection cardinality $K$, while providing an explicit trade-off between oracle efficiency and approximation quality through $ε$. We provide theoretical guarantees on oracle complexity and approximation performance under the proposed selection scheme. Experiments on Blender and Mip-NeRF 360 demonstrate that LiTe-GS maintains reconstruction quality comparable to Fisher-information-based baselines while substantially reducing the number of Fisher-oracle evaluations across different acquisition settings.

0.11