CS Paper Radar

HapticWorld: an Interactive World Simulator with Real-time Torque Feedback

Shaoting Peng, Litian Liang, Yixuan Wang, Ming Yang, Katherine Driggs-Campbell, Mark Cutkosky, James Jingxi Xu

cs.RO ·submitted 2026-09-25 19:17 UTC · v1
theory

Abstract

Contact-rich manipulation depends on force sensing that is hard to infer from visual signals alone, both for collecting demonstrations and for training policies. Force-annotated data, however, remains hard to obtain at scale: real-robot collection ties every demonstration to physical hardware, physics simulators report contact forces that deviate systematically from real measurements, and learned world simulators, though scalable and realistic, are vision-only, so operators feel nothing during data collection and the data carries no force/torque (F/T) labels. We present HapticWorld, an interactive world simulator that predicts joint torque together with observations and renders it back to the operator in real time, closing the haptic loop between a human and a learned world model. Across three contact-rich tasks, torque feedback raises data collection throughput by 1.6 times on average. Policies trained on HapticWorld-generated demonstrations succeed in 54/60 real-world trials, approaching the 56/60 upper bound of real-world data, and far exceeding the 19/60 success rate of the vision-only baseline. Moreover, the success rates measured inside HapticWorld closely match real-world evaluation, demonstrating that HapticWorld can serve as a stand-alone F/T-conditioned policy evaluation platform.

Comment
Project webpage: https://haptic-world.github.io/

Closest papers

Nearest neighbours by meaning across the whole index.

ACTS: Learning Visuo-Tactile World Models from Human Physical Interaction

cs.RO ·2026-10-16 ·Yuxiang Ma, Weihan Xu, Pengfei Ye, Anna Mei, Yuxin Ray Song +3 more
similarity 0.76
Abstract · Project website: https://acts-anon.github.io/

Abstract Action-conditioned world models for contact-rich manipulation require data that captures how contact forms, slides, and releases under varying force. Such data are slow to collect through robot teleoperation, which often lacks force feedback and is constrained by gripper geometry. We ask whether these dynamics can instead be learned from human physical interaction and transferred to a robot. We present ACTS, a visuo-tactile world model trained only on human interaction data. Operators manipulate handheld GelSight sensors while we record third-person and wrist video, tactile images, 6-DoF sensor motion, and tactile-derived normal force, yielding React, a 4.9-hour bimanual dataset across three objects. We represent actions at the tactile sensor as motion augmented by force change, providing a shared action space for human collection and robot execution. ACTS jointly predicts future scene, wrist, and tactile observations. On held-out human data, ACTS improves scene-view prediction by 0.7-2.0 dB PSNR over the stronger of two visuo-tactile world models trained from scratch on React. Without fine-tuning, in the robot teleoperation rollouts we inspected, predicted tactile imprints still appear and disappear with recorded contact. Visual transfer is less robust: camera predictions exceed frame copying on PushT, are mixed on Rope, and fall below it on Motherboard, while wrist views can blur or hallucinate structure. These results suggest that contact dynamics transfer more reliably than visual appearance from human to robot.

0.22

PhyVisGen: Physically and Visually High-Fidelity Robotic Manipulation Data Generation

cs.RO ·2026-09-22 ·Yu Zheng, Qiyu Feng, Yixin Wu, Baoquan Yang, Yixuan Zhou +4 more
similarity 0.76
Abstract · 8 pages, 5 figures. Under review

Large-scale manipulation demonstrations are essential for learning robust visuomotor policies, yet real-world data collection is expensive and difficult to scale. Simulation offers a promising alternative, but physical and visual discrepancies can limit the transferability of synthetic data, particularly for manipulation with soft grippers. We present PhyVisGen, a physically and visually high-fidelity framework for scalable robotic manipulation data generation. On the physical side, PhyVisGen introduces an arm-gripper coupling method based on the Incremental Potential Contact (IPC), enabling high-fidelity soft contact throughout complete manipulation trajectories. On the visual side, it combines real-scene reconstruction with real-time path tracing to generate visually realistic observations while preserving captured scene appearance. Quantitative evaluations demonstrate the physical and visual fidelity of PhyVisGen. Policies trained exclusively on synthetic manipulation demonstrations achieve 65-95% success across five real-robot tasks, without real-robot demonstration data or policy fine-tuning.

0.25

PredTac: Learning Contact-Rich Manipulation with Predicted Touch

cs.RO ·2026-09-14 ·Weijia Fan, Daqiang Guo
similarity 0.75
Abstract · 8 pages, 4 figures

Contact-rich manipulation benefits from tactile feedback, yet physical tactile sensors introduce hardware, calibration, synchronization, and maintenance costs that complicate policy learning and deployment. We formulate predicted touch as an alternative to measured tactile input and present PredTac, a framework that learns to infer tactile states from causal visual observations and robot states and uses the predicted touch as an explicit interface for policy learning and execution. A tactile predictor is first trained with tactile supervision and then used to provide contact information without requiring measured tactile input during downstream policy training or execution. We evaluate PredTac across three contact-rich manipulation tasks in simulation and on a real robot, and further examine how policy performance depends on the predicted contact content. In simulation goal-offset evaluations, predicted-touch policies achieve 27.0%, 52.0%, and 44.7% success on USB, Barbed-spike, and Valve, respectively, improving over the visual baseline by 8.0-13.7 percentage points. On the real robot, predicted-touch ACT achieves 70.0%, 50.0%, and 90.0% success on USB insertion, Barbed extraction, and Valve rotation, respectively, with a three-task mean of 70.0%, approaching measured-touch ACT at 72.2% and substantially outperforming visual ACT at 21.1%. Fixed-policy interventions further show that performance is sensitive to the spatial structure of predicted contact, with spatial rearrangement at fixed value distributions reducing Valve success by 10.7 percentage points. These results demonstrate that predicted touch can provide useful contact information for contact-rich manipulation without requiring tactile sensing as a policy input.

0.25

Language-Grounded Force/Torque Pretraining for Extrinsic Contact Perception

cs.RO ·2026-10-29 ·Kazuki Takahashi, Hiroaki Murakami, Ryota Sakuma, Mitsuhiro Kamezaki, Matthew Ishige +1 more
similarity 0.75
Abstract · 9 pages, 5 figures

Fine manipulation requires robots to recognize when a grasped object makes or changes contact with its environment, yet such extrinsic contact is not always directly observable from vision or local contact geometry. Force and torque signals carry this information, but also vary with object weight, grasp configuration, and robot motion, leaving it unclear whether they can provide a reusable representation of physical state. Here we show that bilateral six-axis force/torque histories can be pretrained as a semantically structured physical representation by aligning them with a frozen language space using supervision generated from simulated pick-and-place interactions. On unseen objects in simulation, the learned representation supports text-prototype readout of robot action, object weight, and grasp interaction. In real-world placement, unlabeled calibration enables contact and support-state recognition without updating the encoder, outperforming a vertical-force sign-reversal rule baseline. For connector insertion, an event absent from pretraining, low-rank adaptation improves data-efficient learning over training from scratch. These results show that force/torque histories can support both direct readout of known physical states and efficient adaptation to new extrinsic-contact events.

0.16

WorldContact: A Contact-Centric World Model for Scalable Robot Learning

cs.RO ·2026-09-17 ·Caoliwen Wang, Mengdi Wang, Heng Zhang, Shixun Huang, Siyuan Chen +5 more
similarity 0.75
Abstract

Adapting robots to new objects and tasks requires interaction experience that can be costly to obtain. We present WorldContact, a contact-centric world model for deformable-object manipulation, constructed from a limited set of high-quality trajectories to generate additional training data efficiently. It predicts object dynamics using larger time steps than the source numerical simulator, which requires small integration steps to resolve rapid motion and prevent interpenetration. We evaluate WorldContact across 16 shopping-bag manipulation tasks. State-rollout measurements on a single H100 GPU show a $10\times$ speedup over the source simulator, excluding rendering and disk I/O. We use the generated data to fine-tune an existing vision-language-action policy and deploy it directly on a real robot. In bag lifting, the same policy achieves 65% single-attempt success when fine-tuned on source simulation data alone, compared with 95% when fine-tuned on the dataset expanded with WorldContact. These results support efficient data generation with WorldContact for robot policy adaptation.

0.22

Dex-X: Learning Visual-Tactile Dexterous Manipulation From Human Videos with Simulated Interaction

cs.RO ·2026-09-07 ·Ruoqu Chen, Feixiang Ruan, Liu Cao, Zihao Wang, Botian Xu +7 more
highly cited similarity 0.75
Abstract · Project website: https://dexx-code.github.io/dexx-code/

Human videos are an abundant source of dexterous manipulation behaviors, but they lack tactile information that is crucial for contact-rich interaction. This raises a fundamental question: can robots learn deployable visual-tactile dexterous manipulation policies from human video demonstrations without robot-side data collection? We present DEX-X, a framework for learning visual-tactile dexterous manipulation from human videos through simulation. Our key insight is that simulation can serve as a tactile completion engine. Given monocular human demonstrations, DEX-X reconstructs hand-object interactions in simulation, where physically grounded contact dynamics provide tactile supervision unavailable in the original videos. Leveraging this recovered tactile information, we train visual-tactile dexterous manipulation policies and distill them into deployable policies operating on point-cloud observations and tactile sensing. We demonstrate zero-shot sim-to-real transfer on a dexterous hand-arm platform across diverse grasping and contact-rich tool-use tasks. The teacher policy achieves 65.9% average success across six task categories in simulation, while the distilled visual-tactile policy achieves 93% success on real-world cube picking and 53% on the challenging table-cleaning task. Zero-shot generalization to unseen object geometries is also observed on object-picking tasks. Our results suggest that simulated interaction is a key bridge between human videos and deployable dexterous manipulation policies, providing the missing physical supervision needed for scalable robot skill learning from Internet-scale human video data.

0.50

RUMI: A Robotiq-Matched Universal Manipulation Interface for Robot Learning with Augmented Reality and Haptic Feedback

cs.RO cs.AI ·2026-11-11 ·Kevin Avdiu, Seongjin Bien, Yannik Blei, Philine Meister, Johannes Hechtl +4 more
similarity 0.75
Abstract

Many manipulation tasks require carefully controlled contact forces for successful execution, yet large-scale, force-aware datasets remain scarce. Handheld interfaces can help by transmitting interaction forces directly through the operator's arm, but most existing designs are tailored to simple linear grippers and do not match the nonlinear mechanics of widely used robotic grippers. We present RUMI, a handheld universal manipulation interface matched to the Robotiq 2F-85 with exchangeable fingertip sensors that preserves the target gripper geometry while enabling natural input before contact and force measurement after contact. By integrating the tracking system into a virtual reality headset, our method provides real-time augmented reality feedback about the kinematic feasibility of motion on the target robot platform. We further introduce a haptic feedback mechanism that supports force-aware teleoperation for simulated and real robots. A user study shows fewer episodes containing joint-limit violations with live robot visualization and pose initialization (3/50) than without augmented reality (16/50). We additionally train imitation policies from demonstrations, collected using two different fingertip modalities enabled by the gripper-matched hardware, and assess the haptic interface's capability for collecting force-aware teleoperation datasets in simulation.

0.04

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

cs.RO ·2026-10-27 ·Cunxi Dai, Botao He, Francois R Hogan, Wei Pan, Rao Fu +5 more
similarity 0.75
Abstract · Project webpage: https://card-retargeting.github.io/

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

0.39