CS Paper Radar

Goal-Persistent Coding Agents as Scientific Performance Engineers: A Fixed-Radius Nearest-Neighbor Case Study

Xiangyang Ju

cs.AI cs.PFcs.SE ·submitted 2026-09-25 20:32 UTC · v1

Abstract

Coding agents can pursue persistent objectives across many tool-use turns, but evidence that general-purpose agents can conduct rigorous scientific performance engineering remains limited. We present a repository-scale case study in which off-the-shelf Codex and Claude Code agents optimize fixed-radius nearest-neighbor (FRNN) search for particle tracking. Starting from a PyTorch-dependent CUDA implementation, the agents follow an executable goal that specifies exact-correctness tests, profiling requirements, and acceptance criteria without prescribing code transformations. In the primary sequential trajectory, they autonomously remove the PyTorch dependency and conduct hypothesis-driven optimization experiments. The resulting standalone C++/CUDA library exactly reproduces the targeted reference result. Its synchronous NumPy interface achieved 1.6-fold speedup over the original GPU-resident PyTorch interface, despite including host transfers. Similar speedups were observed across different GPU architectures and software stacks. An independent optimization rerun followed a different sequence of hypotheses and reached even better performance on the target workload. These results show that goal-persistent coding agents can act as experimental performance engineers, and that executable scientific contracts are needed both to guide and to validate their optimization.

Comment
10 pages, 2 figures

Closest papers

Nearest neighbours by meaning across the whole index.

GPUPhysBench: Benchmarking Coding Agents for Correct and Efficient GPU Physics Simulation

cs.DC cs.AI ·2026-09-28 ·Yuchen Sun, Jinjin He, Sinan Wang, Bo Zhu
benchmark similarity 0.66
Abstract · 41 pages

Writing fast GPU code for physical simulation is difficult: implementations must preserve numerical accuracy while handling irregular data access, synchronization, and iterative solvers. We introduce GPUPhysBench, a benchmark of 50 tasks testing whether coding agents can meet these demands. Tasks cover fluids, deformable solids, and granular materials, from individual simulation operators to complete simulators. Agents write, compile, test, and optimize GPU code with access to a NVIDIA GPU under fixed time budgets. We report pass rates and runtime performance relative to expert-optimized reference implementations. In a single-attempt evaluation of six frontier model-harness pairs, the two strongest pass all 50 tasks, but even the fastest reaches at least 0.9 the reference speed on only 22% of them, and no submission is more than 5% faster than the reference. The largest gaps arise in collision detection, constraint solving, and iterative solvers. GPUPhysBench brings physical simulation workloads to coding-agent evaluation, testing both the ability to implement numerical methods correctly and the ability to make them run efficiently.

0.23

A Case Study of a Multi-Agent Kernel-Optimization Loop That Learns a New AI Accelerator

cs.LG cs.AIcs.ARcs.PL ·2026-10-28 ·Byonggon Chun
publishedbenchmarkcode/data similarity 0.65
Abstract · 7 pages, 3 figures, 2 tables. Round 1 of the NPU Model Optimization Competition at MICRO 2026. Code: https://github.com/bgchun-fs/multi-agen…

Frontier large language models write correct CUDA kernels for most single-operator benchmark tasks, yet their accuracy collapses on accelerators whose architecture and programming language they have rarely seen. We present a case study of an LLM agent loop built for such accelerators. Our example is the FuriosaAI RNGD NPU, programmed in a recent, sparsely documented Rust DSL, where the loop optimized three Gemma-4-12B decode kernels over 12 days on a shared, scarce device. The loop builds its own target knowledge: it writes and checks a summary of the DSL documentation, measures the chip with microbenchmarks, records compiler-derived legality rules, and revisits this knowledge when the toolchain changes, rechecking rules and measurements where it can. A role-based search over per-kernel Design Trees explores whole-kernel designs and accumulates small accepted changes in the best version of each kernel. Because device time is scarce and readings are noisy, cheap checks screen new designs before any device run, and late in the run a change was accepted only after repeated comparisons with the best kernel on the device. The final kernels reach a 9.293x geomean speedup over the official baseline, each within 1.25x of the cycles needed just to move its weights. Our prompts, profiler and acceptance test are available at https://github.com/bgchun-fs/multi-agent-kernel-gen-loop.

0.40

Accelerate Bench: Evaluating Agents for Application-Level Program Optimization

cs.AI ·2026-11-16 ·Bowen Liu, Yuhan Li, Nuo Chen, Weile Luo, Miao Peng +5 more
benchmarkcode/data similarity 0.64
Abstract · 49 pages, 8 figures. Work by Bowen Liu was done during an internship at Tencent Hy Team. Yuhan Li is Project Lead; Nuo Chen is corresponding…

Application optimization requires coding agents to discover useful changes and coordinate them across a complete program while preserving the required computation. We introduce Accelerate Bench, a benchmark of 32 CPU optimization tasks adapted from scientific applications and supercomputing competitions. Each task provides a working program and specifies the workload, correctness requirements, timing boundaries, and permitted edits, leaving agents to choose where and how to optimize. Public testing supports iterative development, and a separate verifier scores the final submission. On benchmark version 1.1, we evaluate 16 coding agents, each pairing a model with a harness. Their Score@1 ranges from 25.5% to 67.4%. Most of their programs are correct, and the size of the speedup separates them: the two leading agents are at least 2x faster on 22 or more of the 32 tasks, while the other fourteen reach 2x on 8 to 17 and leave 125 of their 412 correct outcomes below 1.25x. Controlled replays show why coordination across an application matters: identical source code runs between 0.29x and 2.12x depending only on build and runtime settings, and one code change is worth 1.01x or 6.4x depending on another. Accelerate Bench pairs executable workloads with agents' programs and trajectories to evaluate both their gains and the process behind them.

0.61

From GPU to TPU with Coding Agents: What Works, What Fails, and What It Costs?

cs.SE cs.DCcs.LG ·2026-10-25 ·Hui Sun, Anderson Uchôa, Wesley K. G. Assunção
similarity 0.62
Abstract · 12 pages, 2 figures, 2 tables

A coding agent can migrate a machine learning workload, report success, and still change how the model trains. Rising compute costs, limited accelerator capacity, and vendor dependence are pushing organizations toward alternatives to graphics processing units (GPUs); a key question is whether agent-generated migrations to tensor processing units (TPUs) can be trusted and at what cost. We build a dataset of 148 PyTorch ML research projects and use Claude Code to migrate ten of them from NVIDIA GPUs to Google Cloud TPUs. We independently assess whether each migration runs, preserves numerical behavior, executes on the intended hardware, maintains the project's goal, and delivers acceptable performance. We also examine failures, human effort, and costs. Eight projects meet our project-goal criterion, and migrations require 2.4 human interventions on average. Of 70 execution attempts, 53 fail (76%), and 26 of these failures (49%) raise no error. The most frequent cause is repeated compilation and other execution inefficiencies, while interactions with third-party libraries can silently change the computation: in one four-chip migration, the agent reports success despite a change in gradient clipping that reduces accuracy from 86.53% to 84.89%. Execution costs vary widely: in one workload, TorchTPU, a PyTorch execution backend for TPUs, trains 1.86 times faster and 25% cheaper per run than the GPU. For practitioners, these findings motivate independent reference runs, verification under the intended hardware configuration, and workload-specific acceptance and stopping criteria that account for both computational and human costs.

0.20

Warpline: Binary-Level Tracing and Unified Evidence for Agentic GPU Kernel Optimization

cs.PF cs.PL ·2026-11-03 ·Junyu Yin, Vinod Grover, Keren Zhou
similarity 0.62
Abstract · 14 pages, 7 figures, 2 tables

LLM agents are becoming GPU kernel engineers, but they still tune kernels without seeing where the time goes. Hardware profilers report how busy each unit was, not where each warp's time went; intra-kernel tracers can show it, but only with hand-placed probes and a recompilation that alters the very kernel being measured. We present Warpline, which gives agents this view automatically while leaving the kernel essentially unchanged. Warpline analyzes the binary to decide which events to record and inserts probes into the binary itself without recompilation or any manual step. It then aligns the trace with hardware profiling data on one unified timeline. Because it needs only the binary, it can regenerate this evidence for every new version of the kernel at whatever level the agent edits it (source, IR, or PTX), closing the optimization loop without human intervention. On NVIDIA B200, across 35 kernels in Triton, CuTe DSL, and CUDA C++, Warpline adds a median overhead of 1.2% and leaves a median 99.9% of executed instructions unchanged, whereas existing tracers have median overheads of 1.6% to 13.2% and leave only 4.6% to 32.7% unchanged. Warpline also traces closed-source kernels, which these tracers cannot. On 10 SOL-ExecBench problems, agents using Warpline spend less time and fewer model requests than a bare coding agent and NVIDIA's Kernel Design Agents (KDA), yet lead both after every round in geometric mean and reach a 7.69$\times$ geometric-mean speedup, against 6.94$\times$ and 6.13$\times$. Two case studies further demonstrate that Warpline reveals hidden bottlenecks and provides actionable optimization insights.

0.20

KernelOPT: Dispatch-Aware Agentic Search for GPU Kernel Optimization

cs.DC cs.AIcs.LG ·2026-09-24 ·Aheli Poddar, Sanskar Prasad, Arindam Samanta, Subha Chakraborty, Vishal Goyal +1 more
similarity 0.62
Abstract

Deep learning inference and training performance depends critically on GPU kernel efficiency. Modern compilers such as PyTorch Inductor automatically generate GPU kernels from high-level model code, but frequently underperform expert-written implementations by wide margins. Recent LLM-assisted kernel optimizers can close this gap for standalone kernels, yet treat compiled models as black boxes, generally optimizing individual standalone kernels without respecting the compiler's structural decisions or verifying the model end-to-end. We present KernelOPT, a multi-agent system that treats compiled models as structured artifacts. It preserves vendor library calls (cuBLAS, cuDNN) and exclusively targets generated Triton sub-kernels using five profiling-guided LLM agents. A four-gate verification cascade applies static validation, multi-seed correctness checking, model-level float64-fallback verification, and performance gating ($γ{=}1.03$) to filter candidates and verify the re-stitched model end-to-end. When candidates fail verification, the system preserves the compiler baseline. The system accepts PyTorch nn Modules, standalone Triton kernels, and Helion kernels. Evaluated on 250 KernelBench problems (100 Level 1, 100 Level 2 and 50 Level 3) on NVIDIA H200, KernelOPT achieves geometric mean speedups over torch compile of 1.40$\times$ (L1), 1.15$\times$ (L2), and 1.07$\times$ (L3) across all kernels, including fallback cases. Optimized-only geomeans (excluding cases where verification gates preserve the compiler baseline) are substantially higher: 2.54$\times$ (L1: 36/100), 1.84$\times$ (L2: 23/100), and 1.37$\times$ (L3: 11/50), reflecting where the optimizer achieves meaningful leverage.

0.29

Dissecting an Unexplored SASS Control-Code Field: Barrier Exemption and Programmable Warp Priority

cs.AR cs.DCcs.PF ·2026-11-18 ·Ziwen Wang, Qi Luo, Kunlin Li, Changxi Liu, Dongsheng Wang +1 more
similarity 0.62
Abstract · 7 pages, 6 figures, 3 tables

Every instruction in NVIDIA's native GPU ISA (SASS) carries a control code that guides hardware scheduling, and prior work has decoded its known fields to optimize GPU kernels. However, one control-code field remains unexplored: it appears over 500000 times in NVIDIA's closed-source libraries such as cuBLAS and cuDNN, yet nvcc never emits it when compiling user programs. This paper presents the first systematic study of this control-code field across GPU architectures from Volta to Blackwell. Using instruction-level microbenchmarks, we show that the field controls two independent hardware mechanisms: barrier exemption (EXEMPT), which allows instructions blocked by a pending barrier to issue early during the barrier wait, and programmable warp priority (START, TILE, and END), which moves warps across three priority levels in the hardware scheduler. We identify the conditions under which each mechanism improves GPU kernel performance and implement a post-compilation binary optimizer that places these marks directly in compiled binaries without modifying source code or the compiler. Evaluated across six GPUs spanning four architectures, our optimizations speed up representative kernels by up to 31.9%, and the optimizer accelerates production kernels in llama.cpp and vLLM by up to 5.4% and end-to-end LLM inference by up to 3.6%.

0.14

TrainBridge: Agentic NPU Training Optimization Guided by GPU Compilation Evidence

cs.CL cs.AI ·2026-10-21 ·Yupeng Chen, Kunxiang Zhao, Xingjian Wang, Yue Zhao, Yijing Wu +4 more
similarity 0.62
Abstract

We study how to improve training efficiency on Ascend NPUs. In the NPU training programs we study, framework-level compilation optimizations such as operator fusion are only partially applied, leaving fragmented computation and avoidable execution overheads. Profiling-guided tuning can address these inefficiencies, but it often requires costly trial and error. To make training on NPUs more efficient, we propose TrainBridge, an agentic approach for transferring GPU optimization guidance to NPU training. TrainBridge uses the highly optimized execution produced by mature GPU compilation stacks as a task-specific reference for NPU tuning. It extracts optimization intents from the GPU training execution to guide NPU program rewrites and further refines the rewritten program through iterative profiling. Our GPU-to-NPU migration experiments show that TrainBridge achieves an average 1.7x speedup across four workloads covering LLM pretraining, image classification, and vision-language training, and an average speedup of nearly 2.0x across 27 Modded-NanoGPT speedrun records with highly optimized GPU implementations.

0.16