CS Paper Radar

Let CSP Be Your ANCHOR: Adaptive Crystal Search over Frozen Structure Priors

Emma Lei Hovmand, Jonas Elsborg, Melih Kandemir, Arghya Bhowmik

cs.LG cond-mat.mtrl-sciphysics.comp-ph ·submitted 2026-09-27 09:35 UTC · v2
position

Abstract

De novo crystal generation (DNG) models decide where to search in composition space and how to generate structures with one set of weights. We argue that discovery is better served by separating the two. A crystal structure prediction (CSP) model is a physical prior that should be improved by likelihood training, while rewards, including novelty measured against the search's own history, should act on a search over compositions. We introduce ANCHOR, a GRPO composition policy trained with multi-objective rewards around a frozen CSP model, and continuous adaptive novelty (CAN), a graded novelty score against known structures and a growing discovery history. Using the frozen CSP model as a fixed ruler under one evaluator, we test where adaptation should act. Replacing DNG compositions with ANCHOR's policy on the same CSP backbone raises MSUN from 11.4% to 47.6% and SUN from 1.1% to 22.1% at 99.9% formula uniqueness. Fine-tuning DNG models directly on the same rewards instead moves their composition marginal without raising their on-hull fraction. We show that KL-regularized fine-tuning of a DNG model can only reweight chemistry the pretrained model already supports by a bounded factor, while unregularized DNG fine-tunes move toward known or less stable chemistry. Even a stability-only reward routed into ANCHOR's CSP backbone roughly halves SUN relative to the frozen backbone, whereas likelihood training on structures found during search can improve a CSP backbone. Under MatterGen's evaluation pipeline, ANCHOR raises state-of-the-art MSUN from 29.2% to 41.3%, transfers without retraining to two further CSP backbones, and reaches 47.1% after distillation into Crystalite-CSP. As with any model optimised against a potential, its on-hull rate depends on that potential.

Comment
52 pages, 2 figures, 23 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Diffusion Tree Sampling for Inference Time Adaptation of Crystal Generative Models

cs.LG cond-mat.mtrl-scics.AI ·2026-11-12 ·Daniel T. Levy, Vineet Jain, Tara Akhound-Sadegh, Sékou-Oumar Kaba, Siamak Ravanbakhsh
top venue similarity 0.64
Abstract · 24 pages, 7 figures. Accepted to NeurIPS 2026

Diffusion-based generative models have become strong priors over plausible crystal structures, but turning that prior into promising candidates requires steering toward several conflicting properties at once. Fine-tuning is expensive and produces a new model for every new objective, while differentiable guidance is not applicable to many real-world tasks. We instead adapt these generative models at inference time using Diffusion Tree Sampling (DTS), a Monte Carlo tree search procedure over the denoising trajectory. We make two technical contributions on top of DTS that are particularly relevant for AI-for-science applications. First, we show how to use existing property-conditional generative models (e.g., models fine-tuned for classifier-free guidance) as guided proposals inside DTS, without distorting the target distribution. Second, we extend DTS to multi-objective sampling, so that a single search produces samples spanning an entire Pareto front. We instantiate both adaptations on de novo crystal generation: improving the stability of crystals generated by different models, using pretrained conditional models to generate crystals belonging to rare space groups or with high bulk modulus, and generating crystals along a Pareto front of high dielectric constant and high bandgap materials. Across these tasks, DTS-based inference-time adaptation successfully improves model outputs without modifying the models themselves.

0.29

Deep Generative Crystal Structure Prediction: A Benchmark Study and a Controlled Test of Prototype Dependence

cs.LG cond-mat.mtrl-sci ·2026-09-22 ·Lai Wei, Rongzhi Dong, Ying Feng, Madeline Miklos, Jianjun Hu
benchmark similarity 0.64
Abstract · 18 pages

Deep generative models are widely reported to enable de novo crystal structure prediction (CSP), but their capability has not been measured consistently against template-based methods. We evaluate 12 representative generative CSP models, spanning latent-variable, diffusion, flow-matching, autoregressive, and manifold random-walk architectures, against TCSP 2.0 on 180 test structures and a leakage-controlled subset of 46. All methods use identical structure-matching, symmetry, and consensus criteria. Template retrieval is the strongest single method, reaching 68.3% top-1 success; symmetry-aware EquiCSP (66.4%) and Uni-3DAR (62.9%) form the next tier. However, comparison with TCSP 2.0 shows that most structures correctly predicted by generative models are also correctly predicted by template substitution. Thus, the set of structures uniquely reachable by generation is small, limiting its practical advantage for discovering structures outside existing prototype libraries. To test the source of this performance, we removed entire stoichiometric prototype families from the training set and retrained the strongest generative model. Accuracy declined by 50-78% across four families, establishing that performance is substantially prototype-dependent. A small minority of structures survived removal of their prototype family, demonstrating a real but limited retrieval-independent predictive capacity. Present generative CSP models therefore function largely as implicit, softer-edged prototype libraries rather than genuinely de novo predictors. Enlarging this residual capacity, rather than aggregate match rate alone, is the central open problem.

0.31

Reinforcement Learning on the Discrete Composition Channel of a Crystal Generator: Validated Gains and Reward Hacking

cs.LG cond-mat.mtrl-sci ·2026-10-02 ·Pawan Prakash, Philipp Höllmer, Addis Fuhr, Peter Hirschfeld, P. Ganesh +2 more
benchmarkcode/data similarity 0.64
Abstract · 26 pages, 4 figures, 12 tables. Code: https://github.com/paprakash/OMatGRPO. Models and structures: https://huggingface.co/paprakash/OMatGRP…

Inverse materials design is a long-standing goal of computational materials discovery. Generative models for crystalline materials are typically trained to match the distribution of a structure database, while nothing in their training objective points them at specific design goals such as targeted properties. We use group-relative policy optimization (GRPO) to align a generative model based on stochastic interpolants and discrete flow matching with general black-box reward functions through reinforcement learning. Atom types are generated by a discrete flow and the policy gradient of our generalization of GRPO directly acts on the likelihoods of the atom-type transitions, which differentiates our work from previous reinforcement-learning approaches for diffusion and flow-based generative models of crystalline materials. We introduce a reward function that raises the yield of metastable, unique and novel structures (mSUN) from 13.4% for the pretrained model to 45.5% for the reinforced model, as evaluated by a community benchmark. Our reward also improves the performance of a reinforcement learning framework for crystalline materials based on latent denoising diffusion models. At the same time, we find that directly reinforcing atom-type transition likelihoods enables reward exploitation that has to be prevented with explicit guards. The same analysis also exposes a gap in the community metric. Single-element structures in distinct packings are counted as metastable, unique and novel materials and inflate mSUN without yielding any new compounds. A stability claim is only as good as its reference hull. We report every result split by the number of reference phases behind it and argue that benchmarks should do the same.

0.25

DSADiff: Data Structure-Aware Diffusion for Crystal Structure Prediction via Mitigating Complexity- and Imbalance-Induced Biases

cs.LG cond-mat.mtrl-sci ·2026-11-17 ·Jiang Xiaobo, Dinghong Lai
benchmark similarity 0.63
Abstract

Crystal Structure Prediction (CSP) is an important step in accelerating the generation and discovery of new materials. In recent years, diffusion-based CSP methods have made significant progress. However, existing models still suffer from generation bias when facing diverse materials spaces, while systematic approaches for tracing the sources of such performance variations remain limited. To address this issue, we propose LAS (Layered Analysis Strategy), a mechanism analysis framework that identifies crystal complexity and elemental composition imbalance as two key factors affecting generation difficulty and further reveals their relationships with model generation performance. Building on these findings, we further propose DSADiff (Data Structure-Aware Diffusion), a data structure-aware diffusion model that transforms the key factors identified by LAS into a unified generation difficulty representation and uses it to jointly drive feature modeling and training strategy optimization. This enables the model to adapt its representation and generation capability to samples with different data structures and difficulty levels, thereby mitigating learning bias across samples. Experiments on three CSP benchmark datasets, including Carbon-24, demonstrate that DSADiff consistently improves both Match Rate and RMSE, with a maximum Match Rate improvement of 9%, surpassing existing state-of-the-art methods and achieving new state-of-the-art performance. This work deepens the understanding of diffusion-based CSP models from the perspective of generation bias and provides a new direction for designing less biased generative models for complex materials spaces.

0.24

CURIO: Curiosity-Driven Test-Time Learning for Open-Ended Discovery

cs.LG cs.CL ·2026-10-04 ·Tao Feng, Fangxu Yu, Zijie Lei, Jiaru Zou, Changjiang Jiang +3 more
similarity 0.62
Abstract

Open-ended discovery requires learning from repeated attempts while continuing to explore directions whose value is not yet apparent. Search with a frozen large language model (LLM) can reuse previous solutions in context, but cannot update the model from its successes and failures on the test problem. Reinforcement learning (RL) enables such adaptation; however, strongly favoring high-reward trajectories may suppress low-reward yet potentially promising directions too early. We introduce CURIO, a curiosity-driven test-time learning framework that complements task feedback with an Intrinsic Curiosity World Model (ICWM). The ICWM learns transitions in the policy's hidden-state representation and supplies prediction-error bonuses at sampled tokens outside the policy's top-k choices. Epoch normalization and an annealed weight regulate their contribution to the policy update. On six mathematical discovery tasks and single-cell denoising with Qwen3 backbones from 8B to 235B, three-run means improve over a matched task-only RL control on five mathematical objectives, match the best reported performance on Circle Packing, and improve denoising Score and mean squared error (MSE) on both held-out corpora at every tested scale. Relative gains reach 18.3% on Hadamard and 10.8% on denoising Score. Code-diversity measurements show greater structural variation among generated programs, supporting curiosity as a complementary exploration signal for learning in open-ended discovery.

0.22

LLMs as Acquisition Policies for Finite-Pool Materials Optimization: A Controlled Study

cs.AI ·2026-08-20 ·Dino-Rober Demir, Florian Le Bronnec, Rio Yokota
similarity 0.61
Abstract

Discovering materials with desirable properties often requires searching large candidate spaces while experimental or computational evaluations remain costly. Active learning addresses this challenge by using previous observations to select which candidate to evaluate next, typically through probabilistic surrogate models. We investigate whether open-weight large language models (LLMs) can serve as standalone acquisition policies in this setting. We evaluate five LLMs across four retrospective finite-pool materials optimization tasks under different candidate-presentation strategies and compare them with random selection and conventional Gaussian-process methods. LLM policies generally reach the global optimum in fewer iterations than random selection, indicating that they provide a useful acquisition signal without task-specific training. Their performance relative to Gaussian-process methods is mixed: conventional acquisition performs better on most tasks, while LLMs match or outperform it in some settings. Performance varies substantially across tasks, models, initializations, and candidate presentations, with no LLM approach performing best across all tasks. Overall, open-weight LLMs show potential as acquisition policies for finite-pool materials search, although their reliability remains sensitive to the task and to how candidates and scientific context are presented.

0.38

Elite-Weighted Supervised Fine-tuning for Goal-Directed Molecular Optimization

cs.LG ·2026-08-31 ·Shiyun Wa, Yifei Wang, Anna G. Green, Simone Sciabola, Ye Wang
benchmark similarity 0.60
Abstract

Goal-directed optimization is essential for steering molecular generators to propose candidates with desired properties. However, it is often implemented with policy-gradient reinforcement learning, which requires a generation-trajectory log-probability whose form depends on the model architecture and generation procedure. This makes an optimizer difficult to reuse across architectures and conditional generative designs. Supervised fine-tuning needs none of that machinery, but its update is driven by a fixed dataset, so the reward never enters the update. We introduce Elite-Weighted Supervised Fine-tuning (EW-SFT), which uses reward to guide elite selection of high-scoring molecules, and updates the model by its own pretraining loss on that set. Ablations show that reward information is passed primarily through elite selection, rather than through continuous weighting within the selected set. Because the update consumes only scored molecules and the model's native loss, the same rule applies across autoregressive, masked-diffusion, and discrete-flow generators, and across de novo, motif-extension, and linker-design tasks. Under a fixed budget of 3D shape alignment oracle calls on two kinase reference compounds, EW-SFT consistently outperforms the corresponding native optimizers. It further improves goal-directed optimization under a 2D similarity oracle on four held-out references and achieves comparable performance on a sample-efficiency benchmark without a trajectory-level RL formulation. These results demonstrate that EW-SFT is a unified and effective optimizer across molecular generators, design constraints, references, and oracles.

0.21

Learning Materials Properties from Scarce Labels and Unlabeled Crystals

cs.LG cs.AI ·2026-08-31 ·Wentao Li, Yizhe Chen, Jiangjie Qiu, Yijun Li, Leyi Zhao +1 more
benchmarkcode/data similarity 0.60
Abstract

Learning materials properties from scarce labels and unlabeled crystals is a central challenge for data-driven materials discovery. We present SemiMat, a controlled benchmark for semi-supervised materials property regression, and MatRank, a reliability-weighted objective for continuous pseudo-label uncertainty. SemiMat fixes labeled and unlabeled crystal inputs, graph-backbone interfaces, validation-only checkpoint selection, held-out test reporting, normalized MAE (NMAE), and method-rank summaries across six scarce-label tasks, four graph backbones, and five predefined split runs. MatRank builds pseudo-targets from labeled anchors, weights them by local reliability and weak-prediction agreement, trains weak and strong graph views consistently, and adds ranking signals so that unlabeled crystals shape both values and candidate order. Across the retained 24 backbone-task blocks, one fixed MatRank objective gives the lowest aggregate held-out test NMAE (0.896) and best average method rank (2.208). The component, OOD, and generated-pool diagnostics identify where the gain is reliable and where further screening evaluation remains necessary. Code is available at https://github.com/littlepeachs/SemiMat.

0.40