CS Paper Radar

GeoShrink: Accelerating Diffusion Transformers with Two Lines of Code

Haosen Li, Wenshuo Chen, Shaofeng Liang, Lei Wang, Bowen Tian, Yutao Yue

cs.CV ·submitted 2026-09-27 16:25 UTC · v1

Abstract

Diffusion transformers incur substantial inference cost through repeated model evaluations along a sampling trajectory. We introduce GeoShrink, a training-free acceleration method that retains the original solver grid while evaluating the model only at a prescribed set of anchors. At skipped stages, GeoShrink predicts the solver-facing output by adding a geometrically retained fraction of the latest observed innovation to the most recent exact output. We derive this rule from chordal tangent transport and round-trip line projection, and establish a geometric anchor-spacing principle that minimizes the largest adjacent gap expansion under fixed coverage and first span. The analysis characterizes the geometric closure and propagation of prediction errors without assuming access to future model outputs. Experiments cover image, video, motion, and audio generation, together with adapted 3D backends. At approximately $5\times$ acceleration, GeoShrink improves FLUX PSNR by 3.10 dB over the strongest listed baseline. On HunyuanVideo, it achieves a reported $4.99\times$ speedup and improves ChronoMagic-Bench-150 PSNR by 5.44 dB over the strongest listed fidelity baseline. Comparisons at fixed evaluation budgets further show substantial gains on motion, audio, music, and 3D generation.

Closest papers

Nearest neighbours by meaning across the whole index.

GeoSPRINT: Geometric Redundancy-Aware Step Pruning for Inference in Diffusion Trajectories

cs.LG cs.AI ·2026-09-02 ·Arpita Joshi
similarity 0.68
Abstract

Diffusion models achieve high sample quality but remain expensive at inference time because sampling requires many sequential neural function evaluations (NFEs). Existing acceleration methods either use fixed step-skipping schedules, adapt step sizes based on local numerical error, or require additional training. We introduce GeoSPRINT (Geometric Step Pruning for Inference in Trajectories), a training-free framework for constructing non-uniform sampling schedules from the geometry of denoising trajectories. GeoSPRINT detects geometrically redundant steps using a hyperplanarity test in latent space, implemented efficiently via QR factorization, and converts the resulting redundancy profile into a sampling schedule that allocates more steps to high-curvature regions of the trajectory. In addition, we introduce the trajectory projection score $α_{\mathrm{traj}}$, a residual-variance metric that quantifies trajectory straightness and serves as a model-free diagnostic for rectified flow quality. Across CIFAR-10 ($32{\times}32$), LSUN Church ($256{\times}256$), and Stable Diffusion v1.5 ($512{\times}512$ latent), GeoSPRINT consistently improves over uniform DDIM (Denoising Diffusion Implicit Models) schedules at matched NFE budgets. On CIFAR-10, GeoSPRINT improves FID (Fréchet Inception Distance) by 0.7-1.1 over DDIM across 49-89 NFEs and surpasses DPM-Solver++ at NFE${\geq}30$ despite using a first-order DDIM solver. On LSUN Church, it reduces FID from 1.48 to 1.26 at 52 steps, and on Stable Diffusion v1.5 it achieves up to 1.93 FID improvement over DDIM. These results show that trajectory geometry provides a useful global signal for allocating inference steps and that schedule quality can substantially improve diffusion sampling efficiency without retraining.

0.16

ChebBooster: A Training-Free Approach for Efficient Diffusion Transformer Inference via Chebyshev-Inspired Extrapolation

cs.LG cs.AI ·2026-08-24 ·Chengjie Lu, Tianchi Deng, Zhengqi He, Chengwen Luo, Xueliang Li
similarity 0.68
Abstract

Diffusion Transformers (DiTs) have shown strong performance in high-fidelity image generation, but their sampling process remains computationally intensive due to full model execution at every timestep. While cache-based acceleration has been explored to mitigate inference cost, naive reuse schemes suffer from low accuracy over long intervals, and Taylor-series-based extrapolation methods often face instability caused by Runge oscillations. In this paper, we propose ChebBooster, a training-free extrapolation framework based on Chebyshev polynomial theory that achieves stable and efficient acceleration for DiTs. Specifically, we adopt the Barycentric formulation to evaluate Chebyshev approximants with high numerical stability and minimal overhead, and further decouple the extrapolation into an offline weight precomputation phase and a lightweight online application stage. Extensive experiments across three representative DiT-based models, including DiT-XL/2, PixArt-$Σ$, and FLUX.1-dev, demonstrate that ChebBooster achieves consistent improvements in visual quality and inference efficiency, reaching up to $3.68\times$ latency speedup and $5.12\times$ FLOPs reduction, outperforming existing training-free baselines under diverse generation tasks and resolutions.

0.22

ParaLin++: Accelerating Parallel Diffusion Integrator via Intrinsic Partially Linear Structure

cs.CV ·2026-10-22 ·Jianrong Lu, Zhiyu Zhu, Hui Liu, Junhui Hou
code/data similarity 0.65
Abstract

Training-free few-step samplers are often described as nearly quality-lossless under conventional FID/CLIP-style evaluation. It remains unclear whether that conclusion transfers to more realistic and complex generation-quality benchmarks. We first systematize the quality metrics used to evaluate training-free sampling acceleration for diffusion and flow-matching models. We find that representative training-free step-shortening methods often remain nearly lossless under FID/CLIP-class metrics, yet can suffer substantial quality degradation when evaluated with semantic-composition, dense-instruction, and long-text-rendering benchmarks such as GenEval, DPG-Bench, and LongTextBench. Parallel sampling is a notable exception: by retaining the full-step discretization and removing only the solver's temporal dependency, it can preserve near-lossless quality while accelerating sampling. Building on this observation, we propose \textit{ParaLin++}, a step-parity parallel sampler that preserves the full-step discretization while accelerating the solver iterations. Experiments across Stable Diffusion-v2, LSUN Church, FLUX.1-dev, and Ming-Flash-Omni 2.0 show that ParaLin++ preserves the full-step Euler quality profile at $2.6\times$--$4.8\times$, $1.68\times$ on FLUX, and $1.21\times$ on Ming. Project page: https://paralinplus.github.io/.

0.22

GeoCache: Training-Free Acceleration of Multi-View Texture Diffusion via Geometric Delta Transport

cs.CV cs.AI ·2026-08-13 ·Haotang Li, Zhenyu Qi, Shaohan Henry Wang, Kebin Peng, Yutong Zhao +4 more
similarity 0.65
Abstract

Geometry-conditioned multi-view diffusion enables high-quality 3D texture generation, but its repeated per-view denoiser evaluations introduce substantial computational cost. Existing training-free accelerators primarily exploit temporal redundancy by reusing computation across denoising steps. In multi-view texturing, however, skipping a step also removes the cross-view interaction that continually aligns different observations of the same surface, leading to rapidly degraded consistency and fidelity. Our analysis identifies a complementary source of redundancy: although intermediate features remain view-specific, geometrically corresponding surface points exhibit transferable evolution in their predicted clean signals. Based on this observation, we introduce \gc{}, a training-free plugin that evaluates a rotating subset of anchor views and transports their geometry-aligned per-step $\xz$ updates to the remaining views. Periodic full-view computation controls accumulated error, while sampler-consistent reconstruction preserves the denoising trajectory. \gc{} requires neither retraining nor architectural modification and uses the position maps already available in geometry-conditioned texturing pipelines. Across Hunyuan3D-2.1, SyncMVD, and MVPainter, \gc{} achieves a stronger speed--fidelity trade-off than temporal caches and step reduction at operating points above $2\times$. On Hunyuan3D-2.1, it delivers a $2.21\times$ denoiser-loop speedup with an MV-LPIPS of 0.0293 and an MV-PSNR of 33.60 dB, providing the best fidelity among all tested methods above $2\times$. The same transferred configuration reaches the highest speedup and lowest FLOPs on SyncMVD, while \gc{} achieves the lowest FLOPs and best fidelity among the accelerated methods on MVPainter. These results establish cross-view geometry as an effective acceleration axis for multi-view texture diffusion.

0.04

LiFT: Loop Flow Transformers

cs.LG cs.AI ·2026-10-04 ·Mohammad Mahdi Derakhshani, Pedro M. P. Curvo, Gertjan J. Burghouts, Jan-Willem van de Meent, Cees G. M. Snoek
similarity 0.65
Abstract

We introduce Loop Flow Transformers (LiFT), a family of looped generative models that scales computation by repeatedly applying a shared Diffusion Transformer (DiT) core, with only light changes to the standard architecture. Rather than asking every recurrent step for the final prediction, LiFT trains each step with a single regression target: a point on a straight path from the model's initial estimate to the flow-matching target. Because we index these targets by a continuous depth coordinate, a trained model can loop far beyond its training depth with no retraining, early exits, or other modifications. In our experiments, these longer rollouts improve generation, so inference computation can grow without adding parameters. On ImageNet at 256x256, LiFT-L/2 achieves an FID 3.34 points lower than our dense DiT-XL/2 baseline while using approximately 60% fewer parameters, 32% fewer training FLOPs, and 52% fewer inference FLOPs.

0.44

Memory-Efficient Training-Free Acceleration of Diffusion Transformers with BaryCache

cs.CV ·2026-08-24 ·Chengjie Lu, Tianchi Deng, Zhengqi He, Zhijian Gao, Huisi Wu +1 more
published similarity 0.64
Abstract · Accepted by ICITES 2026

Diffusion Transformers achieve high-fidelity image and video generation, but their iterative sampling remains expensive, for each denoising step requires large matrix operations. Existing cache-based acceleration reduces redundant computation yet increases the VRAM footprint by storing intermediate states, which can directly constrain inference batch size. In this work, we propose a training-free acceleration method that performs stepwise forecasting for DiT sampling using a Barycentric Extrapolator. By leveraging barycentric extrapolation, our predictor is numerically stable and alleviates oscillatory artifacts analogous to the Runge phenomenon during forward forecasting. Across extensive experiments on both image and video generation, our approach provides a favorable trade-off between memory usage and perceptual quality, while delivering up to 3.30x end-to-end sampling speedup compared with baseline DiT inference.

0.18

Rethinking the design space of Vanilla Pixel Diffusion Transformers

cs.CV cs.AI ·2026-10-16 ·Soumik Mukhopadhyay, Long Mai, Abhinav Shrivastava, Aniruddha Mahapatra
similarity 0.63
Abstract · Project webpage: https://soumik-kanad.github.io/mflow-diffusion/. 33 pages, 23 figures, 15 tables. Submission under review

Pixel-space diffusion models have recently re-emerged as a compelling alternative to latent diffusion, avoiding the lossy latent bottleneck and separately trained autoencoder. JiT shows that a vanilla diffusion transformer can generate directly in pixel space by replacing the commonly used velocity prediction ($\boldsymbol{u}$-prediction) with clean image prediction ($\boldsymbol{x_0}$-prediction). In this work, we revisit this choice and introduce MFlow, an adaptive parameterization that learns to interpolate between $\boldsymbol{x_0}$- and $\boldsymbol{u}$-prediction across principal directions of the data, learned end-to-end with diffusion training. We find that the preferred parameterization varies systematically with the data representation and model capacity -- notably, increasing model capacity shifts preference toward velocity prediction. We evaluate MFlow across ImageNet, UCF-101 video, and large-scale text-to-image generation, demonstrating competitive or improved generative performance across diverse settings. In addition, we find that vanilla pixel diffusion transformers, irrespective of parameterization, retain a persistent high-frequency deficit relative to real images. To address this, we introduce ConvRefiner, a lightweight convolutional module trained post-hoc with an adversarial loss while keeping the diffusion backbone frozen. With only a small amount of additional training, ConvRefiner restores the high-frequency statistics of generated images while preserving FID. Project webpage: https://soumik-kanad.github.io/mflow-diffusion/.

0.44

JtT: Rethinking Point Trajectory Diffusion for Diverse and Rigid Motion from an Image

cs.CV cs.LG ·2026-10-12 ·Gabrijel Boduljak, Yushi Lan, Christian Rupprecht, Andrea Vedaldi
similarity 0.61
Abstract

We study forecasting rigid-body motion from a single image: generating diverse and physically plausible future trajectories for arbitrary points in a scene, without building rigidity into the architecture or relying on geometric inputs such as depth. Like video generators, recent trajectory generators fail at this task, even in simple synthetic Kubric scenes, despite scaling up model size and training on real data. We show how to solve this with the right architecture and parameterization. Our model, JtT, is a simple diffusion transformer that operates directly in coordinate space and decodes arbitrary and dense query patterns, without the trajectory VAEs or fixed grids assumed in prior work. Through a systematic study of the design space of point trajectory diffusion, we find that diffusing per-frame velocities is the only parameterization that captures rigidity, that it must be paired with the right timestep schedule, and that adding full-resolution RGB at the query points resolves the boundary failures of prior methods. However, evaluating such 2D models rigorously is itself non-trivial. To our knowledge, we are the first to observe that physical plausibility and diversity do not improve together during training: larger models, as used in prior work, memorize the single ground-truth future per training image, becoming more rigid while covering fewer possible futures. Yet prior work has paid little attention to this, so we show how model rankings depend on model size, metric, and stopping time, and adopt a stricter, checkpoint-averaged evaluation protocol. Under this protocol, JtT improves over prior methods on both distributional and rigidity metrics and approaches ground-truth rigidity, with only about 50M parameters.

0.21