CS Paper Radar

Augmenting Visual Anomaly Detection with Automated Interpretability

Antonio De Santis, Arsenio Leo, Marco Brambilla

cs.CV cs.AI ·submitted 2026-09-27 18:13 UTC · v1

Abstract

Visual anomaly detectors identify deviations from known-normal data, but their anomaly signals may mix evidence of actual anomalies with benign visual variation. We investigate whether automated interpretability can augment visual anomaly detectors by identifying and intervening on different components of this signal. We decompose PatchCore nearest-normal residuals into sparse features using Sparse Autoencoders (SAEs), and provide high-activation and contrastive non-active examples to a Multimodal LLM, which describes each feature and labels it as anomaly, distractor, or uncertain. These labels guide interventions in the SAE hidden representation, where distractor features are suppressed and anomaly features amplified. The edited representation is then used to reconstruct patch embeddings, which are rescored with PatchCore. Across 40 categories from four benchmarks, applying both interventions jointly improves macro-average image-level AUROC from 0.8724 to 0.8857 on source data and from 0.8066 to 0.8210 under synthetic corruptions. On three additional RobustAD categories with real acquisition shifts, the same interventions improve AUROC from 0.8745 to 0.9056 on source data and from 0.6069 to 0.6599 under real acquisition shifts. Finally, individual feature interventions across all 43 categories show that the MLLM labels are aligned in aggregate with how features differently affect normal and anomalous images.

Comment
Preprint

Closest papers

Nearest neighbours by meaning across the whole index.

Cross-Encoder Anchor Refinement for Zero-Shot Anomaly Detection

cs.CV ·2026-10-29 ·Kaisong Ji, Ziyang Xu, Chang Bian, Yu Zhou, Wenyu Liu +1 more
similarity 0.73
Abstract · 15 pages, 6 figures

Zero-shot anomaly detection aims to transfer anomaly discrimination from auxiliary training domains to unseen categories while localizing subtle defects. A key challenge is to construct discriminative references that combine contextual representations with complementary local evidence. We present Cross-Encoder Anchor Refinement (CEAR), which connects two visual encoding paths for the same image at the anchor stage, before normal and anomalous prototypes are constructed. An independent convolutional encoder pretrained for industrial product recognition builds an image-specific memory shared across selected vision transformer (ViT) layers. Spatial anchors read from ViT patch features query this memory through cross-attention and undergo residual refinement. Image-conditioned normal and anomalous queries then gate anchor aggregation to construct prototypes for anomaly scoring. Across 13 industrial and medical datasets, CEAR achieves the best performance in 57 of 68 evaluations spanning image-level detection and pixel-level localization. Notably, CEAR surpasses all other state-of-the-art methods in 41 of 44 pixel-level comparisons. Across 11 localization datasets, mean gains in pixel-level maximum F1 score and average precision are 4.45 and 3.79 percentage points, respectively. This study shows how cross-encoder interaction at the anchor stage can integrate complementary visual representations for fine-grained anomaly localization across domains.

0.08

LEAP: a Latent Embedding Anomaly Patch-Transformer for time-series anomaly detection

cs.LG ·2026-10-26 ·Cristhian Moya-Mota, Ignacio Aguilera-Martos, Diego García-Gil, Julián Luengo
similarity 0.71
Abstract

Time-series anomaly detection is dominated by reconstruction-based neural detectors, whose objective is structurally flawed. Since the target is also the input, an expressive model can learn to reconstruct anomalies too, leaving uninformative residuals. Recent large-scale benchmarks show that, on curated data, elaborate deep detectors rarely beat simple statistical baselines, while current leaders rely on representation learning. We propose LEAP (Latent Embedding Anomaly Patch-Transformer), which combines masked prediction with latent representation-based anomaly evidence, without relying on reconstruction or attention-based scoring. The model removes patches from a window and predicts them from the remaining temporal and cross-channel context, so prediction errors measure how well learned dynamics explain hidden segments. Deterministic complementary group masking ensures every time step is scored while hidden, with identical visible fractions during training and inference. LEAP adds three label-free evidence sources: latent-embedding novelty calibrated by local density, local temporal contrast, and per-channel novelty pooled over channels selected by six label-free criteria. Under the TSB-AD protocol, the full model achieves a VUS-PR of $0.5179 \pm 0.0022$ on $180$ held-out multivariate series. On TSB-AD-U, a univariate variant combining multi-scale masked-prediction scoring with latent novelty, without contrast or channel-pool novelty, achieves $0.6194 \pm 0.0016$ on $350$ held-out series. Both results average three random seeds. A five-stage ablation on TSB-AD-M, supported by paired Wilcoxon signed-rank tests, shows statistically significant gains from each successive component.

0.06

Fine-Grained Anomaly Perception in Wild UGC-Enhanced Images: A Comprehensive Dataset and Difference-Fusion Framework

cs.CV cs.AI ·2026-09-02 ·Yan Zhong, Gefei Chen, Qiufang Ma, Zhen Wang, Zhiwei Fan +2 more
benchmark similarity 0.71
Abstract

Image enhancement and restoration have become standard back-end operations on short-video and social media platforms to boost UGC visual experience. Yet these processes inevitably introduce visual anomalies--especially in faces, texts, and textures--that directly undermine perceptual fidelity and viewer trust. While existing IQA methods perform well on classic distortions, they target holistic quality assessment and fail to capture the specific, localized anomalies caused by enhancement algorithms in real-world UGC. To bridge this gap, we formally define a new task-quality Anomaly Perception for UGC image Enhancement (UEAP), and contribute the first UEAP benchmark dataset, named UEAP-4k, curated from the real business scenarios. It provides fine-grained annotations for anomaly categories, localization and severity levels. Furthermore, we propose a Difference-Fusion Anomaly Perception Method (DFAP-UGC) for wild UGC-enhanced images, which leverages explicit problem-reference difference fusion with dense spatial querying, regional verification, and quality-aware ranking, enabling robust anomaly identification in challenging scenarios. To handle the inherent coupling of subtasks in this new task, we propose a Locality-Aware Dynamic Task Prioritization (LADTP) training strategy that enables effective end-to-end learning and eliminates multi-stage overhead. Extensive experiments show that our method outperforms baselines adapted from classical approaches for this task, validating the value of this dataset and the superior of DFAP-UGC for robust UGC-enhanced image anomaly perception. Code and data will be public.

0.13

Robust Logical Anomaly Detection under Capture Shifts via Synthetic Anomalies

cs.CV cs.LG ·2026-10-13 ·Ufuk Efe, Alptekin Temizel
benchmark similarity 0.70
Abstract · 42 pages, 10 figures, 15 tables

Detectors of logical anomalies, such as missing, extra or wrongly combined parts, usually score a test image by its distance from normal (good) images. They achieve near-perfect image-level AUROC on standard industrial anomaly detection benchmarks such as MVTec LOCO, but their robustness to changes in capture conditions remains largely unexamined. Under a heterogeneous perturbation protocol in which each test image is randomly kept unaltered or subjected to a brightness reduction or a zoom-out transformation, the normal-reference methods we tested lose 9.7 to 34.1 AUROC points, and two of the strongest, CSAD and SALAD, fall from 97.7% and 96.4% to 68.1% and 62.3%. We propose a framework in which a classifier, trained on normal images and on synthetic anomalies, scores a test image without comparing it with normal data. From a short description of each product, a language model derives anomaly types and editing instructions, an image editor applies them to normal images, and the classifier learns to separate the edited images from automatically discovered normal sub-modes. With its full training recipe, the framework reaches 94.9% AUROC on clean images, 1.5 to 2.8 points below SALAD and CSAD, and 94.1% under the perturbation protocol. Trained without brightness or zoom-out augmentation, so that neither test perturbation occurs in training, it still reaches 92.5% (93.2% clean). These results suggest that clean benchmark scores can hide a strong sensitivity to capture conditions, and that learning the decision from both normal images and rule violations may reduce it.

0.14

Anchor and Adapt: Asymmetric Prompt Adaptation for Few-Shot Industrial Anomaly Detection

cs.CV cs.AI ·2026-10-04 ·Mengyang Zhao, Teng Fu, Haiyang Yu, Ke Niu, Bin Li +1 more
similarity 0.70
Abstract

In few-shot industrial anomaly detection, the few normal target images provide no direct defect supervision, making anomaly prompts difficult to learn from these samples alone. Some vision-language methods therefore use manually specified descriptions to supply explicit anomaly semantics. However, constructing these descriptions requires product-specific effort, and their effectiveness depends on prompt selection. We propose Anchor and Adapt, a two-stage prompt learning framework that separates the acquisition of anomaly semantics from adaptation to target normal appearance. Stage I learns transferable normal and abnormal anchors from annotated auxiliary data. Stage II keeps these anchors fixed and adapts an additional normal branch using the few target normal samples. The inherited and adapted normal branches jointly characterize target normality, with text-anchor regularization encouraging consistency with the generic normal prior and separation from the abnormal anchors. This design retains learned anomaly knowledge while reducing dependence on category-specific anomaly templates, without requiring synthetic anomaly generation. Cross-dataset experiments between MVTec-AD and VisA under 1-, 2-, and 4-shot settings demonstrate competitive detection and localization performance. Controlled ablations assess the roles of transferred anchors, asymmetric adaptation, dual-normal representations, and anchor regularization.

0.07

Differentiable Interval Bottlenecks for Interpretable Anomaly Detection in Numerical Data

cs.LG cs.AI ·2026-09-03 ·Lamine Diop, Marc Plantevit
top venuetheory similarity 0.70
Abstract · Accepted at ICDM 2026

Reconstruction-based anomaly detectors are accurate but opaque: a deep autoencoder flags a sample without telling a practitioner which feature ranges made it anomalous. We propose DIFFINT, an autoencoder whose latent bottleneck is structured as a set of soft, axis-aligned interval memberships learned end-to-end directly from raw numerical data, without any discretization or binarization. Each latent unit corresponds to a human-readable hyper-rectangle in feature space; an instance is encoded by how strongly it falls inside each interval relative to the other units, and its reconstruction error is the anomaly score. This keeps the power of differentiable representation learning while exposing an inspectable internal structure. We make the inductive bias precise: a certified reconstruction-error lower bound for points that fall outside every active coordinate of the learned support (with a Lipschitz-enforced decoder), and a graded, empirically verified suppression mechanism for the usual case in which only a few features are abnormal; and we provide a closed-form, label-free importance that ranks each (unit, feature) pair from quantities the model already maintains, turning trained intervals into auditable candidate constraints without ever seeing an anomaly label. On 48 ADBench benchmarks against 22 baselines under a common [-1, 1]-normalized protocol, DIFFINT attains the best mean rank overall on both metrics (4.10 on ROC-AUC, 4.16 on AUPR); among inlier-only detectors it leads its regime clearly, and it is competitive with the strongest contaminated-data detectors (see the stratified and complete-case analyses). It is the only interpretable detector in the statistically-tied leading cluster of seven methods.

0.34

Embedding Predictive Adaptation and Refinement for Multi-Modal Industrial Anomaly Detection

cs.CV ·2026-11-06 ·Jaeho Cho, Jinsik Bang, Taehwan Kim
published similarity 0.70
Abstract · Accepted to WACV 2027

Industrial Anomaly Detection (IAD) has evolved from 2D image-based approaches to multi-modal methods that leverage the complementary nature of RGB images and 3D point clouds. Among these, memory bank-based methods, which identify anomalies by the discrepancy between each query patch feature and its nearest normal prototype, have proven particularly effective. However, two limitations remain: (i) employing frozen pretrained encoders yields insufficient discrimination between normal and anomalous features due to the domain gap, while existing contrastive learning-based adaptation struggles to capture the spatial relationships required for precise localization; and (ii) pixel-level anomaly maps interpolated from patch-level distance scores remain coarse, lacking fine-grained detail. To address these limitations, we propose EPAR (Embedding Predictive Adaptation and Refinement). We adapt encoders by predicting the embeddings of masked regions to capture spatial relationships, together with patch-level Variance-Invariance-Covariance (VIC) regularization, resolving the poor discriminability between normal and anomalous features caused by the domain gap. We further propose a Noise Suppression Network that refines coarse maps by learning the relational discrepancy between each patch feature and its nearest normal prototype, rather than the anomaly's appearance. This relational signal remains valid for unseen real defects, despite being learned from synthetic anomalies. EPAR demonstrates strong practical applicability, excelling in few-shot settings and improving AUPRO@1% on MVTec 3D-AD and Eyecandies by +1.8% and +1.9%, respectively.

0.32

How to Explain your Unexplainable Video Anomaly Detector

cs.CV ·2026-11-16 ·Giacomom D'Amicantonio, Egor Bondarev
published similarity 0.70
Abstract · This paper has been accepted at the RWS workshop WACV 2027

Weakly-supervised Video Anomaly Detection (VAD) models assign anomaly scores from high-dimensional features, and their predictions remain unexplained. Saliency maps show where a model looks but not what it relies on, and the descriptions produced by Vision-Language Models (VLMs) are generated by branches that the anomaly score never reads. To address this faithfulness gap, we propose \textbf{Explain The Unexplainable (ETU)}, a classifier-agnostic framework that audits frozen VAD models through counterfactual interventions in their feature space. ETU maps video features to a discrete dependency graph of agents, actions and outcomes ($A_r \to A_a \to A_o$), regenerates the features by graph-conditioned diffusion with selected nodes of the graph masked, and measures the change in the score of a frozen detector; one set of interventions is applied unchanged to every detector. The generator is trained only to reconstruct the input features, so it cannot learn the contrast it is asked to measure, and we validate the audit with experiments that test every alternative explanation of its results, from the cost of regeneration to random deletions of matched size. On UCF-Crime features obtained from a CLIP encoder, we show that substituting the scene semantics results in the largest drop for most detectors, and that removing the outcome chain of the graph ($Δ_{rel}$) changes the anomaly score of all six audited detectors far more than removing the same number of random nodes, even though the random deletion perturbs the features about as much. We show that this targeted behavior comes from the divergence objective of the graph embedding. Without it, the two interventions become indistinguishable, and with a divergence objective in the generator as well, the score change of the detector follows the displacement of the reconstruction rather than the semantics that were removed.

0.33