CS Paper Radar

TacGooseBumps (TacGB): Retrofitting Normal-Only Tactile Sensors with Shear Encoding for Learning Contact-Rich Manipulation

Wenjie Li, Binyu Yang, Yuxin Chen, Ambrose Wang, Masayoshi Tomizuka

cs.RO ·submitted 2026-09-27 23:04 UTC · v2
hot direction

Abstract

Contact-rich policies often fail because distinct physical states look alike yet require different actions. Cameras may not reveal whether a connector is aligned or fully seated, while many normal-only tactile sensors can miss the tangential interactions perpendicular to the grasping direction that distinguish these states. We ask whether a learning policy needs calibrated shear measurements, or only a repeatable observation that separates shear-dependent contact states. We introduce TacGooseBumps (TacGB), a passive domed film that mechanically encodes tangential loading as pattern changes in an existing sensor's pressure map. Tangential loading tilts each dome and redistributes pressure across its footprint; an end-to-end policy consumes the resulting maps without added electronics, force reconstruction, or taxel-level dome alignment. Across four imitation-learning tasks and two data-collection pipelines, TacGB improves goal attainment, efficiency, and contact quality: insertion success increases by up to 36 percentage points, and successful insertions are completed faster, while fragile-object placement becomes gentler and drawing becomes more continuous and straight. Signal, stage-wise, failure-mode, and trajectory analyses link these gains to contact regimes in which task-relevant tangential interactions are poorly resolved by vision and normal pressure alone. Together, these results show that shear need not be measured metrically to benefit robot learning; it can instead be mechanically encoded without changing the underlying tactile sensor or the policy's pressure-map input format.

Comment
9 pages, 8 figures. Wenjie Li and Binyu Yang contributed equally. v2: added project website, updated references, and improved HTML rendering; results unchanged. Project website: https://jeffwli.github.io/tacgb/

Closest papers

Nearest neighbours by meaning across the whole index.

Touch2Trace: Tactile-Driven Imitation Learning for Dexterous Cable Tracing

cs.RO ·2026-09-14 ·Matteo Grimaldi, David Klee, Ziling Chen, Tong Jian, Wonju Lee +3 more
publishedhot direction similarity 0.75
Abstract · Accepted to CoRL 2026

Dexterous manipulation of deformable objects demands continuous fingertip-level regulation of pressure, friction, and incipient slip. We study one of the most challenging cases: dexterous cable tracing, feeding a cable through the hand with repeated pinch-and-curl motions of the thumb and index finger. We introduce Touch2Trace, a tactile-driven imitation-learning system for this task, and provide, to our knowledge, the first systematic real-world characterization of how encoder pretraining, control rate, temporal context, and spatial resolution each shape policy performance. The winning learning recipe combines a tactile encoder pretrained for a custom 32 x 32 piezoresistive sensor (TacV5) via self-supervised learning with a lightweight transformer policy trained on teleoperated demonstrations via behavior cloning, deployed at 60 Hz on a Tesollo DG-5F hand. Tactile feedback without vision or explicit cable-state estimation significantly improves tracing performance versus a proprioception-only baseline: from 0.2 cm to 20.1 cm mean distance and 0% to 93% success rate, with zero-shot transfer to unseen cables and routing conditions. The results quantify the influence of key parameters in tactile-driven systems for reliable dexterous deformable object manipulation.

0.35

Vision-Based Tactile Intelligence for Robotics: Sensing, Learning, and Embodied Manipulation

cs.RO ·2026-08-16 ·Peng Zhou, Jun Hu, Sihan Chen, Zeqing Zhang, Haofei Ma +10 more
similarity 0.71
Abstract

Tactile sensing is essential for robots in contact-rich tasks, yet many tactile sensors still provide sparse, low-dimensional signals that do not capture sufficient information for complex robotic perception and interaction. Vision-based tactile sensors (VBTSs) offer a powerful alternative by con-verting contact-induced deformation of a soft interface into im-ages. The image-based formulation gives VBTSs high-resolution, information-rich tactile observations that enable complex robotic tasks. This review surveys the full VBTS pipeline and treats sensing hardware, learning methods, simulation, and datasets as an integrated sensing-and-learning system. We 1) organize representative VBTSs into a hardware taxonomy structured by deformable elastomer design, sensor size and shape, and optical system design to guide future sensor development; 2) present a hierarchical view of learning-based tactile intelligence from low-level signal understanding to task-level policies and foundation models; and 3) examine simulation platforms and tactile datasets as a scaling layer, together with sim-to-real transfer and cross-sensor adaptation for training, benchmarking, and deployment. Finally, we identify open challenges and future directions for VBTSs in robotics. By providing a holistic view of how hardware, AI architectures, simulation, and datasets interact, this review aims to advance tactile intelligence for contact-rich robotic tasks.

0.40

Evaluating Tactile Foundation Models for End-to-End Imitation Learning in Contact-Rich Manipulation

cs.RO ·2026-10-31 ·Masaki Murooka, Ryoichi Nakajo, Tomohiro Motoda, Koshi Makihara, Hanbit Oh +2 more
publishedcode/data similarity 0.71
Abstract · Accepted for the 2027 IEEE/SICE International Symposium on System Integration (SII 2027)

Tactile sensing plays an important role in imitation learning for contact-rich manipulation by providing direct observations of physical contact with objects. Recently, several tactile foundation models (TFMs) have been proposed to learn general-purpose tactile representations through pretraining on large-scale tactile datasets. However, how these pretrained tactile representations should be leveraged for end-to-end imitation learning remains insufficiently explored. In this work, we integrate multiple TFMs into Diffusion Policy and systematically evaluate their effectiveness for contact-rich manipulation under common experimental settings. We further investigate adaptation strategies, including encoder fine-tuning and task-specific mid-training, to understand how pretrained tactile representations can be effectively used for downstream imitation learning. Through extensive evaluation across diverse manipulation tasks in both real-world and simulation environments, including more than 5,000 real-world policy rollouts, we provide empirical insights into the use of TFMs for end-to-end imitation learning. Project page: https://mmurooka.github.io/tfm4il-project-page/

0.29

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.70
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19

TaRL: Learning General and Physical Rewards from Tactile Demonstrations

cs.RO ·2026-09-29 ·Po-Yi Wu, Dao-Jan Chang, Shang-Ya Hsiao, Hong-Ming Chen, Yu-Cheng Su +1 more
code/data similarity 0.70
Abstract · 7 pages, 13 figures. Project page: https://embodiedai-ntu.github.io/tarl

Contact-rich manipulation requires robots to sequence precise contacts, maintain stable grasps, and apply directed forces. Reinforcement learning (RL) can acquire such behaviors automatically, but its performance hinges on reward design: sparse rewards reduce the learning efficiency, while dense rewards are hard to specify. Visual reward learning addresses this by inferring rewards from action-free demonstrations. Because it conditions only on visual observations, it fails to capture rewards beyond visual goals. We propose Tactile Reward Learning (TaRL), a framework that learns rewards from tactile demonstrations. TaRL takes a sequence of tactile deformation maps as input, and regresses task-completion progress from both successful and failed demonstrations. Because TaRL captures local robot-object interaction, it provides informative feedback to learn firm grasps and correctly directed forces; meanwhile, it is robust to changes in scene layout such as object position. We evaluate TaRL on four manipulation tasks in simulation and two in the real world. Used as a shaping reward, it substantially improves both sample efficiency and final success rate, raising success on Nut threading from 34% to 56% in simulation and on cube pickup from 37% to 97% in the real world. Combining tactile with visual rewards improves performance further. TaRL also generalizes across object instances: trained on box placement and directly deployed to can placement, it significantly improves policy learning on the new task. Project page is available at https://embodiedai-ntu.github.io/tarl.

0.30

Tactile-Guided Robot Learning: From Representation Learning to Foundation Models

cs.RO ·2026-10-14 ·Kiyanoush Nazari, Luchen Li, Haoshu Fang, Nima Fazeli, Zhibin Li +2 more
similarity 0.69
Abstract

Tactile sensing is becoming central to robust, adaptive, and dexterous robotic manipulation. Beyond its traditional role in contact detection and reactive control, touch is increasingly used to learn transferable representations, condition manipulation policies, and support embodied physical reasoning. Yet existing surveys largely emphasize tactile hardware and perception, leaving the rapid shift toward learning-based tactile manipulation insufficiently synthesized. This paper reviews tactile-guided skill learning from a learning-centric perspective, organized by the functional role of touch across the learning and control pipeline. We examine tactile representation and policy learning, tactile foundation models, predictive and adaptive control, and generalization across objects, tasks, sensors, embodiments, and simulation-to-real transfer. Across these directions, we identify common design principles and remaining challenges in learning transferable physical representations, integrating semantic reasoning with contact-level control, and scaling tactile learning across heterogeneous data and hardware. Finally, we outline emerging directions toward tactile foundation and world models that can predict, reason about, and adapt physical interactions. Together, this review characterizes the transition of touch from a task-specific feedback signal toward a core modality for general-purpose embodied intelligence. An accompanying database of the reviewed literature and associated resources is available at https://sites.google.com/view/touch-in-robot-learning-review.

0.44

OpenTac: An Open Ecosystem for Customizable, Scalable, and Transferable 3D Tactile Sensing

cs.RO eess.SPeess.SY ·2026-10-22 ·Ariel Slepyan, Geeta Chandra Raju Bethala, Jiafeng Gu, Anagha Rajendra Dangle, Yinzhe Zhou +10 more
code/data similarity 0.69
Abstract · 15 pages, 15 figures. Project website, open-source hardware and software, and demonstration videos: https://opentac.github.io

We present OpenTac, a novel sensor and a full-stack ecosystem for tactile skins that are highly customizable, scalable, and readily deployed in downstream robot control and learning applications. Our core contribution is twofold. First, we develop a scalable resistive tactile skin with a structured deformable overlay that converts tangential loading into spatially varying pressure. Differential responses across neighboring "taxels" support decoding of local shear vectors, and the common-mode response encodes normal force. Second, we provide a highly customizable sensor design tool that is able to automatically generate fabrication files for these tactile skins from 2D outlines and developable 3D surfaces, including from abstract descriptions such as text. We develop an ecosystem around the OpenTac sensor, including the CAD design tool, a sensor simulator, cross-sensor transfer, and fast/adaptive data acquisition. We demonstrate the broad applicability of the OpenTac-CAD sensor design tool by designing and fabricating more than 30 sensors across a variety of robot embodiments. We characterize the three-dimensional tactile fields produced by OpenTac with a commercial, high-precision force/torque sensor. We demonstrate the broad applicability of 3D tactile sensing across contact-rich feedback control and manipulation policy learning on four real-world robot embodiments. Additionally, adaptive acquisition enables kilohertz-rate partial readouts, and our readout circuitry enables high dynamic range (HDR) acquisition, measuring, for example, a 3.7 kg weight stack and a 20 g weight on the same sensor in the same frame. We provide all hardware, software, and result videos at opentac.github.io

0.21

Self-Supervised Anchoring of Fingertip Sensing to Proprioception and Proactive Actions for Robot Imitation Learning

cs.RO ·2026-09-24 ·Tomohiro Motoda, Masaki Murooka, Keisuke Shirai, Hanbit Oh, Ryoichi Nakajo +4 more
code/data similarity 0.69
Abstract · Project page is available at https://tomohiromotoda.github.io/nia.propra/

Robotic imitation learning often relies on external cameras, yet local interaction cues such as object proximity, contact onset, and grasp state are difficult to observe near the fingertips because of occlusion and limited temporal resolution. We study how to effectively incorporate complementary fingertip sensing into imitation learning using pressure-sensitive tactile and reflective proximity sensors, along with pretrained sensor encoders. The two modalities provide information at different manipulation phases: proximity sensing is informative before contact, whereas tactile sensing becomes informative after contact. However, naively adding these signals to a policy does not consistently improve performance and can even underperform vision-only policies, suggesting that sparse, phase-dependent sensor signals are difficult to exploit from limited demonstrations. We therefore propose a proprioception-anchored pretraining method, PROprioceptive-and-PRoactive Anchoring (PROPRA), which independently aligns each fingertip sensor history with proprioceptive and action segments. This provides a continuously available sensorimotor reference, allowing each sensor to be aligned independently during its informative phases. Experiments on real-world manipulation tasks show that our pretraining method improves average success rates over vision-only policies and image-anchored pretraining baselines. Representation analysis further shows that it preserves richer information about pre-contact states, enabling more effective use of complementary fingertip sensing. Please refer to our project page: https://tomohiromotoda.github.io/nia.propra/

0.32