CS Paper Radar

AGILE-GS: Anchor-Guided Fast Next-Best-View Selection for Active 3D Gaussian Splatting

Amirhossein Mollaei Khass, Nader Motee

cs.CV cs.RO ·submitted 2026-09-28 02:53 UTC · v1

Abstract

Radiance fields need hundreds of views, and their placement matters as much as their number. Next-best-view (NBV) selection for 3D Gaussian Splatting (3DGS) usually scores every candidate in the pool and keeps one. Searching for information and choosing a camera, however, are separable problems. We present AGILE-GS, an anchor-guided NBV method that separates the two. A virtual anchor pose is optimized on SE(3) by Riemannian gradient ascent on expected information gain. It need not be reachable or in the pool; it marks where the model is most uncertain. Candidates are scored against the anchor's viewing geometry, and a greedy ridge-leverage step distills the pool into a small, non-redundant shortlist without rendering any candidate. The shortlist can be used in two ways. AGILE-GS takes the first view on it as the next view, so no Fisher information is computed for any candidate. AGILE-GS+ computes the Fisher information gain of each shortlisted view and picks the best, so the expensive evaluation runs on a handful of views rather than the whole pool. On standard benchmarks and in closed-loop embodied acquisition, both match or exceed existing baselines while cutting selection latency by one to two orders of magnitude.

Closest papers

Nearest neighbours by meaning across the whole index.

LiTe-GS: Oracle-Efficient Next Best View Selection for 3D Gaussian Splatting

cs.CV cs.RO ·2026-09-24 ·Vivek Pandey, Amirhossein Mollaei Khass, Nader Motee
similarity 0.72
Abstract

Selecting informative camera views is critical for efficient training and adaptive refinement in 3D Gaussian Splatting, where each observation significantly influences model parameters. However, information-driven view-selection strategies can require repeated evaluations of expensive information-gain oracles as the number of candidate views increases. We propose LiTe-GS, an oracle-efficient method for next best view selection in 3D Gaussian Splatting. LiTe-GS reduces the number of information-oracle evaluations by performing randomized subset evaluation of candidate views rather than exhaustively scoring the full candidate pool. The resulting approach achieves expected $O(M\log(1/ε))$ oracle complexity with respect to the number of candidate views $M$, independent of the selection cardinality $K$, while providing an explicit trade-off between oracle efficiency and approximation quality through $ε$. We provide theoretical guarantees on oracle complexity and approximation performance under the proposed selection scheme. Experiments on Blender and Mip-NeRF 360 demonstrate that LiTe-GS maintains reconstruction quality comparable to Fisher-information-based baselines while substantially reducing the number of Fisher-oracle evaluations across different acquisition settings.

0.11

GS-VLA: Plug-and-Play Viewpoint Canonicalization for Frozen VLA Policies via Gaussian Splatting

cs.CV cs.AI ·2026-08-19 ·Yechan Park, HyunJin Kim
benchmark similarity 0.63
Abstract

This paper proposes a lightweight, plug-and-play framework that improves robustness to viewpoint shifts in Vision-Language-Action (VLA) policies without policy retraining. To our knowledge, this is the first approach to directly leverage 3D Gaussian-based novel-view synthesis for observation-space adaptation in VLA policies. Current VLA performance relies on the implicit assumption that training and deployment camera configurations are identical. Our experiments show that even a small displacement of the camera mount can reduce the success rate on the LIBERO benchmark from about 90% to about 10% in the worst case. Prior approaches, such as large-scale fine-tuning or generative data augmentation, are computationally expensive and risk catastrophic forgetting. To address this, viewpoint shifts are reformulated as a localized novel-view synthesis problem. Under a Locality assumption, that camera perturbations remain within a small bounded region relative to the workspace, viewpoint normalization reduces to a scene- and policy-independent disocclusion task. Our work implements this idea with a 4M-parameter 3D-Gaussian canonicalizer prepended to a frozen VLA policy. Without modifying policy weights, GS-VLA improves performance across three orthogonal axes: (1) Policy architectures, (2) Unseen task suites, and (3) Perturbation scales. These results show that a lightweight visual module can recover a large fraction of the performance lost under viewpoint shift, without policy retraining.

0.40

When pose graphs are not enough: a failure analysis of pose-graph-based camera estimation for Gaussian splatting

cs.RO eess.IV ·2026-10-08 ·Senthil Palanisamy, Azwad Sabik, Alan Dolhasz, Mira Slavcheva
similarity 0.63
Abstract

Exterior Gaussian-splat twins for real-estate listings are captured to a fixed recipe: a consumer drone orbits a single property in several overlapping passes at stepped altitudes, with occasional vertical ascents, so the imagery is dense, sequential, GPS- and time-tagged, and revisits each facade from many angles. This structure is tantalizing: it suggests camera poses could be recovered by a dense pose-graph optimization (PGO) whose only unknowns are the poses, far fewer than the joint pose-and-point problem bundle adjustment (BA) solves. PGO is mature in robotics, but almost always as post-processing: it redistributes the drift of an already-decent trajectory once loop closures tie it together. Splatting captures push that regime to its limit, every frame closing loops with dozens of others, raising a clean question: does pose-only optimization reach BA accuracy? We built a system specialized to this capture structure, not a general-purpose SfM tool, to test it. It beat COLMAP on speed but never on quality; this paper is the candid post-mortem. The shortfall arises from several interacting causes, hand-set weights, greedy merging and a noisy GPS ruler, together with two limits inherent to the formulation: SE(3) edges carry no scale degree of freedom, so independently scaled sub-maps drift when merged, and a two-view edge stops short of the coupling one 3D point imposes on every frame that sees it. A viable design must add back Sim(3) constraints, absolute GPS priors, retained structure, and uncertainty-aware weighting

0.21

CrossPressor: Scalable Cross-View Fusion for Feed-Forward 3D Gaussian Splatting

cs.CV ·2026-11-04 ·Yuxi Hu, Wenhao Dong, Jun Zhang, Friedrich Fraundorfer
publishedcode/data similarity 0.62
Abstract · Accepted to WACV 2027

Feed-forward 3D Gaussian Splatting (3D-GS) becomes increasingly difficult to scale to long multi-view sequences. Anchor-based compression methods such as ZPressor alleviate representation growth by decoding Gaussians only from a compact set of anchor feature maps, but keeping these anchors fixed forces each one to aggregate an increasing number of support views. We identify this representation--fusion mismatch and introduce \textbf{CrossPressor}, a training-free method for scalable anchor-based fusion. CrossPressor preserves all decoder-facing anchor queries while constraining the view-growing support sequence through coverage-cycled evidence routing, distributing retained spatial evidence across support views and fusion layers while keeping all support views represented. Routing before K/V projection, together with joint context packing, further reduces support-side fusion cost without retraining. CrossPressor maintains reconstruction quality close to dense fusion while achieving up to $26.12\times$ faster cross-view fusion and $1.43\times$ end-to-end acceleration on long input sequences. Our project page is at: https://yuhsihu.github.io/CrossPressor.

0.47

A Gaussian Primitive Data Management Framework for Efficient 3DGS Trajectory Rendering

cs.DB cs.CVcs.GR ·2026-11-16 ·Haolun Ma, Ziyi Liu, Zizhuo Xu, Chuhan Hu, Lei Li
similarity 0.62
Abstract

Trajectory rendering, which renders novel views of a reconstructed 3D scene along a camera path, is a core operation in digital twins and autonomous inspection. Structured 3D Gaussian Splatting (3DGS) renders a single view in real time by decoding sparse anchors into Gaussians on demand, but it renders a trajectory view by view: every view projects all anchors to select them, re-decodes anchors already requested by neighboring views, and runs all steps on the GPU while the CPU idles. We treat this as a spatial data management problem, where anchors are spatial objects, views are range queries, and decoded Gaussians are shared derived data, and propose GDM-GS, which removes redundancy at three levels. Within a view, an anchor index and an occluder index answer each view as a holed-frustum range query, so out-of-view and provably hidden anchors are never decoded. Across views, shared materialization decodes each requested anchor once per group of consecutive views while preserving each view's selection. Across processors, a hybrid pipeline balances selections between the CPU and the GPU before grouped decoding under bounded memory. Experiments on large-scale public scenes show that GDM-GS substantially reduces trajectory rendering latency while preserving image quality.

0.17

Seed2GS: Camera-Free, Training-Free Object Extraction from 3D Gaussian Scenes via a Single Reference-View Grounding

cs.CV ·2026-08-12 ·Zongjian Ding, Yudong Gao, Jiale Liu, Xinglin Yu, Junxing Ren +5 more
similarity 0.62
Abstract

Extracting a target object from a pre-built 3D Gaussian Splatting (3DGS) scene enables interactive 3D editing. Existing methods either train for tens of minutes per scene, sacrifice accuracy, or require original reconstruction cameras that pre-built assets may not include. We present Seed2GS, which achieves the highest reported LERF-MASK accuracy without original reconstruction cameras or scene-specific representation training. Its key insight is to separate target identity from 3D coverage. QD-SAM3 selects one reliable reference mask from several open-vocabulary candidates, fixing identity once. Seed lift and visibility-adaptive virtual orbits then expose the object from new viewpoints, while tracking propagates the seed without repeated detection. Because the scene remains frozen, these masks supervise only one temporary foreground logit per Gaussian. On LERF-MASK, Seed2GS reaches 92.1% mean intersection over union (mIoU) with a measured compute-only latency of 9.3 seconds, 3.7 points above the strongest scene-trained baseline and 7.6 points above the closest camera-free baseline. With one fixed test reference per scene, the complete pipeline retains 91.1% mIoU; replacing its predicted seed with a ground-truth mask improves mIoU by only 0.72 points. On 3D-OVS, Seed2GS reaches 95.7% mIoU.

0.04

SplatGuide: Geometric Priors from 3D Gaussians for Pose-Free Novel View Synthesis

cs.CV ·2026-08-17 ·Yejun Zhang, Zihan Wang, Xu Ji, Yihao Wang, Yuxin Hou +6 more
similarity 0.62
Abstract

Generating photorealistic novel views from unposed images requires both 3D geometric understanding and the ability to synthesize unseen content. A natural strategy combines feed-forward 3DGS reconstruction with multi-view diffusion. Yet prior pipelines extract at most one signal from the reconstruction, either pixel rendering or learned features, while none exploits per-Gaussian visibility for occlusion-aware reference selection. This *information disconnect* leaves renderable geometry, visibility cues, and learned features unused. SplatGuide closes this disconnect by reusing a single 3DGS scene across three complementary roles. Rendered images provide pixel-aligned geometric conditioning. Per-Gaussian source-view indices are rendered into a target-view voting map for occlusion-aware reference selection. Reconstruction tokens supply feature-level guidance via cross-attention. All three signals derive from the same reconstruction forward pass. Across RealEstate10K, DL3DV, Tanks-and-Temples, and Mip-NeRF 360, SplatGuide achieves state-of-the-art pose-free novel view synthesis. On RealEstate10K, with a moderate number of input views, it surpasses the ground-truth-pose baseline.

0.19

Scal3R: Learning Efficient Multi-Relative Pose Query for Scalable Online 3D Reconstruction

cs.CV ·2026-09-03 ·Chin-Yang Lin, Yang-Che Sun, Cheng Sun, Fu-En Yang, Min-Hung Chen +3 more
publishedcode/data similarity 0.61
Abstract · ECCV 2026. Project page: https://linjohnss.github.io/scal3r/

Online 3D reconstruction models perform poorly on long videos. This happens because regressing poses relative to a fixed first-frame anchor forces extrapolation far beyond the training distribution. Small drifts accumulate and amplify into significant geometric collapse. However, we observe that per-frame depth remains stable throughout this failure. The backbone's local geometry remains intact; only the global pose head breaks down. Motivated by this decoupling, we introduce Scal3R. This approach reformulates online reconstruction as multi-reference relative pose querying. We use lightweight learnable tokens, which make up about ~1% of the parameters, and inject them into a completely frozen backbone via asymmetric attention. This setup queries poses relative to multiple past keyframes. An online pose-graph optimization system with loop closure suppresses long-range drift. Scal3R reaches convergence in 8 hours on a single GPU. It reduces the average ATE by over 60% on KITTI compared to the online baseline. It also achieves state-of-the-art performance across Virtual KITTI, Sintel, TUM-Dynamic, ScanNet, and 7-Scenes. Project page: https://linjohnss.github.io/scal3r/

0.62