CS Paper Radar

Triangular Resampling for Long-Horizon Motion Generation

Kunhang Li, Yiyi Cai, Xiangyue Zhang, Fangyuan Tu, Yuhan Wu, Zhixiang Wang, Kaipeng Zhang, Haiyang Liu

cs.CV cs.AI ·submitted 2026-09-28 09:16 UTC · v2

Abstract

We introduce Triangular Resampling (TR), a post-training method for mitigating long-horizon error accumulation in motion diffusion models. Built on FloodDiffusion's triangular denoising schedule, TR addresses the mismatch between ground-truth-derived training windows and model-generated inference states. Replacing only completed motion history leaves this mismatch unresolved in partially denoised states within the active window. TR therefore extends rollout-based training to these states, using ground-truth clamping to limit excessive drift. For each replayed sample, TR draws one denoising threshold, shared across latent positions and replay updates, and replays multi-step triangular denoising without gradient tracking. After each update, states below the threshold are replaced with noise-matched ground truth, while those at or above it retain model predictions. The resulting latent window enters the standard training update. This rollout construction supports both supervised training (TR) and distribution matching (TR-DMD). On 120-second motion generation from HumanML3D test prompts, TR and TR-DMD achieve state-of-the-art FID AUC within their respective non-DMD and DMD comparison groups. Supervised TR reduces FID AUC by 40.9% and FID degradation slope by 55.3% relative to matched post-training without replay.

Closest papers

Nearest neighbours by meaning across the whole index.

Parasitic Co-Denoising: Unlocking 3D Human Motion Generation in a Frozen Video Diffusion Model

cs.CV ·2026-10-02 ·Yunjiao Zhou, Junlang Qian, Lihua Xie, Jianfei Yang
similarity 0.71
Abstract

Despite never being supervised on explicit 3D motion, large-scale text-to-video diffusion models synthesize realistic human motion in their generated videos. We ask whether this implicit knowledge can be turned into explicit 3D motion generation, without training a separate motion model. Probing a frozen Wan2.1 reveals that a recoverable motion signal is present in its intermediate states across the entire denoising schedule, not confined to the clean output. Motivated by this, we introduce parasitic co-denoising, a paradigm in which motion is decoded from the host model along its denoising schedule rather than produced by an independent generator. We instantiate it as the Parasitic Motion Decoder (PMD), an efficient flow-matching decoder that shares the host's noise schedule and reads its intermediate features through a $σ$-adaptive multi-layer fusion, leaving the host unmodified. Drawing its coverage from the host rather than from motion data, PMD leads dedicated motion generators on text-motion alignment at a small fraction of their trainable parameters, while producing paired video and motion in a single pass that motion-only baselines cannot match.

0.22

VLA-Rolling: Fewer Denoising Steps, Better Control via Adaptive Action Reuse

cs.AI cs.RO ·2026-10-18 ·Sicheng He, Yi Pan, Qiuting Yu, Jiaming Huang, Qi Lu +8 more
benchmark similarity 0.67
Abstract

Flow-matching vision-language-action (VLA) models generate an action chunk by iteratively denoising Gaussian noise, but typically execute only a short prefix before replanning with updated observations. Under this receding-horizon paradigm, the unexecuted remainder---the action tail---is discarded, and the next chunk is regenerated from fresh noise. We show that this discarded tail retains transferable denoising progress: action-tail initialization can match or outperform a native 10-step Gaussian baseline using fewer denoising steps. However, the optimal denoising budget varies substantially across samples, indicating that tail reuse should be adapted to the updated environment. Based on this observation, we introduce VLA-Rolling, a lightweight inference framework that reuses action tails through three stages: action-tail inheritance, per-action confidence estimation, and confidence-guided refinement through renoising and denoising budget allocation, while the underlying VLA remains frozen. Across $π_{0.5}$, SmolVLA, X-VLA, and MolmoAct2 on LIBERO, MetaWorld, LIBERO-Plus, and RoboTwin 2.0, VLA-Rolling reduces action-chunk inference cost in all 16 model--benchmark pairs, achieving up to a $1.48\times$ speedup, while improving success rate in 14 pairs by up to $15.08$ percentage points. These results show that action tails are not merely discarded predictions, but reusable intermediate states that enable more efficient and accurate VLA inference. These results demonstrate that the action tail can support the generation of better actions with fewer denoising steps. Our project is available at https://chenbao123ww.github.io/VLA-Rolling/.

0.26

FloodDiffusion 2: Efficient and Path Controllable Streaming Motion Generation

cs.CV ·2026-09-27 ·Yiyi Cai, Yuhan Wu, Kunhang Li, Tu Fangyuan, Xiangyue Zhang +4 more
code/data similarity 0.67
Abstract · 27 pages. Updated author affiliations and corresponding-author information. Code: https://github.com/AlayaLab/FloodDiffusion2

We present FloodDiffusion 2 (FD2), an efficient and controllable framework that builds upon FloodDiffusion (FD1), a state-of-the-art streaming motion generation model. While FD1 produces plausible motion, it suffers from low efficiency and limited controllability, as its attention design requires repeated computation over the entire history, and it lacks precise trajectory control for real-world applications. To address these limitations and improve generation quality, FD2 introduces three advances. First, Partial Attention makes finalized history representations independent of the active window, enabling KV-cached inference and shared-history packing for efficient training. Second, we establish a necessary-and-sufficient Bregman criterion for regression losses to preserve diffusion's conditional-mean velocity field. This criterion guides an FK-induced quadratic loss that incorporates motion geometry without online FK evaluation. Third, FD2 introduces precise path conditioning to control the character's root trajectory while preserving natural body motion. Experiments show that FD2 reduces training computation by 4.6$\times$ and accelerates denoising by 11.29$\times$, reaching 2.303 ms per update on long sequences. Alongside these efficiency gains, FD2 improves motion quality over FD1 and achieves state-of-the-art FID scores among streaming methods, with 0.048 on SEED and 0.053 on HumanML3D.

0.45

PoSTCache: From Forecasting to Postdictive Smoothing for Revisable Diffusion Caching

cs.CV ·2026-10-19 ·Liwei Lan, Hui Chen, Jungong Han, Guiguang Ding
similarity 0.66
Abstract · 37 pages, 13 figures

Diffusion and flow matching models achieve impressive visual generation quality but remain computationally expensive due to iterative sampling. Caching-based acceleration provides a practical training-free solution by reusing or predicting intermediate features. However, existing methods largely enforce a forward-only information flow: approximations produced for skipped model evaluations are immediately committed to the sampling trajectory and cannot benefit from feedback generated by later full-computation steps. We propose \textbf{PoSTCache} (\emph{Postdictive Smoothing Trajectory Cache}), a training-free and plug-and-play framework that reformulates diffusion caching as revisable trajectory inference. PoSTCache first uses an existing caching strategy to construct forward proposals for skipped steps. At a later full-computation step, the discrepancy between the refreshed prediction and its forward proposal yields a correction signal, which PoSTCache propagates backward to refine and reintegrate the preceding predictions. Viewing full-computation steps as sources of corrective feedback also changes how they should be selected. We therefore introduce the Posterior Variance Reduction (PVR) strategy, which estimates cross-timestep dependencies from offline denoising trajectories and selects anchors according to their expected reduction in surrogate trajectory uncertainty rather than local approximation error alone. Experiments on representative image and video generation models show that PoSTCache consistently improves the quality--efficiency trade-off over representative caching methods.

0.16

World2Motion: Turning Video World Models into 3D Human Motion Generators

cs.CV ·2026-09-29 ·Fangyuan Tu, Xiangyue Zhang, Yiyi Cai, Yichen Peng, Kunhang Li +6 more
benchmarkdatasetcode/data similarity 0.66
Abstract · 15 pages, 6 figures

We present World2Motion, a framework that generates scene-aware 3D human motion and corresponding video from a single image and a text prompt. While existing 3D motion generators learn from motion datasets, their generalization is constrained by limited coverage of environments. In contrast, video world models such as Cosmos 3 offer broader environmental priors but are not designed for full-body motion generation; recovering motion from their generated videos requires costly two-stage inference. To address these, we turn Cosmos 3 into a single-stage 3D motion generator. This adaptation has two challenges: the scarcity of paired video--motion data and temporal instability in the generated motion. First, we construct a training dataset combining synthetic video--motion pairs with real videos paired with estimated 3D motion. Second, we propose a shift-decoupled noise schedule that assigns different noise levels to video and motion through shared denoising progress. This design accommodates the different denoising requirements of the two modalities, reducing motion jitter. Experiments on a multi-source interaction benchmark show that World2Motion has better motion--text alignment and scene interaction compared with the evaluated 3D motion generators. It also matches the interaction success rate of the two-stage baseline while achieving approximately 3.3$\times$ faster inference. Our project page is available at https://fyantu.github.io/World2Motion/.

0.37

Correction Training for Diffusion Models

cs.AI ·2026-10-09 ·Donghoon Ahn, Runqian Wang, Alexei A. Efros, Taesung Park, Yash Belhe
code/datacommunity pick similarity 0.66
Abstract · Project page: https://sunovivid.github.io/correction-training/ Code: https://github.com/sunovivid/correction-training

Iterative sampling in diffusion models can lead to error accumulation due to exposure bias. The denoiser is trained on real images interpolated with noise, but at inference its inputs are constructed from its own imperfect predictions from the earlier steps, something it has never seen at training time. This might be one reason diffusion models often struggle without additional help, such as CFG. We introduce a correction step for diffusion models which attempts to reduce this training-inference gap. The corrector takes the base model's prediction as input and is trained against the same ground-truth target. This makes correction an explicit learning task, with training inputs provided by the base model. During sampling, at each denoising step, we iteratively refine the denoiser's clean-sample prediction. This allows us to correct predictions at intermediate denoising steps, preventing early artifacts from persisting into the final sample. Although the corrector is trained only on predictions from the base denoiser, it can be applied repeatedly to its own outputs at inference for better results. This simple framework leads to substantial improvement in sample quality while largely preserving diversity. We evaluate our method across DiT, SiT, and JiT. Our method substantially improves upon previously reported FID scores for unguided generation and, notably, unconditional generation, where producing high-quality samples without guidance has been particularly challenging. Our method achieves performance competitive with classifier-free guidance (CFG), and combining correction with CFG further improves diversity and reduces oversaturation typical of CFG. Finally, we show that the additional inference cost of correction can be amortized by distilling the refined predictions back into the base diffusion model, retaining the quality gains without additional inference-time overhead.

0.33

Efficient World Action Model Inference with Adaptive Intermediate States

cs.RO cs.AI ·2026-09-28 ·Zhinnan Liu, Haozhi Han, Ruge Zhang, Teng Ma, Tao Ma +6 more
similarity 0.65
Abstract

World Action Models (WAMs) enable future-aware control by jointly modeling actions and environment dynamics. However, iterative diffusion or flow inference incurs substantial denoising latency. Prior inference state offers a natural opportunity for acceleration, yet changing planning contexts, observations, and intermediate representations can quickly render retained state stale. Preserving useful computation therefore requires adapting inference state rather than reusing it as-is. To this end, we present $\mathrm{WAM}{\scriptstyle\mathrm{ACHINE}}$, a training-free framework that accelerates WAM inference by preserving and adapting inference state for efficient and accurate continuation as the control loop evolves. Across closed-loop replans, Trajectory Remapping remaps replan state from the preceding replan to initialize the next replan, reducing redundant trajectory generation. Across denoising steps, Observation Rebinding performs anticipatory inference during action execution and rebinds retained denoising state to the real observation for continuation when consistency checks pass, reducing latency exposed to the control loop. Across Transformer layers, Residual Rescaling selectively rescales retained layer state and refreshes it through full computation of the middle layers when probe checks fail, reducing repeated Transformer computation. Evaluations of three representative WAM architectures on LIBERO and RoboTwin 2.0 show that $\mathrm{WAM}{\scriptstyle\mathrm{ACHINE}}$ achieves 1.47-3.05$\times$ speedups in observation-to-action latency and 2.23-3.27$\times$ speedups in GPU inference time per replan, while preserving 96.69-99.54% of native WAM task success.

0.49

TACD: Distilling Efficient Text-to-Motion Models via Terminal Amplification Control

cs.AI ·2026-10-02 ·Wei-Jin Huang, Yuan-Ming Li, Kun-Yu Lin, Wang Luo, Yinlin Zhu +6 more
code/datahot direction similarity 0.65
Abstract

Recent text-to-motion models have improved motion quality and instruction following, yet many-step denoising and large model components make deployment slow and memory-intensive. We present Terminal-Amplification-Controlled Distillation (TACD), an on-policy approach for training efficient motion generators from text prompts and pretrained teachers, without real-motion training data. Building on segmented on-policy flow distillation, we supervise clean-motion predictions along student-generated trajectories. We identify a failure mode in which velocity matching on a fixed supervision grid repeatedly overweights errors near the denoising endpoint, degrading few-step generation. TACD ties the latest teacher query to the student's step size, bounding the effective loss weights in clean-motion space without changing inference. Experiments on HumanML3D and KIT-ML demonstrate improved few-step generation, including a 58% reduction in eight-step HY-Motion student FID relative to distillation without this bound. For diffusion teachers, the endpoint-matching form of TACD yields four-step students with lower FID and matched or improved text-motion retrieval relative to their 50-step teachers on HumanML3D. On HY-Motion and Kimodo, eight-step students with compact components achieve 7.7-11.9x end-to-end speedups and reduce peak GPU memory by 3.8-6.7x relative to their teachers. Project page: https://vkgo.github.io/TACD/

0.34