CS Paper Radar

Automated Feature Engineering, AutoML, and Decision-Focused Learning for Improved Energy Consumption Forecasting

Nasser Alkhulaifi

cs.AI ·submitted 2026-09-28 12:14 UTC · v2

Abstract

The rising cost and demand for energy, together with environmental sustainability goals, create major challenges for energy management. Energy Consumption Forecasting (ECF) supports planning by predicting future consumption, but Machine Learning (ML) models for ECF often depend on expert-driven Feature Engineering (FE). This thesis addresses that dependence through three contributions. First, it establishes and evaluates a comprehensive FE pipeline for ECF and investigates domain-specific features. Second, it introduces AutoEnergy, a domain-tailored automated FE algorithm that generates interpretable features from timestamps and lagged consumption and integrates with AutoML for end-to-end ECF modelling. Across eighteen real-world energy datasets spanning residential, commercial, industrial, renewable, and grid domains, AutoEnergy reduces forecasting error by 19.52%-84.72% relative to baseline AutoML and established automated FE methods, while running 1.31-4.41 times faster, with gains varying by dataset. Third, AutoEnergy is integrated with Decision-Focused Learning (DFL) for a Battery Energy Storage System problem, jointly forecasting electricity prices and demand while optimising charging and discharging decisions. On a real-world UK property dataset, this approach reduces operating costs by 22.9%-56.5% compared with the same DFL models without automated FE. Overall, the results show that domain-specific automated FE can reduce reliance on manual feature design, improve forecasting accuracy, and translate predictive gains into measurable operational benefits in energy management.

Comment
PhD thesis, School of Computer Science, University of Nottingha, United Kingdom

Closest papers

Nearest neighbours by meaning across the whole index.

The Utility of Physics-Informed Machine Learning in Solar Power Production Forecasting

cs.LG ·2026-10-28 ·Peter Pavlík, Franz M. Rohrhofer, Bernhard C. Geiger
similarity 0.67
Abstract · Submitted to Solar Energy

Physics-informed machine learning (PIML) and hybrid modeling have attracted significant attention as approaches for combining physical knowledge with the flexibility of deep learning. In this work, we investigate whether these approaches deliver their commonly claimed benefits for large-scale photovoltaic (PV) power forecasting. We develop two hybrid forecasting architectures that integrate the ADR physical PV efficiency model with the TSMixer neural forecasting architecture through feature augmentation and residual learning. The proposed models are evaluated on a dataset comprising over 3 million samples from 3,713 PV installations across 33 European countries. We assess convergence speed, forecasting accuracy, transferability across geographical regions, and data efficiency. Although the physics-informed models seem to exhibit slightly faster convergence during training, they do not achieve consistent improvements in test-set accuracy, generalization, or performance under limited training data compared to the purely data-driven baseline. These findings suggest that, for modern deep forecasting architectures trained on large datasets, explicitly incorporating the ADR physical model provides limited practical benefit for day-ahead PV forecasting.

0.20

Learning Control Policies from Heterogeneous Multi-Horizon Time Series in Battery Energy Management Systems

eess.SY ·2026-09-18 ·Sheng Yin, Vivek Teja Tanjavooru, Holger Hesse, Christoph Goebel
published similarity 0.67
Abstract

This paper introduces Representation-to-Decision (R2D), an end-to-end imitation learning framework that maps heterogeneous multi-horizon time-series inputs directly to battery control decisions through modular Temporal Feature Extractors (TFEs) and a shared latent representation, without an explicit load and PV forecasting step. While accurate forecasting improves prediction quality, optimal control performance remains unguaranteed in prediction-then-optimization pipelines; standard Reinforcement Learning (RL) lacks the long-horizon temporal awareness due to short-window observations, even when forecast signals are available as additional inputs. R2D offers a different perspective: rather than forecasting first and deciding second, it learns to decide directly from raw temporal inputs, with control optimality anchored by an aging-aware Mixed-Integer Linear Programming (MILP) expert through Behavior Cloning (BC). Benchmarked against six controllers on a high-fidelity electro-thermal battery simulation across five industrial sites, R2D achieves 62--77\% of the global clairvoyant optimum, outperforms the tested Model Predictive Control (MPC) and RL benchmarks, and yields battery degradation nearly identical to its MILP teacher across all five sites. Comprehensive ablation studies over temporal backbone, model size, expert formulation, aging-cost weighting, and horizon configuration confirm that an LSTM encoder with a 15-minute single-step control horizon provides the most robust and deployment-ready configuration, and cross-site and single-factor out-of-distribution tests show that generalization to unseen profiles is profile-dependent, with policies trained on high-activity sites transferring most reliably.

0.26

Medium-Term Multi-Resolution Electric Load Forecasting using Economic Data and Foundation Model

cs.LG ·2026-09-25 ·Lindas Eloi, Goude Yannig, Ciais Philippe
similarity 0.67
Abstract

Accurate medium-term, from a few months to a few years, electricity load forecasts are crucial for informed decision-making in power plant maintenance scheduling, load dispatch and price settlement. Being comprised between Long-Term Load Forecasting (LTLF) which uses mostly economic projections and appliances development scenarios, and Short-Term Load Forecasting (STLF) driven by weather, calendar and autoregressive patterns, Medium-Term Load Forecasting (MTLF) requires both extrapolation capabilities and variability modeling. Yet, it remains unclear if MTLF can benefit from economic indicators, and especially at which forecast horizon and resolution. To address these challenges we investigated the impact of socioeconomic data on predictions issued 1 month and up to 48 months in advance for France at monthly and daily resolution using a tabular Foundation Model (FM). A dataset covering 20 years of observations of electricity load, weather variables and economic features such as consumer price and production indices, electric vehicle counts or employment is created for the study. To avoid noisy data, we used a new feature selection pipeline, creating ensemble of expert models with diverse feature subsets, to demonstrate that selected economic covariates improve forecast skill by 20% over 2015-2025. This enhancement is steady across lead times and resolutions limiting the Mean Absolute Percentage Error to 4% for monthly granularity and 5% for daily granularity. Explainability of the models is investigated through feature and context importance. Results showed that the FM is limited in the context it leverages pointing towards potential computational savings with a reduced context, while feature importance of economic predictors grows with the forecast horizon. This suggests that including economic data in MTLF could bridge the gap with LTLF leading to seamless forecasts.

0.18

Decision-Focused Learning for Optimal Battery Scheduling Under Load and Photovoltaic Power Uncertainty in Microgrids

eess.SY ·2026-10-10 ·Marios Saleptsis, Antoine Lesage-Landry, Marco Mussetta, Sonia Leva
similarity 0.67
Abstract · 20 pages, 13 figures, submitted to Sustainable Energy, Grids and Networks

The increasing penetration of renewable energy sources in microgrids demands accurate day-ahead forecasting to support optimal battery energy storage system (BESS) scheduling. Yet the conventional predict-then-optimize paradigm trains forecasters on statistical accuracy metrics that are agnostic to the asymmetric and time-varying cost impacts of forecast errors. This work proposes a decision-focused learning (DFL) framework that trains gated recurrent unit forecasters for both load demand and photovoltaic generation directly on the downstream operational cost of a two-stage energy management system, where day-ahead BESS commitments are fixed prior to real-time balancing. Gradients are backpropagated from the real-time operational cost through both optimization stages to the forecaster weights via implicit differentiation, enabling the forecasters to internalize the penalty structure of the scheduling problem. The framework is validated on the MG2Lab experimental microgrid testbed at Politecnico di Milano across two operational scenarios of increasing grid constraint and eight forecasting configurations comprising single-source and combined-forecaster settings. Results illustrate that the DFL-trained pipeline reduces operational cost by 3.78% under normal grid conditions and by 30.60% under grid-constrained conditions relative to the accuracy- optimized baseline, while nearly eliminating load shedding events. Notably, the DFL forecasters exhibit higher statistical errors than their accuracy-trained counterparts yet achieve consistently lower operational costs, confirming that forecast accuracy and decision quality do not share a monotonic relationship in constrained microgrid scheduling.

0.12

Frequency-Calibrated Decision-Focused Learning for BESS Dispatch Under Renewable Uncertainty

eess.SY ·2026-10-30 ·Zihan Meng, Chenxi Hu, Xin Cui, Francis Yunhe Hou
hot direction similarity 0.65
Abstract

Battery energy storage system (BESS) flexibility depends on state of charge and intertemporal operating constraints. Renewable forecast errors of similar magnitudes can lead to different BESS dispatch results. An error may alter early charging or discharging decisions and reduce the flexibility available for subsequent regulation, while another may have little effect on the resulting schedule. To account for these unequal consequences, this paper proposes Frequency-Calibrated Decision-Focused Learning (FC-DFL), which trains renewable predictors using the realized operating costs of their induced BESS schedules. Gaussian smoothing and solver-based zeroth-order estimation provide training feedback without requiring differentiating through the non-differentiable mixed-integer BESS dispatch problem. The same decision feedback is further combined with prediction sensitivity to develop a decision-oriented XAI method that identifies the input features and forecast periods most consequential to BESS operation. Case studies using German wind and solar data show that FC-DFL reduces the integrated absolute frequency-deviation metric by 6.05% and decision regret by 23.92% relative to accuracy-based predict-then-optimize method. The XAI analysis further demonstrates that the identified high-impact forecast periods produce 2.84 times larger average absolute changes in realized operating cost than low-impact periods. These findings highlight the importance of incorporating downstream decision-making outcomes into renewable forecasting and demonstrate the value of FC-DFL in improving BESS regulation and providing operationally meaningful forecast explanations.

0.24

An Empirical Benchmark of Deep Time-Series Models for Smart Meter Energy Forecasting

cs.LG ·2026-08-19 ·Behnaz Kavoosighafi, Maria Eidenskog, Wiktoria Glad, Katerina Vrotsou
publishedbenchmarkcode/data similarity 0.64
Abstract

Accurate forecasting of energy consumption is important for the efficient operation of power systems, with direct implications for operational costs, energy management, and system maintenance. Due to the availability of extensive high-resolution consumption data from smart meters, data-driven methods have been used for short-term and long-term forecasting. However, their comparative performance on real-world smart meter data is still not well studied. In this paper, we present an empirical benchmark of nine modern deep learning models for time-series forecasting, including linear, MLP-based, convolutional, and Transformer architectures. We evaluate these models on two publicly available smart meter datasets. Our analysis focuses on three factors that strongly affect forecasting performance: the length of historical input, the prediction horizon, and the choice of model architecture. We show that extending the historical context improves accuracy, but only up to a saturation point, after which additional input provides limited benefit. In contrast, accuracy decreases as the prediction horizon increases. We also investigate the trade-off between prediction accuracy and computational complexity, and assess the statistical significance and practical magnitude of performance differences across models. Our results show that deep learning models consistently outperform classical baselines, while lightweight architectures achieve relatively similar performance at significantly lower computational cost. Additionally, architectural differences only become meaningful at longer forecasting horizons and on more heterogeneous datasets. Finally, a subgroup analysis across geodemographic and household categories shows that model choice has limited impact for most population segments.

0.59

Distributed JEPA: A Self-Supervised Framework for Energy Forecasting

cs.LG cs.AI ·2026-09-15 ·Liana Toderean, Tudor Cioara, Vasilis Michalakopoulos, Efstathios Sarantinopoulos, Ionut Anghel +1 more
hot direction similarity 0.64
Abstract

Traditional energy forecasting solutions rely on task-specific supervision and energy asset representations, limiting transferability and the ability to capture general temporal dynamics across heterogeneous assets. We address this by proposing a distributed Joint Embedding Predictive Architecture (JEPA) for self-supervised learning from heterogeneous energy time-series. The framework predicts latent representations of masked temporal segments while integrating temporal observations and contextual information within a shared embedding space. To prevent representation collapse, training combines a latent-space predictive objective with covariance and temporal variance regularization. The evaluation was conducted on energy consumption and generation datasets under data-degradation scenarios and compared with a Transformer forecasting baseline. The learned representations remained stable (cosine similarity $\approx 0.98$; effective rank 185-235). JEPA achieved performance comparable to a Transformer on building energy data, higher $R^2$ in 3/5 consumer clusters, and outperformed the baseline on 9/10 unseen PVs ($R^2$=0.73-0.88 vs. <0.45), while showing greater robustness to missing data.

0.28

Full-Feature versus Limited-Input Machine Learning for Residential Energy Estimation: A Comparative Analysis of RECS and ResStock Under Realistic Input Constraints

cs.LG ·2026-08-10 ·Aditya Ramnarayan, Fatih Evren, Patti Gunderson, Samuel Rosenberg
code/data similarity 0.63
Abstract

Residential energy estimates are often needed before detailed envelope characteristics, equipment efficiencies, infiltration, sensor, or billing data are available. This study quantifies the trade-off between predictive accuracy and input accessibility using two nationally representative U.S. residential-energy datasets: the survey-based Residential Energy Consumption Survey (RECS) and the simulation-based ResStock dataset. Full-feature models were first used to establish dataset-specific performance benchmarks. For total-energy estimation, the models were subsequently restricted to ten low-burden variables obtainable from occupants, administrative records, or location-based weather data without an on-site energy audit. Among CatBoost, XGBoost, LightGBM, Random Forest, and Neural Networks, CatBoost consistently achieved the highest predictive performance for the full-feature analysis, reaching R2 = 0.90 for ResStock and R2 = 0.73 for RECS. When the feature set was restricted to ten homeowner-accessible inputs to simulate realistic deployment conditions, model performance converged to R2 = 0.61 for RECS and R2 = 0.62 for ResStock, showing that algorithmic complexity cannot fully compensate for missing physical and behavioral information. However, for a more homogeneous ResStock cohort consisting of single-family detached, natural-gas-heated homes in Climate Zone 6A constructed between 2000 and 2010, a reduced-input model improved accuracy to R2 = 0.85, demonstrating the value of targeted modeling for homogeneous populations. The results indicate that tree-based ensemble models can serve as high-fidelity emulators of national-scale residential energy datasets. However, careful consideration of feature availability, dataset origin (empirical vs. synthetic), and applicable use cases are also important.

0.20