CS Paper Radar

X-Reset: Scaling Object-Centric Reinforcement Learning via Cross-Embodiment Resets

Prithwish Dan, Chenyang Ma, Wei Zhan

cs.LG cs.AIcs.RO ·submitted 2026-09-28 17:46 UTC · v1

Abstract

Reinforcement learning (RL) in simulation can train dexterous manipulation policies without robot demonstrations, but training a single generalist policy with task-agnostic rewards faces a severe exploration problem: approaching, grasping, and reorienting diverse objects with many degrees of freedom is difficult to discover from scratch. Prior works make exploration tractable with high-quality robot demonstrations, per-task reward shaping, or by restricting policies to narrow modes of behavior. We propose X-Reset, a framework that instead resolves exploration with human hand-object demonstrations. Rather than imitating or tracking retargeted human motion, X-Reset kinematically retargets hand-object states to noisy robot states, filters out states that are unstable in simulation, and samples the remainder as resets during RL training with general-purpose object-centric rewards. The resulting policy depends only on object state and goal, with demonstrations entering training through the reset distribution. We show that X-Reset trains generalist policies on 20 objects across three embodiments---a 22-DoF hand on two different arms and a parallel-jaw gripper---and resolves the exploration challenges of RL from scratch. X-Reset scales with the number of training objects, generalizes to unseen objects, can learn from imperfect hand-pose estimates, and transfers behaviors zero-shot from sim-to-real.

Closest papers

Nearest neighbours by meaning across the whole index.

Dex-One2Many: Learning Dexterous Manipulation from a Single Human Demonstration

cs.RO cs.CV ·2026-10-08 ·Jusuk Lee, Sungha Kim, Yeonsoo Park, Jonguk Cheon, Yoonkyo Jung +6 more
code/data similarity 0.79
Abstract · Project page: https://dex-one2many.github.io/

While learning dexterous manipulation from a single human video offers a promising alternative to costly robot demonstrations, many recent methods predominantly imitate demonstrated motions. Such strict motion matching often limits generalization to initial object poses, goal poses, and grasps not shown in the video. Alternatively, discovering a policy via reinforcement learning (RL) allows for broad generalization, but without prior guidance, it struggles with high-dimensional exploration in complex, multi-stage tasks. To address these coupled generalization and exploration challenges, we present Dex-One2Many, a real-to-sim-to-real framework that learns a generalizable dexterous manipulation policy from a single human video. Our key insight is to abstract the video into sequential scene graphs that guide RL, enabling efficient exploration while preserving broad generalizability. The graphs serve as generative constraints for sampling diverse reset states and provide dense rewards for each stage. Because the graphs constrain relations rather than exact poses, these reset states cover object poses and grasps beyond the video, while initializing each stage from them with dense rewards keeps exploration short and guided. Trained entirely in simulation, Dex-One2Many transfers zero-shot to a real multi-fingered hand. Across five tool-use and manipulation tasks, Dex-One2Many exceeds baselines by 6.5% in seen configurations, while its robust generalization widens this gap to 71% in unseen scenarios.

0.29

A Balanced Data Diet: Addressing the Exploration Bottleneck in Mega-Scale RL for Robot Control

cs.RO cs.LG ·2026-10-08 ·Octi Zhang, Mateo Guaman Castro, Patrick Yin, Ignacio Dagnino, Abhishek Gupta +2 more
highly cited similarity 0.77
Abstract · CoRL 2026. Project website: https://sgs-rl.github.io/

General-purpose robots must perform a wide range of tasks from agile locomotion to dexterous manipulation. While sim-to-real reinforcement learning (RL) has proven to be a useful tool for this goal, current RL pipelines depend on engineering-heavy, per-task structural priors such as shaped rewards and demonstrations. Recent work has shown that diverse simulator resets, combined with massively parallel simulation, can alleviate much of this engineering burden on several manipulation problems. However, we find that naively scaling this paradigm to more precise or dynamic problems remains non-trivial. While simulator resets can help with exploration, uniformly sampling over this distribution wastes a growing fraction of learning experience on task configurations the policy has already mastered or cannot yet attempt. This makes it challenging to see the expected benefits of scaling parallel environments for RL, since much of the learning signal in a batch is wasted during learning. To mitigate this, we introduce Success Guided Sampling (SGS), a simple adaptive sampler that concentrates RL training on task configurations around the frontier of the policy's capabilities. Doing so allows large-scale simulated RL to make the most out of the experience in a batch, enabling much more effective scaling to large-scale parallel simulation. Across experiments using up to $2^{20}$ (over one million) parallel environments, SGS enables RL to solve challenging multi-terrain quadruped locomotion and contact-rich assembly tasks that prior methods fail to solve. Finally, we distill the learned manipulation policies into RGB-based policies and demonstrate zero-shot transfer to several challenging assembly tasks on real hardware. Project website: https://sgs-rl.github.io/.

0.57

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.77
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

SimRetract: Zero-Shot Sim-to-Real Robotic Assistance for Retractor Take-Over in Open Surgery

cs.RO ·2026-10-28 ·Xucheng Wang, Zhizhou Yang, Sung Eun Kim, Romain Hardy, Michael P. Sampson +5 more
code/data similarity 0.76
Abstract

We demonstrate the first zero-shot sim-to-real transfer for a surgeon-robot collaboration task in open surgery: retractor take-over. A robot arm takes a retractor from the surgeon's hand and preserves retraction at handoff, using a policy trained only on simulated demonstrations, without human demonstrations or real-world fine-tuning. Imitation learning from real demonstrations is limited by collection and labeling costs, and by performance degradation when the environment changes. Our framework, SimRetract, generates simulated demonstrations designed for transfer: the policy observes masked instrument images and grasp geometry, learns to recover from off-nominal states, and acts with margin for execution drift. Deployed zero-shot, it grasps the retractor in 90% of 50 surgeon-defined phantom presentations and preserves retraction at handoff in 78%. Results on unseen retractors suggest potential for generalization to instruments with similar grasp geometry. Across ten policy configurations and 1,200 simulated and real trials, we localize the sim-to-real gap to components: in simulation, grasp rates across ablations span 80-96%, while on the real robot removing the instrument mask alone drops performance to 22% grasped and 12% held. Transfer-oriented design thus makes zero-shot sim-to-real transfer feasible for a surgical assistance task without human demonstrations. Code is available here: https://anonymous.4open.science/r/simretract-58D2.

0.29

Gen2Dex: Learning Dexterous Manipulation from Simulation-Initialized Generated Video Demonstrations

cs.RO ·2026-10-17 ·Xiaowen Qiu, Yian Wang, Haoxiang You, Chuang Gan
similarity 0.76
Abstract

Human video demonstrations provide rich manipulation strategies for dexterous manipulation learning. We study a setting in which a fully specified simulated scene is used to generate videos that specify the demonstrated manipulation behavior. This setup provides access to scene information such as object geometry, articulation, and camera parameters, while allowing direct control over task and scene configuration. However, generated videos may contain geometric distortions, inaccurate contacts, and other physical inconsistencies, making the recovered motion difficult to execute directly on a robot. We present an end-to-end framework for converting such simulation-grounded videos into physically executable dexterous robot demonstrations. Our perception pipeline leverages the known scene through model-based object tracking with dense foundation-model features and depth-based hand-object alignment. The recovered human motion is then retargeted and physically grounded using residual reinforcement learning, where a backward curriculum and a cache of physically valid reset states enable the policy to correct imperfect video-derived references while preserving the demonstrated manipulation strategy. On clean ARCTIC demonstrations, our method achieves competitive performance with prior dexterous retargeting approaches and shows greater robustness when applied to references extracted from generated videos. We further demonstrate diverse rigid and articulated manipulation tasks in simulation and successful open-loop transfer of the optimized trajectories to a real dexterous robot.

0.15

Scaling Online Exploration for Robot Agents

cs.RO ·2026-10-15 ·Runhan Huang, Xiangcheng Zhang, Haoyu Chen, Yitong Li, Yen-Jen Wang +15 more
code/datahighly cited similarity 0.76
Abstract · Project website is at https://robot-agent-exploration.com/

Robot learning has advanced by scaling demonstration datasets and model capacity; however, deploying a new robot embodiment or task typically necessitates a dedicated teleoperation corpus. The resulting policies remain bounded by their imitation distributions, limiting generalization and continual self-improvement. We introduce RAX (Robot Agent eXploration), an open-source framework for robot agents centered on scaling exploration: enabling agents to improve by acquiring online experience and synthesizing executable programs. In RAX, a general-purpose coding agent generates robot control code, operating without action demonstration data, hand-engineered action primitives, or value-function guidance. Through online exploration, the agent identifies decision sequences that achieve task goals and compiles them into modular programs encapsulating the full perception-planning-control loop. Using RAX, we present a systematic multi-embodiment study on scaling online exploration across precision and long-horizon manipulation tasks using single-arm, bimanual, dexterous, mobile, and humanoid systems in simulation and on real robots. Generalization performance on unseen environments improves consistently as exploration scales. In simulation, RAX outperforms top baseline models by +37.4% on average. On real robots, RAX autonomously learns memory-dependent, articulated, high-precision, deformable, and long-horizon mobile manipulation tasks without human demonstrations, continually improving performance by composing verified skills from prior exploration sessions. As exploration scales, we observe emergent capabilities including active perception, error recovery, safety guardrails, and human-robot collaboration. We open-source RAX as a generalist robot-agent platform in which new robot embodiments are integrated through their APIs alone, without teleoperated data collection or policy training.

0.49

FlashDexRetarget: Accelerating Dexterous Manipulation Data Generation through Multi-Motion Retargeting

cs.RO ·2026-10-01 ·Kyungmin Lee, Sibeen Kim, Dongyoon Hwang, Yoonsang Oh, Donghu Kim +4 more
benchmark similarity 0.76
Abstract

Human hand-object demonstrations provide a scalable source of data for dexterous robot learning, but transferring them across embodiments requires physically feasible retargeting. Existing physics-based methods typically optimize each demonstration independently, leading to either limited success under finite simulation budgets or training costs that grow with dataset size. We introduce FlashDexRetarget, an RL framework for multi-reference dexterous retargeting. We formulate retargeting as multi-reference tracking, jointly learning a single policy across many demonstrations with off-policy RL and geometric supervision of the demonstrated interactions. This shared training formulation amortizes optimization across references while enabling the policy to track diverse hand-object interactions. On a 50-motion benchmark from TACO, OakInk2, and HOT3D using XHand and Sharpa Wave Hand as target embodiments, FlashDexRetarget retargets 90% of demonstrations using about 30 GPU-hours, compared with about 46% at about 3,000 GPU-hours for CHORD. This corresponds to about 100 times lower training compute and a 44-percentage-point improvement in retargeting success. Ablations examine the key design choices, while experiments with up to 1,000 motions and real-world replay further demonstrate the scalability and practical applicability of our method.

0.16

Res-HIL: Human-Guided Residual Reinforcement Learning for Sample-Efficient Dexterous Manipulation

cs.RO ·2026-09-24 ·Mariia Iavorskaia, Christian Dietz, Sebastian Albrecht, Majid Khadiv
similarity 0.75
Abstract

Imitation learning enables robots to acquire manipulation skills from demonstrations, but the resulting policies can fail outside the training data, while collecting more demonstrations requires substantial human effort. Human-in-the-loop reinforcement learning uses corrective feedback during online training, but typically learns the complete task policy rather than refining a pretrained imitation policy. We introduce Res-HIL, a human-in-the-loop residual reinforcement learning framework that learns corrective actions on top of a frozen imitation policy. Each human intervention provides two complementary learning signals: direct supervision of the residual policy and reward shaping of preceding autonomous behavior. Res-HIL combines these signals with zero initialization of the residual policy to stabilize and accelerate online learning. We evaluate Res-HIL on five contact-rich manipulation tasks spanning high-precision and long-horizon behaviors. With only 20 initial demonstrations, Res-HIL outperforms state-of-the-art full-policy human-in-the-loop reinforcement learning and residual fine-tuning without human guidance on every task after ten minutes of online training. Res-HIL improves its pretrained base policies and outperforms imitation policies trained with five times more demonstrations. An ablation study shows that direct residual supervision is critical to performance, while intervention-aware reward shaping substantially improves training efficiency.

0.16