CS Paper Radar

GeoWind2Plan: Mission-Time 3D Urban Wind Prediction for Energy-Efficient UAV Planning

Shaoxiang Qin, Yucheng Zhao, Fuyuan Lyu, Di Zhou, Jiachen Yao, Xue Liu, Anima Anandkumar, Liangzhu Leon Wang, Xiongye Xiao

cs.AI cs.RO ·submitted 2026-09-28 18:14 UTC · v2
top venuecode/data

Abstract

In urban low-altitude flight, buildings reshape ambient wind into spatially varying 3D flow, making unmanned aerial vehicle (UAV) energy depend on local wind exposure as well as path length. However, building-resolved wind is rarely available when a mission must be planned. Computational fluid dynamics (CFD) produces high-fidelity urban flow fields, but each simulation is tied to a fixed inflow boundary condition and can take hours to days, which is incompatible with urban UAV missions that typically last minutes to tens of minutes. We present GeoWind2Plan, a geometry-to-wind-to-planning framework for mission-time 3D urban wind prediction and energy-efficient UAV planning. Given only a background wind vector, 3D building geometry, and a start-goal pair, GeoWind2Plan transforms the building geometry into a reference-wind frame, predicts mission-relevant 3D wind patches with a localized geometry-conditioned neural operator, stitches them into a local wind field, and optimizes a feasible 3D path and speed profile using a physically grounded UAV energy model. Rather than pursuing CFD-perfect reconstruction, GeoWind2Plan targets decision-useful wind prediction: trajectories are planned with predicted wind and evaluated under high-fidelity CFD wind. Across held-out urban domains, wind speeds, and mission wind-angle regimes, GeoWind2Plan performs corridor-localized wind inference in about 3 s, compared with roughly 8 h for CFD. Under CFD evaluation, trajectories planned with GeoWind2Plan reduce energy by 6.9%, 12.7%, and 4.5% in tailwind, headwind, and crosswind missions relative to wind-agnostic planning, recovering 87.9%, 85.7%, and 75.0% of CFD-reference savings. These results show that fast, corridor-localized 3D urban wind prediction can make wind-aware UAV energy planning practical at mission time. Code/dataset: https://github.com/DUAL-Xiao/GeoWind2Plan/ . Demo: https://geowind2plan.com .

Comment
Accepted at NeurIPS 2026 (Spotlight). Code and dataset: https://github.com/DUAL-Xiao/GeoWind2Plan/ . Interactive demo: https://geowind2plan.com

Closest papers

Nearest neighbours by meaning across the whole index.

Wind-Informed Rapid Flight-Planning in Complex Urban Topologies via Machine Learning and Experimental Validation

cs.RO physics.flu-dyn ·2026-08-10 ·Peter I. Renn, Alejandro A. Stefan-Zavala, Julian Humml, Sabera Talukder, Aysha AlMazrouei +6 more
similarity 0.72
Abstract

Advanced air mobility operations hold the potential to enhance and expand regional transportation of both people and goods in populated areas. However, hazardous flight conditions arising from interactions between wind and the built environment remain a significant challenge for aerial vehicles in urban settings. This work proposes a novel framework towards safe flight planning of aerial vehicles in windy urban environments. A learning-based surrogate model is trained to rapidly predict flow fields from readily available information such as building geometry and incident wind. This surrogate prediction is used to calculate a volumetric flight challenge scalar field based on critical flow parameters and proximity to structures. A safe, flow-informed flight trajectory is then identified through a cost-minimizing pathfinder. The complete system is demonstrated experimentally through flight tests of a micro aerial vehicle through a model urban geometry placed in a large fan-array wind tunnel. Comparing this approach to trajectories generated without knowledge of the wind field, we find the flow-informed approach reduces undesired vehicle displacement and improves flight stability. This work is among the first practical demonstrations of safe, wind-aware methodologies for advanced air mobility in urban environments.

0.34

Shaping the Wind: Nested Potentials for Kinematically Admissible Urban Wind Prediction

cs.LG ·2026-10-04 ·Yidi Wang, Yunhe Zhang, Jiawei Gu, Ziyue Qiao, Pengyang Wang
dataset similarity 0.70
Abstract

Predicting transient urban winds is fundamental to understanding urban microclimates and designing climate-resilient cities. Building-resolving large-eddy simulation produces detailed incompressible urban wind fields at substantial computational cost for each layout. Neural surrogates offer a faster alternative by learning to predict the evolution of velocity fields. However, minimizing velocity prediction error does not guarantee local mass conservation and wall impermeability, which together define kinematic admissibility. This limitation stems from an unconstrained output representation: geometry conditioning guides predictions but does not restrict them to admissible velocity fields. Correcting boundary violations in these outputs changes the flux balance in adjacent fluid cells and may consequently compromise local mass conservation. To address the challenge, we propose Sculpt, a nested potential framework that builds the coupled, geometry-dependent constraints directly into its parameterization. This nested parameterization generates divergence-free velocity updates through the discrete curl of a volume vector potential on the native three-dimensional staggered grid. A shared scalar potential constrains the vector potential's boundary values so that the same operator also enforces impermeability, without a per-step pressure projection. Because backpropagation through this curl attenuates large-scale gradient signals, we parameterize the volume potential at multiple resolutions to better capture large-scale flow structures. We introduce UrbanWindFlow, an LES dataset spanning urban morphologies and inflow conditions, to evaluate accuracy and kinematic admissibility together.

0.15

Conditional Flow Matching for Generation of 3D Multi-variable Instantaneous Urban Microclimate Fields

cs.CE physics.flu-dyncs.LGphysics.ao-ph ·2026-10-07 ·Peng Liu, Shaoxiang Qin, Theodore Potsis, Lili Ji, Dingyang Geng +1 more
similarity 0.68
Abstract

Rapid and accurate prediction of urban wind and temperature fields is important for urban microclimate design and climate adaptation. Large-eddy simulation (LES) effectively resolves these instantaneous fields, but its application is limited in iterative design of urban microclimate applications due to high computational cost. Existing regressive data-driven models offers quick outputs, but they produce only deterministic point predictions that inherently fail to represent turbulent stochasticity. This paper adopts a novel generative framework of Conditional Flow Matching (CFM) that uses building geometry and mean flow as guidance to generate plausible three-dimensional instantaneous velocity and temperature fields for urban microclimate in seconds. To overcome the GPU memory bottleneck of pixel space 3D generation, the model operates in parallel on overlapping pixel space through a shared-noise initialization that preserves high spatial continuity of flow structure across the entire domain. Against reference LES data, the CFM surrogate can rapidly and accurately restore the first-order statistics with Normalized Root Mean Square Error (NRMSE) of 2.99% for wind and 1.77% for temperature, second-order turbulence metrics with NRMSE of 7.17% for wind and 8.84% for temperature, turbulent kinetic energy with NRMSE of 7%, probability density function and vertical profiles in representative locations. Wind engineering application of local gust prediction demonstrate that the speed and accuracy of CFM, supporting the use of generative AI for making turbulence-aware resilient urban design and climate adaptation more computationally feasible.

0.15

CommDreamer: Radio-Geometric World Models for Mapless Cellular-Connected UAV Trajectory Planning

cs.RO eess.SY ·2026-11-18 ·Yuqi Ping, Tianhao Liang, Tingting Zhang
code/data similarity 0.62
Abstract

Reliable cellular connectivity and collision-free flight are essential for unmanned aerial vehicle (UAV) operations in low-altitude urban canyons, where dense 3D buildings obstruct flight clearance, shadow serving base stations, and create strong co-channel interference at street intersections. Existing planners either require prior 3D city meshes and channel knowledge maps unavailable onboard, or rely on model-free reinforcement learning with low sample efficiency and poor cross-city generalization. We propose CommDreamer, a mapless radio-geometric world model that fuses raw onboard 3D LiDAR scans, multicell cellular reports, and shift-invariant relative kinematics to jointly infer local obstacle clearance and directional signal-to-interference-plus-noise ratio (SINR) dynamics. Using a categorical recurrent state-space model, CommDreamer compresses multimodal measurement histories into a coordinate-invariant latent belief, enabling the UAV to foresee deep shadow zones and train a lightweight online policy purely via multi-step latent imagination without prior maps or antenna patterns. Zero-shot evaluations across unseen urban morphologies in our open-source ray-tracing simulator, AeroCity-RT, show that CommDreamer converges within 150 episodes where model-free reinforcement learning fails to complete flights, achieving 100.0% mission success with zero collisions while lifting median route SINR to 8.02 dB and cutting effective SINR outage by over 50% relative to radio-blind world-model and reactive LiDAR baselines.

0.39

Adaptive Long-range UAV Flight Planning using Monte Carlo Search Trees

eess.SY ·2026-10-19 ·Chi Keng Dong, Justin Kernot, Dominic Liao-McPherson
published similarity 0.59
Abstract · Authors' accepted manuscript. Published in AIAA, DOI: 10.2514/1.G010042

Long-range fixed-wing UAV missions require energy-efficient, dynamically feasible trajectories that can adapt online to evolving wind and airspace constraints. We present a Monte Carlo Tree Search (MCTS)-based framework that addresses this challenge by formulating mission planning as a finite-horizon Markov decision process incorporating aircraft kinematics, onboard energy dynamics, forecast wind fields, terrain, and time-varying no-fly zones. The MCTS planner searches over waypoint references generated by pre-stabilizing feedback controllers and a constraint-aware navigation field, yielding dynamically feasible trajectories. Simulation results from medical delivery scenarios show that the MCTS planner outperforms baseline geometric planners and population-based optimization algorithms. Moreover, the MCTS planner can be used in closed-loop to rapidly compute safe diversion trajectories under evolving constraints.

0.22

CityCode: Building Agent-Operable 3D Cities from Sparse Aerial Observations

cs.CV ·2026-10-13 ·Jiahui Sun, Ran Bi, Yifei Liu, Xiaolong Zhou, Yishuo Xu +6 more
similarity 0.58
Abstract · 13 pages, 4 figures;

Urban spatial intelligence calls for 3D cities that agents can measure, interpret, and modify across successive tasks. Maintaining such cities as persistent, code-based states requires lightweight acquisition and support for consistent state updates without repeated dense reconstruction. We therefore formulate a new setting for grounded urban world construction: generating large-scale, instance-level parameterized 3D cities from one low-altitude aerial RGB image per region and known camera parameters, while recovering metrically scaled buildings and explicit road geometry and connectivity. We introduce CityCode, an agent-operable representation that unifies metric geometry, urban topology, visual semantics, and 3D assets through persistent entity identities, with dependency-aware versioned execution for validated updates and historical restoration. We further develop Air2Code to construct this representation by combining visual structure extraction with adapted metric depth estimation. To address occlusion and incomplete coverage, recovered structure and observed appearance guide generative completion and subsequent structure-aware 3D generation for buildings and backgrounds. Experiments on CitySample-Aerial and UrbanScene3D demonstrate substantially more accurate metric structure recovery and superior visual fidelity to the target cities compared with the evaluated baselines. Across 50 task chains of 50 steps each, CityCode supports continued querying, editing, planning, and historical restoration over evolving city states. Together, CityCode and Air2Code turn sparse aerial observations into persistent, agent-operable urban worlds for long-horizon urban spatial intelligence.

0.18

Nonlinear Model Predictive Control for Trajectory Tracking of Differentially Flat Fixed-Wing Aerial Systems

cs.RO ·2026-08-21 ·Nishanth Bobbili, Pratyaksh Rao, Luca Morando, Luca Masci, Giuseppe Loianno
similarity 0.58
Abstract

Planning and control of fixed-wing Unmanned Aerial Vehicles (UAVs) are challenging due to nonlinear dynamics, aerodynamic limits, and environmental disturbances. Differential flatness offers a principled way to generate fast, feasible trajectories, but its use has largely been confined to model-free controllers, which lack predictive capabilities and demand tuning. In this paper, we propose a unified framework that integrates differential flatness-based trajectory generation with Nonlinear Model Predictive Control (NMPC), combining computationally efficient planning with predictive, constraint-aware control. To further improve robustness, we introduce a wind-aware sampling strategy embedded within the NMPC framework, enabling the generation of dynamically feasible reference trajectories that proactively account for wind disturbances while strictly enforcing aerodynamic and control input constraints. We validate the proposed framework through extensive simulations and real-world flight experiments, demonstrating improved tracking accuracy and robustness for complex trajectories, particularly when using the proposed wind-aware sampling strategy under strong wind conditions.

0.21

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.58
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06