CS Paper Radar

Physical Cross-Modal Masked Autoencoding for Seismic-to-Well Representation Learning

Meher Gajula, Keyla Gonzalez, Ben Lasscock, Alejandro Valenciano

cs.LG physics.geo-ph ·submitted 2026-09-28 19:56 UTC · v1

Abstract

Learning from scientific measurements often requires aligning modalities with different spatial support and resolution. Subsurface characterization is an extreme dense-sparse problem in which 3D seismic provides volumetric but indirect measurements and well logs provide high-resolution 1D measurements at sparse borehole locations. We introduce a physically grounded cross-modal masked autoencoder (CM-MAE) for seismic-to-well representation learning. The model jointly tokenizes seismic volumes and well-log depth patches, embeds both modalities in continuous physical coordinates using four-axis rotary position embeddings, and reconstructs masked targets with a cross-modal decoder. Sparse Mixture-of-Experts layers provide modality-specific capacity while dense attention allows information exchange between modalities. Pretraining uses 23 seismic volumes covering approximately 178,000 square km across U.S. offshore and onshore basins, together with approximately 92,000 wells. Matched-mask ablations show strongly asymmetric information flow. Seismic context improves held-out well-log reconstruction by 9.73%, while well-log context improves seismic reconstruction by 0.65%. We evaluate seismic-only pseudo-log predictions against independent interpreter-drawn salt-geobody masks to determine whether they contain geologic signal. Across offshore U.S. surveys, compressional-slowness-derived salt scores reach an AUROC of 0.910. In onshore basins, predicted compressional slowness preserves formation-scale structure and partial relative organization in an unseen survey despite calibration drift. CM-MAE learns useful seismic-to-well representations under extreme modality asymmetry, although absolute pseudo-log calibration remains survey-dependent.

Comment
11 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A Seismic Foundation Model for Dense Feature Extraction

cs.CV ·2026-11-16 ·Zhixiang Guo, Xinming Wu, Yimin Dou, Hui Gao, Siyao Zhao +2 more
similarity 0.71
Abstract

Deep-learning-based seismic interpretation is constrained by scarce high-quality annotations, and most existing models are trained separately for individual tasks. We present SeisDFE, a 7B-parameter seismic foundation model for dense feature extraction, pretrained on 5.34 million 2D images derived from more than 500 seismic volumes. A three-stage pretraining strategy, combining discriminative self-supervised learning, Gram feature anchoring, and multi-resolution adaptation, improves feature discriminability while preserving spatial coherence. With its encoder frozen, SeisDFE supports seismic facies classification, salt detection, fault detection, and relative geologic time estimation. It outperforms existing seismic foundation models on all four tasks and a natural-image-pretrained model on all but fault detection, with the largest gains under scarce supervision: using only two annotated sections of the F3 dataset, it improves whole-volume mIoU by 12-19 percentage points over the baselines. The learned features remain effective with task-specific decoders and extend to synthetic-to-field transfer and sparse 3D geobody interpretation. These results show that large-scale seismic pretraining organizes geological information into dense representations that are directly reusable across interpretation tasks.

0.24

Spatial-Spectral Interactive POCS Network for Large-Gap Seismic Data Interpolation

cs.CV ·2026-10-31 ·Baisong Jiang, Chunxia Zhang, Anxiang Di, Xiaoli Wei, Xiangyu Zhao +2 more
similarity 0.69
Abstract

Large gaps in seismic acquisition disrupt reflection events and hinder spectral recovery. Existing seismic interpolation deep unfolding networks primarily rely on localized spatial priors, limiting their ability to aggregate the global context necessary for reconstructing these extensive missing regions. We propose a spatial-spectral interactive projection-onto-convex-sets network (SSI-POCS) to tackle this severely ill-posed problem. By unfolding the classical iterative solver, our network integrates physical consistency with dual-domain deep priors via learned transforms, soft thresholding, and exact data reinsertion. Within the learned prior, a spatial Restormer branch captures local waveform structures, while a fast Fourier convolution (FFC) branch extracts global context, effectively suppressing incoherent components and enhancing spectral energy concentration in the $f-k$ domain. A dual-domain fusion module exchanges these complementary features via bidirectional channel attention and gated modulation, yielding substantial interpolation improvements. To overcome the severe loss of lateral continuity caused by large gaps, we introduce structural similarity (SSIM) supervision, complemented by focal frequency loss (FFL) and transform consistency constraints to suppress incoherent high-frequency components and regularize training. Experiments on a synthetic salt dome and a North Sea field dataset under 50% random and consecutive trace removal demonstrate the effectiveness of SSI-POCS. It significantly enhances event continuity across large gaps and mitigates artifacts, achieving a 3.285~dB SNR improvement over the best competing method while reducing parameters by 75.66%.

0.42

Depth-progressive 3D seismic velocity model building via 2D generative diffusion models

cs.AI physics.geo-ph ·2026-10-10 ·Shijun Cheng, Randy Harsuko, Mohammad H. Taufik, Tariq Alkhalifah
benchmark similarity 0.68
Abstract

Three-dimensional (3D) velocity model building (VMB) remains computationally challenging with conventional approaches and native 3D neural networks, largely due to the prohibitive memory and training cost of full 3D formulations. Therefore, we introduce a depth-progressive framework that achieves 3D VMB using 2D generative diffusion models through a depth-as-channel formulation, in which the depth dimension of each 3D velocity patch is mapped to the channel dimension of a 2D U-Net. This allows the model to synthesize overlapping depth patches sequentially from shallow to deep while conditioning the prediction of the deeper patch on the shallower one, as well as on any available geophysical constraints, including well logs and structural attributes. During training, paired shallow-deep patch pairs with randomized overlaps are used to teach the network how deeper velocity structures relate to shallower information, and a classifier-free guidance strategy enables the model to handle missing constraints gracefully. At inference, starting from a shallow velocity prior, the model recursively generates deeper patches in a top-down manner, and a depth-attenuated Gaussian blending scheme merges overlapping predictions into spatially coherent 3D volumes while accounting for the progressive accumulation of uncertainty at greater depths. Numerical experiments on both in-distribution benchmark models, including Overthrust, SEAM Arid, and SEG/EAGE, and the out-of-distribution Marmousi model demonstrate that the method effectively propagates shallow velocity priors downward and produces high-quality 3D velocity volumes across a range of geological settings and conditioning scenarios. Compared to a 3D benchmark of equivalent architecture, the proposed method significantly reduces parameter count, training cost, and inference cost, while maintaining superior VMB accuracy.

0.18

A Transferable Pretrained 3D Model for Impedance Inversion with Sparse-Well Prior Conditioning

cs.LG physics.geo-ph ·2026-11-11 ·Gen Li, Zhaoyun Zong, Diqiong Jiang, Man Tang
similarity 0.68
Abstract

Deep-learning-based seismic impedance inversion commonly requires retraining for each target survey, which may generalize poorly beyond the conditioning locations when well control is extremely sparse. We propose a transferable three-dimensional inversion framework that separates offline learning from target-survey deployment. A masked autoencoder first learns seismic structural representations from unlabeled multi-survey data, after which the frozen encoder is incorporated into an inversion network trained on synthetic geological models with sparse-well-derived low-frequency priors. During deployment, the complete inversion network remains fixed; the available conditioning well is used only to construct the low-frequency prior and align the global impedance range. Experiments on the Overthrust model show that the proposed method achieves the lowest full-volume NRMSE and reduces the P95 trace-wise NRMSE from 0.1310 to 0.1074 relative to the best target-trained baseline, indicating fewer localized large errors under different well locations. In a field survey with one conditioning well and three blind wells, it reduces the mean blind-well NRMSE by 20.95% relative to the target-trained U-Net while maintaining the highest correlation. These results demonstrate that the proposed framework transfers useful impedance information beyond the conditioning location with low deployment cost and without retraining the inversion network.

0.17

Seismic Site Response Prediction from Sparse Observations Using Finite-Element-Pretrained Latent Dynamics

cs.LG ·2026-09-17 ·Yi Zhu, Su Chen, Xiaojun Li
similarity 0.65
Abstract

Numerical site-response predictions often deviate from observations, yet correcting these discrepancies is difficult because records are limited in both sensor coverage and number of events. This study proposes the Transfer-Enabled Forced Latent Autoencoder for Response Equations (FLARE-T) to improve these predictions by learning and calibrating low-dimensional latent dynamics that connect the base acceleration input to acceleration outputs at multiple depths. FLARE-T learns a low-dimensional response manifold and input-driven dynamics from dense finite-element simulations. It then trains a sparse encoder to map simulated sensor responses into the learned coordinates and uses limited records to calibrate the dynamics within them. A short response window initializes each prediction, while the complete base motion drives the response. The framework was evaluated using a layered-soil centrifuge test and the Lotung field vertical array. Test-set results show that FLARE-T improved multi-depth acceleration histories and 5%-damped pseudoacceleration response spectra relative to the original finite-element models, reducing errors at every evaluated sensor for motions of different intensities and, at Lotung, for both horizontal components. Two Lotung source models with different constitutive parameters achieved comparable test-set accuracy, indicating reduced dependence on precise prior calibration. FLARE-T therefore provides a data-efficient means of combining dense numerical response information with limited field records to improve future site-response predictions.

0.25

DeepStratNet: A Context-Aware Coordinate Regression Framework for Seismic Horizon Tracking under Sparse Labels

cs.CV ·2026-10-01 ·Aniq Ahmad, Musham Ahmad Malik, Ahmad Mustafa, Heather Bedle
similarity 0.63
Abstract

Automatic horizon tracking is a foundational task in 3D seismic interpretation. Most existing deep learning approaches formulate it as dense semantic segmentation, typically using U-Net-based architectures. The model produces a probability map over all pixels that must be post-processed to extract precise horizon coordinates, while horizon picks in time/depth must be converted into dense masks for training. Unpicked seismic traces are consequently treated as background, which can hinder convergence, and both pre- and post-processing can introduce errors into the final interpretation. Moreover, 2D segmentation models do not inherently capture inter-slice context, while 3D models are often computationally prohibitive. We instead formulate horizon tracking as a bounded coordinate regression problem, where the model directly predicts the time/depth coordinate of the target horizon at each lateral position. We propose a lightweight regression head compatible with any pretrained vision backbone, coupled with an LSTM module to model inter-slice context and produce a continuous horizon surface across the volume. A combination of L1 and L2 losses supervises predictions at valid horizon picks, while a geology-informed regularization enforces lateral continuity between successive traces. Under controlled experimental conditions, we evaluate four pretrained vision backbones under both segmentation and regression configurations on a seismic volume from New Zealand. The proposed approach consistently outperforms its segmentation counterparts quantitatively, using metrics including RMSE and PCC, and qualitatively, while also demonstrating greater robustness to increasing sparsity of training picks. Finally, we show that prediction variation across successive traces captures local variations in geological complexity, providing an automated quality control measure for downstream seismic interpretation.

0.24

SeisMamba: Low-Latency Single-Station Seismic Magnitude Estimation for Spatially Distributed Earthquake Early Warning

cs.LG ·2026-08-25 ·Quenton Yeo, Zhaoge Bi, Linghan Huang, Luke Stephen Higgins, Flora Salim +1 more
benchmark similarity 0.63
Abstract

Rapid earthquake magnitude estimation is central to earthquake early warning, yet many operational systems depend on dense regional seismic networks and region-specific calibration. This creates a spatial coverage barrier for high-risk areas with sparse sensing infrastructure. Single-station learning offers a lower-cost alternative, but existing models often face an accuracy--latency trade-off and may degrade under regional distribution shift. We present SeisMamba, a lightweight Mamba-based architecture for low-latency magnitude estimation from minimally processed three-component seismic waveforms recorded at a single station. SeisMamba combines hierarchical convolutional encoding, sparse selective state-space modelling, multi-scale feature fusion, and an auxiliary temporal prediction head to support efficient long-sequence waveform analysis. On the STEAD benchmark, SeisMamba achieves the best MSE, RMSE, and $R^2$ among tested baselines while requiring only 0.55 ms for a batch of 32 waveforms on an NVIDIA T4 GPU, making it about three times faster than transformer-based baselines. We further conduct a Chile--Taiwan regional hold-out experiment as a diagnostic test of cross-region deployment, where SeisMamba retains useful performance on geographically unseen seismic regions. These results suggest that selective state-space waveform modelling provides a promising accuracy--latency backbone for spatially distributed, low-cost earthquake early warning.

0.17

Ranking Competing geologic interpretations via foundation-model-assisted generative hydrologic inversion

cs.LG ·2026-09-17 ·Harun Ur Rashid, Daniel O'Malley
benchmark similarity 0.63
Abstract

High-consequence subsurface decisions often rely on sparse data that permit competing geological interpretations. Determining consistency of these interpretations with the available observations remains challenging. We present a workflow that addresses this challenge by translating competing geologic interpretations into alternative priors and ranking them according to their consistency with hydraulic-head observations. A key step in this workflow is exploiting the broad knowledge of image-generation foundation models to transform nuanced geologic interpretations into data ready for computer modeling. For each interpretation, a text-to-image foundation model generates an ensemble of geologic images, and a separately trained variational autoencoder learns an interpretation-specific latent representation. A supervised inverse network maps head observations into this latent space, and the frozen decoder reconstructs an image that is mapped to a log-conductivity field. Steady-state flow simulations predict heads, and the aggregate normalized head error determines the ranking. We evaluate the framework using a synthetic benchmark based on the Johansen Formation with three interpretations of decreasing consistency with the reference geology. Across 595 test cases, the Precise \& Accurate interpretation produces lower normalized errors than Accurate in 58.5\% of cases and Mismatched in 82.5\% of cases. Accurate outperforms Mismatched in 65.5\% of cases. We then compare spatial representations of two published conceptual models of the Culebra Dolomite Member at the Waste Isolation Pilot Plant. The revised representation yields an aggregate normalized error of 7.598, compared with 8.595 for the original, consistent with the documented conceptual-model revision. The framework enables quantitative comparison of competing geological interpretations using available hydraulic observations.

0.29