CS Paper Radar

HACo: Learning Haptic Active Compliance for Force-Aware Dexterous Manipulation

Naisheng Ye, Yinzhe Zhou, Junkai Zhao, Yuhang Lu, Checheng Yu, Zhenjie Yang, Pengwei Wang, Hongyang Li

cs.RO ·submitted 2026-09-29 03:17 UTC · v2
benchmark

Abstract

Contact-rich dexterous manipulation requires policies that translate physical feedback into motion commands while regulating interaction loads across evolving multi-contact interactions. This requires haptic observations of contact state and action supervision showing how commands should adapt. Existing policies often overlook complementary fingertip tactile and joint-torque feedback, while common action targets either encode excessive loading or omit motion constrained by the object. We introduce HACo, a Haptic Active Compliance policy that learns force-regulating actions directly from haptic feedback. Compliance-regulated teleoperation converts operator inputs into controller-executable compliant actions that preserve motion intent while regulating loads. HACo learns these actions directly, using command-state discrepancy as auxiliary compliant-intent supervision. It combines local fingertip tactile responses with joint-torque feedback capturing load transmission through the articulated hand, including contacts beyond tactile coverage. A Compliance Grounding Module uses gated haptic cross-attention to ground action generation in the evolving haptic state, enabling closed-loop force regulation without explicit online contact modeling. We evaluate HACo on a real-world benchmark covering multi-contact friction, tangential interaction, fragile curved-surface contact, rotational torque, and deformable-object manipulation. Across 20 trials per task, HACo achieves an 83% mean success rate, compared with 35% for the strongest evaluated baseline. These results demonstrate active compliance across diverse force-sensitive dexterous manipulation tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

ReDex: Repairing Sim-to-Real Dexterous Policies by Finger-Level Compliant Interaction

cs.RO ·2026-10-05 ·Jinzhou Li, Hadi Tabatabaee, Kelin Yu, Yuyin Sun, Cheng-Hao Kuo +4 more
similarity 0.78
Abstract

Dexterous manipulation policies trained in simulation often fail to transfer to the real world because of errors in contact timing and force regulation. Yet these policies can retain useful multi-finger coordination for task progression. We propose ReDex, a framework for adapting a simulation-trained base policy to the real world by correcting local contact failures and incorporating tactile feedback. Starting from a proprioception-only base policy, ReDex allows a human operator to physically correct contact failures at selected fingers under compliant control during real-world rollouts, while the frozen base policy continues to control the remaining fingers. These rollouts combine base policy execution, human-corrected finger motion, and fingertip force observations. We reconstruct force-informed targets from these rollouts to train a standalone force-conditioned policy via behavior cloning. This design reduces human correction effort, enables learning of contact regulation from real-world interaction, and introduces force feedback into a proprioception-only policy without tactile simulation or complex full-hand teleoperation. We evaluate ReDex on two challenging, contact-rich dexterous manipulation tasks on real hardware. Compared with sim-to-real transferred base policies, ReDex increases Object Flipping success rate from 14\% to 86\% across two objects and average Screwdriver Rotation progress from 26.0% to 95.3% across three objects.

0.13

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

cs.RO ·2026-10-27 ·Cunxi Dai, Botao He, Francois R Hogan, Wei Pan, Rao Fu +5 more
similarity 0.76
Abstract · Project webpage: https://card-retargeting.github.io/

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

0.39

Unified Visual-Tactile-Action Modeling from Human Demonstrations for Dexterous Manipulation

cs.RO cs.AI ·2026-09-28 ·Wenqiao Li, Qianyou Zhao, Jiawen Hao, Xuezhou Zhu, Tengyu Liu +3 more
datasetcode/data similarity 0.75
Abstract

Dexterous manipulation requires tactile feedback. However, robot tactile demonstrations are difficult to scale,because dexterous-hand teleoperation provides limited tactile feedback to the operator. In contrast, human demonstrations offer a substantially more scalable source of diverse tactile interactions. Motivated by a simple premise: hands can change, but the underlying physics of interaction does not. We leverage human tactile data to improve dexterous manipulation policies. Specifically, we first build a tactile motion-capture system that synchronously records images, tactile signals, and hand motions. Using this system, we construct the UVTA dataset spanning five contact-rich tasks, with 1,000 human demonstrations covering diverse interaction patterns and 150 robot demonstrations per task. To transfer the underlying physics of human interaction to robot control, we propose a Unified Visual-Tactile-Action Model that maps both embodiments into aligned tactile and action representations and jointly predicts future action and tactile trajectories. The joint objective enables human demonstrations to supervise contact-aware representation learning, while only robot actions are executed during deployment. In real-robot evaluations across five tasks, our method achieves an average success rate of 70%, outperforming the strongest visual-tactile baseline, which achieves 29%, and an architecture ablation, which achieves 42%. Performance improves consistently with additional human demonstrations and exhibits no saturation at 1,000 demonstrations per task, validating the effectiveness of scalable human tactile data for dexterous manipulation. Project page is available at https://uni-vta.github.io/.

0.46

ProxiDex: Learning Dynamics-Guided Proximity Policy for Dexterous Manipulation

cs.RO cs.AI ·2026-09-15 ·Yushan Bai, Boyu Zheng, Zhiyang Mao, Hongzheng Sun, Yuchuang Tong +2 more
publishedcode/data similarity 0.75
Abstract · Accepted at the 10th Conference on Robot Learning (CoRL 2026). Project page: https://proxidex.github.io/

Multi-finger dexterous manipulation relies on stable hand-object interactions, yet these interactions are partially observable in practice. Visual observations are often occluded by the hand, tactile sensors introduce hardware-specific modalities and calibration burdens, and existing policies rarely model how these cues evolve under actions, making them brittle under contact uncertainty. To address these, we present ProxiDex, a dynamics-guided proximity policy framework that treats hand-object proximity as an interaction state for dexterous manipulation. ProxiDex reconstructs interaction point clouds and converts geometric distances into proximity cues, forming a hardware-agnostic contact representation that provides immersive feedback during VR teleoperation. Built on this representation, ProxiDex learns action-conditioned proximity dynamics with a coupled forward-inverse design: future observation latents are predicted from actions, while proximity variations are decoded from latent changes. Leveraging these dynamics, ProxiDex adaptively reweights proximity tokens across manipulation phases and uses dynamics-consistency supervision to guide policy inference, stabilizing action generation under unreliable visual feedback. Simulation and real-world experiments demonstrate improved success rates and robustness over representative baselines across standard, unseen objects, and perturbation scenarios. Additional visualizations are available at https://proxidex.github.io/.

0.41

Touch Where It Matters: Learning Local Tactile Policies for Fine-Grained Gripper Control

cs.RO ·2026-10-17 ·Mingyuan Ba, Yanan Zhou, James Zhao, Weiming Zhi
similarity 0.75
Abstract · 9 pages, 11 figures, 3 tables

Visual imitation policies can organise task motion, yet contact-rich object use demands gripper adjustments beyond coarse opening and closing. We study fine-grained gripper control as a local feedback problem within ongoing task execution. Our approach assigns tactile feedback a dedicated control role during contact-rich task stages. We introduce ContactPolicy, a learned local controller that takes over the gripper while a visual base policy continues to control the arm. ContactPolicy combines tactile and force histories with current robot state to jointly predict gripper increments and their modulation, updating the gripper target from each new observation. An Intent policy manages control handover between the visual base policy and ContactPolicy. Real-world experiments on container opening, object handling, and tool operation show improved task success over both the Visuomotor Policy and Tactile-Force Policy baselines. Execution analysis illustrates how the gripper adjusts contact within an ongoing task, including periods of target retention and fine-grained changes as interaction conditions evolve. Arm-state ablations and failure analysis further examine how execution context supports local regulation. These results support task-local tactile policies for fine-grained gripper control within visual manipulation.

0.16

DexTaG: Tactile-as-Guidance in Reinforcement Learning for Dexterous Manipulation

cs.RO ·2026-09-27 ·Han Yang, Yian Wang, Yunlong Song, Zhenjia Xu, Chuang Gan
similarity 0.75
Abstract

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

0.19

Learning Reflexive Behavior for Contact-Rich Manipulation

cs.RO ·2026-10-02 ·Quan Nguyen, Yunho Kim, Joonho Lee
similarity 0.74
Abstract

During contact-rich manipulation, interactions between a robot and its environment carry information about local geometry: a surface prevents penetration, a bore guides a peg. A controller that exploits these interactions can comply with environmental constraints while preserving task intent. Robot-earning systems commonly use position, hybrid force-position, or Cartesian impedance control. Their prescribed tracking objectives, stiffness, or force-control directions may not match local constraints and may degrade performance. We learn a proprioceptive reflex policy in simulation on three simple interaction primitives: a spring, a plane, and a rail. The policy maps task-space commands to joint-position targets using state history, without direct force or geometrical measurements. Once trained, it serves as a frozen execution layer beneath higher-level controllers. We evaluate it in dual-arm box lifting, peg insertion, and surface following. In box lifting, the reflex kept the force below the threshold while the baseline failed. In rough-surface following it stayed below the 10 N reference, on par with tuned hybrid force-position control. In 0.02 mm peg insertion It reduced mean estimated contact force to less than half that of the baseline while increasing hardware success rates from at most 22 % to 36-58 %. By separating contact response from command generation, the reflex policy provides motion planners, learned policies, and teleoperators with robust contact-rich execution.

0.15

RUMI: A Robotiq-Matched Universal Manipulation Interface for Robot Learning with Augmented Reality and Haptic Feedback

cs.RO cs.AI ·2026-11-11 ·Kevin Avdiu, Seongjin Bien, Yannik Blei, Philine Meister, Johannes Hechtl +4 more
similarity 0.74
Abstract

Many manipulation tasks require carefully controlled contact forces for successful execution, yet large-scale, force-aware datasets remain scarce. Handheld interfaces can help by transmitting interaction forces directly through the operator's arm, but most existing designs are tailored to simple linear grippers and do not match the nonlinear mechanics of widely used robotic grippers. We present RUMI, a handheld universal manipulation interface matched to the Robotiq 2F-85 with exchangeable fingertip sensors that preserves the target gripper geometry while enabling natural input before contact and force measurement after contact. By integrating the tracking system into a virtual reality headset, our method provides real-time augmented reality feedback about the kinematic feasibility of motion on the target robot platform. We further introduce a haptic feedback mechanism that supports force-aware teleoperation for simulated and real robots. A user study shows fewer episodes containing joint-limit violations with live robot visualization and pose initialization (3/50) than without augmented reality (16/50). We additionally train imitation policies from demonstrations, collected using two different fingertip modalities enabled by the gripper-matched hardware, and assess the haptic interface's capability for collecting force-aware teleoperation datasets in simulation.

0.05