CS Paper Radar

Embedded Bi-Temporal Building Damage Assessment for On-Board Data Reduction

Thomas Goudemant, Benjamin Francesconi, Marjorie Bellizzi, Adrien Dorise

cs.CV cs.AI ·submitted 2026-09-29 08:34 UTC · v2

Abstract

Rapid assessment of building damage after natural disasters is essential to support emergency response. Earth Observation satellites can acquire relevant imagery shortly after an event, but exploitation is limited by uplink and downlink capacity and by ground-processing latency. We address this with a bi-temporal building damage assessment pipeline built on a siamese detector derived from YOLOX, designed to compress information at both ends of the ground/space link. On the ground, pre-disaster reference images are encoded into a compact latent space -- compressed by up to a factor of 64 -- and uplinked to the satellite. On board, this reference is compared with a fresh post-disaster acquisition so that the downlink carries only actionable object-level products, bounding boxes and damage classes, instead of full scenes. This cuts the data exchanged in both directions, while on xBD the strongly compressed reference still preserves most of the detection performance. Because on-board acquisitions suffer from residual pre/post co-registration errors, we introduce a latent-space shift estimation and correction module that regresses the global offset from the coarse feature level and realigns the post-disaster features before fusion. It substantially improves robustness to de-registration -- especially under large shifts, where fusion-only variants collapse -- while also raising nominal accuracy and remaining compatible with the strongest compression. We finally port the pipeline to two embedded targets, a Xilinx Versal VCK190 and an NVIDIA Jetson AGX Orin, and report hardware performance (latency, throughput, power efficiency). The core detector and its compression port cleanly to both, but the operators needed for long-range robustness survive only on the Jetson GPU, whereas the Versal DPU does not.

Comment
8 pages. Accepted at OBPDC 2026 (International Workshop on On-Board Payload Data Compression), Barcelona, October 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Revisiting the Task of Building Damage Assessment by Satellite Imaging

cs.CV ·2026-10-09 ·Anthony Cioppa, Virgile Blua, Sébastien Piérard, Pietro Ceccato, Marc Van Droogenbroeck
hot direction similarity 0.66
Abstract · 82 pages, 2 figures, 9 tables, 160 references

Natural disasters such as earthquakes, tropical storms, and floods cause extensive damage to buildings, and rapid, reliable damage maps are essential to guide emergency response. Automating this task, referred to as building damage assessment (BDA), from satellite imagery, has become an active research topic at the intersection of remote sensing, computer vision, and machine learning, particularly since supervised deep learning methods were shown to outperform earlier handcrafted approaches. Yet, despite a decade of intense activity and the release of several large-scale datasets, the field lacks a shared foundation. This chapter revisits the task of BDA from first principles, organized around three pillars: data, evaluation, and methods. We first clarify the candidate task for- mulations and argue for a sensor-agnostic, instance-based definition that tolerates missing pre-event imagery. We then review existing datasets along the axes of sensing modality, temporal configuration, and geographic coverage. On the evaluation side, we show that prevailing practices, largely based on a single aggregate score, are theoretically fragile, and we lay the foundations of a more informative, ranking-based, multi-score protocol. We further review methods ranging from task-specific deep networks to recent Earth observation foundation models, noticing that generalization to unseen events and regions remains an open difficulty. Finally, we discuss how these elements can inform the organization of a BDA challenge, including cross-validation, challenge, and private data-sharing setups designed to build trust between developers and users.

0.31

Neighbourhood shortcuts in building damage assessment from very-high-resolution satellite imagery: diagnosis and a building-evidence plug-in

cs.CV ·2026-10-28 ·JianChong Guo, YuTing Wan, Kefan Li, AiLong Ma, YanFei Zhong
code/data similarity 0.65
Abstract · 22 pages, 9 figures, 11 tables. Code: https://github.com/SummerTide/neighbourhood-shortcut-bda

Building damage assessment (BDA) from very-high-resolution imagery supports disaster response, and deep models now achieve high overall accuracy on public benchmarks. Because damage is spatially clustered, most buildings share the damage level of their neighbours, so overall scores are dominated by such buildings, whereas damaged buildings among intact ones are rare and easily overlooked. A high overall score therefore cannot tell whether a model judges the building itself or relies on its neighbourhood as a shortcut, and this study tests which of the two current models do. We stratify buildings by their agreement with their neighbours, move buildings into new neighbourhoods with their pixels unchanged, and diagnose nine models covering the main paradigms of BDA. All models miss a third to half of the isolated damaged buildings, and in non-flood events they call 73--87% of intact buildings damaged once these are moved into a damaged neighbourhood. We propose a building-evidence plug-in that adds two experts to an existing model without retraining it. One expert sees only the building, and the other sees its surroundings but is trained with seamlessly swapped neighbourhoods so that it learns not to trust them. With each of the nine models, the plug-in maintains or improves overall accuracy, reduces errors on buildings that disagree with their neighbours by 8--18%, and cuts by 40--69% the intact buildings that a damaged neighbourhood turns into damaged ones. It also raises the detection of synthetic isolated damage from 1--6% to 13--39% and carries over to optical--SAR data and to an unseen earthquake. High overall scores thus conceal a systematic reliance on the neighbourhood, which building-level evidence reduces at low cost.

0.27

PoE-Fuse: Precision-Weighted Expert Fusion for Bi-Temporal Change Understanding

cs.CV cs.LG ·2026-09-27 ·Haruki Watase, Shunya Nagashima, Takayuki Nishimura
published similarity 0.65
Abstract · Accepted by ACCV 2026

Bi-temporal change understanding, which localizes and characterizes what changed between two satellite images, is central to disaster response and environmental monitoring, spanning change detection, building localization, and damage assessment. Strong vision-language models address these tasks, but adapting them typically requires full fine-tuning or reinforcement learning, which is costly and unstable. We propose PoE-Fuse, a parameter-efficient framework that instead composes frozen foundation experts for geometry, grounding, and language, resampling their features onto a shared spatial grid and training only a lightweight fusion trunk. PoE-Fuse treats the aligned features as Gaussian observations of a latent scene state and fuses them by learned per-cell precision. This product-of-experts estimator strictly generalizes uniform summation and scalar gating, and extends to change fields by composing the precisions of the two timestamps. A single shared trunk solves the three tasks at once, reaching a mean F1 of 59.2%, compared with 40.7% for an instruction-tuned temporal vision-language assistant, and surpassing dedicated change-detection models retrained under the same protocol and training budget.

0.37

Feature Recovery for Object Understanding After Irreversible Fire Damage

cs.CV ·2026-09-10 ·Aditi Tiwari, Sofia Stoica, Savya Khosla, David Forsyth, Heng Ji
benchmark similarity 0.64
Abstract · 28 pages, 11 figures, 9 tables

Objects in post-fire environments often undergo irreversible physical transformations that change their geometry, material state, and visual appearance. Detecting and identifying these remnants is critical for locating hazards, reconstructing pre-incident contents, and inventorying losses. Unlike standard image corruptions, these degradations affect the physical structure of the object itself. To study this setting, we introduce TRACE, a transformation-aware benchmark for post-fire object understanding. TRACE contains 21.4K real-image-grounded synthetic scenes and paired object-level pristine-to-degraded progressions spanning 499 object identities across 189 categories. We define five tasks targeting localization and pre-degradation understanding: degraded-object detection, pristine-state recovery and retrieval, original material recovery, pristine description generation, and functional reasoning. Existing models degrade sharply with severity. From the least to the most severe level, RF-DETR mAP decreases by 71% relative, while InternVL3.5 retrieval R@1 falls from 93.85 to 28.11. To address this, we propose the Feature Recovery Module (FRM), a plug-and-play module that maps degraded encoder features to pristine-aligned representations while keeping the host frozen. Trained only with paired feature supervision, FRM improves scene-level detection, CLIP/SigLIP2 feature recovery, and all four object-level VLM tasks, with larger gains under more severe degradation. Across VLM hosts and severity levels, relative gains average 12.5% for retrieval, 20.1% for material recovery, 13.2% for description generation, and 12.4% for functional reasoning.

0.34

DamageScope: Vision-Language Retrieval at Scale for Disaster Damage Assessment from Satellite Imagery

cs.CV cs.CLcs.IR ·2026-08-21 ·Ravi K. Rajendran, Biplob Debnath, Murugan Sankaradas, Srimat T. Chakradhar
similarity 0.64
Abstract

Timely and accurate assessment of property damage is critical following natural disasters. Traditional on-site inspections are labor-intensive, costly, and often pose safety risks. Advances in satellite imagery and vision-language models (VLMs) enable scalable remote damage assessment; however, integrating VLMs into large-scale Earth observation pipelines presents challenges in computational efficiency, data organization, and information retrieval. To address these challenges, we present DamageScope, a retrieval-augmented framework that combines satellite imagery with Vision-Language Models (VLMs) and Large Language Models (LLMs) to automate property damage analysis. Built on a Retrieval-Augmented Generation (RAG) framework, DamageScope extracts structured visual representations from satellite imagery to support interactive natural language queries for damage assessment. To address scalability, we introduce a novel multi-vector embedding-based clustering algorithm that outperforms traditional single-vector embedding approaches while reducing indexing time by up to 14x. Furthermore, a dual-store data architecture minimizes LLM API calls, reducing both operational cost and response latency by up to approximately 3x. By effectively balancing scalability and operational efficiency, DamageScope provides a robust and practical solution for real-world damage assessment tasks.

0.35

GeBDA: Building Damage Assessment as Text-Based Sequence Prediction

cs.CV ·2026-08-28 ·Olivier Dietrich, Krishna Sapkota, Konrad Schindler, Genady Beryozkin
similarity 0.64
Abstract

Conventionally, Building Damage Assessment (BDA) is tackled either with dedicated network architectures or by fine-tuning geospatial image foundation models. In this work, we ask whether a general-purpose Vision-Language Model (VLM) can localize buildings and grade their damage through autoregressive sequence generation alone. We cast BDA as predicting a variable-length set of bounding boxes, each specified by its coordinates and a damage label. Our preliminary implementation, based on the open Gemma model, achieves promising damage mapping results from only bi-temporal satellite images and a suitable text prompt.

0.22

Shortcut Learning in Geospatial Foundation Model Embeddings for Cross-Disaster Damage Assessment

cs.CV cs.LG ·2026-10-09 ·Ali Shibli, Andrea Nascetti, Yifang Ban
publishedcode/data similarity 0.64
Abstract · NeurIPS REO Workshop 2026

Geospatial foundation models can support disaster damage assessment, but high accuracy on familiar disasters may hide shortcut learning: prediction from event or scene characteristics rather than evidence that transfers to a new disaster. We study embeddings from TerraMind, Prithvi-EO-2.0, DOFA, and DINOv3 on the multi-disaster datasets xView2 and BRIGHT. Holding out an entire disaster, instead of randomly splitting image tiles, reduces mean balanced accuracy from 0.807 to 0.638 on xView2 and from 0.818 to 0.568 on BRIGHT. Four sets of tests examine what information supports prediction: event and acquisition context, before/after image inputs, building count, and correct image pairing. Pre-event images remain predictive, and a classifier given only the annotated number of buildings reaches balanced accuracy of 0.629 and 0.653. Combining before/after features performs best on average on xView2, but does not improve over pre-only features on BRIGHT. Shuffling image pairs within the same disaster and damage class causes modest losses. Motivated by these findings, we test whether feature transformations learned only from training disasters improve generalization to unseen disasters. These transformations improve performance, with supervised contrastive learning performing best on xView2 and PCA on BRIGHT. Our results highlight the importance of evaluation on unseen domains for assessing model robustness and show that simple feature-level transformations can improve generalization. Code and experiments can be found at https://github.com/alishibli97/gfm-shortcut-learning.

0.51

AI-Based On-Board Maritime Object Detection for Earth Observation Payload Data Reduction on Versal Embedded Hardware

cs.CV cs.AI ·2026-10-08 ·Thomas Goudemant, Aurélien Bobey, Omar Hlimi, Marjorie Bellizzi
similarity 0.64
Abstract · 8 pages. Accepted at the 10th On-Board Payload Data Compression Workshop (OBPDC 2026), Barcelona, Spain, 12-14 October 2026

Very-high-resolution Earth-observation satellites acquire more data than they can store and downlink, while in maritime surveillance the vessels cover a tiny fraction of each scene. We study onboard vessel detection as a way to select what is downlinked, which reduces the data according to its content rather than coding every pixel; it is complementary to conventional onboard compression. The work follows three axes. (i) Data and algorithm: a controlled dataset is generated from 68 annotated Maxar scenes with 43 vessel classes, and a YOLOX-S detector is trained on it. (ii) Embedded deployment: the detector is quantized and deployed on the DPU of a Versal VC1902, with a limited loss of detection quality and a processing time of a few seconds per scene. (iii) Data reduction: we propose several downlink modes, from metadata only (box, class and score of each detection) to image crops around vessels, tiles holding detections, or the whole scene with a degraded background, and estimate from the measured detection errors the trade-off each offers between the vessels kept and the volume downlinked. On our dense harbor and coastal scenes, tiles keep 98% of the vessels with 29% of the scene volume, and crops 83% with 3%.

0.39