CS Paper Radar

Context without Commitment: Robust Dense Correspondence under Non-Rigid Deformation

Yuzhen He, Sara Homscheid

cs.CV ·submitted 2026-09-29 09:06 UTC · v1
code/data

Abstract

Non-rigid point-cloud registration aims to find the corresponding target point for each point on a deforming source surface. Point-level matching keeps the full target cloud available, but correspondence becomes ambiguous when different regions have similar local geometry. Regional or coarse-to-fine methods provide broader spatial context, but an incorrect regional match can exclude the correct correspondence before dense matching. We propose CoCo-Reg, which uses regional patches to enrich dense point features without allowing patch predictions to restrict the final point-level search. CoCo-Reg constructs farthest-point-sampled patches, exchanges geometric information within and between source and target, supervises patch similarity using identity-corrected point overlap, and projects the resulting regional information back to dense point features. The final registration stage still scores the full target cloud before global point-level candidate selection. On 726 held-out ModelNet10 objects across nine deformation levels, two established learning-based baselines obtain mean correspondence errors of 0.1993 and 0.1921, whereas CoCo-Reg obtains 0.0547. Relative to its point-level baseline, this is a 72.6\% reduction. CoCo-Reg achieves lower correspondence error on 92.3\% of paired test objects and reduces the mean fraction of points with error above 0.1 from 47.3\% to 17.3\%. Chamfer distance and HD95 decrease in the same direction, and CoCo-Reg remains lower across all tested deformation levels. These results support using regional context for dense non-rigid correspondence without imposing a hard patch-level restriction on the final search. Because evaluation uses one checkpoint per method, the reported gains characterize the complete systems rather than the isolated causal contribution of an individual component. Code will be made publicly available.

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Single-Parameter Point Cloud Registration using Truncated Lp Functions

cs.CV cs.RO ·2026-10-25 ·Seong Hun Lee, Patrick Vandewalle, Javier Civera
benchmark similarity 0.74
Abstract

We propose a novel method for robust point cloud registration with only one tunable parameter. Our method, dubbed TLP, uses truncated $L_p$ functions with different values of $p$ to assign priority scores to correspondences, select the hypothesis, and refine the final model. By leveraging the robustness of truncated functions, TLP effectively handles the high outlier rates commonly encountered in real-world 3D feature matching. We also exploit GPU parallelization to evaluate hypotheses efficiently, enabling registration from thousands of correspondences in under a second on average. With only one tunable parameter, our method offers greater practicality than multi-parameter methods that require dataset-specific tuning of several parameters. Evaluations on public benchmark datasets demonstrate that TLP achieves higher accuracy than state-of-the-art single-parameter methods. Furthermore, it outperforms two widely used multi-parameter methods on three of the four evaluated datasets while maintaining competitive runtime.

0.10

PARTE: Plane-Assisted Robust Transformation Estimation for Point Cloud Registration

cs.RO cs.CV ·2026-09-21 ·Abolfazl Babanazari, Carson Cramer, Tyler Summers, Carlos Nieto, Kaveh Fathian
code/data similarity 0.73
Abstract · 16 pages, 14 figures, 11 tables. Code: https://ariarobotics.github.io/parte/. Updated project website URL

Global point-cloud registration remains challenging when limited overlap, repetitive geometry, and sensor noise produce correspondence sets dominated by outliers. Planar regions are particularly difficult for conventional point descriptors and are therefore often suppressed or discarded before matching. We present PARTE (Plane-Assisted Robust Transformation Estimation), a global registration method that instead treats planar structure as complementary registration evidence. PARTE extracts planar patches and represents them using our novel Plane Context Histogram (PCH), a descriptor that encodes the geometry surrounding each patch, while a two-level matching procedure identifies reliable plane correspondences. Candidate point and plane correspondences are combined in a confidence-weighted compatibility graph for joint outlier rejection, followed by rigid transformation estimation. When no usable plane correspondences are available, PARTE naturally reduces to point-only registration. We evaluate PARTE on 8,097 registration pairs across six indoor and outdoor benchmarks spanning dense RGB-D and sparse LiDAR measurements. Evaluations show PARTE achieves the highest overall success rate against 13 standard and state-of-the-art methods while maintaining low runtime. An open-source C++ implementation with Python bindings is provided at https://ariarobotics.github.io/parte/.

0.50

Joint Rigid Alignment and Morphable Reconstruction from Partial 3D Face Scans

cs.CV ·2026-10-29 ·Eli A. Underwood, Nicolas Rondan, Angel V. Peterchev, J. Matias Di Martino
code/data similarity 0.73
Abstract · 9 pages, 4 figures, 4 tables

Aligning a partial, real-world 3D face scan to a canonical representation requires solving two coupled problems at once: estimating the rigid pose that brings the scan into a common frame, and completing the facial shape in regions the scan never observed. Existing pipelines typically decouple these steps, running a generic point-cloud registration front end followed by a separate non-rigid fitting or deformation stage. Building on the GeoTransformer superpoint-matching architecture, we propose a single network that predicts both a rigid pose and a shape-complete point cloud in one forward pass: a cross-attention regressor, conditioned on transformer point features and predicted coarse correspondences, maps a partial scan to per-patch coefficients of a 3D morphable face model learned offline from a corpus of 8,000 identities. The resulting morphed template is then used, in the same forward pass, as the target for fine-grained Sinkhorn matching and rigid pose estimation, supervised purely by geometric alignment to ground-truth morphed geometry, so no hand-labeled coefficients are required. Against six classical and learned non-rigid registration baselines on held-out identities, our method leads the strongest ones by 3-4 times on per-vertex error and baselines that collapse the head onto the visible region by more than an order of magnitude, and is simultaneously the most accurate and fastest method on ground-truth-free scans from two independent real-scan datasets, NoW and NPHM. Code will be made publicly available.

0.27

SparseGraph-I2P: Consistency-Guided Hypothesis Selection for Efficient Image-to-Point-Cloud Registration

cs.CV cs.MM ·2026-11-03 ·Ziyang Yu, Xiang Li, Qiong Chang, Jun Miyazaki
similarity 0.71
Abstract · 20 pages

Coarse-to-fine image-to-point-cloud (I2P) registration risks discarding correct but ambiguous patch pairs, while retaining more candidates repeats fine matching over overlapping patches. SparseGraph-I2P aims to improve registration recall by increasing the inlier ratio at the pose solver, using sensor or monocular depth. A Coarse Hypothesis Graph combines appearance with depth-derived first- and second-order compatibility to select a fixed budget of patch pairs. Sparse Fine Matching decodes each queried pixel once and skips pixel--point comparisons covered by an ancestor patch paired with the same point-cloud region. With sensor depth, depth-aware filtering ranks correspondences by SC2 spectral support for a single EPnP solve. With monocular depth, depth or inverse depth is calibrated from correspondence geometry before filtering. SparseGraph-I2P achieves the highest registration recall and lowest latency among the compared methods on RGB-D Scenes V2 and 7-Scenes with sensor depth. With predicted depth, it retains the highest recall on RGB-D Scenes V2 at an additional calibration cost. Code will be released.

0.28

SAGE: Semantic-Augmented Geometric Experts for Point Cloud Registration

cs.CV ·2026-10-27 ·Tomoyasu Shimada, Kazuhiko Murasaki, Shoichiro Takeda, Shogo Sato, Riku Inoue +2 more
published similarity 0.71
Abstract · Accepted to WACV 2027 (Round 1)

Point cloud registration is an essential task for scene reconstruction, requiring the alignment of partially overlapping point clouds. Under low-overlap conditions, this task remains challenging because existing geometry-only methods cannot distinguish geometrically similar but semantically distinct structures (e.g., TV corners vs. desk corners and chair legs vs. table legs), resulting in incorrect correspondences. To address this geometric ambiguity, we present Semantic-Augmented Geometric Experts (SAGE), which integrates frozen pre-trained point cloud semantic representations into the registration pipeline without requiring additional sensors or fine-tuning the semantic encoder. To effectively leverage these semantic distinctions, SAGE employs a Semantic-Guided Mixture of Experts (SG-MoE) architecture. Through semantic-aware routing, SG-MoE enables each expert to specialize in distinct semantic-geometric patterns, reducing mismatches that confound geometry-only methods. With a structure-aware estimator, SAGE achieves the highest registration recall on 3DLoMatch while remaining competitive on 3DMatch. When evaluated with the same number of refinement iterations, SAGE further achieves the highest inlier ratio and registration recall on both benchmarks. These results indicate that frozen semantic representations provide effective cues for resolving geometric ambiguity in low-overlap registration.

0.33

TokenMatch: 3D Mesh Correspondence Transformer with Curvature-Guided Tokenisation

cs.CV ·2026-09-03 ·Adeela Islam, Zorah Lähner, Vittorio Murino, Vladislav Golyanik
code/data similarity 0.71
Abstract · 25 pages, 13 figures and 12 tables; project page: https://4dqv.mpi-inf.mpg.de/TokenMatch/

While data-driven 3D shape correspondence estimation has recently seen substantial progress, robust matching under partial observations and strong non-isometric deformations remains challenging. Existing learning-based approaches often rely on hand-crafted descriptors or template-based representations, whereas recent generative models over functional maps suffer from high inference cost, limited interpretability, and poor generalisation to partial shapes. In response to these limitations, this paper introduces TokenMatch, a new transformer-based unified model for estimating 3D shape correspondences. Our feed-forward approach trained exclusively on BeCoS, a challenging non-isometric partial-to-partial shape-matching dataset, can generalise to matching full shapes without retraining or fine-tuning. TokenMatch uses self- and cross-attention mechanisms to efficiently learn patch-level and point-level relations as well as dense correspondences between shape pairs. Our core insight is that meshes can be adaptively tokenised into patches using shape curvature guidance, enabling effective learning of shape-specific geometric descriptors for correspondence estimation. We evaluate TokenMatch on standard benchmarks for partial and full shape matching, including CP2P, PSMAL, BeCoS, FAUST, SCAPE, and SHREC'19. Our method achieves consistently high performance, in most cases outperforming existing methods for partial and full shape matching in the mean geodesic error and intersection-over-union metrics, while also running faster at sub-second inference speeds.

0.42

GRIP: Gaussian Rendering as a Cross-Modal Bridge for Image-to-Point Cloud Registration

cs.CV ·2026-09-22 ·Karim Slimani, Catherine Achard, Eric Marchand, Brahim Tamadazte
similarity 0.70
Abstract

This paper introduces GRIP, a pose-conditioned refinement framework for pixel-to-point matching and 2D to 3D registration. Given an initial coarse pose estimate, GRIP addresses the structural mismatch between grid based image descriptors and unordered point cloud descriptors by softly rendering learned 3D point features onto the image grid through Gaussian feature splatting. The rendered point derived feature map is then fused with image features by a pixel aligned transformer, enabling visual semantic and geometric cues to interact in a shared 2D representation. The refined features are decoded and propagated to finer resolutions for dense correspondence estimation and final pose refinement. Experiments on RGB D Scenes V2 and 7 Scenes demonstrate state of the art inlier ratio and competitive registration recall, with stronger performance under stricter evaluation thresholds.

0.14

DPA-I2P: Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration in Autonomous Driving

cs.CV ·2026-08-27 ·Wenxin Zhang, Hang Li, Zhiwei Xu, Qiankun Dong, Gang Wang +1 more
similarity 0.69
Abstract

Image-to-Point Cloud Registration aims to estimate the camera pose of a given image within a 3D scene point cloud, which is a fundamental task in autonomous driving and large-scale outdoor localization. Recent implicit correspondence learning methods have improved registration performance by learning cross-modal alignment in an end-to-end framework, leading to more accurate camera pose estimation. However, due to the inherent modality discrepancy between images and sparse LiDAR point clouds, reliable cross-modal correspondence learning remains challenging. To address this issue, we propose Depth-Guided Projective Alignment for Image-to-Point-Cloud Registration (DPA-I2P). Unlike naive depth or feature concatenation, Ray-Conditioned Metric Depth Encoding (RMDE) and Projection-Consistent Vision Lifting (PVL) exploit depth and visual cues in a structured, geometry-aware manner. In addition, Cross-Modal Query Pruning (CQP) suppresses unreliable queries during early refinement to improve matching stability. Experiments on KITTI and nuScenes demonstrate the effectiveness of the proposed method. On KITTI, DPA-I2P reduces RTE and RRE by 45.0% and 55.6% over the strongest implicit baseline, respectively. On nuScenes, DPA-I2P also improves registration accuracy over the evaluated baselines, suggesting better transferability to different driving scenes.

0.08