CS Paper Radar

Visual Anomaly Synthesis for Model Selection in Data Scarcity

Daniel Pröll, Thomas Kraxner, Tobias Schaefer, Sebastian Hegenbart

cs.CV ·submitted 2026-09-29 12:22 UTC · v1

Abstract

Defect detection systems for industrial condition monitoring can only be relied upon if they are validated, yet defective samples are rare and, for a specific asset, often nonexistent. We present a framework that synthesizes severity-graded defects on real non-defective images without any defect references for the target asset, that can be used for model selection and validation. A defect taxonomy for common failure modes is distilled from literature into prescriptive prompts at varying defect severities. Regions of interest are cropped from in defect-free images and edited with a pre-trained image generation model ("FLUX.2 [klein]"). Color-matching and blending are employed to improve structural coherence with the original image. Generations are filtered out by a scorer and by estimated detection difficulty. Model selection experiments on MVTecAD show image AUROC choice regret over model selection can be nearly halved compared to the best fixed model chosen with access to test data. Experiments show the need for severity-graded anomaly synthesis. A case study investigates the proposed method for in-situ monitoring of Pelton turbine runners in hydropower, where real defect images are rare and expensive to collect. A PatchCorebased anomaly detection model is fit on Pelton turbine images and selected and validated using synthetic images, showing strong detection performance (94 % correct detection at optimal threshold and AUROC 0.97). The model reliably detects moderate and advanced defects, while early-stage defects remain challenging, indicating the synthetic data meaningfully stresses detector sensitivity.

Closest papers

Nearest neighbours by meaning across the whole index.

FLASH: A "Generate Once, Synthesize Many" Framework for Synthetic Anomaly Generation in Industrial Anomaly Detection

cs.CV ·2026-09-29 ·Abhay Kumar Das, Rajesh Gangireddy, Ashwin Vaidya, Samet Akcay
publishedtheory similarity 0.67
Abstract · Accepted to the IEEE/CVF Winter Conference on Applications of Computer Vision (WACV) 2027

Synthetic anomaly generation helps expand industrial anomaly datasets when real defects are scarce or unavailable. Existing approaches lie at two extremes: procedural approaches are fast but struggle to represent complex anomalies, while generative approaches produce diverse defects but require costly per-sample generation. We present FLASH, a framework that decouples defect generation from anomaly synthesis under a ``generate once, synthesize many'' paradigm. Given only normal images, FLASH uses Vision-Language Model (VLM) guidance and an image-generation model to produce a small set of defect images, from which it extracts, validates, and banks reusable defect patches. For synthesis of anomalous images, Object Boundary Suppression (OBS) first identifies the probable foreground object-aware region of the host image, while Multi-Resolution Spectral Pyramid (MRSP) noise generates diverse, size-controllable masks that determine the defect location and spatial extent. It then composes a large and diverse synthetic anomalous image set by localizing the defect region, sampling size-controllable placement masks and seamlessly blending retrieved defects onto new defect-free images without further need for image generation. Experiments on the MVTec AD 2 dataset show that FLASH-generated anomalies nearly close the calibration gap on real defects, reaching 78.1% image-level F1 against an 83.6% real-anomaly upper bound and providing the most consistent calibration transfer across detectors among procedural and generative alternatives. Moreover, FLASH synthesizes anomalies more than 11.95x faster than per-sample generative approaches.

0.31

Beyond CLIP: Calibrated (Few-Shot) Defect Detection With System One Decision Models

cs.CV cs.AI ·2026-10-30 ·Fadel M. Megahed, Ying-Ju Chen
similarity 0.65
Abstract · 10 pages, 5 figures

Cameras and vision sensors are widely used for product and process inspection in manufacturing environments. Traditionally, this process required thousands of images of both nominal and defective products to train such models. Recent research shows that vision transformer (ViT) models, such as CLIP, can reduce this requirement to 50-100 images per nominal and defective class. However, collecting even 50 defective images can be difficult in high-yield or low-volume manufacturing processes. In this paper, we examine the utility of two recently proposed structured decision models (Jev and Clef-Flash) in applications using as few as k=2 reference images per class at inference. In the process, we provide three main contributions: (a) a framework for k-shot learning of these models for image classification/inspection applications; (b) an agentic approach for automatically refining the text descriptions that guide image classification in these decision models; and (c) an approach to calibrate the resulting defect probabilities to improve their reliability for inspection decisions. We test these contributions in five manufacturing case studies. Using two reference images per class, both Jev and Clef-Flash outperform CLIP's test accuracies with the same references (0.75-1.00 [Jev] and 0.71-0.99 [Clef-Flash] vs 0.67-0.84 [CLIP]). Furthermore, we show that our agentic refinement of text descriptions significantly improves accuracy across 6 of 8 model-application combinations, and our calibration approach reduces the Brier score in 13 of the 15 model-application configurations. To support the reproducibility of our work, we provide our replication code and have created the R "decisions" package for evaluating additional models. We also provide a publicly available web app that allows practitioners to inspect their own images with no code.

0.26

Robust Logical Anomaly Detection under Capture Shifts via Synthetic Anomalies

cs.CV cs.LG ·2026-10-13 ·Ufuk Efe, Alptekin Temizel
benchmark similarity 0.64
Abstract · 42 pages, 10 figures, 15 tables

Detectors of logical anomalies, such as missing, extra or wrongly combined parts, usually score a test image by its distance from normal (good) images. They achieve near-perfect image-level AUROC on standard industrial anomaly detection benchmarks such as MVTec LOCO, but their robustness to changes in capture conditions remains largely unexamined. Under a heterogeneous perturbation protocol in which each test image is randomly kept unaltered or subjected to a brightness reduction or a zoom-out transformation, the normal-reference methods we tested lose 9.7 to 34.1 AUROC points, and two of the strongest, CSAD and SALAD, fall from 97.7% and 96.4% to 68.1% and 62.3%. We propose a framework in which a classifier, trained on normal images and on synthetic anomalies, scores a test image without comparing it with normal data. From a short description of each product, a language model derives anomaly types and editing instructions, an image editor applies them to normal images, and the classifier learns to separate the edited images from automatically discovered normal sub-modes. With its full training recipe, the framework reaches 94.9% AUROC on clean images, 1.5 to 2.8 points below SALAD and CSAD, and 94.1% under the perturbation protocol. Trained without brightness or zoom-out augmentation, so that neither test perturbation occurs in training, it still reaches 92.5% (93.2% clean). These results suggest that clean benchmark scores can hide a strong sensitivity to capture conditions, and that learning the decision from both normal images and rule violations may reduce it.

0.14

REDiff-AD: No Training and No Target Masks for Industrial Anomaly Image Generation via Diversity-Driven In-Context MMDiT

cs.CV ·2026-11-07 ·Chih-Yu Tsai, Chih-Heng Chang, Jian-Jiun Ding
publishedcode/data similarity 0.63
Abstract · Accepted to WACV 2027

Industrial anomaly detection is challenged by the scarcity and diversity of real defects, leaving insufficient anomalous data to effectively train downstream models. Existing anomaly generation methods often require product-specific fine-tuning, target mask annotation, or costly procedures to achieve realistic and diverse defects. We propose REDiff-AD, a framework that requires neither model training nor target masks and introduces Rectified Flow MMDiT into industrial anomaly generation for efficient sampling with fewer generation steps. Given a normal product image and a single masked reference anomaly, REDiff-AD employs in-context learning to transfer the defect appearance from the reference into the normal image. Internal attention signals generated during this process are further reused to localize the synthesized anomaly, while edge and color cues refine the localization into pixel-level pseudo-masks. Two lightweight modules further improve generation quality: adaptive reference conditioning enhances defect fidelity, while diversity guidance promotes varied defect patterns without additional training. Experiments demonstrate that REDiff-AD can well address the tradeoff between realism and diversity for anomaly pattern generation and achieve competitive downstream anomaly classification, detection, and localization performance. These results show that REDiff-AD is a simple, efficient, and effective solution for large-scale anomaly data augmentation and pixel-level data construction. Github code: https://github.com/efdefe4-droid/REDiff-AD

0.39

Training-Free Logical and Structural Anomaly Detection via Calibrated Fusion

cs.CV ·2026-09-04 ·Changyi Li, Miao Yu, Kai Dong, Yu Xiao
published similarity 0.59
Abstract · Accepted by PRCV 2026

Industrial anomaly detection must handle two distinct defect families: structural anomalies, which manifest as local texture corruptions, and logical anomalies, which violate global rules on object count, composition, or arrangement. Existing detectors typically favor one family at the expense of the other. In particular, training-free methods effectively exploit frozen representations but lack an explicit notion of object count, while methods that reason about counts usually rely on category-specific component modeling. We show that counting ability can be introduced into training-free anomaly detection without additional training or part-level supervision. Our key idea is a normal-set calibration that aligns heterogeneous anomaly cues using statistics from normal images, enabling their direct fusion within a unified training-free framework. Built upon this calibration, our detector combines complementary frozen cues to address both logical and structural anomalies. On MVTec-LOCO, our method achieves image-level AUROCs of 89.0 and 95.9 on logical and structural anomalies, respectively, yielding a 92.5 average---the best among training-free detectors in our comparison. It remains competitive with methods requiring network training or part annotations, while its structural variant matches PatchCore on MVTec-AD (99.1 image-AUROC), suggesting that the proposed calibration generalizes beyond logical anomaly detection.

0.27

Robust Online Aero-Engine Blade Defect Detection via Dual-Alignment Test-Time Adaptation

cs.CV ·2026-09-04 ·Zhaoyang Wang, Haiyong Chen, Dongying Li, Yining Wang, Huapeng Wu +2 more
published similarity 0.59
Abstract · This manuscript is Accepted at conference PRCV 2026

Reliable visual inspection is essential for quality assurance in aero-engine blade manufacturing, where defect appearance may vary across production lines, imaging conditions, blade poses, and surface backgrounds. Such domain shifts cause a mismatch between training and deployment data and degrade the reliability of deep defect detectors in online inspection. This problem is particularly challenging because aero-engine blade images usually contain sparse defects, making pseudolabel-based adaptation vulnerable to noisy or missing predictions. To address this issue, we propose Aero-engine Blade Defect Detector (ABDD), an online adaptive detection framework based on test-time adaptation. ABDD introduces a Dual-Alignment Strategy to jointly adapt global visual style and local defect morphology by combining feature-statistics alignment with pseudo-box alignment. To reduce error accumulation from unreliable pseudo labels, an Uncertainty-aware Box Filtering mechanism evaluates pseudo boxes using classification confidence, classification entropy, and localization entropy. In addition, a lightweight Sparse Dilated Mona module enables parameter-efficient delta tuning while limiting source-domain forgetting. ABDD is evaluated on CD-AeBD and HD-AeBD under multiple domain-shift scenarios, with TTA strategies compared under a unified RT-DETR + Swin-T architecture. Experiments show that ABDD consistently improves detection robustness under domain shifts, and its practicality is further validated on an industrial inspection platform.

0.30

VerdictAD: Few-Shot Anomaly Detection via Decision-Guided Refinement

cs.CV ·2026-11-02 ·Shangquan Sun, Wenjun Luo, Yuanzhi Wang, Ruiqi Li, Ruoyu Chen +2 more
code/data similarity 0.59
Abstract · Preprint with 5 tables and 7 figures. Code and experimental logs available at https://github.com/sgstq0811/VerdictAD-Jev-AD

Detecting defects in real-world industrial inspection often requires learning from only a few normal images per category. Recent few-shot anomaly detection methods have achieved strong performance by measuring feature differences between query images and normal references. However, visual differences do not always indicate genuine defects, as normal appearance variations can also produce high anomaly scores. Conversely, structural or logical anomalies may not produce strong local feature differences, making them difficult to detect. To address this limitation, we introduce VerdictAD, a training-free framework that refines existing anomaly detectors through visual decisions. Rather than replacing existing detectors, VerdictAD adopts a typed decision model to assess the query image and its local regions against a few normal references. By directly producing structured decision probabilities without text generation, the model provides complementary evidence for refining anomaly responses at different spatial scales. Building on this capability, we introduce two modules: Global Verdict Refinement (GVR) uses image-level decisions to refine the overall anomaly score, while Local Verdict Refinement (LVR) aggregates regional decisions to refine the anomaly map. Combined with a simple DINOv2-based detector, VerdictAD achieves competitive performance in one-shot and few-shot anomaly detection. More importantly, as a plug-and-play framework, it consistently improves existing anomaly detectors across MVTec AD, VisA, and MVTec LOCO AD, achieving strong results across one-shot and few-shot settings. Our code and experimental logs are publicly available at https://github.com/sgstq0811/VerdictAD-Jev-AD.

0.30

Cross-Scenario Industrial Defect Detection via Domain-Robust Training and Metric-Aligned Selection

cs.CV ·2026-10-14 ·Dikai Li, Weijia Wang, Yuan-Gen Wang
top venuecode/data similarity 0.59
Abstract · This paper has been accepted for presentation in IEEE ICME 2026

Automated defect detection of industrial boards must remain highly reliable under cross-scenario variations in lighting, surface contaminants, and production line conditions. This makes cross-scenario defect detection a domain generalization problem, wherein models are required to detect, localize, and classify defects across unseen scenarios while minimizing false alarms on clean boards. For the IDA 2026 Track 1 challenge, we propose a cross-scenario defect detection method that includes four complementary modules: cross-scenario robust training, small-defect-aware learning, score calibration and inference threshold selection, and metric-aligned checkpoint selection. These four modules respectively introduce cross-scenario robust normalization and DSU-style statistic perturbation with progressive random convolution, NWD and parameter-free spatial attention, the VFL learning objective, and a custom SWAD variant driven by the Track 1-oriented proxy. Experimental results demonstrate that our model achieves a Track 1 score of 0.564 with a screening score of 0.696 on the test dataset on a single RTX 4090 GPU. The code is available at https://github.com/GZHU-DVL/Dikai.

0.40