CS Paper Radar

HandAnthro: Automated Hand Anthropometry from a Single Image

Fan Zhou, Shuairan Chen, Mengying Zhang, Yulin Wu, Sadegh Jafari, Sixing Yu, Rui Li, Ali Jannesari, Guowen Song

cs.CV cs.AI ·submitted 2026-09-29 15:43 UTC · v1

Abstract

Hand anthropometry supports protective-glove design, but existing measurement methods often require trained operators, specialized hardware, or manual landmarking. We present HandAnthro, which estimates 44 projected hand dimensions from a smartphone photograph of a palm-up hand on US letter-size paper. The pipeline reconstructs wrist-occluded paper boundaries for rectification, whitens non-hand pixels, and refines 41 anthropometry-specific landmarks from a fine-tuned You Only Look Once (YOLO) pose model using image-specific geometry and contours. Controlled evaluation comprised 720 captures from 45 held-out participants, each contributing 16 images across two smartphones, two backgrounds, two angles, and two nominal illumination settings. HandAnthro produced complete outputs for 704 captures (97.8%); among these, mean absolute error (MAE) was 3.80 mm per dimension against two trained operators' caliper measurements. Regional MAEs were 2.48 mm for non-thumb fingers, 6.04 mm for thumbs, and 6.17 mm for palm and wrist. In a researcher-assisted mobile-app pilot, automated batch processing returned all 44 dimensions for 260 of 268 retained, researcher-screened firefighter images (97.0%). A descriptive, unpaired comparison with an independent national firefighter reference yielded a mean absolute difference of 2.40 mm across 28 sex-by-dimension group-mean contrasts. These results characterize controlled measurement performance and researcher-assisted field feasibility for future distributed hand-anthropometry studies.

Comment
21 pages, including 7 pages of main text and references and 14 pages of supplementary material

Closest papers

Nearest neighbours by meaning across the whole index.

Fast and Accurate Hand Estimation in Pixels, Interaction and World Space

cs.CV cs.RO ·2026-11-05 ·Jinkun Cao
code/data similarity 0.69
Abstract · 10 pages of main text plus 15 pages of supplementary material; 5 figures; 12 tables; code available at https://github.com/noahcao/FAH

Monocular hand mesh estimators commonly predict rig parameters and project the mesh to obtain 2D keypoints. We find that directly predicted 3D joints agree better with 2D predictions, and fitting a mesh to predicted points reduces mesh error. We present FAH (Fast and Accurate Hand Estimation), a family of models built on SAM 3D Body's hand branch through fine-tuning and feature distillation. The models predict corresponding 2D and 3D joints and surface points, fit MANO or MHR-Hand, and optionally estimate anatomical parts and contact without object geometry at inference. Causal refinement reduces acceleration error, and camera estimation places the hands in world space. Experiments show improvements in image-space alignment, hand geometry, contact estimation and world-space tracking over the evaluated baselines. The default ViT-L model runs at 65 fps with mesh fitting on an RTX 4070 Ti SUPER, or 49 fps with parts and contact enabled. The smallest ViT-S model reaches 125 fps without mesh fitting, parts or contact. Code: https://github.com/noahcao/FAH.

0.58

S2HAND: Accuracy-Preservation Trade-Offs for Hand Specialization in Whole-Body Pose Models

cs.CV ·2026-11-07 ·Singyu Muk, Xuanren Song, Kalin Stefanov
code/data similarity 0.66
Abstract · 39 pages, including appendices. Code and models: https://github.com/ronggong000/S2HAND

Unified whole-body pose estimators jointly predict body, face, and hand landmarks, but often degrade on small, blurred, or occluded hands. Attaching a standalone hand specialist introduces extra detection overhead, coordinate alignment, and wrist-stitching artifacts. We introduce S2HAND, a hand-specialized Sapiens2-5B framework that preserves the native 308-keypoint output interface. Specifically, S2HAND-MT adapts a lightweight 0.87M-parameter pose branch to route 40 finger heatmaps while strictly preserving the shared Transformer, auxiliary task heads, and the other 268 body, foot, and face heatmaps. S2HAND-Pose further fine-tunes three Fisher-selected Transformer blocks (267.13M parameters), trading exact preservation for stronger hand recovery: it lifts macro AUC from 57.83% to 65.73% across HInt TEST, COCO WholeBody VAL, and FreiHAND EVAL, and surpasses HInt-adapted Hand5/HRNet and stitched Hand5 systems on all five Native Pipeline benchmarks. On COCO, S2HAND-Pose improves hand AP by 12.89 points and body-plus-foot AP by 0.19 points. Across a 512-image multi-task audit, it maintains 99.60% foreground segmentation agreement with the public checkpoint, with quantified normal and pointmap drift. Its 2D coordinates also lower 3D mesh error in frozen Pose2Mesh transfer, while our optional TailGuard re-cropping module cuts S2HAND-MT's severe failure rate on NewDays from 13.45% to 10.43%. S2HAND thus resolves the whole-body hand bottleneck with either exact non-hand preservation (MT) or empirically audited trade-offs (Pose).

0.33

Hand in Silhouette: Synthetic-to-Real Multi-View Hand Reconstruction via Binary Masks

cs.CV ·2026-11-12 ·Leiyao Cui, Lecheng Ruan, Zihang Zhao
code/data similarity 0.65
Abstract · Project page: https://silhand26.github.io

Calibrated multi-view hand reconstruction has advanced rapidly, yet the effectiveness of existing methods depends strongly on real captured data, which is costly to acquire, limited in hand-geometry diversity, and often affected by imperfect annotations. Synthetic data offers a scalable alternative with accurate supervision, but a substantial synthetic-to-real appearance gap hinders its use. To address this, we introduce Hand in Silhouette (SilHand), a calibrated multi-view hand reconstruction framework that operates on binary hand masks, obtainable at low cost either automatically or manually, to reduce the synthetic-to-real observation gap. Rather than relying on RGB features for 3D lifting, SilHand projects metric 3D hypotheses into each view to query and fuse mask-ray evidence for hand reconstruction. This mask-centric formulation enables training on a large-scale synthetic dataset comprising 46.8k grasping poses and 60k free-hand samples, providing broad coverage of hand geometry while directly transferring to real captured hand geometry. Across five real-world benchmarks, SilHand improves relative reconstruction accuracy from 49.2% to 63.4% using masks rendered from reference hands. Moreover, reconstruction accuracy improves consistently as the synthetic training set grows, indicating that broader geometric coverage translates into better real-world performance. While achieving such diversity is difficult with real captured data, it becomes practical under our mask-centric formulation. Finally, SilHand remains robust under mask corruption, with reconstruction error increasing by at most 1.63 mm. Together, these results support binary masks as an effective interface for learning hand reconstruction from synthetic geometry.

0.17

HandRSI: Recursive Self-Improvement for Hand Pose Estimation

cs.CV ·2026-11-17 ·Zhekai Wang, Luqing Luo, Wenhao Yao, Junjie Lu, Huanan Zhu +2 more
benchmarkcode/data similarity 0.65
Abstract · Technical report. 25 pages, 17 figures, 18 tables. Code: https://github.com/GinKenneth/Hand_RSI

Egocentric 3D hand pose estimators still miss hands at the image border, misplace occluded hands and jitter. Such failures are usually fixed by hand-written inference refinements and by fine-tuning, two interdependent steps that are tuned separately. We present HandRSI, a recursive self-improvement framework for a hand pose system that consists of a video estimator and its executable inference harness. In each round, coding agents refine the harness, and a change is accepted only if it improves a composite of all ten benchmark metrics on held-out data without significantly regressing any of them. The accepted harness then guides the estimator through selective distillation, which supervises hand presence and temporal consistency on frames without ground truth, while ground truth supervises pose. Since the updated estimator may change which refinements remain useful, the harness is re-validated on it. Starting from the released ACE-Ego-Hand model, five rounds reduce MPJPE-p by 35% on HOT3D and 11% on ARCTIC and roughly halve jitter. On HOT3D, HandRSI's MPJPE-p is 16% lower than that of ACE-Ego-Hand fine-tuned on the same ground truth. Under a unified protocol, it outperforms nine re-run published methods on all ten metrics of both benchmarks. Hypervolume selection on the accuracy-speed front yields Lite, Medium and Heavy systems running at 20.7 to 41.1 FPS. This report gives the full method, every stage of every round and the complete protocol. Code, evaluator, harnesses and weights are public.

0.46

PalmSpace: Towards a Versatile On-Palm Interaction Space through Unified Touch Modeling

cs.HC cs.CV ·2026-10-07 ·Chentao Li, Mingze Gao, Runze Sun, Zhaoguo Wang, Jianjiang Feng +1 more
similarity 0.64
Abstract · Preprint. Initial version

As smart glasses and lightweight MR devices become increasingly practical, input remains a key challenge. The bare palm is an always-available, tactile, and proprioceptively accessible surface, but it has neither an explicit coordinate system nor embedded touch sensing. Prior on-palm systems typically expose isolated touch events, discrete regions, continuous trajectories, or task-specific gestures, limiting the palm's ability to support precise selection and gesture manipulation through a common input representation. We present PalmSpace, a wrist-worn infrared system that exposes mode-aware, body-referenced absolute input on the bare palm without per-user sensing calibration. At the interaction level, PalmSpace jointly represents contact occurrence, interaction mode, and palm-referenced absolute location; at the model level, it learns these coupled outputs through a shared real-time representation. In leave-one-participant-out evaluation with 17 participants, PalmSpace achieved 6.7 mm mean localization error, 98.9% contact detection accuracy, and 96.7% F1 for four-class interaction-state recognition. User studies further demonstrated absolute pointing and dragging, eyes-free digit input, and representative multi-finger controls including scrolling and pinch-based map manipulation. These results show that a morphologically variable bare palm can function as a transferable, mode-aware interaction surface.

0.17

EgoHand: Monocular 3D Hand Reconstruction from Egocentric Video

cs.CV cs.LG ·2026-10-21 ·Chao-Yeh Chen, Tiffany Chen, Lin Duan, Tianyi Hu, Yu-Hsiang Huang +10 more
code/data similarity 0.64
Abstract · Authors are listed alphabetically. Project leads are Chao-Yeh Chen, Tiffany Chen, and Umar Iqbal https://github.com/NVIDIA/IsaacCapture/tree…

We introduce EgoHand, a monocular 3D hand reconstruction model that achieves state-of-the-art performance on egocentric video. Central to our approach is the curation of a high-quality training corpus of 14 million images, combining synthetic data, in-the-wild video, and multi-camera motion capture to balance scene diversity and supervision quality. The model adopts SOMA-Hand as its parametric representation and processes 2D hand crops with a transformer encoder, incorporating camera cues and an auxiliary 2D branch to improve geometric consistency and image alignment. Zero-shot evaluations on HOT3D, ARCTIC, and H2O demonstrate strong out-of-domain generalization, with lower joint-position, root-translation, and acceleration errors than competing baselines at an inference latency of approximately 9.01 ms. A blinded user preference study further shows that participants favor EgoHand's reconstructed hand poses over those from Apple EgoDex and Ropedia Xperience-10M. We release the EgoHand model and source code under the OpenMDW license, allowing free commercial use of the model.

0.23

EgoWholeView: Camera-Only Head-Mounted Capture of Body and Bimanual Hand Motion for Embodied Demonstrations

cs.CV ·2026-10-12 ·Yaoqing Hu, Xuguo He, Daohan Cui, Yukun Shi, Kai Chen
benchmark similarity 0.63
Abstract · 17 pages, 9 figures

Head-mounted body and bimanual motion capture supports self-avatars, teleoperation, and embodied demonstrations. However, a single egocentric camera is vulnerable to a limited field of view, scale ambiguity, and hand-object occlusion. We present EgoWholeView, a wearable capture system of six synchronized wide-angle RGB cameras with a role-specialized pipeline. The outward views localize the rig in a world frame, while an overlapping downward pair independently predicts SMPL-X body and MANO hand parameters. Both predictors are adapted to egocentric fisheye data. To combine the two, reliability cues measured from the predictions themselves weight the fusion of body and hand joint rotations, while shape is aggregated across views and frames. The pair's baseline fixes metric scale, and triangulation recovers root translation. Relative to monocular prediction, fusion reduces PA-MPJPE by 3.7% for the body and 11.2% for the hands, and temporal refinement lowers angular-acceleration magnitude by 32.2% and 31.0%, respectively. On our six-camera recording, the pipeline produces body and hand states in a shared world frame using benchmark-fitted gates without retuning, and temporal refinement lowers hand acceleration magnitude by 41.08%. Using only RGB cameras and no third-person view, EgoWholeView offers a low-cost, portable route to egocentric interaction data.

0.35

EgoFound3R: End-to-End Egocentric Hand Reconstruction in World Space with Point-Wise Interaction Attributes

cs.CV ·2026-10-01 ·Hongming Fu, Jingcheng Shi, Wenjia Wang, Binhua Zuo, Bo Zhao
similarity 0.63
Abstract

Egocentric video has become a primary source of supervision for embodied models, and its value rests on recovering hand motion in world coordinates, which camera motion and hand occlusion make difficult. Existing reconstruction pipelines typically separate hand and scene estimation, leave interaction attributes to separate task-specific models, and invoke several models per video, so no prior reconstruction model estimates these attributes and throughput becomes a practical constraint on large-scale annotation. We therefore introduce EgoFound3R, a unified end-to-end model that estimates world-space hand geometry in a metric scale shared with the scene, and predicts point-wise interaction attributes, including visibility, contact, and distance. The model integrates three designs: (i) structured hand prompts that transfer pretrained geometric priors to world-space hand reconstruction; (ii) an explicit hand representation that decodes hand geometry and interaction attributes; and (iii) a shared-parameter multi-rate design that lowers inference cost. Together, these designs predict hand geometry and point-wise attributes in one pass. On OakInk-v2, TACO, and HOI4D, EgoFound3R reduces the mean per-joint position error (MPJPE) by 43.2%, 22.4%, and 11.6% over previous methods and predicts point-wise contact and distance alongside the geometry in the same pass, while attaining approximately 6x higher throughput.

0.15